Counting matching models…
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
Most of the airbrush holder on the market can be installed beside you at your desk. This is the case of the Iwata holder and other 3d printable models out there. I designed this one to be installable at either the back end of your desk…
Ergonomic handle designed to help with hand pain on long painting sessions. Gives you secure grip of the airbrush even when holding very gently. Works also for people with hand mobility problems to help with a grip. Handle has quick…
This is a remixed version of an airbrush holder. Base was shortened to allow brush to sit in holder, cup resting fully against front edge, with a rigid hose that drops off edge of table surface. Added curved edges on main body. Opened…
Needed a stand for my Neo TRN-1, so I modified MojoBob's airbrush stand. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Filament: Inland PLA Category: Hobby
Bench mounted airbrush holder for an Iwata Eclipse HP-CS. It might work for other models of brush too but I don't have any other gravity fed ones to test in it. It prints in two halves with a soft TPU insert that doesn't scratch the…
Iwata Eclipse HP-CS Nozzle Driver For unscrewing or screwing the nozzle cap from an Iwata HP-CS airbrush but it should fit many other airbrushes (not tested). The Driver can also be left on the airbrush as a dust cover. The odd thing…
Crown cap for an Iwata Revolution BR Print instructions Took some experimenting with settings to get this to print OK Things worth trying to get good slicing/printing results: 2 layer raft, instead of a brim Reduced external perimeter…
Gridfinity 4x2 holder for an Iwata Eclipse HP-CS airbrush
A very simple cleaning pot "add on" that you can fit on pretty much any jar with a flat lid. Perfectly adapted to Iwata Eclipse HP-CS airbrush. But should work with other brands ! Includes a few holes to put paper towel filter. To build…
Gridfinity lay flat tray for an iwata neo gravity feed airbrush
Please download the "lock-rh-v10" and the "lock-lh-v10" file from the original designer.
This is simple wrench for Iwata HP-C airbrush nozzle, to lower chance of stripping thread while tightening the nozzle. Might work also for other iwatas. For best results use 0,3mm nozzle to print.
t's just a support for my airbrush compressor. It might fit to other compressor as its generic. It fits perfectly (i think) for the "NEO for IWATA" airbrush. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes…
Simple gridfinity organizer unit I made for holding an Iwata HP-CH airbrush, or similarly dimensioned airbrushes. Stackable, so you can put things like paints, tools, and whatnot on top of it, in another gridfinity storage bin, and carry…
I often find myself airbrushing without a needle cap to make it easier to wipe the tip dry off the needle. When I need to backflush the airbrush, I have to screw the needle cap first before I can do that. This little cap means I can…
Segregate and safely store the parts needed to swap (most) Iwata Eclipse series airbrush between 0.35mm and 0.5mm nozzles. Anyone who has gone down this path knows the parts are nearly identical and have almost no distinguising…
The knob on my Iwatani PRO2 broke, so I designed and printed a better one. I printed in ASA, with multicolor for the direction arrows I would recommend printing in ASA or better, as the part can get hot (not in direct contact with flame…
Got a new Iwata for my birthday. I didn't find a cleaning jar I liked online so made my own. I setup the brush cradle as a removable insert so I can make inserts for my other airbrush and other things that like jars of water. The filter…
Created this tray to help me clean my Iwata Neo CN airbrush. It has a dedicated spot for each component and an open area for cleaning. The raised edges help keep small parts from rolling or falling off the work area and getting lost.…
I've included a lower depth model (the original) and one that sits at 6u height. This matches the 6u height version of the neo model, and is perfect for putting in a gridfinity rugged case. The 2x4x6 height version also sits at an angle…
Print requires supports. The defaults in orcaslicer seem to work.
One of the holders on my Iwata air compressor was broke so I modeled a new one. I recommend printing with more perimeters, any infill.
I could not find a good airbrush holder for my side feed trigger airbrush and it was driving me crazy. I was using the Gaahleri GHAC-Swallowtail Airbrush Holder by Tom Fullen for my Gaahleri airbrush and loved the design, so I decided to…
The way I grip my Iwata HPCS airebrush was leaving me with a very sore index finger after painting sessions so I designed this cap to provide some cushion for my finger. It prints just fine with no supports. 10% infill with 95A TPU. Hope…
If painting larger-scale objects, the cup is very limiting and requires constant refilling. Rather than buying a bottle-feed airbrush, it is possible to use an extension cup to increase the available paint capacity without negatively…
I needed a way to hold either my Iwata HP-C+ or GSI Creos Mr Airbrush PS-770 while at my spray booth. For my setup it needed to be wall mounted and not clamped to the desktop and preferably not screwed into the floor of the spray booth.…
The Iwata LPH-50 detail airbrush is less common than its larger sibling, the LPH-80. The LPH-50 is popular with scale modelers; the LPH-80 is aimed more at automotive and similar work. Both the LPH-50 and LPH-80 require a regulator…
Please download the "lock-rh-v10" and the "lock-lh-v10" file from the original designer.
Iwata Cup Cap A cup cap for an IWATA airbrush. I bought my Iwata airbrush with a large-capacity cup and used an angle-grinder to cut it down to the size I preferred (mad, I know). That meant that the cup cover didn't fit so I designed…
I need a cap for the 3cc cup of my NEO for IWATA. It fit perfectly in my cup, hope it'll be the same for you ! I added a second version with little teeth above the cap for a better grip (i use the non-teeth version). Category: Art Tools
Hello, I broke the wheel on my iwatani torch, it's my first model, I certainly did something unusual but it works fine. I've added the 3d fusion file in case you want to modify it.
