2,644 models
The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for PETGSource material: PET
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for one variant
Trash can to install in any can holder of any size. There are several sizes available to choose the one that best suits your needs, is not the one you want? Let me know in the comments and I'll be happy to prepare a new size for you. Did…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
It would be nice if you post your make. Thank you
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
My second attempt at this model, based on input from other hobbyists. The added protractor is by Joaelso. https://www.printables.com/model/171880-winkelmesser-protractor The M4 knob is by StriK3FoRC3 from…
Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant
This is a stop block that works great for standard size t-track! Currently a work in progress, but I am happy with it so far! I designed this to work with Powertec or Rockler t-track, but it should work with most standard size t track.…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
Create a cyclone in two two liter water bottle.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
english We had a “FRZ”-Ladder in our household where the rubber boot fell apart because of their age. The plastic was very brittle and unfortunately there are no spare parts available because the company that produced these ladders most…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Dies sind zwei sehr stabile Halterungen, um eine Leiter an der Wand aufzuhängen. Eine Halterung ist innen ca. 120mm, die andere 140mm lang. Die Befestigungsbohrungen sind ausgelegt für 4mm Senkkopfschrauben. Translation: DeepL These are…
Print approx. €5.95–€7.28 excl. taxPreliminary estimate for PETGSource material: PET
The model guides saw blades along two sides, which are designed to hold magnets with a diameter of 8mm and 3mm depth. The holes have a tight fit, if it comes to loose, the magnets can also be glued in place. It has a grove which can be…
Print approx. €5.50–€6.73 excl. taxPreliminary estimate for PETGSource material: PET
Need 3pcs screw 3x20 You can speed up print up to 150% on MK3s
Print approx. €5.58–€6.81 excl. taxPreliminary estimate for PETGSource material: PET
Uploaded V2 - better tolerances all around, and significantly shortened the overall length to cut down on plastic A ¾" schedule 40 PVC pipe-coupling that adds a 2 liter soda-bottle (standard US-threads). I created this as a cheap way to…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for PETGSource material: PET
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Printed with PET-G. I used 4 perimeter and 25% of gyroid infill. works fine, but no warranty in case of accidents!
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
This jig helps to clamp and glue miters at different angles (not only 45° angles). You need three clamps and two jigs to apply the jigs to one corner/miter. To prevent from slipping while clamping, I recommend to apply sand paper with…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
I printed this Miter Clamping Tool with Fuzzy Skin on the outside in Prusaslicer. This gives the clamping tool more friction on the surface of the wood. You could also glue a piece of sandpaper to the clamp to add more "sticktion". I…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
This adapter adapts the Ryobi 10 inch One+ Miter Saw (P3650) dust collector output to the Ryobi 6 Gallon Wet/Dry One+ Vacuum (P770ID). It may very well work for other miter saws and/or shop vacs but these are the ones I own, designed for,…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
These are miter guides for setting your table saw miter gauge for making n-sided cuts. For example, if you want to make an 8 sided object, you would use this guide to set the angle on your table saw miter gauge so that the angles are set…
Print approx. €7.25–€8.87 excl. taxPreliminary estimate for one variant
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
A wallholder for a ladder
Print approx. €22.51–€27.52 excl. taxPreliminary estimate for PETGSource material: PET
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
ZUm Zusammenbau werden M6 er Schrauben benötigt. Sehr stabile Konstruktion.
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
The stock limiter that comes with the RIA VR60/VR80 9rd shotgun magazine is designed to only allow 9 shotgun shells maximum. However, if you reduce the size of that limiter you can actually squeeze a 10th shell in the magazine. So I give…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
einfach aber nützlich , zweite spulenhalterung für Ender 3 V2 (gegenstück zum aufstecken/erweitern) des originalen Spulenhalter! --->ACHTUNG Original wird benötigt ! <----- Simple but useful, second spool holder for Ender 3 V2…
Print approx. €1.71–€2.10 excl. taxPreliminary estimate for one variant
Pieza de repuesto para gancho de mosquitera. Print settings for my Kobra 2 Neo: Layer height: 0.1 Print velocity: 10mm/s or 20mm/s
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model provides a replacement for a broken or missing motor cover on a Delta Compound Miter Saw. It works on model 36-075 and possibly others with similar shaped motor. I own this miter saw, and many years ago I broke off the plastic…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
I saw the idea for this on Instructables by Workshop Edits, but that version had some improvements needed. To explain what this does: when you need to make repeated cuts using the miter gauge (cross cuts) on your table saw, you could…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This file only contains the number row keys and doesn't currently include the backspace. I do have plans to eventually put together a full set of keycaps, but learning everything all at once (3D printing, drafting, outputting files,…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
For best results, print solid or with 5 perimeters with ASA. It works good in PETG as well, but ASA has a higher modulus and fares better in the frequent outdoor sunlight due to its good UV resistance. (if it is not constantly in…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
A removable bracket or the Pegasus Pocket Powerbox (PPB) Micro that clips onto a 1.75 tripod tube The tube clip is just pushed onto the tube and also has a bolt and heated insert to secure further. The PPB is attached to a bracket via two…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
I am of the “keep everything off the OTA” camp vs. “put everything on the OTA but the kitchen sink” camp. With that in mind I designed and printed the models you see on this page. I share the mele with a “permanent” iOptron 360 tri-pier…
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for PETGSource material: PET
Deckeleinsatz für Spaghetti-Eisbecher von Edeka, Aldi oder Lidl. Senkt den Verbrauch von Reiniger bei kleinen Teilen. Das Gerät mit Wasser wie gewohnt auffüllen und dann die Reinigungsmischung nur in den Becher füllen. Für Vevor JPS-10A…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for PETGSource material: PET
This handle extension allows for an upright posture while pulling the compressor behind you. The handle was printed with PETG and consists of four parts that are joined together using M4 screws and nuts.
Print approx. €14.30–€17.48 excl. taxPreliminary estimate for PETGSource material: PET
Toller Aufsatz zum tropffreien Ausschenken aus einer Metrox oder Benta 2 Liter Milchkanne. In den Deckel für den Ausguss passt ein Gummi-O-Ring 31.34mm x 3.52mm, den man im Baumarkt im Sanitärbereich kaufen kann. Ich empfehle, mit ABS-X…
Print approx. €3.94–€4.81 excl. taxPreliminary estimate for one variant
100x160mm sign, to let the world know your interociter is operational and available. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
Der Aufsteller kann in einem Schritt gedruckt werden, es ist kein Zusammenbau nötig. Lediglich nach zwei Schichten (0,3mm) muss man das Filament von Rot zu Weiß wechseln. Die bereitgestellten 3MF- und GCODE-Dateien haben den Farbwechsel…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Limiter for bread box
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
This limits how far my refrigerator door can swing open, preventing it from hitting a newel post. This is made specifically for my GE ENERGY STAR 21 Cu. Ft. Fingerprint Resistant Stainless Steel Bottom Freezer Refrigerator - GDE21EYKFSS
Print approx. €8.84–€10.80 excl. taxPreliminary estimate for one variant
What This Is A compact (~21L) PC chassis designed to fit a standard full-size ATX motherboard and ATX power supply, split up so can be printed on the Prusa CORE One. The motherboard sits on truss frame for airflow. The power supply hangs…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
The mockup available only has the external shell and lacks any of the gearbox elements that would allow interesting repacks to be designed like what has been done for Sherpa mini and HGX extruders. I completed the CAD based on…
This mod comprises 2 parts, the Orbiter v2.0 Mount and a slightly revised StealthBurner Front Body. The front body has some clearance cutouts for the Orbiter filament tension lever and some extra cable management sections for the fans and…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Cobbled together in PrusaSlicer Jupiter with the socket, printed fine from my side and looks great. Will print fine in PLA, I used Eono White PLA in 0.2mm layer height. For the light use for best fitment a E14 bulb or a small E27, the…
Easy and fast to print in one piece. If you want to put stuff inside you can also print it in two pieces. The details make it nice to look at. Different versions and .step available if you want to modify it. Intended to be used as a 1:10…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. It's designed to be printed in ABS, as the little LDO motors get Hot, and to be attached via a Female-Female M3x15mm (if you have an OS2) or M3x20mm Hex…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
The biter from Factorio is ready for printing. It shares the same scale as all other official Factorio models. You can pick from four different poses. Variants with more complicated geometry are in two parts for easier support access.
3D Print Files for a miniature Arbiter! Supplied in 1:12 scale for FDM printing and 1:48 scale for SLA printing.
Easy one-handed pouring from your 2-liter bottle with this carafe-style screw top and handle. Use it for serving or as a watering jug for plants. The wide mouth also makes it easy to refill. Prints upside-down without supports. Fits…
The Biter Spawner from Factorio is ready for printing. It shares the same scale as all other official Factorio models.
* Update 23AUG2018 - I added a long version for people who have escaping wasps! The extra long cone is harder for them to escape from. This is especially true of smaller bottles. This is the model I now recommend. * * Update 18AUG2018 - I…
Erweiterbares Model von ikea Skadis. Durch eingeschränkte Druckgröße habe ich das Ikea Skadis als erweiterbares Model erstellt. Man kann den Skadis Organizer so lang wie man möchte machen. Benötigt mindestens jeweils 2 x Ecke 1 2 x Ecke 2…
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
Use 0.24mm layer height, 3 walls. A compact miter box designed for cutting small round rods, square strips, beams, dowels, and similar materials. The tool includes saw guide slots for: • 90° • 45° • 30° • 22.5° The 45°, 30°, and 22.5°…
English: Expandable pot lid holder. Each print is for 2 pot lids. There is a start piece ("Topfdeckelhalter_Anfangsstueck.stl"), a middle piece ("Topfdeckelhalter.stl") and an end piece Length: 131mm Width: 140mm Height: 100mm Towers…
Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…
(Keycaps for Cherry MX) If printing in the orientation that the file is originally in, supports may be necessary. Printing upside down should be the best way to print it. Dimensions of the entire file are 17.8x6.6cm which should fit on…
🇱🇧 اهلا بك في لبنان Welcome to Lebanon! This model was created by Dany Sánchez . This is available in two versions: Actual state (ruins) Hypothetical reconstruction (just this section, not the whole complex) The Temple of Jupiter situated…
Eine 3D-gedruckte Fliegenklatsche, die vollständig aus PLA (Polylactid) hergestellt wird, ist ein praktisches und umweltfreundliches Werkzeug zur Bekämpfung von Insekten. Sie wird mithilfe eines 3D-Druckers produziert und bietet die…
I really love that 3D printing lets us create tools and solutions for anything and everything! If you're making a full-size box or picture frame, you'd use a mitre box or something similar. Cutting angles precisely needs tools and jigs,…
I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.
Customizable miter box. The material size and angle of the cut can be customized. This was created in OpenSCAD. This was also created for the MTU MSE4777 class. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Scroll down to see the lates update. 24 of June 2025 thanks to our friend Alexandro now we have a new hotend supported. https://www.printables.com/model/1127748-phaetus-dragon-hotend-holder-for-xenomorph-by-cn3d Added the Extruder Sun…
Use 3 walls. A compact miter box designed for making accurate angle cuts on small materials and hobby projects. The guide features cutting slots for 90°, 45°, 30°, and 22.5° , making it ideal for precise and repeatable cuts. It works…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
Rogue Orbiter Tool Head design for the Ender 3 V2 Neo based on the E3D V6 mount (Revo Six, Dragon SF, HF, Dragonfly BMO) and the Orbiter v2.0 extruder. Battle tested and heavily iterated. This is my sixth complete Tool Head design for the…
Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
Voron Afterburner + Orbiter v1.5 + BLTouch for Anycubic Mega Zero & Ender 3 This is designed for use with an MGN12H Linear Rail on the X-axis. I made this compilation with modifications as most of the components I found had issues of some…
This is a modified print of the model posted at https://www.iter.org/newsline/-/3477 . The original model included files to print the entire model (complete 360°). The model required a printer with a print volume of 300mm x 300mm x 300mm,…
I found all the things I wanted in my Stealthburner to work with my ERCF and combined them to complete this. I have remixed all these parts to work with this setup. None of the original printed parts for the Stealthburner can be used. You…
***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…
Original model This support is to be used with my Space Shuttle . Dimensions et Informations Il fait environ 8 cm de haut pour 16 cm de large. Il y a 15 pièces à imprimer. Je l'ai imprimé en environ 4 heures. Conseils de Réglages Infill :…
Simple 45 degree and 90 degree miter box and handle for hacksaw blade. These were made when I first got into 3D printing and were created or modified in TinkerCAD. Original Knife handle is taken from…
This is a modified Orbiter 2 filament sensor body that is designed to be used with the ERCF system as an extruder sensor. It could also be used as an ordinary filament sensor, but the sensor the Orbiter creator built is great so I'd…
Spesification model : Gear type = miter gear Gear pitch = 16 Number of teeth = 16 Gear pitch diameter = 1" OD = 1.09" Overal width = 0.75" For shaft diameter = 3/8"
EBB36 Mount Orbiter v2 with PG7 Cable Gland -- Remixed from https://github.com/KayosMaker/CANboard_Mounts --
This project features a collection of small 3D-printed plates, each designed with various cutouts and practical templates: Geometric shapes (circle, square, hexagon, polygons, arrows…) Guides for drilling and drawing Stylized world map…
I designed this miter bar because the one included with the saw has too much play. The aluminium miter slot is 21mm (when new) but will wear down with use and it will wear more at the front than the back. Instructions: Print the test…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
Update: 11th Sep 2023 ** Bodies updated for less-shrink materials (Non-ASA/ABS) Update: 8th Apr 2023 ** LED Filament Sensor Cover updated for easy retraction Update: 15th Aug 2022 ** Extruder covers are updated for a better square nut…
Orbiter 2.0 is a great extruder and I have been using it on my Voron 0.1. Now V0.2 is out and I made a mod for it. There are many E3D Revo heater core failed, mine included. I keep using the Revo Voron heatsink but replaced the heater…
Originally published here: Jupiter scaled one in one billion by tato_713 - Thingiverse As well as my other post on gas giants, this is not a true relief of the surface of Jupiter, because it has not a solid surface, but it is instead a…
Simple water bowel for my pupper. I did have to heat the threads on the printed part and twist the bottle in and out a few times to get threads to work well. Printed 5 perimeters and 20 % infill.
Minershouse from the early 20th century from Alsdorf (Germany). The house was build for two families. It was constructed for H0-scale (1:87). Bergarbeiterhaus aus dem frühen 20. Jahrhundert aus Alsdorf (Rheinland). Das Haus wurde geplant…
Werkzeughalter zum einhängen in eine Hutschiene. Der Halter wird einfach in die Schiene eingehängt. Zwei Löcher für Schraubendreher, Aufnahme für Zangen und ein Fach für Aderendhülsen o.Ä. Dieser Halter hat nicht die gleiche Stärke wie…
Saw guide for accurate angle cutting (FreeCAD file attached). I printed with 0.6 mm nozzle, 4 walls and 50% Adaptive Cubic infill which resulted in relatively stiff walls when printing with PLA. Also I added a brim to reduce warping. This…
I modified the new mini stealth burner to work with the orbiter 2.0 as well as all the released tool head mounts to work with the changes I made. One of the heat set inserts is really close to the wall of the hotend adapter so i added a…
This model has been remixed to fit a Ridgid NXT 2.5" hose (2.25" OD at connector) to a DeWalt Sliding Compound Miter Saw - specifically model DWS780 but it will fit other models. Chamfers have been added to the vac locking mechanism and…
I just took this jupiter: https://www.thingiverse.com/thing:2747956 and fitted the threads into it that come with the *.f3d of the threaded insert. Also made it the same size as the moon. A PITA with Fusion360, quite simple with 3DBuilder.
Modularer Uhrenständer & Organizer – flexibel erweiterbar Ich habe einen modularen Uhrenständer konstruiert, der komplett selbst 3D-gedruckt werden kann. Das System ist flexibel aufgebaut und lässt sich passend zur eigenen Uhrensammlung…
Why? I simply couldn't find an EBB 36 adapter for the LDO Orbiter 2.0 on EVA 3.x, but there was that ingenious mount from @ianwlg so I had to remix it.. ;-) My version makes use of the gained space of the Orbiter 2.0 by moving the main…
Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…
Erweiterbares Model von ikea Skadis. Durch eingeschränkte Druckgröße habe ich das Ikea Skadis als erweiterbares Model erstellt. Dieses Model kann man in beide Richtungen erweitern. Benötigt mindestens jeweils 2 x Ecke blau 2 x Ecke grün 1…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
