1,137 models
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…
Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant
I'm not 100% sure which Gopros and Cases fits. I only tested it with the Gopro 10. Fits only the normal lens, not the Max Lens Mod. Changes to v3: Since some have complained about the somewhat tight fit, I have added three different…
Print approx. €7.86–€9.60 excl. taxPreliminary estimate for one variant
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
Print approx. €7.07–€8.64 excl. taxPreliminary estimate for one variant
Simple clamp with decorative low-poly inlay. Single or dual color options.
Print approx. €7.76–€9.48 excl. taxPreliminary estimate for one variant
Nach gut 20 Jahren sind mehrere der Einlauftrichter meiner Rolladen gebrochen, da das Plastik langsam porös wurde. Da ich den Hersteller und das Modell nicht mehr herrausfinden kann, habe ich das Teil kurzerhand selbst Modelliert. Das…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to x13a for the original model. Mainly i remixed the model to add 4 microSD Slots and to get the GoPro to fit in with this lens cap on.
Print approx. €9.58–€11.71 excl. taxPreliminary estimate for one variant
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M12 DC 5V NPN NO LJ12A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This is a large turning knob designed for heavy use in woodworking jigs and similar applications. It contains a M8 metal nut inside to make a very rigid thread. Outer diameter is 60mm. I recommend using "Prusa Control" Slicer for easy…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
“Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer.” STL…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This is remixed from _endrift's Nintendo Switch game case on Thingiverse . Same great case, but with a graphic on the front! This case for Nintendo Switch game cards is well-designed, and convenient to customize in openSCAD. But it was…
Print approx. €3.97–€4.86 excl. taxPreliminary estimate for one variant
Die Schalen wurden passend für die Ikea Alex Schubladen erstellt und das sie kompatibel mit dem sliding-tray sind https://www.printables.com/de/model/886260-sliding-tray-for-ikea-alex-drawer
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
It is an Inlay for the Filament Guide from Prusa Research to insert PTFE 4mm into the Holder. Printed on: Original MK3S+ Filament: Prusament PETG Prusa Orange
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer. 100.65…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
for english please scroll down → für deutsch … hier lesen: Die Spieleschmiede brachte 2023 das Spiel Dungeon Drop inklusive Erweiterung Dropped Too Deep und andere mit dem Verlag Mirakulus heraus. Für diese Spielschachteln sind das die…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Ein Inlay für alle Teile des Grundspiels und der Erweiterungen Wanderer und Druiden. Passend für die deutsche Version von Lookout Spiele (ev. auch für andere Versionen). Das Drucken funktioniert ohne Stützen. Anleitung für das Drucken des…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
McLaren F1 team logo, printed with MMU3 and MK4 using texture sheet and the following rolls setting: Roll 1 - black Roll 3 - white Roll 4 - orange Total thickness is 1.6 mm and black and orange are 0.6mm inside.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Simple inlay to keep using the original TinySA Ultra box to store it in. Update 2024-09-10: added 5mm offset top insert, so you can keep your sma adapter attached.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
If you shop at Microcenter like I do, these are a nice addition to help your cardboard spools spin. (Can Possibly Fit Other Spools) Print Settings: Layer Height: .2mm Walls: 3 Top/Bottom Layers: 4 Infill: 10% (no need for more) Supports:…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
The model is quite self explaining. Print it, insert it into the original card game box. the tolerances for the cards are rather tight. Model file was created with Autodesk Inventor 2024.
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Die schmalen energy drink Dosen neigen bei unserem Ford Smax leider immer zum umkippen, da die recht groß dimensionierten Getränkehalter für kleiner Dosen nicht wirklich geeignet sind. Also habe ich Maß genommen und eine Art Reduzierhülse…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Inlay für Kronkorken um einen 8x3mm Neodym Magnet wir z.B.hier: https://amzn.to/2FPV8sI anzubringen. Kann als Pinnwandmagnet oder für Kühlschränke verwendet werden ;) Print instructions Category: Organization Print Settings Printer Brand:…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I frequently get my filament from a Microcenter, and they sell spool-less filament for a little cheaper. I wanted to print a spool for the roll of cardboard cylinders to fit on, but the ones I found were too big. After taking inspiration…
Print approx. €5.92–€7.23 excl. taxPreliminary estimate for one variant
A simple geometric vase with a twist - literally and figuratively. The vase features a 7 path inlay for 1.75mm filament. Mix and match to create your masterpiece. Perfect for living rooms, wedding centerpieces, gift, etc. Optimized to fit…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for one variant
Caverna is an excelent Board Game. This print will help with organizing both in storage and playing the Game. If you want to make a remix, feel free to use the enclosed Fusion 360 files. *.f3d Print instructions STL-files needs to be cut,…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Hi everyone, just use standard PLA - no need for PETG or more expensive filaments. This is the routerbit set, which it is designed for: https://www.bosch-professional.com/de/de/sets-fuer-verschiedene-anwendungen-15-teilig-2867965-ocs-ac/
Print approx. €5.88–€7.18 excl. taxPreliminary estimate for one variant
This model provides a fully parametric SCAD design for creating a drawer grid inlay that allows you to reuse the inserts from Raaco Assorter 55 boxes in a drawer setup. By leveraging this design, you can repurpose your Raaco inserts…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Prusament boxes happen to be a good size to store tea in. Here is an inlay to sort the tea bags. There are variants with 3, 6 and 9 compartments, with and without base, high and low walls. These are each designed to be printed in…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Inlay for screw measuring tool https://www.printables.com/de/model/32160-screw-measuring-tool-m2-m10-4-120mm Fits into the slot for the length indicator for better visibility and less dirt inside the slots. The thickness should be 0,4mm,…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Stanley sorting box inlays for small parts in different sizes. I use a lot of these Stanley sorting boxes . For most parts they work quiet good and their dividers often work well, but not for small and thin parts, like washers… They…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Hi everybody, instead of ordering the original inlay by Bosch, I decided to print my own design. It fits nicely in a L-BOXX 136 G4 (didn't test the ‘not Bosch ones’). There is place for the Bosch Impact Bit set case, for one battery pack…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
2 Inlays, um den Raum in der Mittelarmlehne besser nutzen zu können. Die untere Ablage hat Fächer für eine Parfümflasche o.ä. mit einem Maximaldurchmesser von 56mm kleinen Schreibblock Stift meinen Airbag-Schlüssel ( Link ) einen AirTag…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for PETGSource material: PET
Due to local availability, I get a lot of Inland brand filament. Other times I'm using Prusament. Because of the winding direction of the Inland spools, the recessed end of the spool is on the wrong side for the RepWinder 15mm spacer.…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to minimize the time and filament needed to print the Spade wood drill guide by Smoluch . So I created disc inlays that you can put in the largest drill guide instead of printing separate drill guides for each drill size. I also…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Inlays made making a picture frame out of a Pimoroni Inky Impression 7.3" (2025 edition), an IKEA Rödalm 13x18 cm and a Raspberry Pi Zero 2W. This is what I used to make a small display that we had at the Codeberg stand at FOSDEM 2026 as…
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant
I made a small Token and Dice Tray for the Street Masers Rise of Kingdoms Edition. it fits in the Original Tray. i made the Dice Tray for 16 Dice because, i have an extra pack of Dice. And a Boss Base, so you know who is the boss ;) Added…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
This is an inlay for the produce tray of the fridge. The small offset allows moisture to collect at the bottom of the tray. The accumulated water can then easily be removed, preventing the vegetables from getting moldy. Suggested…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for PETGSource material: PET
EN: Use gives you ideas on how to improve that item. I have therefore designed a replaceable inlay to protect the drip tray and remove stubborn adhesive residues with little effort and only a small amount on materials (avoiding reprinting…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
I've uploaded solid bodies and already enveloped files. Layer height can be freely selected. If the tolerances are too tight, I can make them larger, just let me know! I've added 4 Inlays to make the vase more stable. I've printed my vase…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
Case Inlay for GoPro Travel Kit 2.0 (https://gopro.com/en/us/shop/mounts-accessories/travel-kit/AKTTR-002.html). For dimensions of the inlay, please check the drawing. I designed it for my needs, the inlay can handle one gopro hero 11…
Print approx. €11.86–€14.49 excl. taxPreliminary estimate for one variant
Fasseinlauf um das Wasser aus einer Regenrohrklappe mit weniger Spritzen in die Tonne einzuleiten. Alle Teile habe ich mit Support gedruckt. Die Mutter lässt sich nur von einer Seite leichtgängig auf die Deckeldurchführung drehen. Man…
Print approx. €36.24–€44.29 excl. taxPreliminary estimate for PETGSource material: PET
Prevents the rubber from moving backwards when the urinal is pushed on.
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
This is an Organizer for the Inside of Kosmos Card Game Boxes to keep the cards in place. It has two slots for regular playing cards and a bigger slot for miscellaneous accessories. Layer Height: 0.2 mm No Supports Printed in DAS Filament…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Eine dreiteilige Einlage mit Durchmesser 30cm. Ich nutze Sie um mein Filament trocken zu lagern. Einfach etwas SilicaGel in den Eimer, und Einlage mit dazu. So liegen die Filamentspulen nicht direkt auf den SilicaGelKugeln. Damit erreiche…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
NOTICE: INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…
case inlay for GoPro hero 8/9/10/11/12. This model is made for GoPro.
there is enough space that you can put a Lens Cap on the GoPro (like this one Simon Pratt's Lens Cap ) Case Inlay 1xGopro: 1x GroPro Hero 9, 10, 11 4x microSD 1x SD to microSD adapter 1x GoPro dual charger (opening for USB-C charging…
For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…
Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the…
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
A friend wanted this for his workshop so we designed it better for what he needs. We used the space better by adding three sizes and some optional mounting holes. He also wanted the inverse of the cutouts. I will include the blender file…
This is a system to organize your drawer or replace an existing drawer inlay. It uses a grid of 40x80mm, so you can combine any length and width. I have designed two different hights - 60mm and 80mm To keep the boxes in place, use the…
Sunflower Windmill inlay cover I get some request for a single color opportunity of my Sunflower Windmill . I came up with this easy solution. Just print the cover inlay in black and press / glue it into the yellow printed sunflower…
I needed a box with an inlay. And so i decided to upgrade the box from whity . Now you can change the amount of dividers in the parameter menu Changes are made by the division_length resp. division_width
🇫🇮 Tervetuloa Helsinkiin! Welcome to Finland! This model was designed by Dany Sánchez with optimizations by Jukka Seppänen @kijaidesign . The idea of MiniWorld3D came to creator Dany Sánchez after a Finnish friend who asked if 3D printing…
The outline template for XTOOL creative space is also available
A modern and sophisticated designed dish for soaps with an integrated grate to collect dripping water. The standard dimensions are 175 mm x 110 mm x 20 mm . Printed with the following settings: Layer Height - 0.2 Walls - 2 Infill - 15% 🚀…
Terraforming Mars Inlays have been done by the dozen - personally, I moved away from the classic components so much that none of them would be helpful. So I decided to create a premium inlay for the following content: Terraforming Mars…
Inlay to insert into the handle recess for everyone without MMU (like me), but still want the handle in another cool color. Simply print the additional part in the desired color and insert it into the handle.
Just a quick enclosure I made for this Inland SSD I wanted to put in an ITX case and take up a little bit less room. Not sure what other SSDs it would work with. Maybe someone will find use for it.
After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Customize your poker suitcase inlays with a card (and dealer / blind chip holder) plus poker racks as base and lid, so you can use both of them for playing. OpenSCAD-Files: Customizable Chip Rack including these parameters: Chip Diameter…
Are you tired of searching for a Monopoly tray insert that actually fits the standard Monopoly set with its original cardboard inlay? After trying many designs, I couldn’t find one that worked with the dimensions of my Monopoly set.…
Insert for IKEA Skadis tray to store sewing machine needle boxes. I tested with "Schmetz", "ORGAN" and "akra". Others should also fit. I was inspired by the model of @TomDoe, but I designed it from scratch in a completely new and…
To the last vacation I wanted to take all my Nintendo Switch games with me, but not all of the cases. That's where I came up with the idea, nothing special but easy and quick to print. So all games have their place, I hope you like it. In…
Description An universal set of crates of several sizes. These can be stacked together and have slots to add signs to know, whats inside. Signs can either printed from the included files or added with handwritten paper with 29mm width and…
Reloadable master spool with 90mm center hub and 60mm flange spacing. This spool design appealed to me because it was threaded and used less filament than other reloadable spool designs I saw. When I printed it out as-is, I discovered…
Fits Inland spoolless filament snugly without slipping. Width has also been adjusted to match inland sizes This is the version with the locking mechanism that works in Bambu AMS without unraveling I printed it with 0.2mm layer height, no…
Texture rolling pin for clays and epoxies. Can be used to create a pattern similar to tile with a fancy diamond inlay pattern. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking,…
**NEW** : The Universal Ring works on ALL Inland cardboard spools, but the AMS will not operate properly unless it is propped open and resting on its locking tabs. Instructions for using Universal Ring: 1) Align long oval in the Universal…
Letters have a 0.1mm kerf from the original LCD Cover design file and are 0.6mm thick these can be glued inside the cutout logo on the LC Cover as shown on the picture
Inspiration for this vase collection came from drodfro's “Filament Beer Pint Vase”. Multiple sizes of slim and wide body vases are provided in this collection. You can choose between vase mode and regular printing mode. The neat part…
Einfache Muldeneinlagen für Bohrer und Fräser in Schubladen. Simple trays for Drills and Milling Cutters in Drawers.
Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.
Made a simple coin/key tray for my Ridge wallet, but I also tested it with 2 other slot type card wallets, one with friction fit and one with a slide out lever and it works with all of them :) It's about the same dimensions as the…
Das Insert ersetzt alle in der Spielbox gelieferten Inlays. Es passen alle Acrylteile + Playmat rein. Kein Lidlift/Deckel schließt komplett. Die Playmat muss relativ straff zusammen gerollt werden, dass sie in “Layer 3” passt. Drucker:…
This is a set of 2 router templates for a bowtie inlay or bowtie joint : 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif) 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie…
This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…
A tray insert to hold packages of sewing needles of the german company "Schmetz", maybe fits other companys as well.
I have done my best to replicate the inlay of the armrest of my Skoda Karoq as faithfully as possible. In addition, the diameter of the front cup holder has been increased to 75mm so that thermos cups can also be placed. Two models are…
Fits nicely inside the box and helps you to organize all the tiny things of the game so you can start the game faster. The magic and flames holder can also be used during the game of course. I also designed some feet for the figurines as…
I remixed the original model to include the Chevrolet logo as an Inlay.
Since I was not really satisfied with the existing Skadis Gridfinity solutions and had plenty of these original IKEA Skadis trays laying around, I figured why not reuse them. They fit a 2x6 baseplate just perfectly. I added two magnet…
This is an inlay/organizer for the board game Lacrimosa by Devir Games. This inlay is heavily inspired by the one by silfire , however I didn't like the hard edges and wanted a different design for some of the boxes. The player tray…
Print the pieces and glue together. I haven't messed around too much with it but it did require a little sanding so maybe the shell could be ever so slightly larger.
Aus der Reihe “Ordnung ist das halbe Leben” hier einige Inlays für die IKEA Alex Schubladen. Gedruckt in PLA mit einem CR-10 Smart Pro und 0.6 Düse (0.4 geht auch, dauert aber deutlich länger) Die kleinen Füße (einfach duplizieren auf…
This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…
Basierend auf dem Vorbild der Aufbewahrungsbox von @Hugo habe ich Inlays entworfen. Für die 3er Version Box 180x60x25 Für die 6er Version Box 180x120x25 Die 3er Version wurde bereits überarbeitet.auf den Fotos ist die V1 zu sehen. Update…
I made this inlay because I liked the format of the Systainer3 S76’s and the OCD in me wanted to create cutouts for all my tools. I couldn’t find any template cutouts that covered most of the nooks and crannies of the Systainers which is…
This is an inlay for the Fortnite loot chest created by Blecheimer . The 30mm version, like in the picture, the cartridges are easier to be removed only the lid can't be closed. The 20mm version the cartridges are lower in the chest and…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/190120 The print settings in the print profiles have been tested. PLA prints in 16 minutes & PETG in 18 minutes. ==== Protect…
Add this D&D inlay to any project. Fun little print, comes out looking great.
TPE-83a eSun Layer High 0.2 Layer Widht 0.4 Temp 240 Speed 20mms Ready in 7 Min
I remixed a supportless box and created/designed the inlay myself.
FULL CREDIT TO MakeALot ON THINGIVERSE. UPLOADING HERE TO SHARE WITH THIS COMMUNITY. Summary A circular trinket/present box with the words "I LOVE YOU" embossed in the style of Morris/Goudy around the outside. There is a plain lid, or if…
