Counting matching models…
Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle). I used some…
With the frame, you can protect your tokens. You need 219 pieces if you have all the extensions. I have printed them in one color. Alternatively, you can do it in the color of the tokens. For version 1 Print the tokens to 98% and they…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Print with solid infill. The thermometer applies some force on the holder, so I printed with PETG. It works good. The design is focused…
Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Has a bit tilted nose 15° for a more secure hold. Uses universal hook to mount.
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You! Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon…
Dirt guards for the ARRMA Infraction. You lose 2mm of travel and can put a 2mm spacer on the shock shaft to limit it if you want. No supports required. You will have to mirror the parts in your slicer to print the right side.
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
This is a suit of armor befitting the esteemed Flipper Zero IR Blaster, forged by the renowned Rabbit-Labs. Armed with seven luminous hyperintensity LED emitters, this apparatus harnesses the power of infrared transmissions to command the…
Simple mount to keep the Thermometer secure and in one place
holder for Infrared Thermometer for the Honeycombstoragewall.
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
Remix for small holder for Infrared Thermometer for the Ikea Skadis board and Küpper EU board to fit thermometers with Ø17mm opening. Print with 100% infill.
Turn-Table Any self-respecting railroad needs a turntable for obvious reasons. This turntable can be used as a center of a roundhouse (more about this later) or as a center switch for multiple track paths. The basement layout used the…
Simple pegboard holder for infrared thermometer. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
This mount is for the SkyRC GNSS rear shock tower mount. It allows you to run the mount backwords and have it put between the rear diffuser mounts to keep CG as low as possible for speed runs.
This is a pegboard mount for my infrared temperature gun. I wanted a pegboard mount that didn't take up too much space and that looked nice, which seemed tricky for the temperature gun design, so I came up with this and am quite pleased…
A remix of a Mainframe z16 model in Fashion scale/Barbie 1:6 size with scaling at 327.84%. Size (HxWxD) approx. 35,6cm x 11,4cm x 22,2cm Remix differences The model is cut into 4 pieces with assembly joints for M3 threaded inserts The…
Rear wheel well fully redesigned from new sketches to match side skirt mounting holes on original design. More strength, and allows more room fore and aft of the tire to prevent rubbing. Front deflector includes additional mounting point…
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…
I'm in the process building FreddyZ 's amazing Antikythera Mechanism , and I realized that the countersinks on the bottom of the mainframe are on the wrong side. Several people in the comments noticed this as well. This model moves them…
A simple holder for Multiboard. Uses the big snap, so no additional snaps needed. Print with 0.2 mm layer height and supports.
I adjusted it to fit a 14mm thermometer. And also made a hole in the middle to save filament
Ständer Infrarotheizung für 18mm Rahmen. Einfach die Infrarotheizung in die Ständer schieben (kein kleben, oder Anschrauben nötig).
This mount for the Armma Infraction puts the SkyRC GSM020 GPS on the outside of your truck where you can see it. It will sit horizontal with no angle and is held down by 3 zip ties per side and one on cross brace so it won't slide down.…
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Simple housing for a KY-022 Infrared Receiver Module The hole for the actual receiver is 9x9mm This was modeled off a module measuring 15.4 x 24.18 x 15.69mm. (This includes the pins and receiver) Print Settings Printer Brand: Creality…
Slight adjustments for the Mestek Thermometer.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Support needed! I used 4 walls for stability. PLA worked…
Remix to support 20mm IR Thermometer openings.
This pin boot cover is made to fit my Flipper Zero Infrared (IR) Blaster case found at the following locations: https://www.printables.com/model/606855 https://www.thingiverse.com/thing:6106025…
A 4x3x7 gridfinity bin which has a carve out for a Wintact Infrared Thermometer from Amazon ( https://amzn.eu/d/fVUWYlg ). The model is multi-color printable. I actually ment the ‘red’ to be red, but due to a lack of red filament I chose…
Instantly boost your COBOL skills and save the department of labor by turning your Raspberry Pi 3 into a mainframe!! Show all your fellow cobalt-colleagues what you are made of by hacking directly into the mainframe from home. Do not…
small mount for sensor Category: 3D Printing
This is a remix to allow mounting the GPS with just Velcro or another similar material instead of clips. Cutouts are on both sides to allow easy removal, and it's also possible to charge the GPS with a low profile USB-C cable. Print…
Atomstack R30 infrared laser module model
Accuracy of reproduction +-0,2mm except overall dimensions, which are accurate to the specs. Please note that this camera has manual focus lens with screw ring - 1mm adjustment during use (from 23.8mm to 22.8mm overall length). If you…
I wanted to store an etekcity infrared thermometer, but i don't cad so well. I made a rectangular hole and plopped the thermometer in it. (its model is lasergrip 774).
A 14mm infrared thermometer holder for my Ryobi Thermometer. Designed from scratch to match the Honeycomb Designed and be easy to print but heavily inspired by…
Quick remix of https://www.thingiverse.com/thing:3298390 No supports are needed for pegboard hooks with this design. To achieve this I've simply performed Z height cut. By doing so overall z height has been reduced. Pros - no supports,…
This design was created to accompany my video series on using Magiquest magic wands to control smart home automations, but this case could be used in any application where you need to add an infrared sensor to a D1 mini or D1 mini clone.…
Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
This front panel design blends biomimicry with functional engineering, inspired by leaf venation and branching patterns. Its organic cutouts enhance airflow while offering a visually expressive centerpiece for the MasterFrame 600.…
Print it standing up, supporless. mount with stickytape at an angle. The thermometer should be laid in a bit.
I designed this printable storage box specifically to store the xTool Infrared Laser Module from my D1 Pro laser engraver. I used the foam from the xTool original shipping box to line the inner walls of my printed box. This was designed…
Modelled at full scale - ready for you to scale to the needs of your layout. Image credits: Infrabel Print Settings Printer Brand: Creality Printer: LD-001 Rafts: Doesn't Matter Supports: Yes Resolution: 0.02 Filament: Anycubic Standard…
This is a bracket to attach an InfiRay Xinfrared T2 Pro thermal camera to a pan-tilt light. The purpose is to create a thermal camera turret that can be used on vehicles for spotting wildlife at night. This is meant to be used with 3mm…
This document describes the design and functionality of a bespoke enclosure crafted to house a Raspberry Pi Zero and a Waveshare infrared camera. This enclosure is specifically engineered for attachment via zip ties to a dog's crate,…
A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…
A mount to fit onto the 'standard' 2WD Chassis Kit seen on Amazon, AliExpress, etc. to be able to mount 2 - 4 Infrared FC 51 sensors. Uses M3 screws to mount to the chassis and the infrared modules Category: Robotics
DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs…
Remixed Nicorn's design with standard pegboard spacing (25mm). Pegboard part by my bestest buddy Angus! Category: 3D Printer Accessories
Smartmeter infrared read/write sensor case for various smart energy meters used in germany. Parts list: Threaded inserts and M3 screws (2pcs) 5mm Neodymium Magnets (6pcs)
Didn't like the fan mount clamping onto the motor so created this fan mount for 40mm fans. Added a compartment for an airtag incase it goes flying into the weeds. I used longer 4xM3 (20mm but I have to cut it shorter) and M3 washer and…
This is a custom IKEA Skadis holder I designed for my no-name infrared thermometer, since none of the existing ones on Printables fit properly. The mount holds the thermometer securely while keeping it easy to grab when needed. The design…
This is a "case" for a battery-powered infrared thermometer with a laser pointer built with a Wemos D1 Mini ESP8266 microcontroller and an MLX90614 sensor. By its data sheet this sensor has high accuracy of 0.5°C over the 0 … +50°C…
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
Multiboard Mount for Parkside Infrared Thermometer A compact and practical wall holder designed for the Parkside non-contact infrared thermometer. It’s made to fit perfectly on Multiboard systems and keeps your tool always ready for use.…
Wall mount for Infrared Temp Gun. Holds 2 AAA batterys so not to corroded in gun. works on: menards 84850 Benetech GM321 XRCLIF 520E harbor freight general IRT207
I wanted to protect the device from all the other stuff in my toolbox so I made this. It has an optional lid and spots to store two 9 volt replacement batteries from the device. I made mine out of ABS but I'm sure other materials will…
Use hotglue to stick and stabilized the ir module
Cradle for the iHealth digital thermometer. Probably fits many other brands. They all seem to have a common shape. We have to use ours daily for daycare. Makes it a little cleaner since we keep it on the countertop.
Pegboard Infrared holder for Mastercraft model Maximum 201610. This is for the north American 1" spaced pegboard. Print upside down with supports from table. Nozzle .4 Resolution .2 Hot end 210 Bed 60 Supports yes (from bed)
oleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
Using FlySky FTr10 twin antenna with my Arrma Infraction for range purposes. Needed a good way to mount the receiver and antenna. I removed the rear brake assembly already so there's room to create a platform to mount the receiver. It…
Couldn't find a pegboard holder for my infrared thermometer so I made one in Tinkercad. Fits a standard pegboard 25mm. Printed with supports everywhere for the pegs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Changed the to match the Mainframe z16 - 5 part model The remix contains the following changes: The bottom 1mm has been cut off The scale has been changed to 59.25% to match a y-height of 10mm The scale has been changed to 93.33% to match…
Wall mounting of my infrared thermometer holder
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
⚠ Requires additional parts for full functionality, sold separately. 🛠 This model is a remix of IBM's publicly available z17 design, and the additional parts (lid, backplate, powerbutton and stand) are original designs created by me,…
Simple Holder for LOMVUM infrared thermometer. Could be mounted by double side tape or two M3 screws. Print Settings Printer: Haribo Rafts: No Supports: No Infill: 20% Category: Tool Holders & Boxes
It is a non-contact thermometer that works with Arduino Nano and GY906 sensor and can measure and record temperatures. The model is completely in draft condition, with serious shortcomings. I have archived it for future reference. This…
INFRARED THERMOMETER - MAGNETIC HOLDER Keep your thermometer in the most handy place! Features Place on Refrigerator and use it for cooking. Stick it to your tool chest! Stick it to your auto (careful) Easy to assemble Easy to print - No…
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…
Remix to support 16mm to 18mm IR Thermometer openings. I make it in two parts. The first is printed in PLA and the second in TPU I glue them together…
This is the Open Source version of the E-by-J Infrared Camera. This is a complex DIY project that requires exact electronic components, wiring, and setup commands. Note that throughout much of 2020, the increased demand for thermal…
My take on a Skadis infrared thermometer holder
Now you can also add a z16 logo on your Mainframe z16 3D printet model 🚨 Important info before you take on this model 🚨 This is a two color print with manual color change Use the Part 8 Sticker Applicator Tool to place the z16 logo…
I needed a project box for my combo IR Transceiver and Micro USB board. A few hours and a lot of test prints later and here it is! Hope you like it. Nice and compact. Printed in Polymaker PolyLite Clear PETG so I wouldn't need any…
a rally front spliter for the arrma infraction 3s / mega Category: R/C Vehicles
Self retaining dust cover for Parkside PTI 380 C2 Infrared Themometer. Your printer should be well calibrated in order for the dimensions to fit correctly.
I have a completely enclosed Ender 5 S1 (Creality official enclosure parts) running Klipper off a Pi 3. It is dark in there for a camera, and there are few useful mounting points to see the first layer without interfering with moving bits…
I wanted a way to mount my Bittydesign AR8-GT3 body on my Arrma Infraction without horrid body clips, so I designed a magnetic body mounting system that works perfectly. The front of the body is held very securely by 8 10lb magnets (4 in…
I didn't like any of the cases available for the IR Toy v2 which I was able to find on Thingyverse, so I went ahead and created my own case. The advantages of this compared to others is that it is not oversized, allows good IR reception,…
Skadis board Mestek Infrared Thermometer holder, the original file had a smaller shaft, which caused my thermometer to fall down from the board. if you do want to support me feel free to donate a cup of coffee
Infrabel Tracklevel Crossing Concrete Slab. As specified by the Belgian railway network maintainer. Serves to safely cross tracks without walking on ballast or sleepers. Modelled at full scale - ready for you to scale to the needs of your…
This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…
Angled support for a garage door infrared barrier ( ABO-20L ) Category: Other
The original design was superior to most other models as it takes up less space on the Skadis board and has the handle out for easy grabbing. However, it was for one specific brand/model of thermometer gun and didn't work with mine, a…
Da die standartmäßig anzubringenden Rollfüße der Könighaus Infrarotheizung sich bei jedem kleinsten hin und her Bewegung automatisch verabschiedeten habe ich als Ersatz diesen Standfuß designed in dessen mittiger Öffnung sich die Heizung…
A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…
Here is my attempt at replicating the pushbutton insert for the IBM SYSTEM/360 and System/370 mainframe computers that were popular during the mid-1960s to late 1970s. These machines had operator consoles with numerous switches, lights…
DOES NOT WORK STABLE TROUGH GLASS YET, DO NOT USE IT, JUST FOR TESTING. (Maybe it is working with an aluminium surface.) 2016.09.30. With this position I can't setup it correctly :( Feel free to post your idea. At the first place where I…
Infrabel Mod. 95-96 Concrete Platform step. As specified by the Belgian railway network maintainer for all new station platforms and upgrades. Serves as access from platform level tot track formation. Modelled at full scale - ready for…
Etui pour ran gement Laser Infrarouge Atomstack P1
The remote control box for the infrared heater, made in such a way that it can be stuck on the wall under the heater and can be operated by pressing the buttons directly on the wall. Fits exactly on the remote control for the Cattara…
