849 models
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Kleines Glücksschwein für Silvester 2023.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Built for stability and to make the transport of ammo less obvious, because I'm sick to death of standard factory 10x2 trays tipping over on the range table and being “in your face” during transport. Each segment has a recess in the…
Print approx. €8.87–€10.85 excl. taxPreliminary estimate for one variant
This is a front bumper that allows for good approach angle and has a much narrower profile then the original. My front bumper kept getting caught on the tires, so I designed this. I used PETG-CF as the main material and used PLA for…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for PETGSource material: PET
Openframe.stl is frame only (~2 hrs to print). You just cut cardboard back the outersize of frame and glue to frame. You can then paste your license print to the cardboard and there you have it using minimal filament (pla) hamlicense…
Print approx. €4.96–€6.07 excl. taxPreliminary estimate for one variant
Use these tools to add seam allowance to your sewing pattern: either increase the existing seam allowance or add more seam allowance. Sizes Available is both a set of metric and imperial tools. Metric tools range from 5mm to 25mm in 5mm…
I wanted a small bowl with an organic shape, so I designed a simple bowl in onshape and then used Blender's sculpting tools to give it a handmade look. The pre-sliced file prints with fuzzy skin enabled.
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Quick assorted collar stays in various sizes. Includes 2 inch, 2.25 inch, 2.50 inch and 2.75 inch (51mm, 57mm, 64mm, 70mm). These can be printed before you figure out how to tie a tie!
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I wanted a way to store my models for transit that didn't rely on magnets or take up space like foam did - and also just looked and felt cool enough to be remodeled into a mech hanger or storage bay as a display. This is the weekend worth…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for PETGSource material: PET
Usually they are made of metal. I found it practical to try it using with ASA and it seems that in low torque values up to 50 ounce-force-inches this module is functioning good enough for my needs. So, I printed it using ASA (in a closed…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Classic Ruler design because I need a good ruler.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Really wanted to have a access to a reliable 3D-printed cable tie that wasn't tiny. So I created this 8 inch standard cable tie. Works really well and reliable for me. Haven't had any issues so far. If you apply enough force to the…
Feeling the pressure to squeeze in one last gift this Valentine's day? This playful 3D print could help you in a pinch! There are three styles available - light, firm, and OUCH! Choose wisely. Be sure to print in PETG, and add extra walls…
I couldn't find a good model of grinch cookie cutter, so I created my own. This is my first attempt of cookie cutter. Nemohl jsem nikde najít dobrý model vykrajovátka Grinche, tak jsem se pokusil vytvořit vlastní. Je to můj první pokus.
This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form. There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly…
I maked Vernal Flower Bunny Decoration With Stand for Easter or Simple Home Decoration. PLA 17cm height Happy Printing
Here is Winchester Action leaver Toy Gun. Do check the components work for you as was a suspended project. Print instructions Category: 3D Printing
The .308 Winchester is a rimless bottlenecked rifle cartridge. It is very similar to the 7.62x51mm NATO cartridge, and the two can be used interchangeable according to the SAAMI. Category: Sport & Outdoors
Nutcracker over 24 inches tall printed on Prusa Mini+. Printed with PLA at .2 mm layer height 15% infill (I like gyroid), 2 perimeters and .4 nozzle size. No supports required (the head printed fine upside down without supports). Parts…
This is a remix of Milos V's rugged box designed to hold 25 rounds of 308 Winchester bullets. I reload bullets, and this is a nice way of keeping my precision ammo organized and ready for transport to the range. The bullets are held…
.308 Winchester, also known as 308 Win., almost identical to 7.62x51mm NATO, is a centerfire rifle cartridge. .308 Winchester was designed in the United States of America by Winchester (using Frankford Arsenal's designs) in 1952. The…
Upgraded articulated print-in-place ruler, now also on Printables! I use this for wargaming, the starting end is curved to fit nicely to a model's base. Upgrades: The joints of pieces are now positioned so that smaller lengths can more…
Standard Drill bit set wall mount .0625 to .5 inches
This 12-inch/30cm ruler features distinct markers for - Metric: -1cm, 5mm, and 1mm Imperial: -1 inch, ½ inch, ¼ inch, and 1/16 inch Model is oriented to print on a MK3/4 in a standing-wall orientation. 3mm brim recommended. Printed at…
Quick putty knife that worked great for patching some drywall. The blade is just shy of 5 inches. Easy print on an MK3 with PLA at 0.2mm.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
This is not exactly a remix, but a pointer to another publication from which I took the STL files for this print. https://www.myminifactory.com/de/object/dean-winchester-s-first-blade-from-supernatural-26080 Done by…
Just a simple 6-inch ruler I made for Printables. Should do fine without supports.
.308 Winchester/7.62 mm X 51 mm labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Based on the 308 round model by is-serp, this round has a slightly muted tip to help prevent printing issues with a standard 0.4mm nozzle. Use dummy rounds when practicing loading your rifle or magazine. I print this with 3 walls with 40%…
Pinched Toyota body for 1/10th scale, made the roof taller.
Recommend outdoor material if planning on using outside. I sized this to be what I found online as a standard gnome size and can be printed on a normal sized printer. PLA would work for shaded outdoor areas but why take the chance print…
After printing the original model of the Runabout i wanted te build a bigger version. One that could have LED lights installed to make the model come to life. The model is 1/70 scale and so the total length of the model is 33 cm (13…
I used the Vilcoyote77 7.62x39 50rds box as the basis of this box, but there's really no specific part of that design left. I had orgininally made these up for test batches, but they are small enought to slip into some pockets, so these…
I couldn't find any stl's for side saddles to fit my Winchester SXP Defender 12ga Shotgun, so I made one of my own by remixing a couple parts into one solid piece. Instead of sourcing the very obscure #6-48 screws that the SXP series…
Happy New Year Pig 2024 You can change filament color after the shamrock.
Printed pieses can be put together with plastic glue and plastic welding. For help please contact [email protected]
.30-30 Winchester, also known as .30 Winchester Center Fire, .30 WCF, or just .30-30, is a centerfire rifle cartridge designed in the United States of America by Winchester in 1895. Print this for props, display, education, training, just…
Bullet quiver that holds two extra 30-30 Winchester cartridges to the side of your rifle. These will fit standard m-lok slots using t-nuts similar to what can be purchased here:…
This is a sand scoop with a diameter of 100 mm.(about 4 inches)The height is about 150mm. (about 6 inches) It can also be used to filter out cat poop. The material used was PETG. ADD Added 5mm hole type for cat poop shovel.
This tri-hex planter pot is the perfect size for small to medium sized succulents, cacti, or other houseplants. The unique design balances form with function, including drainage holes and an optional, custom-fitted drip tray. Height: 4…
Just a fun model created in Fusion 360 - see if your printer is accurate enough to print a ruler! Printing Instructions Make sure to enable ‘Detect thin walls’ in the print settings. Add layer changes to print the ticks and numbers in…
This is a 2 part 308 Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This…
Ein Schweinchenspiel zum selber drucken. Im Gegensatz zum Original ist die äußere Form pentagonal. Die fünfeckigen Teile sind aber recht groß für einen Ender 3 Pro…passt aber wenn man den digitalen Homunkel vorab im PrusaSlicer richtig…
This is a ~13cm high model of Dean Winchester from Supernatural, originally created by Eoten93. It has been optimized for fdm printing by scaling it up and slicing dean in half. Additionally i have separated and modeled a new base that…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
I have included two versions: Golf Tee Setter_No Multi Color: Just print this as normal, there is no need to split it into Parts. Golf Tee Setter_Multi Color: Split this into “Parts” or "Pieces", ( however your slicer defines it ). Then…
Please give it a ❤️ if you like it 🥰 Video : Please give it a ❤️ if you like it 🥰
My wife asked for a 3d printed quilt square template that was more precise and durable than the several cardboard squares she had been using. The outer edge is 10 inches and each outside square edge is one inch smaller down to 4. The…
Based on the 308 round model by is-serp, this round has a slightly muted tip to help prevent printing issues with a standard 0.4mm nozzle. Safety flag added using Blender. When using a firing range, the range-master may call for all…
Needed a frame and was surprised to see there weren't more simple options to choose from. I whipped this up in tinkercad and after a few iterations settled on this. Designed to fit 5x7 inches, with a bit of room on all sides because I…
A dimensionally correct .308 casing. The bullet opening (top of casing) has a wider opening to accommodate 3D print expansion and bullet size. However, exterior dimensions of both the casing and bullet are per the 308 Winchester Spec…
This is a scare and dimensionally correct print of a 300 winchester mag cartridge. Category: 3D Printing
2.5cm (0.98 inches) The sizes are approximately! Do you need other sizes? Contact us! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…
Say hello to Pinchee - a fully 3D-printable, 2-player dexterity game where players pinch their bird to stack twigs on a cheerful elephant. Combining fun with finger and wrist exercises, it’s enjoyable for everyone and offers particular…
This is a remix of Bruce's Winchester sized primer dispenser along with the original CCI sized dispenser at https://www.thingiverse.com/thing:2939986 I added pegboard pegs on the back of each so I can hang them to make room on my…
Für alle die gerne Backen und Meerschweinchen lieben. / For all those who love baking and guinea pigs. Kein Support erforderlich. / No support.
Great for running cables in 1515 extrusion from 8020 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: DIY
Reloading tray for .308 Winchester. Fits also for smaller caliber.
Handy tool for scribing using a standard Ticonderoga No. 2 pencil or similar. Scribe widths are 1/4", 3/8", 1/2", 5/8", 3/4", and 1". Available in three lengths: 1", 2", and 3".
Football kicking block. Designed in Tinkercad. Used for extra points or field goals. I added our “chix” logo on the slope. Made with PLA. Infill 20% grid. Feels sturdy, but I will test out in the actual field. Finished product with…
Simple print for sports shooters and hunters.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
A hand with pinched fingers holding a hook. This model prints in-place. There are two versions of the model, one that has a swivel hook and one that has a stationary hook . Please double check that you are printing your intended choice.…
Dieses Modell ist identisch mit dem wirklichen überragendenem Design von Nicki . Allerdings unterteilt in zwei Teile so dass diese zwar ggf. zusammengeklebt werden müssen aber ohne ständigen Filament Wechsel. Für uns war es sehr hilfreich…
I remixed this part to fit my Winchester SXP Defender Shotgun magazine tube. Might fit others as well. Still uses the same M3 hardware as the original design. Here is a link to the hardware and flashlight I used: Metric Screws:…
A chamber safety flag for use on firing ranges, size suits a rifle chambered in 308 Winchester. This device allows a range supervisor to see at a glance that a rifle has been made safe.
300 Winchester Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
A dashboard for Sim Racing using a 4 inches display of VoCore. https://vocore.io/ Cable GX12 made by KHOR: https://khor.store The best custom sleeved cable you could have. The hole printed on the base enclosure is for a GX12 connector.…
I took BigMrTong's excellent CCI primer dispenser and increased the size by 10% so Winchester primers will fit in. https://www.thingiverse.com/thing:2939986 I also tested it with Tula and Wolf primers. Caution - If you are using CCI…
The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar but not identical to the 7.62×51mm…
Chibi Style Dean Winchester - Supernatural
Most of models available for download are created for 2 ½ and 4 inches hoses and none of them is a parametric model. So I decided to create a dust separator that fits to 3 inches dust collector systems. It is a bit large, and maybe you…
The top sliding part is held in place by 7x2 piece of 2x2mm magnet. Feel free to change the magnet size,count or the front design with the .f3d files!
Picatinny rail Model 94 Winchester 30-30. Mounts underneath to enable mounting of accessories like tactical light or bipod. NOTE: Stand on end, with support when printing.
SUMMARY Howdy folks! Meet Grinchester, a quality-of-life remix of the Vulture by MrHeathPants. The main focus was printability tweaks and converting from heat set inserts to M3 nuts. I also made small changes to part tolerances and…
Existem 2 arquivos, um para sua impressão de FDM (filamento), e um para a impressão em resina.
I made an insert for my .308 Winchester. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.
Gridfinity model for the Imperial version of the Wera allen keys.
Ammo case for 10x30.06 Printed with Verbatim RED PETG and Prusament Jet Black PETG 0,30mm 4 Layers. Text depth is -0,55mm so you can change color at 0,50mm I use 2mm Stainless Steel Tig welding pin for the hinge. Hope you like it
308 Winchester/7.62 mm X 51 mm labelled loading block is sized for rifle cases with a rim diameter of .473" (12 mm.) This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.28 Infill: 10% Material: PLA Filament Change: 3mm Black 2mm Red rest in White
Easy to print, no supports needed – printed in PLA (0.10 mm Fast Detail). One 1-cent coin required. The coin fits snugly and can be inserted after printing.
This is a holder for inch size drill bits from 1/16" to 15/32" in 1/32" steps. I have added a couple of extra holes for the narrower drill bits, I like to have some extra because I tend to lose them or they can break off from time to…
Chibi Style Sam Winchester - Supernatural
I remixed my previous model to be printed in 256mm printer beds without cutting each part. The edges were removed and groves were inserted to allow gluing the parts instead of using screws. I increased the botton funnel to 70mm hole to…
I noticed there wasn't much from Supernatural, so I made this lithophane of Dean Winchester's “Blue Steel”.
Grinches Coffee Designed for Colour change at layer heights. Step File included has all colours at the same layer height to print face down for a nicer finish than the different layer heights version
While you can cheaply order more shells from Ali Express these can just be self printed. They miss the rubber at the bottom and are a little shorter but i didnt see any worse performance. Them being slightly shorter than the original…
A full set of radius-gauges from 1/16 to 1 inch in 1/16 steps, quickly to print (fits a mini). Also a fully customizable OpenScad-file for you to create your own gauges. Open it in Openscad * or in one of the browser versions of it ** and…
The top sliding part is held in place by 7x2 piece of 2x2mm magnet. Feel free to change the magnet size,count or the front design with the .f3d files!
Axe Handle .... 31 inches long , needs to be broken up !!!!!
7.62×51mm NATO is nearly identical to .308 Winchester, and is the same caliber used by the Halo MA5B assault rifle. -Use for cosplay, short films, display piece, etc. -Should not be used with real firearms -Please use responsibly Print…
Just a touch too large for a 250mm print bed. I had planned to print it in two pieces for myself, but will probably just wait for a larger printer (Prusa XL) for the absolute best finish. Posting it now in case you already have the…
By popular demand, 36 inches long articulated print-in-place ruler, now also on Printables! My wargaming buddies use these for OnePageRules, but will work for any gaming system that uses inches! The included 3mf file is openable in all…
