Counting matching models…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Small tractor with freely rotating wheels and flexi excavator printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…
Print approx. €10.22–€12.50 excl. taxPreliminary estimate for one variant
[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Stable stand inspired by MacBook Air M1 shapes, holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your MacBook if you want to save space on your desk. Printed with 4 perimeters (if you want to save…
Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant
Here you can find find a small jar with a threaded lid. You can print it directly without any support! At the end of the thread you can see a kink. This kink is to fix the lid when you close it, with a little force. Just try this print…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
SPoRK3 (also without label / clip) It's a spoon? It's a fork? In any case it's 3D printed! Due to its asymmetrical shape, it can be optimally printed lying on its side. Note: Only use food-safe plastics Clean and disinfect thoroughly…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
This is a remix of Ondřej Stříteský's "Standalone Drybox - with humidity sensor". This version only contains the bottom without the hole for the humidity sensor. Get the rest from Ondřej's original. You can place five pieces of this…
Print approx. €16.89–€20.64 excl. taxPreliminary estimate for one variant
Pentax K body cap with/without the old Asahi Optical Co logotype. No need to use support when printing. Regarding the pictures of the body cap, I have used sandpaper to make a more matte surface. NOTE: Harrow Technical UK writes “We do…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Le diamètre du haut du panier est de 225 mm donc vérifiez taille de votre plateau d'imprimante. Un fichier Gcode spécifique MK3/S/S+ et PETG permet d'imprimer la partie haute du panier (anneau tronqué pour tenir sur le plateau de la…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for PETGSource material: PET
Removed the name tag from the case and cut the model in upper and lower part to allow it to be printed in 2 colors.
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
This mount is designed to attach an ESP32-CAM microcontroller to an gas meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it is possible to read the…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Print without support. 0.30 mm draft. Optional: Brush surface with fine sandpaper and steel brush. Do you like it? Please consider to buy me a cup cup of coffee .
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
For everyone that want a cleaner look of the stand. If you like my work consider Buy me a coffee 😊
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This is a quick remix, done in PrusaSlicer of the cool model from @JAV3D . Original model with the compartments can be found here: https://www.printables.com/model/695171-print-in-place-scalable-prusa-box
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Decorative rooster in a flower bed. I used a bamboo stick from Chinese food to stick. Dekorativní kohout do květníku. Pro zapíchnutí jsem použil bambusovou tyčku z čínského jídla.
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
A remix of jerrydi's "Geocaching tube 50x30". The tray in the original model designed to hold the logbook was causing issues for me resulting in my log becoming stuck in the lid. Happy printing! 😀
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Here a list of all parts you need to complete the case: Raspberry Pi 4 Modell B; 4 GB, ARM-Cortex-A72 4 x, 1,50 GHz, 4 GB RAM, WLAN-ac, Bluetooth 5, LAN, 4 x USB, 2 x Micro-HDMI Raspberry Pi - power supply 1TB SSD SSD Case like on the…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
Náhradní ručka namísto originálních, které nic nevydrží, modelováno na zápustný šroub, ale může se dát i normální. Tisknte alespoň 5-6 perimetrů aby to drželo.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
I've pre-oriented the parts for their optimal orientation without supports. KUSBA mounts at the top where the threaded inserts are with 2 m3 screws. Uses the same bottom if you already have that printed Use the default The 100 print…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
With or without magnets. Use the magnetic version of the rupees to display artwork on your fridge. Use with my related Breakable Pots for Breakable Pots for Zelda Ocarina of Time 40th Anniversary model: Parts Each magnetic rupee uses two…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Description This is a robust and sleek desktop stand specifically designed for the Babyliss Pro 4artist shaver series. Whether you are a professional barber looking to organize your station or a home user wanting to keep your shaver safe…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
Hrošík magnetka (Hippo magnet) Velikost magnetu: 10 x 2mm Varianta s vložením magnetu (pauza) a s lepením magnetu (až po tisku) 4 barvy filamentu – světle šedá, růžová, bílá, černá Velikost vrstvy 0,2 – nastavení vložení magnetu a výměny…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
To print from STL make the oIn board game Stationfall there is only a token for a antimatter. This antimatter looks like that one on that token. Useful when you have 3D figures for this game. To print from STL make the object bigger 606%…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Simple patch stylized in the form of the flag of Poland. The patch is designed for colour printing in layers (ideally 0.2mm) using manual filament change (e.g. using the M600 command). The individual colours are printed in sequence: 0.0 -…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This is a remix of the phenomenal Spacemouse Handrest with Stream Deck Mount by BC-3D! I was given a SpaceNavigator that was removed from some industrial equipment and didn't have the stock metal base. I considered making a printed shell…
Print approx. €12.35–€15.09 excl. taxPreliminary estimate for one variant
Simple remix of the V2 version of the hackerboard cover @StevePaterson made. I also printed my version on a textured sheet, to give it a consistent look. Printed in black PETG.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Konečně dobrá kniha? Čtou jí oba? Nyní bez hádky kde kdo skončil.. (zkusil jsem něco jako mini podpory co by šly odříznout ale kupodivu ničemu nevadí je tam nechat) Finally a good book? Are they both reading it? Now without arguing where…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Vytvářel jsem prodloužení kohoutu k 1000l nádrží s 1" kohoutem kovovým s vnějším šroubením na konci. Protože se mi konev nevešla pod kohout, protože byl krátký. Divné tvarování je kůli převlečení mosazného osazení.
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
This is the same as @MalikDrako_2006414 files except the m3f file has been tweaked to print on a MK3S+. So if you are desperate to print on the MK3S+ use this otherwise use the original after upgrading to the MK3.5. I had a lot of…
Print approx. €5.28–€6.45 excl. taxPreliminary estimate for PETGSource material: PET
A simple patch stylized in the form of the flag of the Netherlands. The patch is designed for colour printing in layers (ideally 0.2mm) using a manual filament change (e.g. using the M600 command). The individual colours are printed in…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Archimedes found that π≈22/7… But could you explain that approximation intuitively? I provide a “ proof without words ” that is easy to print and easy to understand: The pieces form a 22×7 cm rectangle exactly, but could also form an…
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for one variant
Toevallig gezien in een winkel van een fruitschaal in een ronde vorm met blaadjes heeft mij geïnsereerd om deze potjes te maken. Ze zijn afgedrukt met PLA dat kan je makkelijk vervormen met heet water. Ik heb de print in een grote tas…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Printing instructions Layers: 0,2 mm Infill: 15% Material: PLA Support: No
Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant
Hello! Wanted some light in my Ikea Platsa furniture and the ikea solution was to expensive for me. I bought to Action a Baltimore LED Tube set for less than 5€ and wanted a solution without screw in case of LED tube failure.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
This radius gauge allows you to determine the corner radius of parts using a standard caliper . Tested with a Mahr MarCal and a generic low-cost caliper – compatible with most calipers. To calculate the corner radius, multiply the caliper…
1, 3 are covers for boxes 2, 4 are boxes Easy dimensions change. Jars with coil:
Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:
A hanger combined with a small tray. Two-part design that pressed fit together. No support Needed Print parts one at the time to improve quality. Changes Log: Jan02- Slimmer boat, sail, hook; Print optimization. Jan03- Added a bit more…
Caulking Gun Nozzle Unblocker - without support
Recently I became interested in F1, so I decided to design some tracks with their elevation. They will be available in 4 formats: either with their original elevation scale, 3x and 5x superelevated, or with no elevation. All circuits are…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … If you want to use your A1 (mini) without AMS lite the cable…
Remix of Figurine baby yoda (No base, No parts)
The best way to print the owl is the log in wood filament and the owl in white. In this way, you get Hedwig the owl from HP You will find the owl in 2 versions. The owl directly on the log The owl and the log separately, in that way you…
[ENG] This toy to entertain fidgety fingers in the form of a small switch with the typical "click" sound prints in one piece in about half an hour with standard settings. For successful printing, you need to have the first layer and flow…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
SIze cca width 152 ( C,F 172) x depth 60 x height 93mm. Wall depth 3mm. Holes for pencils (C, F) size 16x15,5mm. For papers size 90 x 90mm (use not glued papers). Tested 0,2mm, 2 wall loops, 15% infill. Filament need cca 40-60m. Other…
Organizer Office Compact, easy print without support. Short and Long versions with and without drawer. Size vesion With drawer: Short version lenght x width x height 115 x 103 x 135mm, Long version 155 x 103 x 135mm. Size Without drawer:…
Connecting the small parts with a one-layer-high line. This helps to adhere the small starting surfaces to the bed. Much easier to remove than a brim. Prusa project files are available to customize further.
For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .
I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…
This CENTER FINDER lets you draw a line in the exact middle of an edge! With and without ball bearings - M3x8mm screws for fastening down the bearings -608 Ballbrearing Print: PLA PETG
Easy printable without support. Cigarette box case 36 versions 9 sizes in 4 designs for 8 cigarettes sizes Designed for 0,15mm slicing and print. 9 different sizes in 4 versions. Use random seam. Model A…for 10pcs superslim long…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
Ich habe nur das Podest entfernt. ------ ENGLISH ------ I have only removed the pedestal. Print Settings: Printer : Bambu Lab X1C Print time : 0 h 59 min. Filament : PLA Filament Brend : Geeetech White Resolution: 0.16 mm Infill: 10% Brim…
I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…
Two small beer crates to store AA and AAA batteries on the IKEA Skadis perforated plate. Thus, the full batteries are always ready to hand. In the AA beer box fit 12 batteries and in the AAA box fit 20 batteries. Thanks to Jardar K 66 for…
Super Sonic Trophy from Smash Bros for Wii U except without the chaos emeralds or base. Flattened the bases under the feet so it can stand up.
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
This is a remix from Bridal Floral Tiara by Lorenz Nimmervoll , cater for easier print without any support. This require remove of the extreme overhand >45degree side curl. Added a tear-drop pearl, enlarge the whole tiara for grownup head…
Important! This version is obsolete , please use the new Hydra available on the page below, it has an updated design with removable/reversible spool guides as well as PTFE tubes replaceble from top: Hydra AMS Notice! This is only…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
The original model from @sraj had these both sizes of boxes, but the biggest one was presented only with internal dividers. I needed it without the divider, so I needed to remix it for myself. Boxes are simple, versatile and perfectly…
Chikorita pot, in two versions: with or without drainage hole. Modified to be a flower pot from a model downloaded from the internet. Macetero de Chikorita, en dos versiones: con o sin agujero de drenaje. Modificado para ser macetero a…
Small tractor with freely rotating wheels printed in just one piece. It is printed in the "on the side" position so no need to add supports. For a functional print, you need to have the first layer and flow properly calibrated (to prevent…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
Pencil stand easy printable 10 versions.
This is my first upload (please be kind) a model of a build plate holder i designed for 5 plates in Solidworks and printed it on my Bambu X1 Carbon in PLA. It fits the all the Bambu plates PEI, textured etc. It also fits the Prusa (MK3s+)…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
Shrimp tubes that provides a place for shrimps to hide in an aquarium (also a suitable hiding place for fry). Print instructions Two files available: -With feet, allows you to secure the tubes into the substrate (infill 10-15%) -Without…
Easy printable. It can be printed without support. Size big version lenght x width x height 106 x 86 x111mm. Filament need (big version) cca 52m (0,2mm, 2 wall loops, 15% infill). In 4 versions with and without cards holder and in big and…
Litophane frame from BambuLab without the Bambu logo on the top site.
Diameters 55, 75, 100, 120mm, height 50, 75, 100, 130, 160, 190mm. Walls thickness 2.5mm. Tested PLA 0,2mm random seam. Jars without coil:
[ENG] A small Bobcat with freely rotating wheels and a moving shovel printed in one piece. It is printed in the "on its side" position so there is no need to add supports. For functional printing, the first layer and flow must be properly…
This model is compatible with the lego system.
Organizer Office Compact, printable without support. Size lenght x width x hight 115 (145-C, E) x 103 x 95mm. Use not glued papers 90x90mm. Holes for pencils (E2,3) cca 13,4x13,4mm. C and E are long versions. Wall depth Base 5mm, inserts…
Just a quick remix: A clean armor chest - without the 13. So you can easily put your own sign or letter on it, for example with Prusa Slicer oder BambuStudio… Have fun!
[ENG] Miniature truck with tanker trailer and spare wheels printed in one piece without supports. The model can be printed either as a whole - tractor with semi-trailer connected (it is possible to disconnect it after printing), or the…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
Small truck - container[ENG] A simple model of a tractor-trailer fitted with a container. The model is available in two variants according to printing (in whole and with trailer and in individual parts), and in several modifications. The…
Models for a gundam diorama I was working on. Including both version without and without steps for anyone to use however they want! If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
This model is compatible with the lego system.
