8,073 models
Labyrinth puzzle box Outside diameter is 44mm, and 122mm tall The inner space of the puzzle is 30mm wide and 107mm deep This model can be printed without supports EDIT: V1.1 The parts are oriented for printability and without supports.…
Please check your roll size before printing. My roll diameter is about 10.6 cm. If this is to small you can rescale the model in the slicer program I recommend to set supports just under the free arms (use support-blocker at other parts)…
Instructions Install OpenSCAD (don't worry it's free and simple) Download NameTagGenerator.scad (below) and open it Edit name variable and then hit F5 followed by F6 (render), finally export the .STL file. Open NameTagGenerator.3mf…
This is an attractive little box to hold a gift card. All parts print entirely in vase mode. The box and lid fit together with a friction fit, and the two ribbon pieces also friction fit and hold the box together.
A reusable holiday gift box printed in PLA. Prints in two pieces, the base and the lid. Change the color for the lid ribbon with a pause and filament swap (built into the gcode file here). No supports needed. The pictured box was printed…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…
Quick and easy to print. Print with 0,2mm layer and change colours at 3,2mm. Owl & baby owl keychain: link here
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Hyper-K Micro Machine The Kei Drift Truck. Inspired by Japanese Kei cars. This is my own desing created from scratch. This model has steering wheels for drift action. Consists of 20 parts , Designed for easy printing without supports. I…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
What is more romantic/special then a personal (handwritten) message to a loved one? Use this envelope to deliver such message (or small gift) . The accompanying ones have an added decoration in the shape of a heart or rose as an…
A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…
Update: New Updated Model with a closing clasp, and a compliant mechanism ring holder insert! https://www.printables.com/model/769333-improved-gift-ring-box This print-in-place box with an insert for a ring is the perfect container for…
Quick and easy to print. Print with 0,2 mm layer and change colours at 3,2 mm (the base is 3,0mm and the outline is 3,4mm) You’ll find the ”best mom” keychain here
this is a fidget star to play with to satisfy
Description The is a model of the blaster used by the Character Korben Dallas, played by Bruce Willis, in the classic movie The Fifth Element. Modeled after a prop. Print instructions Print with your prefered settings, don't forget to add…
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Hello!! Here I have made a “kinda print in place” Birthday card, everyone loves a personal gift that says you love them and I'm sure that this card shows that, small in design to save on plastic and very easy to print, there are 4…
Just print with project settings. The knobs must be glued in the bottom part.
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch…
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
Using under 5m of Filament, and printing in less than 90min, this is a perfect little gift card box you can quickly print while you're getting ready to go to that party. It's formed by a base, lid, and “ribbon” which neatly fits around…
The Height Z Layer Shift Test is designed to verify that there are no layer shifts, ensuring stability and accuracy before attempting a model that utilizes the maximum Z height of the printer. Print settings Nozzle size 0.4 / 0.6 Layer…
You can insert the usual gift cards or other cards in check format into the side of the presenter. Insert the presenter obliquely into the stand. Material change has been stored in the g-code
I printet with PLA 0.2 mm Leyerheight. The fit of the inner Cylinder is tight, so you need to sand one half a bit down to remove the upper part easely.
Print approx. €7.24–€8.85 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No supports needed Scale it as you like :) You can print multi color keychain with a single nozzle (use this video for reference…
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Giftbox in shape of a heart for all your sweethearts ❤. Can be used as personalised gift for a wedding, every year valentine's day gift or for anything else. If you don't print a date on it, it's 100% re-usable😁 The heart can be placed…
4xM3 nuts and 4xM3x6mm bolts (best cap head socket screws) needed for assembly. After few test I found extenders wobbly, maybe trying print it with PLA will solve the problem. I'm still working on better version with supports to make it…
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
This model has a cool internal design with mostly single-perimeter walls and a build-in support system for the roof based on lightning infill techniques. Have fun!!
Zorg ZF-1 Pod Weapon. The Zorg ZF-1: An Ode to the Ultimate Multi-Purpose Weapon from The Fifth Element The Zorg ZF-1. The name alone evokes images of futuristic weaponry and chaotic destruction. This iconic weapon, wielded by the…
Phanteks Evolv Shift XT case modification to fit AIOs over *60mm tall. Made to fit the Phanteks Glacier One 240 30T AIO. But will work with other AIOs as well. The mod was designed to blend in with case. *Will fit up to 70mm tall…
UPDATE: for the lower pulley, I turned the strap 90 degrees so that the rope does not twist. I also uploaded the 3 print file g codes that will print all the parts nessesary in PETG. I wanted to have a few of these Pulley lifts as I have…
Just sharpie in the names. Hatchbox granite pla and overture black pla.
Heart - a gift for your loved one! - to each his own. Printed from TPU and PLA Infill 40% 0.20 layer height Slower speed for better tolerances
Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…
Pen Holder POLYGON Gyroid + Cubic (2 Diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Version 80 inside diameter (corner to corner): 82mm Version 100 inside…
This is just a different approach to a Gondola for a Polargraph robot. My main goal was to get the pen up and down to a smooth linear motion and make it easy to change colors. You need: 2 x 6806-2RS Bearrings (30x42x7mm) 1 x mg90 servo…
Right now I'm calling this style “ Relief Topography ” It's easy to print multi-color images on a single-color printer. I started with black and got lighter with each change. There are 3 stops built into the gcode where you can switch to…
You can insert the usual gift cards or other cards in check format into the side of the presenter. Insert the presenter obliquely into the stand. Material change has been stored in the g-code
To get myself even more display room for my LEGO cars, I decided to lift the larger vehicles so I could put smaller vehicles underneath. The model for this project is completely parameterized based on the LEGO tire dimensions and the lift…
Stop flushing your money down the drain for gift bags. Finally, a use for that cardboard tube when you've finished the paperwork after your porcelain cruise. Just a handy little template I came up with while farting around wrapping some…
Uploading...
I have a custom desk in my office built on an Uplift adjustable frame. This headphone holder should work on standard Uplift desks as well. I designed to fit my two needs, the Apple AirPods Max that I use for work and recreational…
Christmas card with small gift - mistletoe (single extruder print) Mistletoe and card are multicolor by lines - switch of two colors in single extruder.
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Meet the Mini Gift — the tiniest Christmas present you’ll ever see! 🎁 Height: 10 mm 🎄 Perfect for miniature holiday scenes, dioramas, or table setups A delightful little touch that brings cozy Christmas vibes — because even the smallest…
This is the track interface piece that goes with the Brio Lift and Load Warehouse. We lost this piece and the tower doesn't work without it, so I bought another whole set to model the piece. Brio does not offer a replacement part service.…
These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…
Hier ist ein Stiftehalter in Form eines Schweizer Käses. Es ist ein netter Hingucker für das Büro oder den eigenen Schreibtisch. Bei mir waren die Kinder sofort begeistert. Das Modell auf den Fotos wurde mit meinem Prusa Mini+ gedruckt.…
Držák baterie na podvozek Yokomo YD2 SXII, jednoduchý a funkční koncept. I po instalaci je stále možné použít odklápěcí držák baterie.
an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14
I'm posting it here in the odd chance it may this may be useful for somebody else… Printing instructions Printed in PETG with the default 0.2mm layer height settings. Two minor twists related to the two “hooks” on either side: They need…
Maße können wie üblich im Slicer geändert werden. Dimensions can be changed as usual in the slicer.
Pen holder or pencil cup for storing pens and similar office equipment on your desk. The cups have the shape of puzzle pieces and can be attached/assembled together. The cup is available in STL format in three different heights: 90 mm for…
Adjustable door lifter for installing and lubricating hinges on doors.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Scaled up from original model to fit the Mattel Brick Shop Elite Series brick sets. Can be scaled up to 330mm long (flat part the car sits on) to fit Premium Series cars too. Cylinders should be negative volumes if not already by default.
DécoTime Twinmarker von Action für 28 Stifte
nothing really big about to say…. There is one desing error in the hollow inner structure - I have to fix for the final version. Print it in the material you like, use the layerh height & infill density you like. For the attached STL…
Inspired by https://www.thingiverse.com/thing:2985668, but it was too big for what I needed, so here's a smaller version (prints in less than 2 hours). Very useful for seedling trays, especially those living in apartment balconies :) To…
Heart shaped jewelry dish. Has a curved side to keep jewelry inside. The model prints well in PLA and PETG. It scales really well. Gcode files supplied for PLA scaled all the way up to 300%. At 300% it takes up almost a full Mk4 plate and…
My main beef wit the new iPad Magic Keyboard is the flat tping surface. I have designed some "money slip-style" slide-on feet that lift the back of the keyboard up about 15mm, placing it at a comfortable typing angle akin to the “medium”…
Subaru transmission seal driver for shifter linkage fit 2002 to 2007 6speed transmission. Should fit other years but can't confirm. Can't confirm for 5speed either. Let me know !! Confirm for oil seal part number: 806716070 Make sure to…
Hallo zusammen, ich habe einen hübschen Stiftehalter / Stiftebox / Stiftehalter erstellt mit 3 Behältern unterschiedlicher Tiefe. Mit einem 6-Eck / Hexagon Muster.…
Hallo liebe Community Vorab erst mal vielen Dank an @Kutilman_Yuri für seinen tollen Stifthalter. Leider konnte ich die 3mf-Datei von @Kutilman_Yuri mit Autodesk Fusion nicht öffnen und einen direkten Remix machen. Vielleicht stellt er…
Wer kennt das nicht auf Partys, in Bars oder im Biergarten: ein leckerer Drink wird mit einem unsympathischen Papiertrinkhalm serviert. Daher sind in meinem Familien- und Bekanntenkreis Glastrinkhalme sehr beliegt. So entstanden die…
Die Ventilkappen Beschriftung dient beim Reifenwechsel der Kennzeichnung
This is a small PC you can print for a PC person. Use it as gift token. Fusion 360 file included so all you need to do is change the text to put someone else's name on it. You can also split the model on the desk surface and move the…
Summary This extended attachment for the thread of the Logitech Driving Force Shifter allows an installation on thin tabletops / desks and enhances the stability. Advantages Allows for mounting on thin tabletops Increases the stability of…
A simple Jarolift Remote mount where you can still use the controls. To mount it, you can use 2 small countersunk head screws
Simple solution to store Gift Wrapping Paper in a place where it doesn't take space away. A quick fix, nothing special. It ain't stupid if it works ;-) Printed with PLA.
Write the name on it with marker.
I needed to mount my SHH Shifter to my rig. Didn't order the bottom mount, as I wanted to place it square onto an 8040 profile. Created this handy little holders here. Printed 2, made them strong by using PETG and going ~4 perimeters, 25%…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Bowling medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
based on model -> https://www.printables.com/model/623861-doorstopper-footprint rescaled, cuted and printed in vase mode
The using indication can be seen in the photos. The parts aren't sticked together.
First of all, thanks to vojtz. for the model. A remix for the MK3.5. An MMU is required for printing. I got the best results with a 0.25 mm nozzle. The printing time on the MK3.5 with a layer height of 0.15mm and just under 3 hours is…
Einleitung! Ihre Z-Achse langweilt sich? Entdecken Sie die Genauigkeit selbst in schwindelnder Höhe! Sind Sie als Maschinenbauer-Bastler, wie ich, bestimmt auch noch nicht auf die Idee gekommen, Bolzen, Spannhülsen mit Wellenquallität,…
I suggest keeping the threads printing at 0.2mm on both the nut and bolts. other sections of the model can be printed with 0.3 layer height. I also removed the bottom layers and used a brim to limit the warping on the model base. There…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
I bought a Shimano Deore shifter (SL-M591) with an indicator display which I don't want. I still need something to prevent dirt & water ingress, so I made this. I removed the display, & while it has the tabs for holding the spare cover,…
Part can be printed in two pieces without affecting functionality. Attached are both the two piece and one piece model files. One piece print will require supports, two piece will print without, just add brim and print. On the two piece…
Man kann bis zu 5 Stifte griffbereit aufbewahren, die bis zu ungefähr 13 mm Durchmesser groß sind.
A fun gift box with something extra. Easy to customize with stickers, or a 3D program. I made it the right size to fit a gift card, but is deep enough to hold a necklace or other small items. Update: Alphabet stickers can be used to make…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant
My wife asked for a lifter to pull up only a few crackers (like Ritz) from this legacy container (RPI Cookie Cracker Keeper, not available anywhere anymore). I designed it quickly in Fusion 360. I made no effort to make it parametric, so…
Einfache Schilder die mit Kabelbinder angebracht werden können
EN: In the very simple and usable model of a filament spooler from 3D-Kalle, there are holes for attaching a pin to secure the shafts, but no pins are designed. Of course you could use a nail or pin, but metal is more slippery and…
I designed this convenient under-desk hanger for my Flea Ukulele, below my Uplift adjustable desk. The Uplift desk frame has many extra holes available so I decided to take advantage of them to store things somewhat out of sight. Check my…
My wife asked for a lifter to pull up only a few crackers (like Saltines) from this legacy container (RPI Stay Fresh, not available anywhere anymore). I designed it quickly in Fusion 360. I made no effort to make it parametric, so modify…
It would be nice if you post your make. Thank you
Gift box primarily designed as packaging for tree-shaped gingerbread cookies, made using my cookie cutter https://www.printables.com/model/1091674-cookie-cutter-tree . The box can also hold cookies of other shapes — the divider can be…
This is Coin Box for Tesla model 3 after facelift in center panel. It contains larger grooves for bigger coins and smaller one too. It prevents them to slide when driving. Container next to it has rounded bottom so it is easier to take…
Der teuere Schreiber soll nicht im Schmutz rumliegen. Darum ein Etui zum Schutz. Aus PLA gedruckt Print-in-Place auf dem MK4
This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of…
A sign with initials i made for a friends birthday. I designed the blocks in fusion360 and used prusa slicer with honeycomb infill for the rest. Printed with no top or bottom layers. the gcode file is for MY ender 3 pro with some random…
Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…
1:2 of a real life tennis racquet. The pieces need to be glued together.
