69 models
Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…
This model is compatible with the lego system.
Print two of these half-sprockets flat side down (no supports needed) and then superglue them together. Don't use too much superglue! Depending on your printers accuracy you may need to clean up the 6 pin holes with a 4.8mm drill bit and…
I wanted to make some drawer organizers for the Festool Sortainer that grabbed the indentations in the bottom of the Sortainer drawers, so that when you hadn't filled the drawer, the boxes would not slide around. This also keeps them…
This model is compatible with the lego system.
StageTop Hexagonal (Hex) PlayTile for Battletech, Gloomhaven or other Game but with indented hexes. Remix from: https://www.printables.com/model/438818-stagetop-hexagonal-hex-playtile-for-battletech-glo
Optimized to print on its side to avoid any support. Even though this may seem like a simple model, it still takes time to create, refine and test. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a…
While trying out Sony hot shoe covers for my A6700, I wanted to test out making them out of some of the Proto Pasta Copperfill PLA that I had on hand, and then sanding it smooth to bring out as much of the copper shine as possible as an…
New Version Available! Check out my Yarn Minder 2.0 with Swivel Stand for a Yarn Minder with a more secure fit. Yarn Caddy/Minder with Indented Slot This is a remix of Hal9000v2 's Yarn Caddy that includes an indentation in the bottom of…
Indentation Heat a cup head bolt or a similar rounded object to approx 80°C or higher (by putting it in a cup of hot water for example) and push it slowly onto the keycap to form the indent. I used a M6 (I think DIN 603) cup head bolt.…
Insert to convert the Utopia Cereal Containers (with indentations) into a filament dry box. Desiccant box prints separately and snaps into place (so it can be swapped out or dried separately).
At the request of a follower These are two basic mando style helmets (one kind of like a praetorian guard) No cheek indents.... kind of gives them medieval vibes. I've not cut them up .. i'll leave that to you .. no cheek indents means…
This model is compatible with the lego system.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Remix of original model sanding mouse to add indents for 3/4 inch velcro strips.
Only need bolts and lock nuts to stack and very secure. Very simple. Easy to open with your finger with an indentation. This is for 1kg filament spools. Category: Organization
I designed an adapter to mount indicator with m8 screws to the original triumph indicator mount. The spacer is used on a Triumph Street Triple Model 2023 behind the original mount for better accessibility to the nut. The adapter can be…
Removed the square indents on these parts as causing stringing/bridging problems
The original had extrusions unlike the image they posted so I quickly remixed one like the image. I included 3 different files, a standard size, a file for laser cutting, and a 0.2mm version in case the standard one is too thick.…
Prints well with PLA at 0.10-015 mm and ironing the top layer for a nice finish. I didn't put indents on all the cubes because they tended to interfere with the hinges. Might experiment on that a bit later…. I did first put indents where…
c clamp that I created to have an indention and wobble head. I haven't printed it yet but says it will take 4 ½ hours and use 65g of filament.
After trying a couple of other horizontal dragchain models for my Voron Trident 350 (XOL with Sherpa mini and EBB36), i found that the chain would drag on the X Gantry, sometimes causing a layer shift. I used modified the EBB36 Sherpa…
you can rub a crayon over this indentation letter stencil to create a unique message. simply slide the letters into the base and have fun. Printed at .2 No supports
For 608 bearings, made with PETG, 10 perimeters and heavy infill for some weight and durability.
the newest thing to be spit out by the What The Mutt Studios 3D Design Division, this is a face thing for the Loftyos! below is the link to the model in TinkerCAD so you can modify it. I wanted indentations to make coloring in the slicer…
This has little indentations that accommodate the stock spool holder’s screw points because the metal there is not flat, protruding just a bit.
Surprise a loved one with a packed heart of heart shaped candies, maybe? Or store anything else. Prints fairly quickly and without any special tuning. Printed on a 0.2mm layer height in PLA, no issues.
A control knob with an added divot for the finger to avoid accidental rotation when pushing it in as a button. Small mod but has been a nice little quality of life improvement for my fleet of minis.
I didn't like how thick it was so I just dented it. not the best but it works
Print with vase mode
After printing out the blaster, I found the indents in the side pieces did not line up with the indent in the barrel.
Positionsrahmen zum aufkleben auf die Ladeschale. Erleichtert es blinden und anderweitig eingeschränkten Menschen die Ladestation einfacher und sicherer zu benutzen. https://m.media-amazon.com/images/I/61L+nQF9btL._AC_SX679_.jpg…
I liked the design from ViperMan but wanted a couple changes: A stronger connection between the bottom and top pieces Indented numbers so I can paint them without the top scraping off the paint The top and bottom weren't staying connected…
A unique 3D printable creation — this Smooth Worry Stone Fidget, Thumb Indent, Textured Back, Anxiety Relief, Pocket Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Another style of pen cup I have designed, printed at 0.3mm layer height.
THIS MODEL HAS BEEN REPLACED WITH A NEWER EDITION. THE FOLLOWING IS ONLY FOR REFERENCE PURPOSES. The update version can be found here . This is a Remix of the amazing Raspberry Pi Zero minimal flat case by Skov Knudsen Inventions. It has…
More notches for plant identification. You probably know what they are for... Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 0,5 Hours Number of print files → 2 Layer height → 0,2 Layer…
A simple phone stand with a cutout for a charge cable and phone-ledge high enough off the table surface so a charge cable doesn't bend too much. It also features indents on the bottom that accept 10mm(3/8") diameter x 3.7mm thick…
I really like this model https://www.printables.com/model/151973-drawer-organizer but wanted to have less chance of items shifting between compartments. So I created some indents in the panels and also made some larger ones. To print the…
I could not get the original central spur to fit because of the ring on the metal gear. This variation has a slight indentation at the bottom (6.8mm* 0.5mm) for a better fit. Category: R/C Vehicles
This is a remix of a remix of a remix the toy easily came off by itself so I added an indent Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Category: 3D Printer Accessories
My take on making the mouse lighter without compromising strength. Also added side indents on the sides for claw grip.
This is a tool for removing or installing the button bezel on Wurkkos/Sofirn branded flashlights with the translucent 15mm wide button like the one shown below. 0.4mm nozzle and 0.2mm layer height is recommended. Print STL in default…
This is a friendly reminder to indent into your bread.
This design is printable with or without supports, but only from the build plate. Printed with internal supports, it can be difficult to remove without destroying the print, in my experience. Print Settings Printer settings: Printer: Any…
A quick and dirty remix to support the Belvita brand filter (with a "Y" indent)
quick remix, added indent for pushpins and 2 extra file slots.
Cute candle mold with heart indent.
The IWISS HD-2612D and similar crimpers have a positioner that screws into the back to hold the contact at a specified depth during the crimp operation. This positioner makes the whole unit too thick to fit in most toolbox drawers.…
Scrapbooking tool. Ruler with padding
Indentation for cables for ikea lack enclosure bottom corners for remix of 2023 update ( https://www.thingiverse.com/thing:5920171 ) for rear bottom corner for orignal enclosure project ( https://www.thingiverse.com/thing:2864118 ) and.…
Now you can freely position the table without having it sliding around. The attachment hooks of the table will now engage in the teeth of this indentation track and hold the table. Consider printing it diagonally! Remix or modify…
Small indent on the front thumb button. Making one for the back too.
Separated print of lid and knobs (tapered for tight fit) This 2x2 lid does not need to be aligned with box when closing
Apple watch charging stand with logo, indent or multicolour. No supports required Choose either indent or colour version, colour version requires over 100 filament changes so more suited to tool changer. Variable layer height prints…
a cover to cover the indents in my other model (drawer organizer) cut to size
Strong—3 screws per piece. There are corner pieces and straight ones. Enjoy!
the model is a side table pre sliced and the front mug is now dovetailed in will need glue for the rest of the parts
It is a pot/vace that is widest it outer diameter at the bottom then shrinks down smaller at the middle and gets almost as wide as the bottom again at the top. Then all the fromt the bottom to top there are three indentations that run up…
Remove the bottom drawer and store more cold drinks But then the drinks fall over because of the structural indent Fill the indent with a perfectly sized 3D print, now drinks don't fall over! Print with largest side on print bed, PETG…
Insert to convert the Utopia Cereal Containers (with indentations) into a filament dry box. Desiccant box prints separately and snaps into place (so it can be swapped out or dried separately).
My take on making the mouse lighter without compromising strength. Also added side indents on the sides for claw grip.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
a cover to cover the indents in my other model (drawer organizer) cut to size
the model is a side table pre sliced and the front mug is now dovetailed in will need glue for the rest of the parts
Cute little key charm to make it easier to find your house key. It's optimized to print on its side to avoid any support. Even though this may seem like a simple model, it still takes time to create, refine and test. If you’d like to…
3D MODEL DESCRIPTION This is made by a bath bomb maker. Tested and easy to use. A great cute design with easily released details. The depth is perfect for adding embeds or even embed bars for added colour. You can scale easily. Please be…
![-- OUTDATED -- Raspberry Pi Zero minimal flat case with LED indicator hole & rubber feet indents.[Remix]](https://media.printables.com/media/prints/45051/images/448007_28a944ba-9a5b-4b9a-bd63-7aaf74e502ee/20201024_085732.jpg)
