P
PrintablesCarlos
hdzero lux canopy
Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…
- Pobrania
- 441
- Polubienia
- 18
- Ocena
- 0
Wyniki wyszukiwania: hdz
Liczymy pasujące modele…
P
PrintablesMDHR
HDZero Goggles Case With TPU Insert & Logo (optional)
This is the fantastic Rugged Box by @whity adapted to the HDZero goggles. It includes enough space to accommodate the expansion bay on the side, in theory (I don't have one to test). Also includes an area for cords, antennas, etc. You…
- Pobrania
- 378
- Polubienia
- 55
- Ocena
- 5
P
Printablesedwardsch
Tressym Joker tinywhoop canopy (supports DJI O4 Lite, BetaFPV P1, HDZero Lux, HDZero Eco, NBD BeeEye, BetaFPV C03, Tinywhoop Pinch, Caddx Ant Lite)
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
- Pobrania
- 367
- Polubienia
- 32
- Ocena
- 4,5
P
PrintablesJorg1d
HDZero Whoop Lite Canopy
Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)
- Pobrania
- 359
- Polubienia
- 51
- Ocena
- 4,67
P
PrintablesCarlos
Ultra light hdzero eco and pinch camera whoop canopy
Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…
- Pobrania
- 335
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPeaKay
HDZero Goggle Patch Antenna Mount (captive)
A HDZero goggle antenna mount for the TrueRC patch antennas. The mount is captive (no adhesive needed). Make sure to add a piece of foam between the backside of the antenna and the goggle front surface to prevent scratches from the solder…
- Pobrania
- 319
- Polubienia
- 26
- Ocena
- 5
P
PrintablesIsTim
Skyzone SteadyView X Cover for HDZero Goggles
This is a cover for the Skyzone Steadyview X receiver with screen and jog wheel that fits the HDZero goggles analog module bay. There are two versions, one with fan mount and one without. The Skyzone receiver comes with a fan but none of…
- Pobrania
- 300
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLukasz
HDZero Goggle SpeedyBee Analog VRX cover.
This is as close as possible to the original Speedybee VRX cover, the only difference being that is actually fits the HDZero Goggles :-) The pictures show slightly earlier version of the cover. I've moved the USB port 1mm to the side so…
- Pobrania
- 300
- Polubienia
- 21
- Ocena
- 5
P
PrintablesMr V
MFD Crossbow Mini AAT Mount for HDZero, Walksnail, SIYI HM30, Maple Wireless and Triple Feed Patch Antennas
Here is another tripod mount for the MFD Crossbow Mini AAT. This one you're able to use either the SIYI HM30 video link, HDZero VRX, or the Walksnail VRX. I made the HDZero and Walksnail VRXs slide in type mounts. The HM30 uses a ¼ 20…
- Pobrania
- 292
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJack Lenders
HDZero Goggle Module Cover Rapidfire
This is a completely new model for Rapidfire module cover for the HDzero analog module adapter. No breaking tabs an better fit on this one ;-) Hope it works better for you too.
- Pobrania
- 274
- Polubienia
- 9
- Ocena
- 5
P
PrintablesCarlos
Whoop canopy for hdzero and walksnail
I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…
- Pobrania
- 274
- Polubienia
- 26
- Ocena
- 5
P
PrintablesQuadamoose
HDZero Goggle Walksnail VRX Mount
The mount uses the stock screw holes on the back of the Walksnail VRX, but the screws will need to be replaced with longer ones. The stock screws are a different pitch, but I found that M2's hold in the plastic just fine. This mount is…
- Pobrania
- 251
- Polubienia
- 28
- Ocena
- 0
P
PrintablesCerberus
HDZero Analog Module Cover
Inspired by the cover designed by Adam_86. This is a ground up reworking of the RapidFire Cover for the HDZero Goggle Module 'Bay'. Included files - Blank Version, use this to roll your own variations of the cover. RapidFire - Vented…
- Pobrania
- 236
- Polubienia
- 13
- Ocena
- 5
P
Printablessanderpuh
Ultra light HDZero ECO cam mount
Light weight ECO cam mount at 45 degrees for your tinywhoop. Printed using PP - not tested with other materials. Update 2024-9-30: Users reported they successfully printed the model using TPU, weight increased with 0.1g compared to PP.…
- Pobrania
- 216
- Polubienia
- 18
- Ocena
- 0
P
PrintablesBombastisch
Skyzone SteadyView X Module Cover for HDZero Expansion Module
Module Cover for Skyzone SteadyView X. For proper contact you must extend the module pins a little bit. Use TPU! I think PLA, ABS or PETG wont fit. Material: TPU 95A Layer heigt: 0.2mm Infill: 90% Support: True
- Pobrania
- 216
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCarlos
HDZero Goggle Analog Covers
UPDATE: Added for rapidfire and eachine pro58. I didn't like the few covers I found for tbs fusion and none of them fit correctly either they didn't catch the notch correctly or broke off making the cover loose or fall off. So I created…
- Pobrania
- 210
- Polubienia
- 16
- Ocena
- 5
P
PrintablesCarlos
HDzero Lux camera long leg canopy
Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…
- Pobrania
- 209
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAG_86
analog steadyview cover hdzero goggle
A cover for the hdzero goggle analog module bay to fit the steadyview module from skyzone
- Pobrania
- 206
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTim Fredriksson
Hdzero sma fix
Yo, this is a fix for the problem with the sma connector problem on the hdzero goggles. I have done a couple spacers and bushing for securing it all good without any scratches. I would suggest printing out all the files x2 and then…
- Pobrania
- 200
- Polubienia
- 18
- Ocena
- 0
P
PrintablesChris Thijssen
Hdzero Tiny whoop canopy for Lux and Eco (45 and 40 degrees)
Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.
- Pobrania
- 187
- Polubienia
- 11
- Ocena
- 0
P
PrintablesWilliam Call
HDZero Micro V3 / Avatar HD Pro Lens Protector
This protector works for both the HDZero Micro V3 and Walksnail Avatar HD Pro
- Pobrania
- 170
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBacon2002
Five33 Switchback HDZero Nano 90 camera mount
Five33 Switchback Zero - HDZero Nano 90 camera mount Similar to the Five33 stock camera mount for Switchback Zero. Works with the HDZero nano 90 + upgraded M8 lens (1.8mm FOV D:150° H:125V:75°) To be printed in TPU The mount provides a…
- Pobrania
- 163
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBoilerBoy
Grinderino HDzero Antenna Mount
HDzero Freestyle VTx antenna mount for the Botgrinder Grinderino quad. Specifically designed to accommodate the antenna tube (length and diameter) of the antenna provided with the HDzero Freestyle VTx kit. Plus, it can add a splash of…
- Pobrania
- 161
- Polubienia
- 6
- Ocena
- 0
P
Printablesbillyd
HDZero Goggle faceplates with mounting for custom prescription lenses
Update 01-18-23 Wide faceplate added! Update 01-17-23 I rebuilt the model from the ground up and improved it further. Added the step file for those who wish to make changes. Coming soon: Wide Faceplate version! Update 01-16-23 I replaced…
- Pobrania
- 160
- Polubienia
- 14
- Ocena
- 0
P
PrintablesFourflies
HDZero Lux camera 14mm adapter
This adapter allows one to use an HDZero Lux camera in a common 14 mm wide FPV camera mount, eg. compatible with a Happymodel Crux3 canopy, plus many others. The photographed samples were printed by JLCPCB in PA12 on their MJF printers.…
- Pobrania
- 152
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDanO83
HDZero VRX Triple Feed Patch Array antenna mount
This mount is designed for the HDZero VRX. use M3x6 screws to attach the antenna to the mount. There is a left and a right version. The mount is at an angle so that the antenna points forwards.
- Pobrania
- 147
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSebby_D_FPV
HDZero ECO Whoop Canopy
Adapted Nerdcopter's design for HDZero ECO cam Category: Other
- Pobrania
- 146
- Polubienia
- 7
- Ocena
- 4
P
PrintablesIsTim
HDZero Walksnail VRX rail mount - slidable
This is a slidable version of the Walksnail VRX mount which I use to mount the VRX with velcro. I didn't like having to bend the clips on and off and this just seemed easier.
- Pobrania
- 144
- Polubienia
- 6
- Ocena
- 0
P
Printablesnotlion
Flywoo Firefly 1S Nano Baby Pod for HDZero Nano V3
I updated my quad with the new HDZero Nano V3 camera. This camera has the same 14mm mounting as the original Nano Lite camera, but the lens is a little bigger. I made this pod to accommodate the larger lens. There is a small bit of…
- Pobrania
- 140
- Polubienia
- 13
- Ocena
- 0
P
PrintablesKPV
HDZero Micro V2 Camera Mount for Five33 Switchback Pro
WARNING - as there are no metal standoffs and the camera sits very close to the main stack this design ofers very little protection in the case of a crash - use at your own risk . It's probably best to mount the VTX at the top of the…
- Pobrania
- 132
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBacon2002
Toothpick canopy (HDZero - ELRS PP / EP2)
Toothpick / micro canopy, this is a light, strong and versatile canopy - 25.5 x 25.5 mounting points. The canopy houses components: HDZero nano HD camera New Sport version - (Canopy2021sport.3mf) lower profile canopy, improved mount for…
- Pobrania
- 121
- Polubienia
- 11
- Ocena
- 0
P
Printables3DiXY
HDZero Box Pro Protective case
Case to protect your HDZero Box Pro. As an addition you can also store a VRX inside this box. The VRX space is designed for the RunCam WiFiLink VRX (please try OpenIPC or RubyFPV!) But a Walksnail VRX will probably also fit. The Inlay and…
- Pobrania
- 116
- Polubienia
- 14
- Ocena
- 5
P
PrintablesBacon2002
TinyTank drone racing quadcopter - 4S 3" Micro cam & HDZero versions
"TinyTank" This is a prototype monocoque 4S 3 inch racing / freestyle quadcopter design with all the components (FC, VTX, wires, battery etc.) fitted internally. Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4) The FC and VTX are…
- Pobrania
- 116
- Polubienia
- 21
- Ocena
- 0
P
PrintablesMatiasV
Skyzone SKY04X - HDZero + antenna adapter
A quick remix of https://www.thingiverse.com/thing:4830132 I needed to fix my 7 turn helicals antennas a little up to balance better the google in my face.
- Pobrania
- 114
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDrewLittleFPV
HDZero Goggle / Goggle 2 Hard Case
This is a remix of MDHR's goggle case design, I wanted to make the overall size of the case more compact, add space for TrueRC patch antennas in front of the goggle, and add some lens protection to prevent the strap from touching them. I…
- Pobrania
- 112
- Polubienia
- 22
- Ocena
- 5
P
PrintablesMadKwad
HDZero antenna mount
This mount is designed to hold and protect the HDZero freestyle VTX antenna. It is available in 2 versions : 1 for Heks Joocy frame 1 for BLS Forza frame The standoffs should be M3 size with a diameter of 5mm. The antenna is inclined at a…
- Pobrania
- 112
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKieran
FPV Wing Racer 20x20 vtx mounting - hdzero eco
The base can mount a hdzero eco VTX , I have also increased the strength of the base and widened the screw holes between the base and wing to allow m2 bolts and nuts to fit. Use the original model to print the other parts and follow the…
- Pobrania
- 108
- Polubienia
- 26
- Ocena
- 0
P
PrintablesBoilerBoy
HDzero SteadyViewX Module Cover (remix)
This is a remix of the design by IsTim of a cover for the Skyzone SteadyViewX analog VTx module for use in the HDzero goggles. I included both .STL and .STEP files of the design based on IsTim's design. The purpose of this remix is to…
- Pobrania
- 107
- Polubienia
- 6
- Ocena
- 0
P
PrintablesArcheantus
Walksnail Goggles X HDZero and Steadyview X LED Cover
I was successful printing with a layer height of 0.16 mm with supports. Again the tabs may need to be thinned with a razor blade to ensure a snug and proper fit of the LED cover to the goggles. Remove the LED from the existing LED cover…
- Pobrania
- 102
- Polubienia
- 9
- Ocena
- 0
P
PrintablesWizz ᕽ≡
Wizz #8 Camera Mount - HDZero Nano90 / Foxeer Predator Nano5
Fit for Wizz #8 Racing Frame https://wizz.store/products/wizz-8-racing-frame • Foxeer Predator Nano 5 • HDZero Nano 90
- Pobrania
- 99
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChris Thijssen
hdzero eco and lux cam mount whoop
hdzero cam mounts for the eco and the lux
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
Printablesikilledmypc
Skyzone SteadyView X Cover for HDZero extension bay V2
I several small modifications to make it more sturdy less prone to breaking the clips and some changes for V2
- Pobrania
- 94
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMr.RodgersFPV
Typhon / Dindrone HDZero nano 90 mounts
Typhon / Dindrone HDZero nano 90 mounts
- Pobrania
- 94
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSwissFreek
HDZero Walksnail VRX Mount 20º Up-Tilt
Like the title says, I tweaked IsTim's Walksnail VRX mount for HDZero goggles to have 20º of up-tilt built in for those of us that tend to look down as we fly. Only includes one side. Mirror the part in your slicer to make the other side.
- Pobrania
- 91
- Polubienia
- 11
- Ocena
- 0
P
PrintablesAvi Physics
HDZero Goggle SMA spacer and bushing set
Watch this youtube video to understand how to properly fit and install these. https://youtu.be/dv0Cf3Jk1y4 These are based on this design from Tim https://www.printables.com/model/381810-hdzero-sma-fix
- Pobrania
- 88
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCarlos
HDzero Eco camera long leg canopy
Raises the eco cam canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. The canopy comes…
- Pobrania
- 85
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPaul
Impulse RC Apex 5'' HDZero Freestyle VTX v1 Antenna Mount
Simple mount for the Impulse RC Apex 5'' Frame when using a HDZero Freestyle VTX v1 and an 85mm antenna.
- Pobrania
- 81
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFourflies
HDZero TrueRC X-Air brackets and thumbscrews by Fourflies
These brackets feature some enhancements over other designs: X-Airs are held in place by clips. No adhesive or tape. Feet added to the bottom of the brackets supports the goggles and prevents the focus adjust wheels from touching. Curved…
- Pobrania
- 77
- Polubienia
- 12
- Ocena
- 5
P
PrintablesGln_Sevi
Five33 Switchback Pro/Classic/Light HDZero Top Plate
This is a top Plate for the Switchback Pro combined with HDZero
- Pobrania
- 77
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKyle Geisler
Heewing Ranger T1 HDZero Freestyle VTX Rear Hatch
Slight tweak to the great work by aviphysics. After my first rough landing with the original, I wanted retaining screws for the rear hatch. Just sink some nylon standoff into the foam with hot glue and you have a very sturdy,…
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 0
P
Printablesburykot
Toothpick canopy - HDZero Nano + Foxeer Lollipop V3
Canopy designed to fit onto toothpick styled frames. It is designed to house the HDZero Nano (14x16mm) with a Foxeer Lollipop v3 antenna. Will also fit other, standard (14x14mm) cameras like the Runcam Nano HD and older analog nanos. The…
- Pobrania
- 72
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGoz72
FPV Cycle Glide - HDZero Race VTX 30mm Stack Mount
Came up with this design to fit the HDZero Race VTX into a 30mm stack mount on the FPV Cycle Glide frame. Offset it so that it will sit inside the standoffs, just enough clearance to get squeeze it in and clear everything. I run mine on…
- Pobrania
- 72
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPureDeath
TBS Fusion Screw Shut Enclosure for HDZERO Goggles
My analog modules like to pop apart in my bag, so I designed a enclosure that is screwed closed with M3 hardware. The bottom antenna hole is enlarged to support a stubby omni. Files are orientated correctly you will need supports from bed…
- Pobrania
- 70
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPéPé Stéf
HDZERO-2P NEWS
La HD-ZERO-2P La frame HD en 2 pouces pour un coût total de moins de 10€ c’est possible Il te faut: Du filament TPU70D pour imprimer la base FC/Moteurs ( axes 9 ou 12) Du Nanovia TPU70D pour imprimer le reste des pièces. J'ai modifié la…
- Pobrania
- 70
- Polubienia
- 14
- Ocena
- 0
P
PrintablesWilliam Call
RunCam HDZero Nano 90 Camera Protector
TPU protector for the RunCam HDZero Nano 90
- Pobrania
- 69
- Polubienia
- 3
- Ocena
- 5
P
PrintablesPureDeath
HDzero Goggle Stand
A stand to help support the bottom half of the shell without putting strain on the display ribbon cables. Print detail isnt to important on this model, I would do large layer heights and low infill, a modifier can be used fo the upper…
- Pobrania
- 67
- Polubienia
- 13
- Ocena
- 0
P
PrintablesJack Lenders
HDZero Goggle Nose Shim
However good the basic fit of the HDZero Goggle is. It's quite front heavy. For me this meant it kept sliding down. Making it very difficult to keep the image vertically centered and having to readjust constantly. This shim makes the…
- Pobrania
- 67
- Polubienia
- 17
- Ocena
- 0
P
Printablesdkrider
Shapeoko 3 HDZ Vacuum Hose Mount
This is a cradle for a 2 1/2" dust hose which allows it to be mounted above the router/spindle on a Beaver HDZ z-axis. Fusion 360 design can be downloaded from here; https://a360.co/2zgJ9Ax Category: Tools
- Pobrania
- 66
- Polubienia
- 12
- Ocena
- 0
P
PrintablesChris Thijssen
Hdzero Lux Race canopy
After destroying 2 lenses in 1 night i decided to make a canopy that better protects the lens. The sides need to be trimmed a little bit so they are not visible while flying. Update , added 30 degree version and 2 extra protection igow…
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOptikool
HDZero VRX Rail Mount 40deg
This is an HDZero VRX Rail Mount for the TrueRC X2-AIR MK II 5.8GHz Patch Antenna Pair. This adds a 40deg angle to the original rail mount. There are two versions for the left and right sides of the HDZero VRX Goggles. Update 11/16/22 -…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 0
P
Printablesdaevee
HDZero Lux Camera Canopy
Print this flat in TPU with no supports. Weighed approximately 0.6 grams.
- Pobrania
- 63
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSpecnor
45 and 50 degree for Predator Nano and HDZero Nano 90FPS
45 and 50 degree for Predator Nano and HDZero Nano 90FPS
- Pobrania
- 63
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMari
SMA plugs for HDZero Goggles
Designed to fit Micro AXII 2 stubby antennas. The Plugs are modelled to the official goggles 3d model. Printing the correct pieces for each side may be necessary, i have faced some weird alignment issues with them. Mine are printed in…
- Pobrania
- 62
- Polubienia
- 10
- Ocena
- 0
P
PrintablesXtasy
HDZero Freestyle V2 VTX Antenna Mount for 5inch Mark5 Frame
2 Models which fit on the Mark5 5inch frame. It can actually be used with any other small antenna but this one works nicely with the HDZero Freestyle V2 VTX
- Pobrania
- 62
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRodrigo Sclosa
Walksnail Goggles X Mount Rail for TrueRC X²-AIR 5.8 MK II PAIR FOR HDZERO
This is a front rail system to mount the TrueRC X²-AIR 5.8 MK II PAIR FOR HDZERO VRX4 on Walksnail Goggles X. Mirror it on your slice software to get the other side. Here is the Antennas:…
- Pobrania
- 62
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChris Thijssen
Hdzero Joker racing canopy Lux and Eco
I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…
- Pobrania
- 59
- Polubienia
- 11
- Ocena
- 0
P
PrintablesIsaac Alich
HDZero Freestyle 1W Butterfly Camera Micro V2 Mount / Pod
Nice little camera holder for the HDZero Freestyle VTX to hold camera and included antenna. Prints out of PLA+/Tough PLA, PETG, ABS or TPU. I would not print out of standard PLA just because it may be too brittle for the screws to thread…
- Pobrania
- 59
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTokyo_Dom
Goggles X HDZero VRX mount
Simple mount for the hdzero vrx. Use adhesive Velcro to attach to the top plate of the goggles
- Pobrania
- 57
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPaul
Impulse RC Apex 5'' HDZero Micro V2 Cam Mount 25deg
Beefy mount to hold and protect the HDZero Micro V2 Cam in the Impulse RC Apex 5'' Frame at 25deg.
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
PrintablesWill
HDZero Goggles Walksnail Ascent VRX Mount
This is a mount I designed to attach the walksnail ascent VRX to the front rails of my HDZero goggles. It's tested on the V1 of the HDZero Goggles, but should work on the V2 also. The STL contains only one part, you need to mirror it in…
- Pobrania
- 55
- Polubienia
- 9
- Ocena
- 5
P
PrintablesCarlos
HDZero Lux and Walksnail Avatar HD lite Camera Canopy 4 mounting points
A 30° fixed-angle canopy for the HDZero Lux and Walksnail Avatar HD lite cameras with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective…
- Pobrania
- 52
- Polubienia
- 8
- Ocena
- 5
P
PrintablesChris Thijssen
HDzero Nano v3 Cam holder Fractal 75 pro
Could not find a good cam holder for the HDzero nano V3 cam on a fractal frame. The original did not fit nicely because the cam is 16 mm high and i did not like the way the mipi cable sat on front of the carbon. So i made something new…
- Pobrania
- 52
- Polubienia
- 12
- Ocena
- 5
P
PrintablesKPV
HDZero Goggle Rail Cold Shoe Mount
Addition for the HDZero Goggles, to add a cold shoe mount via the front rails. Enables you to use cold shoe compatible microphones such as the Rode VideoMicro. There are two files, as the cold shoe mount is rotated 7.5 degrees relative to…
- Pobrania
- 51
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKommander92
Typhon v7 HDZero camera mounts
These are fixed-angle mounts for the most common HDZero cameras (Micro V2 and Nano 90) on the SouthEastFPV Typhon v7 frame . They're angled at 50° for my personal racing preference. Design The fit on the lens is pretty tight but should it…
- Pobrania
- 51
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGalinette
Camera mount / HDZero Nano 90 / KayouMini / 25 degrees
This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFeistyLemur
Demibot HDZero complete build
This is the complete dump of stuff for a full HDZero Demibot build. It's all pretty straightforward. All parts are made to be TPU except the skids, which are meant for a solid plastic. I used polylite PLA because it's really stiff and…
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 0
P
PrintablesChili_nor
Caesar 3 inch HDZero Nano90 with upgraded lens canopy
Canopy that fits the upgraded lens for the nano 90 camera
- Pobrania
- 49
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJohn Godwin
OpenIPC Radxa Zero 3W HDZero Goggle case rail mount
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles
- Pobrania
- 47
- Polubienia
- 14
- Ocena
- 0
P
Printablestkramm
HDZero Goggle Expansion Module Back Cap
Since the protective Kapton tape started to peel after a few times attaching and detaching the module I designed this part to close the back side. I printed it in TPU and pressed it in. You might also want to check out my other models for…
- Pobrania
- 46
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDanulal
Kayoumini HDZero AIO15 TPU battery straps + cable routing
This fits a kayoumini build using the XT30 cable that comes with the AIO15 and I have tested it with the flywoo explorer 420mAh HV 2S LiPo Inspired by models such as: and
- Pobrania
- 45
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBacon2002
TKS 2s canopy (HDZero + ELRS PP / EP2 + battery mount)
Toothpick style canopy deigned to accept: HDZero - Nano camera RX - ELRS PP / EP2 receivers (the RX fits behind the camera on a tray - glue in place) VTX antenna - friction fit or glue This version of the canopy is intended for use with…
- Pobrania
- 44
- Polubienia
- 9
- Ocena
- 0
P
PrintablesevilC
HDZero (RunCam) Nano Lite lens focusing tool
This tool is designed to allow you to easily focus the lens on the camera without having to remove it from the camera mount. It also does not obscure your FPV view while it is attached, so you can pop it on and use one of the arms to…
- Pobrania
- 44
- Polubienia
- 6
- Ocena
- 0
P
Printablesah9illator
HDZero BoxPro Walksnail Ascent VRX Adapter
This is a Caddx Walksnail Ascent Pro VRX mount for the HDzero BoxPro + FPV Goggles New version accommodates top mount as well as front mount, and folds flat for storage/transport. Use the top mount to reduce neck strain but you will need…
- Pobrania
- 42
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSmika
HDZero Lux KayouMini Canopy
This was made for using the lux camera with the aio15 in the kayoumini.
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
Printablestkramm
HDZero Goggle Expansion Module Pin Header Cap
You might also want to check out my other models for the HDZero Goggles: https://www.printables.com/model/1009854-hdzero-goggle-expansion-module-back-cap https://www.printables.com/model/1013045-hdzero-goggle-expansion-module-clip-hole-cap
- Pobrania
- 40
- Polubienia
- 9
- Ocena
- 5
P
PrintablestheFPVgeek
HDZero Lite / Runcam Nano 3 Whoop Camera Mount w/Hood (Adjustable Angle)
Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
Printableshockeyrounds
Volador VD5 hdzero antenna mount
work in progress, designed to mount to freestyle v2 stock antenna on the volador 5in frame 5mm hex standoffs
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
Printableskevinsumner
HDZero Goggles Eyepiece Cover
This is intended to cover a single eyepiece on the HDZero goggles. Print two for dust covers or print one to help with eye alignment issues, such as esophoria. Find the source files for this and my other designs in this repository:…
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 3
P
Printablesbob9
Bezerk IQ0 Neuron HDZero 90 Camera Mount 47.5-55 Degree Prints
Bezerk IQ0 Neuron Frame Camera Mount 47.5 Degrees 23mm and a 25mm Stand off height The camera mount was created and modified using.
- Pobrania
- 36
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVarigon
FPV Baby APEX 2.5 SoloGood HDZero
Nice little ripper for around the house. Baby APEX 2.5 HDZero AIO15 HDZero LUX Cam T-Motor 1103 8000KV Gemfan 2512 2.5 x 1.2 x 3 Print the camera ring in a solid material, the dampers in TPU or VarioShore. I removed a little bit of the…
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEugene Shusterman
HDZero Goggle + SkyZoneSteadyviewX cover (Extended for stackable pins)
HDZero Goggle + SkyZoneSteadyviewX cover (Extended for stackable pins)
- Pobrania
- 36
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRoach
Heewing Ranger T1 HDZero Micro V2 Front mount
I printed mine at .1mm and put the cover on its back. I used 3mm heat sets for holding the cover on with some 3x4mm cap srews. Thanks and suggestions are welcome!
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMrKaul
HDZero Googgle TrueRC X2 AIR 5.8 MK II Adapter
Description (English): This adapter is designed to securely and precisely mount the TrueRC X² Air 5.8 MK II antenna onto HDZero Goggles. It ensures a stable fit, optimal alignment, and prevents the antenna from rotating unintentionally.…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJack Lenders
HDZero Freestyle 20-30mm adapter
HDZero Freestyle 20-30mm adapter that will fit almost any 20mm mounting pattern. I print this in ABS for strength, but PETG might work well too. Use 5 walls and 40% infill. This adapter will not work when printed in TPU.
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGunther Votteler
Kronos mount -HDzero Micro V2
Cam mount for Kronos frame - cam Hdzero micro V2
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJack Lenders
Hdzero Freestyle V1 model
Model of a HDZero Freestyle V1 VTX. To test fit this VTX to your frame or model an adapter for it. Category: R/C Vehicles
- Pobrania
- 35
- Polubienia
- 0
- Ocena
- 0
P
Printableskevinsumner
HDZero Goggle Adapter for Fat Shark Straps
This small adapter is for using a strap designed for Fat Shark goggles with the HDZero Goggles. To use: Print two. Use PETG or another sunlight-resistant, rigid material. Push the loop of the strap through the metal mount of the goggles…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBURDFAMFPV
HDzero Box Goggle Fan adapter for vrx's
for hdzero box goggles to hold a vrx
- Pobrania
- 33
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSeekerFPV
Five33 FlipSwitch Freestyle-HDZERO Freestyle V2-TrueRC singularity 72mm Antenna-Mount
Just add a tiny zip tie at the top of the print to create pressure on the antenna so that it doesn't move.
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPhix
KAHA HDZero Nano90 V1/V2 Mounts
The Kaha is a frame I designed, designed to be a super strong durable drone racing frame which is cost-effective, runs 30mm electronics if you like and protects those electronics. Kaha translates to strength in Te Reo which is the…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0