15,256 models
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for PETGSource material: PET
Author: pmoews
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Nativity Sheep Set
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Since i got powder coated sheets, i had to put multiple sheets somewhere So i made this sheet holder! Nothing special just a simple shape but at the bottom, there are hexagonal holes to let the air go through tho I removed my logo areas…
Print approx. €14.95–€18.27 excl. taxPreliminary estimate for PETGSource material: PET
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
I love this model, however it didn't fit my toilet rolls with 37mm inner diameter so I added a version where the cylinders have been replaced. The new cylinders are backward compatible with the parts from the original model. The original…
Print approx. €3.22–€3.93 excl. taxPreliminary estimate for one variant
This is actually my wife's idea and I made it for her. She needed toilet paper holder. Looks fantastic fully loaded by white rolls. Happy printing! Print instructions This design fit on typical MK3 heat bed 25x21cm. Body is made with two…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for PETGSource material: PET
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
Print approx. €22.67–€27.71 excl. taxPreliminary estimate for one variant
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
Print approx. €40.45–€49.44 excl. taxPreliminary estimate for PETGSource material: PET
Sheep
Print approx. €10.51–€12.85 excl. taxPreliminary estimate for one variant
Prusa Mini Steel Sheet Holder for 3 steel sheets based on iFreyz's Model you can also add Extended Stability Feet to join 2 holders
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
Keep your Prusa i3 steel sheets organized and dust-free with this sturdy, under-table storage solution. Designed for all recent Prusa i3 models with a standard bed size, this holder will not fit the Prusa Mini due to its smaller bed…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…
Print approx. €10.27–€12.55 excl. taxPreliminary estimate for one variant
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Cute Sheep Toilet Holder Remix Print Instructions Default Prusa Slicer 0.10mm ~ 0.20mm Quality Print settings Filament : Black PLA, PETG Perimeters : 2~3 Support : None Brim : None Change Log 2024-02-26 (V2) Sheep Toilet Paper Holder…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
shaun the sheep toilet paper roll stand this is a complete new head design, print in 2 parts für quick and easy printing without support, legs print in vase mode the eyes print with color change at layer height 4,4mm glue the head parts…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Prusa CORE One Print Sheet holder Simple magnetic print sheet holder for your Prusa CORE One. This model uses 6x3mm magnets commonly found in Voron projects. This model fits 3 Prusa print sheets. Check out the remixes for different magnet…
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Wanted to create a way to make wheel sets for HO railway cars. Two parts wheels and axle, easiest to print separately. I recommend doing 4 axles at the same time, works best with my Prusa. To get them glued in all the right angles, print…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A Chair Wheel stopper originally designed for the Secretlabs Titan. The Wheel have an diameter of ~61 mm and a with of 55 mm. The stopper has 2 embedded holes for 10x2 mm magnets for organisation and 4 holes for 10mm silicon feet to…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Shaun the Sheep from Wallace and Gromit
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
Funny pencilholder for your desk! Be different from your boring colleagues :D
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for one variant
This is a remix of the print sheet holder designed by Waldmops. This a stand alone version. I printed in PETG but it should work with PLA Infill: 15% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €6.20–€7.58 excl. taxPreliminary estimate for PETGSource material: PET
Hi i designed a Wheel for my Worx Landroid (Worx Landroid M-500) because we have a uneven garden so Ive designed a wheel to fix issues when my wheel gets stuck, and it not get over our stones try it yourself and Test it! I Hope it can fix…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
Cheech and Chong Love Machine : Crash Derby Cars Designed for use with the Crash Derby Cars Game Extra solo car included (remove from plate if not needed to save time) Print at .1 lh if you slice it yourself. Update (12/13/2025) : it…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Passionate about aeronautics, it was for meunthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model with the double slide and lock…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Very simple box requires no supports. I printed it at 0.3mm as it doesn't have any fine detail so it prints fast. I have included the Fusion 360 file and a sketchup file in case you want to modify it.
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
More information on this weave can be found here https://www.mailleartisans.org/weaves/weavedisplay.php?key=11 it has a very strong directional element that makes it look like scales. this is just a small section but larger parts will be…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
Print approx. €9.17–€11.21 excl. taxPreliminary estimate for PETGSource material: PET
The wheel can make one of the joysticks not move all of the way, so if your game supports it you might want to change the controls. You will need a 608 bearing for the wheel. If you are going to print one I recommend the one by zimo .…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Remix of randofo's Toilet Paper Sheep. https://www.printables.com/model/468552-toilet-paper-sheep I remade the body to print with no supports when printed in the orientation shown above. I remade the face to have the neck attached (one…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Intro After i first saw this model i knew i had to have it in my bathroom! Looks so awesome and its a nice eye catcher, because you look right at it when you enter the bathroom. Regarding the design i was not 100% happy and limited by my…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
This is a remix from this wooly sheep from thingi: https://www.thingiverse.com/thing:95721 You have to support the ears since they are hanging on the tip. Due to the very small amount of filament on the first layer, print this layer VERY…
Print approx. €11.09–€13.55 excl. taxPreliminary estimate for one variant
Car lift for hot wheels. Printable with no supports. I used PLA and it turned out fantastic. Rigid and easy to assemble. This is my first model so any and all suggestions, questions, comments are welcome.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for PETGSource material: PET
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a cute Sheep keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Print approx. €4.68–€5.71 excl. taxPreliminary estimate for one variant
For greater authenticity of the Bugatti EB110 model, I created rims in the same design as the original. Bugatti EB110 (42083 model B) The original rims are too wide. My model is without a collar to make the tire fit better. Version (2) is…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
Silent hamster wheel 190mm diameter with mounts (screwed directly to the cage). Update 10.06.2022 added hamster wheel with 215mm diameter and modified version wheel nut (models names wheel 215 and wheel nut 215 ) modified models for…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Chester the Cheetah Mascot for Cheetos
Print approx. €12.07–€14.75 excl. taxPreliminary estimate for one variant
Hey there, check out this Scout woggle inspired by Bagheera. It could also resemble a leopard or a puma. Bagheera, the awesome black panther and Mowgli's friend, is one of the main characters from Rudyard Kipling's "The Jungle Book" that…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
I wanted to do something to increase a safety on roads... So I upgraded and remodeled a Loose Wheel Nut Indicator to everyone, who have a truck, delivery truck, trailer or big pickup. I remodeled a great model by FullSendFab from…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Cheep Cheep the Puffer Fish from Super Mario Brothers.
Print approx. €10.31–€12.60 excl. taxPreliminary estimate for one variant
I am huge fan of Formula 1 and cars, so I decided to add my model "Formula Tyrell P34 1976 Kid Toy (stronger with function wheels, 1:24)" to the ongoing Toy Cars Prusa Contest. I took and remodeled two original models by rkxone and…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A replacement scroll wheel for the Corsair Scimitar pro. If scrolling does not work on your corsair scimitar pro and the wheel moves without resistance, this might be due to a broken pin on your scroll wheel. This replacement part can…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Remixed from Thingiverse User iron2dog if you like my model please leave a like there
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
The steel plate holder is available in several variants. 1. Sheet metal holder with slots for 4 SD Cards with mounting holes on the wall or inside the IKEA cabinet or table. 2. Sheet metal holder WITHOUT card slot with mounting holes on…
Print approx. €8.71–€10.64 excl. taxPreliminary estimate for PETGSource material: PET
Again simple attempt for parts for dioramas
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Just a simple old style water wheel, created as a replacement for my parents garden pond. The old one attached to their decorative display was made from wood and started to pull water and swell, so it was replace with this one printed in…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
Inspired by 10 Easter Egg Bunny Crochet Patterns Free & Paid - DIY Magazine (fabartdiy.org) Use supports 3MF contains multiple parts, you can edit Slicer separately STL is one part 🆕 added variants with a plate on the bottom side (base) 🔧…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
You will need 4 pieces of 608zz- /8x22x7mm/ bearing from the inline skates and 8 pieces of M3x 12mm screws for attaching the cabins. If the bearings on the axles are loose, you can glue them or press them with caps. Some parts have a…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Two sizes of mecanum wheel for BitBeam construction kit. left and right cover are same, but be sure both of them have same direction (see arrow) i add wheels between covers, bb-wh-3 for bb-mecanum-7 and bb-wh-5 for mecanum-9 for each size…
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
Wheel center cover adapter for a Golf 7. If you have any problems or suggestions for improvement then please let me know :) I would be very happy about any feedback :)
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
After my old wheels are broken i wanted to buy spare wheels but they only sell them including the basket for 75.90EUR!! So i designed my own. Everything can be printed in one piece. The necessary supports are already included in the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Take this little gauge between your middle finger and your thumb. Now you can rotate it with your index finger. This way it is a matter of seconds to determine the outer radius of any kind of edge. All credit for the creative part of this…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Inspiration I didn't have enough 6x3 magnets for @matthew__172848's Magnetic Print Sheet Holder , so I remixed it with different sizes and fewer holes. Please see the description of the original model for more detail. Enjoy! By default, 8…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
Holds up to 5 sheets Name of each sheet readable → easy selection Sheets safely embedded in the holder with stops → no sliding out Small footprint in desk space and in filament usage L x B x H = 265 x 90 x 276 mm Printed with HF nozzle…
Print approx. €5.38–€6.57 excl. taxPreliminary estimate for one variant
Čepičky pro označení umístění kol na autě. Verze se závitem,pro výměnu za stávající čepičky a verze bez závitu pro nasazení na nejběžnější plastový typ čepiček, průměr 9,8mm. Valve caps for distinction Wheels placing (position) on car.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for PETGSource material: PET
I modified Haymount 's IKEA SKADIS MK3/s Steel Sheet holder , to fit two Mini(+) Steel Sheets to be mounted on the Ikea Skadis pegboard. I have included the .step file if you need to modify something. Print instructions You will need some…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for one variant
This is a little windmill that adds a little color sport into your e.g. garden. It's mainly a 200mm x 200mm x 0.4mm flat sheet of plastic with some mounts for the bent wings and a 10mm stick. If you like this thing, you might want to…
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for PETGSource material: PET
Ik heb de bootschroeven wat kleiner gemaakt, 60mm doormeter en 30mm hoog. Voor een as van 2mm, er zitten ook 2 gaatjes in om de as mechanisch vast te zetten. I made the boat propellers a bit smaller, 60mm in diameter and 30mm high. For a…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
If you've got a set of wheels that have somehow lost their centerpiece or the plastic tabs have broken off, then this Porsche Wheel Center Cap is a perfect replacement; Print as is or customize it with your own logo/text. It has a 77mm…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Little Josef Prusa Character riding a SHEEP, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of 5-parts - prepared for 5-color print. Printed with MK3 & MMU 2.0 Read more about MMU 2.0…
Print approx. €25.19–€30.79 excl. taxPreliminary estimate for one variant
Lockheed Martin F-35B Lightning II Fighter Jet Wall Art Silhouette model. Adjustable size. I accept model suggestions. If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
What is Print in Place PLUS ? It's adding filament change stops to insert parts . Filament changes are set to 13.4, 29.6, 53.0, & 69.4 (for .30mm layers 69.5 ) Do not change color, instead just add tires and restart with same color. Tires…
Print approx. €3.89–€4.76 excl. taxPreliminary estimate for one variant
Prusa Steel Sheet Holder for 2 steel sheets Software PrusaSlicer Filament: PLA or PETG File: .STL or .gcode Supports: Everywhere Infill: 20% Or Recommend: File .3mf (3D Manufacturing Format) Thank You ;-)
Print approx. €7.51–€9.17 excl. taxPreliminary estimate for PETGSource material: PET
A set of pieces to build a water wheel featuring wood texture and pass-through connections for detail. This is a great piece because it's easy to paint and detail (can throw some basic wood colors, drybrush, throw on a dark wash) and can…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
1/64 Diecast Car Display Stand: Compatible with Hot Wheels, Matchbox, and More! Fast and Easy Printing.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
This is a remix of the “Christian Louboutin So Kate 120 High Heel Pump woman shoe” make STL from https://www.thingiverse.com/make:523890 by VDrostock , and the “Chef's Knife” STL. I decided to limit myself to STL editing in PrusaSlicer…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Držák je určen k uchycení brusných, řezných a brusných kotoučů o průměru 125 mm. Je možné potisknout střední trn nebo lze použít i bez trnu, například s těsněním. Držák lze umístit do skříňky na nářadí nebo do zásuvky. Dá se i…
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for one variant
Hot Wheels in scale 1:64 car lift. If your child likes Hot Wheels cars, you have to print this for him. :) I remixed this model from here: https://www.printables.com/cs/model/414288-hot-wheels-diecast-164-scale-4-post-car-lift I won't…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
Print approx. €2.65–€3.23 excl. taxPreliminary estimate for PETGSource material: PET
Novelty Door Cheese Wedge at 3" by 1.2" (76.2mm by 30.48mm) Prints best with organic supports, pre-sliced for your convenience. A simple design that'll always catch an eye, perfect for that Packers fan or Wisconsinite. WARNING : Please do…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
The original rubber rings on my Logitech MX Master started to deteriorate and while replacing the thumb button with a 3D-printed replacement , I decided to replace the dirty rings as well. Added a knurling pattern to the ring for grip and…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
This is the result of the “3D Modeling in Fusion 360” course from Prusa Academy. I had previously written the wheel in openscad, which you can find here: OpenScad Wheel The uploaded files are made for my Wolf A4600 Lawnmower. This one is…
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for PETGSource material: PET
Lockheed Martin F-22 Raptor Wall Art Silhouette Model. Ajustable size. I accept model suggestions.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
I printed it flat but he pins broke off easily so I printed in on the side and worked perfectly
Print approx. €18.69–€22.84 excl. taxPreliminary estimate for PETGSource material: PET
This is a blind box inspired by the video game Hot Wheels Unleashed. My child loves opening Hot Wheels but buying cars can get expensive quickly. I thought it would be fun to design and print something that I could put cars in and give…
Print approx. €7.72–€9.44 excl. taxPreliminary estimate for one variant
🐑🌸 Mini Easter Sheep 2 – This tiny, fluffy sheep is an adorable addition to your Easter and spring decorations! ✅ Size: 30 mm tall – small, cute & detailed ✅ Perfect for Easter & Farm-Themed Displays ✅ Great as a Fun Collectible or Gift 🌼…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Small steering wheel Audi.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Easy to make a cute Sheep keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Update History: May 8, 2021: Increased the robustness of the design by changing the thickness of the sails from 1 to 2 layers. See section “How robust is the wind wheel against wind and weather?” in the appendix for more details.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
![Shaun - Toilet Paper Sheep [MINI compatible]](https://media.printables.com/media/prints/75487/images/816048_8d38020b-bc60-4ff9-836c-ef3f966fb48b/20210731_183532.jpg)
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
