Counting matching models…
This is 3D printable model of the Constitution Class NCC-1701 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. The ship is a hybrid of TOS and SNW…
This adorable seven piece set of dollhouse furniture is designed so that all pieces can be easily printed without supports , and then look sharp when used together. Included are several tables, chairs, and lamps which can be setup in…
I've created these furniture pieces for use in architectural models, dioramas, and more. They're designed at a 1:100 scale but can be easily scaled from your 3D slicing software as follows: For a 1:50 scale, use at 200%. For a 1:75 scale,…
Body hinge requires widening the hole to 10mm. Door hinge to 8mm. The screw spacing in the door plate is 45mm, and the offset relative to the box axis is 9mm. The screw spacing in the body plate is 32mm. The thickness of the tiles is…
Designed to print-in-place without support. 0.2mm layer height works well. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 3 parts in the slicer, with a separate lower insert. Tested…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
This is 3D printable model of the Neo Constitution Class NCC-1701-G Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. If you prefer this ship with its original name and registry of…
First a little explanation: Subitus means impromptu in Latin. Karambits are a type of Indonesian martial arts knife. Disclaimer: Karambits are very dangerous and (quality) utility knife blades are razor sharp . Even if you are an…
An ancient mask carved out of enchanted wood. Scale to desired size. Supports required. No holes included, make your own! I chose to print at this angle to minimize supports and hide seams on rear side. Tree Supports on build plate only…
This is 3D printable model of the Constitution Refit NCC-1701-A Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. Pieces of the necelles need to be…
The height of the leg can be adjusted from 43 mm to 71 mm.
I remixed Petr Vacek@PetrVacek_20701 's awesome model to accomodate my kitchen which needed new legs. Includes clips to attatch a plate beneath the kitchen cabinets, and also a wrench for easy tightening while the leg is under pressure.…
Print each furniture piece at least 4 times . Use any colors you like for better visibility and fun. How to Play Place one piece as a base. Stack furniture pieces on top of each other to create a balanced structure. Same-type elements…
Adjustable Support / Furniture Leg Introducing the versatile and durable 3D-Printable Adjustable Support / Furniture Leg, designed to cater to the needs of DIY enthusiasts, professional carpenters, and general consumers alike. Perfect for…
Various pieces of furniture to be used in/with your D&D scenes, figurine toys, dioramas etc. There are various files including: box of supplies, barrels, bookshelves, tables, and chairs Pay attention to scale when you slice these files,…
The source marked this model as adult content.
I needed a few legs for a bathroom cabinet, so I just made something myself! If it isn't so well visible in the pictures, the leg is slightly angled. This leg has a height of 160mm , you can of course scale it a bit in Z but note that you…
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
🦴 Steampunk Skull with Attitude – 3D Print Ready! 🕶 Add a dash of mad science and a sprinkle of Victorian flair to your 3D printing collection with this original Steampunk Skull ! Whether you're into cosplay props, desk toys, Halloween…
IKEA Kallax-inspired shelf for your dollhouse! Complete with smart storage boxes! 1:12 scale.
This is a 3D printed mount for LED strips, designed to be installed on the back of furniture like desks, cabinets, or dressers. It holds the LED strip securely along straight edges and corners. The mount is fixed with small nails, making…
A simple notched wege to stabilize shaky furniture, you push it gently (notches facing down) under the corner that needs leveling and break it once you get to the desired thickness. Print Settings Printer Brand: XYZprinting Printer: da…
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix. I used eSun PLA+ as filament and it seems to be robust enough for the small clips on…
This is a small collection of furniture for dollhouses. I just upload it for the contest as i created it for a 3D smarthome display with lights. Stay tuned as i will upload additional files (all relevant furniture i can find inside my…
Was asked if I could create a small table to replace a Sylvanian Families table with a broken leg. The one I made is not the same style, but it's the appropriate size and I was quite pleased with the result. But what good is a tiny dining…
Model house and furniture designed by a student in class. Each object is designed and oriented to print without supports. Some gluing required. The building is 2:1 length to width. 1:61 scale, although easily scalable to any desired size.
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
Usage This support foot can take some of the weigh that may be overstressing you book shelfs or other kind of furniture. It can of course also be used as a spacer for all kind of other parts. The original design was made to range from 25…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
Adjustable legs for simple furniture repairs, the ones I found at the local store were too large so I made these ones. They install with 2 screws each, and come in either horizontal or vertical attachment variants. The vertical attachment…
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials. For the instructions on the…
I needed the height of a piece of furniture to be raised so that the power point behind it was still accessible. I printed 4 of these and used them to gain lift of about 36mm. The dimensions of the print are 40mm x 40mm with a 4mm deep…
The second mini furniture set i'm making for someone. See the rest here: https://www.thingiverse.com/OfAMillionProblems/collections/mini-furniture Print by Tehnar. Category: Model Furniture
Schitt fuer Schritt Anleitung (PDF) ein gerade verzahntes Zahnrad in FreeCAD V0.18 zu erstellen. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,1 mm Infill: 40%…
Yo la commu' Voici le modèle de clips de garniture reproduit sur mesure de l'original, mais rayonné aux endroits sensibles. Pour Peugeot partner et clones 😎👌 Pour l'impression : Couches adaptatives préférable. Impression fine conseillée.…
Description: Bring high-end design to your scale projects with this curated STL megapack of modern furniture miniatures. This set includes detailed models inspired by designer pieces such as armchairs, sofas, chairs, and tables – perfect…
This model serves no other purpose other than placing a statement right on your office desk. Works also well as trophy or cup or simply as a gift. Printing Instructions Print without supports- negligible overhangs. However, I recommend…
Since the clip that comes with Rituals Car perfume is too narrow/small to use on the Hyundai Tucson vent wing, I designed this for the same and it fits pretty well.
Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…
Furniture legs (support not needed) with many heights to choose, and two kinds of nuts: smooth cylinder and with hex on top to be used with 36mm wrench (included model to print). Its new version of old model with more height options…
I printed with 0.2 layer height and 25% fill. If printing for a Barbie increase the size.
Furniture set for a complete living / dining room combo. This was part of an old project of mine where I implemented a stripped down version of the MakeItHome furniture arrangement algorithm in a solver in Houdini, these are the…
Digital 3D model of Durmstrang Institute of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. The files contain the whole wand + wand parts + connection screw in STL. This assembly system…
Designed to print-in-place without support. 0.2mm layer height works well. I printed mine out of PLA and it fits snug without play. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 4…
MItutoyo 500-184-20 Battery Cover
The source marked this model as adult content.
IKEA Malm-inspired chest of drawers for your dollhouse! With removable drawers. 1:12 scale.
3D-printed legs for IKEA KALLAX (and more). Two versions for corner and center position, each in several sizes. Currently 50mm, 70mm, 90mm, 100mm, 110mm and 130mm height are available. Features rounded corners, stabilizing ribs and…
Bunkbed suitable for sylvanian families or playmobile sized toys. Can separated for play.
Уголок мебельный с усилением 25 мм.
I'm not a fan of wasted time or material so I remixed this Mitutoyo 6 in caliper holder to save on both. There is still a small storage bin in the bottom to hold extra batteries or anything else of a similar size. Change log v1 (…
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
These connectors can be used to build shelves, storage boxes, desks, and other useful items from pieces of nominal ½ - ¾ inch thick plywood. Each connector consists of an outer piece, a 90 deg angle, an X, a TEE, and one or two inner…
Enables easy movement of heavy furniture and protects hard floor from scratches. Countersunk hole is designed to house the head of a 4mm wood screw. The top of the screw head sits ～2mm below the surface so it can't touch the floor. On…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Play with the same furniture, with itself the parents furnish? That's only available at Möbel Ideal. The dining table Byra is made with tree edge and solid wood in different sizes and is equipped with a metal frame in X-shape. Solid…
First furniture set for The Bakery. Read more about assembly, print orientation, props and coming add-ons here: Bakery - Furniture set Bakery - Printed The Bakery Note : Print 2x counter shelf Files for the bakery can be found here: The…
This collection features a variety of low poly furniture models designed for stylized projects, interior builds, and creative displays. With simplified geometry and clean proportions, the set includes essentials such as chairs, tables,…
I designed these simple furniture elements for this Victorian house model: https://www.printables.com/model/200529-victorian-country-house
This model serves no other purpose other than placing a statement right on your office desk. Works also well as trophy or cup or simply as a gift. Printing Instructions Print without supports- no steep overhangs. However, I recommend…
Joint connectors for wooden boards with a thickness of 19mm are ideal for building shelves and furniture. With a 120-degree angle and a 5.5 mm hole for screws to attach to the wall. More models and variations available upon request.…
Modified spool2kool 's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions ( SpectreGadget 's one shown in the photos). Print recommendations: Printed the clamp in…
Tiny Ikea furniture to help you design your dream home layout! All files are provided at 100% scale. I recommend printing them at 2% scale. The Layout Game 3D Print furniture at 2% scale. 2D Print the layout sheets below on A4 paper. The…
Have fun with this longitudinal fidget ring! It spins only a few times until it stops. Then you need to spin it in the opposite direction. I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please…
The Printables version will not be updated. The best place to get it is here ! Find the MobiFlight code under Section 2/Instrument Bill 'o Materials: 3D Printed Parts Arduino Mega 2560 (can be shared with other components) x2 BYJ48…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
This is just a sample. Get full set from here .
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
Barbie-like dollhouse furniture: All printed with 0.4 mm nozzle: Wardrobe - fully printable without support. Use 1.75 mm filament as a connector for doors. Table - I suggest to print “loose” version to put legs into countertop easier.…
Elegant and highly functional! I really like the elegant furniture feet from Extrutim and think the model is great. However, the basic version is too high for my use case. So I made some changes to the model to make it usable for myself.…
Wall mount car charger type 2. Fixation by four screws : 4 holes of 5 mm diameter. Please note that the shape of the socket takes into account the protective rubber of the type 2 socket. Like on the picture. The type 2 AC plug I have is…
Handle for connecting shelves in furniture.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Simple adjustable feet based on an M8 bolt and nut. I am using them for a table. The upper part fits into a 25mm hole drilled into the wood with a 25mm forstner bit. Printed in PLA. I printed the upper part with the "fuzzy skin" option in…
Im back with another interceptor model! This is Titus, a fictional interceptor featured in the movie into the storm. This model was the hardest to make. It took me a whole week to make it. The tinker cad design was so complex It took 20…
Furniture Pin The pins in the picture were printed with a 0.6mm nozzel.
I wanted to have a small side table next to my sofa on which I could put things. Instead of just screwing four legs under the wooden top, I designed a small cabinet with two drawers that is fully 3D printable. You will need a nice wooden…
I needed a Depth Measuring Bridge for my Mitutoyo Digimatic Absolute AOS Caliper. (You can read my - german - Review of this Caliper here ). Because I needed it today (when else?), I "desingned" one from scratch. OK. The price was another…
you can print without support at all. use PLA , 0.4 nozzle you will need at least one foam earplug, Flatten the earplug and slide it (starting with the back of the earplug) into the largest opening of the nose pad. And after that, you can…
Creating a replacement nut that is not available. Suitable pure round hole 25-27mm. Need to insert M5 nut Printing: Material: PETG Infill: 100% Perimeter: 2 Supports: yes
I used 2 pcs of M3x5 insert nuts and M3x6 countersunk hex screws for assembling the holder and hex insert.
Title: 3D Printed "Thank You" Keychain with Heart: A Perfect Token of Appreciation This is a charming and meaningful keychain design featuring the message "Thank You" elegantly integrated with a heart. It's a perfect small gesture to…
Inspired by the MALM bedroom series from IKEA, this bedroom set was designed for LOL dolls (fits well 10cm dolls). Includes the following models: bed with space for two drawers small drawer for the bed (print 2 of these) chest with space…
Creating a spacer for an M3 screw Spacer for large screw hole Easy and fast printing Printing: Material: PETG Supports: no Orientation: can be printed from both sides
Secure wobbly furniture with the 'Side Table Savior' angle brackets. The straight bracket requires up to 6 x 3.5 mm screws, the T-bracket up to 15, and the new L-bracket needs 11 x 3.5 mm screws. Customize the support by choosing which…
A stout little Norse hero with a horned helm, flowing beard, and a chunky battle-axe at the ready. This chibi-style viking stands sturdy on tiny boots, packed with texture from beard curls to armor panels. Printed in neutral grey and…
I wanted a Gridfinity holder for my Mitutoyo caliper where the caliper lies fully flat so that its pointy bits aren't sticking out. Behold this immense 6x2 box! Besides holding a 150mm caliper, it also includes two thin slots that are…
This a collection of models for the dollhouse furniture contest, a cat tree, cat perch, and a scratcher. All of these are modeled after cat furniture I have in my house
Jouet enfant , une voiture qui roule que vous pouvez imprimer en une seule fois sans supports. Dimensions environ 140 x 60 x 50 mm Astuce : une goutte d'huile pour aider la rotation des roues. Model BOUNANA V18 : diamètre des arbres…
This is a remix of https://www.prusaprinters.org/prints/26045 I have increased the bottom bracket to fit the thicker laptop and decreased the width of the stands since I have added a middle bar to keep the raisers in place when I take…
I recently bought a lot of IKEA BESTÅ furniture and wanted to try printing the feet myself. Then found someone using the original included feet as an adapter. Using this technique I printed a simple foot and it worked quite well. Then I…
Fill your miniature interiors with this diverse collection of STL furniture models, featuring both timeless classics and sleek modern designs. Perfect for dollhouses, dioramas, architectural models, or collectible displays, these detailed…
I have printed it with PLA and .4mm Nozzle with 0.2mm layer height. The screw holes 4.5mm and screwhead spacer has 7mm diameter and 2mm depth. For the optimal durability, please print it on one of the sides.
Easy to print, layer 0,1, infill what you want, i use PLA
