7,343 models
I wanted a little filter holder for my Hario V60 coffee filters, and needed something different from what I could find here. My design criteria: horizontal access to filters (will be located in shelf inside cabinet) slightly angled to…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing
Print approx. €9.15–€11.18 excl. taxPreliminary estimate for PETGSource material: PET
For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
Verlängern Sie die Lebensdauer Ihres Dyson Filters mit Leichtigkeit! Unser speziell entworfenes Teil passt perfekt zu Ihrem Dyson und ermöglicht es Ihnen, den Filter mit Leichtigkeit und Effizienz zu reinigen. Einfach den Filter…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
ENGLISH Cigarette holder with activated carbon filter If you like it, leave a like please Length: 80.5mm Diameter: 13.6mm Version 1: Suitable for cigarettes with a diameter of 7.6mm to 8.5mm (v1) Version 2: holder cigarette v2 6,6-8,4mm…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Hi there I hope you are still healthy. Because of Covid-19 pandemic I developed this printable mask. You can print it without supports and it takes about 5 hours to print all parts if you print it with 0.2 layers and 0.6 nozzle. I used a…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for PETGSource material: PET
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for PETGSource material: PET
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Co-author: @JakubJoziewic_498185 VOCs (Volatile Organic Compounds) generated from 3D printing (especially ABS) are known to cause severe health issues. This model is an updated version of Nevermore Micro V4 Filter created for 3D printer…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
A basic functional holder for #4 size conical coffee filters, such as those used by the Clever Dripper but should also be compatible with Melitta and other brands. This simple design is ideal for stashing in a cupboard and adds barely any…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
A simple coffee filter holder. Holds more than 100 Kalita wave filters. Print Settings Printer: Prusa i3 MK3S+ Rafts: Doesn't Matter Supports: No Infill: 15～20% Layer Height: 0.20～0.30mm Use the "Variable Layer Height" function if you…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
Since I only have hozes with the "Gardena" couplers, I remixed the original design and added the coupler. I advise to print it with the 5 nozzles facing downwards and add a large (10-20mm) brim around it so it is kept fixated to the bed.…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
Mount any 67mm camera lens filter to your iPhone. It's precisely measured to fit an iPhone 12 (Pro), without a case. I'm using it with a ND2-ND400 (9 Stops) Filter from K&F for filming. Advantages over commercial products I found: All…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
Print approx. €13.20–€16.14 excl. taxPreliminary estimate for PETGSource material: PET
A filament filter that snaps on to a PTFE tube, using a PC4-M10 coupler. Put a small piece of foam inside of it and ram a pointy piece of filament through the entire filter several times. This is to form a hole and remove any chunks of…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Full-face dust masks are very expensive but full-face military surplus masks are quite cheap. So I made adapter from NATO 40mm x 1/7 (gas mask standard thread) to Secura filter connector. Secura is polish local brand of safty equipment.…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
This mask, like many others, is designed as a fall-back to proper medical equipment in case of shortage. Features: Prints in less than 4 hours No supports needed Thin enough walls so that it can be cut with scissors and adjusted to fit…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Design Description: Sink Drain Filter This design is a specially crafted sink drain filter aimed at enhancing the cleanliness and functionality of sink drains. Compared to traditional sink drains, it is more efficient and user-friendly.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
We have a Juwel 70 aquarium in my kid's room. The original air diffuser, included by the Juwel BioFlow One Filter/Heater combo works fine, the water current in the fish tank was so strong, that the fishes acted irritated. Also, the tuning…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
9 position manual filter wheel for 1,25" diameter filters. My equipment is very heavy and the hobby of astronomy a little expensive, depending on the level of dedication you want to achieve. Because I like to do things myself, I designed…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This is an attachment for a bokeh filter. It fits over a 58mm lens. I designed the base free to rotate, so that I can make bokeh images in the background rotate also. Each filter slides into the top of the base. I have 17 pre-made filter…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
As promised this is a functioning part that replaced the Zortrax HEPA-Carbon filter. This can be used with the AirManager2 that can be found here:…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Auf der Suche nach einem Filterhalter und einem Griff für den 40W Laserkopf, bin ich zwar mehrfach fündig geworden, nichts davon gefiel mir so richtig, daher konstruierte ich eine Kombination aus beidem. Es gibt ein Oberteil, in das ich…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Fast and light adapter, kinda screw in, holds with friction. 52mm (lens) to 67mm (filter) Prints in about 20 minutes
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
It has been my experience that HEPA/Activated Carbon filters are rather expensive. So, I was delighted to find these P60 filters ( Non-affiliate Amazon US link ) at a resonable cost (~$5 each). I've been using them in my house in the…
Print approx. €4.22–€5.16 excl. taxPreliminary estimate for PETGSource material: PET
I'm using a portafilter to enjoy my daily coffee. After a short while (2 years maybe) I got annoyed by all that nice fresh milled coffee dropping down left and right from the filter! Therefore it was time to invent something completely…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
After one too many battles with an adjustable wrench on my Tiguan’s oil filter canister, I said, 'Enough is enough!' So, I designed my own 32mm socket to fit a 1/2" drive wrench—because who has time for all that? A few tweaks later, it’s…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a HEPA 11 air filter with activated carbon that can run on either 12v or 24v. It is to be used in a 3D printer enclosure. I have an enclosure for one of my Prusas that I use for ABS, ASA, polycarbonate, etc. While the enclosure…
Print approx. €11.80–€14.42 excl. taxPreliminary estimate for one variant
Find 3D-Printed RC cars here.
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: You can print a container for the gas mask in a variant with a biohazard symbol or instead of the biohazard symbol…
Print approx. €5.63–€6.88 excl. taxPreliminary estimate for one variant
I needed a holder for my 58mm portafilter holder for weighing and other purposes, so I created this rather than purchase an expensive (and unnecessary) metal one. Also works with naked portafilter (which took a little work because the…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
Suitable for everyone: You are about to print/build your enXLosure and want to include a HEPA filter. You might incorporate a HEPA filter in the future and want to be prepared. You want to retrofit your enXLosure with a HEPA filter. There…
Print approx. €13.02–€15.92 excl. taxPreliminary estimate for PETGSource material: PET
Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
This dosing funnel was designed for a Crema 54mm bottomless portafilter and used on a Sage/Breville Barista Pro espresso machine . The part was designed using OnShape and the file is publicly available here:…
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for one variant
This project has been on my list for a while and this contest motivated me to get it done. This is a solar filter for a Celestron NexStar 8SE for viewing and taking pictures of the sun. The glass can be picked up through Amazon for $10 at…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET
Minox 35ML & GL 30mm filter adapter. This adapter replaces my old adapter: https://www.printables.com/model/173716-30-mm-filter_screw-to-push-on-adapter-for-minox-35 IMO, this one has a much better fit and also shows the distance scale.…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An ECM portafilter can be stored in the device. In the back, there is one recess to add fabric pads for proper alignment and to create a…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
A simple rotate and snap-in solar mount for the Sigma 150-600MM F5-6.3 DG OS HSM | C. This fits in just like a lens hood. Just clip your solar filter on the edge of the mount. Easy print, no supports needed.
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
This is a holder for a Portafilter fitting a Rancilio Silva
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Pool / Water filter wrench Print with 4 or more perimeter and about 20% infill. Innerdiameter 95,5mm Outerdiameter 99,4mm Step files included
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Old hanging coffee filter holder need to be replaced. I need one that can hang or can stand on the table. I decided to design my own. I have accepted the print time which is more than 8 hours, to get a sturdy model, otherwise I need to…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Transport Dose für Objektive Rundfilter mit 77mm Durchmesser. Platz bis zu 12 Filter. Dose ist mit Schraubverschluss. Zusätzlich kann auch am Deckel und Boden noch ein Schaumstoff geklebt werden.
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
Elegoo Phecda laser cutter & engraver carbon filter extension. For more filtration of odors. For carbon filter mats and carbon granules. Before installation, remove the original cover for increased airflow. The original filters can be…
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
This is a filtering cover for a 115x115mm square drain. Print instructions Use 100% infill or enough horizontal layers to make it solid.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
This fits on a 2-ear, portafilter with OD 62 mm and basket ID 51mm. The coffee can be tamped with the funnel in place. The funnel locks onto the ears of the portafilter. Print with PETG to be food safe. Print the funnel upside down, with…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
Hlavní velké sítko stačí zasunout z vrchu do odtokového otvoru. Malá sítka s redukcí na hadičku se instaluje do předem předvrtaných otvorů v místech, kde je pouze malá odtoková dírka. Doporučuji předvrtat vrtákem průměru 10mm, následně…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
V02 - Updated the angle for the screw hole to make it 90° with the angle of the grinder, and made the bracket a bit longer to compensate with the new angle. - A simple bracket for the DF64 grinder to grind the coffee beans directly into…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
Tested on Nikon Z in DX. This will create a vignette in FX format. A larger window was not preserving the form (more updates to come). Simple single layer print in PETG. Take care when removing a print made with PLA. The print material…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
My son recently bought a very low time 2019 Kawasaki Z650. When we went to do the first oil change and remove the factory installed filter it was very difficult to remove( I think it was installed dry). My cheap set of cast aluminum oil…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for PETGSource material: PET
This is designed specific to the dimension on the Normcore Breville espresso machine portafilter. The Normcore portafilter was slightly different than the Breville portafilters and using other funnels didn't quite fit. The inside…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
just a simple holder for activated charcoal pellets. great for closed smelly areas(shoe closets, fridge) you can adjust the fill ratio for smaller pellets g-code is designed to make 2 of them so if you want to make only one, please use…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
DIY Respirator box with HEPA + Carbon filter and oxygen mask with corrugated hose for example. Box has variable dimension settings like OpenSCAD source file.…
Print approx. €7.72–€9.43 excl. taxPreliminary estimate for PETGSource material: PET
ADDENDUM : When I originally made these in Aug. 2022 I had some concerns that PETG might not hold up well in hot chlorinated water. As I write this in March 2024 I can report that that the prints still look as good as when I originally…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Karcher WD3 zajišťovací klíč navzduchový filtr / Karcher WD3 lock key airfilter Sliced for MK4
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Adjusted the airflow for some 120mm be quiet! fans and made it one part as it fits my heatbed on a prusa printer. Filter: https://amzn.to/2Te0xQD Fan: https://amzn.to/36OjNZB Remixed from demikelo on Thingiverse:…
Print approx. €5.41–€6.61 excl. taxPreliminary estimate for PETGSource material: PET
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
No supports needed for the print. Would recommend either PETG or ABS depending on where your filter is located in your house. The filter comes with some screws, but M6 screws with a coarse thread should work. M6 Screws should also work…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for PETGSource material: PET
Print settings: Material: PLA Nozzle: 0.4mm Layer height: 0.2mm Perimeters: 3 Supports/brim: NO Two colors: change filament after first and fourth layer, or use MMU (AMS). Note: STL files are oriented to print
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
The filter is 0.4mm thick. You can customize the hole size by changing the infill % of “core_one_filter_C1” in core_one_dust_filter_C1.3mf. Install dust filter between the top panel and the vent cover. used settings; 50% infill % in the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Lunt Solar Systems ERF Energy Rejection Filter) sleeve for refractor SkyWatcher Evostar ED 80/600. Contains two parts: filter sleeve and cover. It must be screwed together with four 10 mm long M3 bolts with conical head. Inner diameter of…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
CORE one HEPA filter solution that doesn't restrict air flow from printer. Utilizing a standard Honeywell “D1” HEPA filter, the printer can be pushed against the wall while maintaining a large cross-sectional flow area. Components are…
Print approx. €3.83–€4.68 excl. taxPreliminary estimate for one variant
Embut amb filtre per separació de mostres sòlides incloses en solucions alcohòliques, formol, etc, Model petit escalable a mida més gran. (Small model scalable to larger size.)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for one variant
This duct let you use a NOMA Personal Air Purifier to filter out the small filament particules
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
This mask, like many others, is designed as a fall-back to proper medical equipment in case of shortage. Features: Prints in less than 6 hours No supports needed Thin enough walls so that it can be cut with scissors and adjusted to fit…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for PETGSource material: PET
This adapter can be used in conjuction with a reverse lens adapter and a bellow or macro tubes to attach a RMS mount microscope lens to a digital camera.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
EN: IBC Tote NW150 Leaf Filter Basket A custom-designed leaf filter basket for the top opening of an IBC Tote (Mauser 1000L) with an NW150 (6-inch) thread . It effectively catches leaves, moss, twigs, and other debris coming from your…
Print approx. €10.65–€13.02 excl. taxPreliminary estimate for PETGSource material: PET
DSLR filter wrench (58mm-67mm 100% work)
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE March 2023: There is now a v2 of this model that is attached magnetically (turns out the locking prongs in this one tend to be a bit fragile and can snap off if mistreated). ---- A funnel to help filling 58.5 mm protafilter baskets…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for PETGSource material: PET
A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on a custom filter add-on for the Prusa Core One. Based on the idea of PrusaPilot to use a Tesla Model 3 HEPA filter, I optimized my design for print speed (<2h, 0,25mm SPEED profile on Core One with 10% infill), filament…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
Ein simples Filterelement zum Einlegen in eine Dachrinne mit rechteckigem Querschnitt. Es soll verhindern, dass grobe Schmutzteile in die Regenwasser-Sammeltonne gelangen. Das Element ist 70 x 60 x 33 mm groß und wird - Achtung - im…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the “Bang Safe!" portafilter safety clip. I designed this to fit the Breville 54mm Portafilter (BES870XL) but it may work for other 54mm portafilters YMMV. Please see the photos for more detail on how this attaches to the…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
This is a mounting bracket designed to be used with StanleyB 's Internal active air filter . Once mounted, the air filter slides into place for easy removal to change the filter or replace parts.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
If you want to chop and distribute your coffee grounds before tamping so that no channeling occurs when the coffee is drawn, then this tool is the right one for you. You don't need expensive needles, you can simply use a standard 0.9mm…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
When I found out I would need to stay in a shared hospital room overnight for my knee surgery, I knew that I would need something to filter the air going into my CPAP machine. Not only did I want to prevent bacteria and viruses (think…
Print approx. €3.53–€4.31 excl. taxPreliminary estimate for one variant
Basic Stand for the stock Decent espresso portafilter wich can be mounted on a grinder especially the Niche Zero. This remix adds a hole into the base plate of the stand, so it can be screwed onto the base plate of the Niche grinder or…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
T-slot turn screw/flange that allows you to use a cheaper (big box store) HEPA filter made for the other, louder brand of shop vacuums on a Fein 9.77.25 Dust Extractor. (Please comment if this works for more brands or models, and I will…
Print approx. €1.44–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
If you're long enough into specialty coffee or tea and successfully climbed out of the rabbit hole of mixing the perfect brewing water yourself, you will eventually buy a more reliable water filter system than those table jug or pitcher…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for one variant
Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
This filter is smaller than the S-series filters so I've designed a filter cleaner for this type of filters. Filter size approximately 107 x 46mm (length x width, without clip) Inner diameter: 32mm No specific filament needed.
Print approx. €7.86–€9.61 excl. taxPreliminary estimate for PETGSource material: PET
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
EN Bayonet mechanism repair insert for type 6001 filters (see photo) for gas/powder masks. If the filter no longer attaches to the mask, print this model and attach it to the filter with two-component glue. ITA Inserto per riparare il…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I created this as a replacement for the standard filter intake cage. We had some baby fish we wanted to make sure didn't get sucked into the filter input. The openings on the standard intake cage were too large. This design replaces the…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
For BSP Thread 1 3/4 Inch. There is also a distance holder for floating objects.
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
Next level for instant photography. Adapter for use standard circular photographic filters on Mint brand retro style camera. Available version: 37mm, 39mm, M42, 46mm, 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm and 77mm Print settings:…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
