1,662 models
A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
My obsession with IKEA Skadis made me want to add one to the side of the Kallax I have in my office. So I designed some holders to achieve just that. They are mounted to the two top screws of the Kallax and have slots for an M4 nut in…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…
Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant
A simple holder for a xacto knife. It is designed as safe as possible, so it won't open carrying around. Be careful not to cut yourself :) Just pull the little protection ("child safety lock") down while extending the knife. IMPORTANT:…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I planned to stop at a dozen egg designs this year, and then, yeah, nope. I've provided OBJ files rater than STL. The STLs had errors that PrusaSlicer fixed by converting them to OBJ. Both halves of the egg can be printed “right side up”…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
I made this little hook to link my kallax funitures together to cancel the noise of hitting each other. You can hide it behind but you need at least 15mm from the wall to fit it! Printed in Prusament PETG Prusa Orange 0.3mm layer height…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to mount some Skadis Boards to Kallax in horizontal mode. 2x M4 nuts required. Just print the files in the orientation, add a pause command at ~14.4mm, insert the nuts into the part and resume the print.
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
I designed the IKEA KALAX drawer to be able to use the full depth of the KALAX shelf with DVDs or video games to save filament. To make the model fit on an MK3s or MK4, I subdivided it accordingly. The wreaths on the supports serve to…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Here's a new design for the holiday season. The ornament has two patterns that alternate. I was able to get reasonably good prints by printing the ornament as a single piece, but by cutting the ornament in two, I reduced print time and…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
The calibration cube is a great example for Prusa printers, when you set the first layer so the first print give this.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
I've re-envisioned my Grand Kaleidoscope Ball as a teardrop, going back to my original files and redesigning it from the ground up. The ornament looks dramatically different from each angle. I've printed it here in 2 pieces. The first 3…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
KEEP MAGNETS AWAY FROM SMALL CHILDREN. Magnets can come loose. If swallowed, magnets can be FATAL. ABOUT THE DESIGN Another fun Easter Egg design. It has a tall, narrow pocket in the inside where you can hide a fun surprise. It uses 3x2mm…
Print approx. €8.40–€10.27 excl. taxPreliminary estimate for one variant
Ich habe mir diese Halter für die Schraubendreher von Wera Konstruiert. Das Set besteht aus dem Adventskalender 2021. Die Bezeichnungen habe ich mit Buntlack angemalt. Alternativ kann man natürlich auch mit Filamentwechsel farbig drucken.…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I recommend printing perpendicular to the printing plate, many more details will be preserved, there are not so many visible layers. The model can be printed without infil. Other models are in the mountain collection :…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
See also my new version: https://www.printables.com/model/1140261-calendar-hook-wallhanger-kalenderbugel-2 Printed in PLA Part is slightly flexible and can be removed to flip the page. Designed in Onshape…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Holder for my Kaleidoscope Coaster Features Allows to use the coaster as decoration while highlighting its beautiful visual effect Print Instructions Nozzle diameter : 0.40mm Filament : PLA, PETG Holder Default 0.30mm DRAFT Print settings…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
Print approx. €6.23–€7.62 excl. taxPreliminary estimate for one variant
This is a variation of the Mobius Kaleidocycle. The changes are as follows メビウスカレイドサイクルのバリエーションです。変更点は以下のとおりです。 The distance between the hinges has been reduced to 22 mm by improving the shape. The length of the hinge is 50 mm, whereas…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
This is the third in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to…
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
Yes, this needs supports. Use organic supports. An overhang angle of at least 30 degrees works well. I use a support blocker on the top loop. It prints better with supports, but it prints well enough without them. I use just a single…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for one variant
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Features Honeycomb discs create a kaleidoscope pattern Spin the discs to choose your motif Easy to print and assemble Easy to disassemble and clean Custom Display Stand available Kaleidoscope Coaster Holder Print Instructions Nozzle…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Here is the model for an insert for an Ikea Kallax Drawer with the dimensions 27.5 x 30.5 cm. The box has the dimensions that it fits exactly 3 times in width and 2 times in length in the drawer. It's perfekt for cable management or…
Print approx. €5.02–€6.14 excl. taxPreliminary estimate for one variant
This is the last in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to…
Print approx. €6.37–€7.78 excl. taxPreliminary estimate for one variant
This simple 3D-printed end stop prevents your IKEA Drona box from going too far into the back of a Kallax shelf, ensuring it sits flush against the back wall. It's a quick and easy way to keep your Kallax tidy and organized.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This is the second in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want…
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for one variant
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Nummer 1 - 24 für Adventkalender. gcode mit Farbwechsel (ohne Gewähr)
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
IKEA doesn't sell the LEKMAN boxes anymore :( which were THE best boxes for the KALLAX shelves! So I made my own. As the original is 33x33x37 (WxHxD) cm and this is too large for the Prusa XL, I stripped off 1cm from the longest side…
Print approx. €66.40–€81.15 excl. taxPreliminary estimate for PETGSource material: PET
I printet EASY 13 with 200%. This commandments can now be held by Easy 13.
Print approx. €4.59–€5.60 excl. taxPreliminary estimate for PETGSource material: PET
cílem hry je získat co nejvíce valečku do „banky” Na začatku hry se hrači dohodnou kdo bude začínat. Začínajíci hrač si vezme na své straně z libovolného důlku veškery obsah válečku a postupně je rozděluje do ostatních důlku po směru…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Posuvný kalendář na dny v týdnu, třeba se bude někomu hodit Tisknul jsem s tryskou 0.6, výška 0,15…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
I have desight a new sealing insert for the IKEA soap dispenser KALKGRUND. I don't know if anyone else had this problem. There was always a negative pressure in the bottle, so the soap was only dispensed very timidly. With the new sealing…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Choke replacement key for Baikal IZ 27 shotgun
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Ein hübscher Rahmen im Barok-Stil für einen Abreißkalender. Entworfen für Abreißkalender mit den Abmessungen von 70 x 100 mm. Befestigung des Kalenderblocks erfolgt über die Blechlaschen. Passender Tageskalender ist hier zu finden:…
Print approx. €8.74–€10.68 excl. taxPreliminary estimate for one variant
Philips Hue Play Lightbar Mount for IKEA Kallax Enhance your IKEA Kallax setup with this custom mount for the Philips Hue Play Lightbar . It simply slides over the top edge of a Kallax shelf and positions the lightbar to shine straight…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Abstract caleidoscopic round winterwonderland
Print approx. €7.87–€9.62 excl. taxPreliminary estimate for one variant
Ich habe dieses Projekt gedruckt : Druckvorlagen (printables.com) und dachte mit eine Wandhalterung wer für den Garten nicht schlecht, also mal Schnell was entworfen. Ich habe es in PETG gedruckt, wegen der Sonne usw. !
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Třecí deska pro terčovce a skaláry, stačí doplnit o přísavky. Vhodné tisknout na strukturované podložce Breeding plate for discus and angelfish; simply add suction cups. Best printed on a textured build plate
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
Besonders ästhetisch in allen Prusament Transparent-Galaxy-Sorten! Meine neue Lieblingsfarbe: PETG Kaminrot. Die darin befindlichen Glizerflocken ergeben mit den Fressnelllinseneffekt wunderschöne Kleinst-Regenbögen-Kalleidoskop Effekte.…
Print approx. €2.79–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Modification that make acryllic hinges fit IKEA Kallax design
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Koupili jsme si nový kalorimetr - tenhle: 2099 Vodní kalorimetr 350 ml . (Zdá se, že výrobcem je OPTIKA Science Italy . Přestože je to značné vylepšení ve srovnání s našimi stávajícími kalorimetry z NDR, i tento má své mouchy. Teploměr je…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Děravá kalkulačka je manipulativní pomůcka určená k vizualizaci matematických představ v oboru malé násobilky.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Henry - commonly called Hal by his friends and locals of Skalitz, or occasionally Henry of Skalitz - is the main protagonist of our game Kingdom Come: Deliverance . We prepared a 3D printable version of Henry's figure. It's available both…
English below! Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen. die Kurzanleitung zu dieser Vorgehensweise…
IMPORTANT In the current orientation, the door handles will snap . Please print them on its side and with supports to improve their strength. I designed and 3D printed cabinet doors for IKEA shelves. They don't require any screws, utilize…
A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…
Background My print room is furnished almost exclusively with IKEA Kallax bookcases so I tweaked Zach Friedman’s excellent Gridfinity grid to fit into the Kallax drawer inserts. Printing It prints, as the original grid, fine at 0.2mm. My…
Akali makes appearances next to other street performers in cities she is visiting. Combining mixed martial arts and the beat of her own rap lyrics, she delights audiences with her bold lyrical rap and punk ninja style. She started…
Zoey’s Knife (Shin-kal) About the Model ** This model is for costumes, cosplay, pretend play, and display purposes only. IT IS A TOY. The edges of the blade have been deliberately dulled for safety. ** Step into the world of KPop Demon…
English below 2 Möglichkeiten zur Überprüfung des Flows: Hinweis: Wenn Du größere oder kleinere Würfel bevorzugst, skaliere sie bitte mit deinem Slicer auf die von dir bevorzugte Größe. 1. Möglichkeit zur Berechnung des Flows: Wähle…
Upgrade your IKEA Kallax with this precision-engineered Roller Shutter (Tambour Door) . This 3D-printed insert fits perfectly into a single Kallax cube, offering a sleek way to hide your items with a smooth, satisfying sliding motion.…
Miniature version of the IKEA KALLAX furniture and accessories IKEA KALLAX is a universal and popular furniture set that forms the basis of many households. Now you can print a miniature version of this popular concept and use it as a…
After a few failed attempts at trying to print ecoiras kaleidocycle I decided that I should try and design my own and so I did although I used the same features and design I constructed my own model from scratch, It is designed to be very…
I tried similar models from printables.com, but they all had bad tolerances or weak grip strength, so I designed my own. In the second photo, I stacked 200g worth of stuff on the clip and it didn't move. Without needing tape for extra…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Complete series of Ikea Kallax shelves. With accessories. In the next few hours I will add more accessories
Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…
IKEA Kallax-inspired shelf for your dollhouse! Complete with smart storage boxes! 1:12 scale.
In Egyptian mythology, Duamutef was one of the four Sons of Horus, tasked with protecting the stomach of the deceased. Represented by the Jackal, he is the guardian of the East. This model is a stylistic recreation of a museum-style…
English: Simple, easy to print and very robust IKEA TROFAST rail for KALLAX. Designed for 4,0mm - 4,5mm screws with a lenght of 20mm. Installation aid included. print Settings: layer height: 0,2mm perimeter: 4 infill: 15% material: PETG…
A gridfinity base plate for an Ikea Kallax Drawer. 6x7 The original was a couple millimeters to narrow, so I fixed that. I also removed the fillets around the outside so it is less likely to accumulate debris.
I didn't need all of the structural integrity that the original had built in, so I updated this to get rid of one of the legs and remove the t-join. The result is that you only need supports to the build plate for the bottom model. I…
Kleiner Pokal für zweifarbigen Druck (Sockel und Pokal sind separat). Beide Teile sind modifizierbar um zum Beispiel einen Text auf den Sockel zu drucken. Support bei den Griffen am Pokal empfohlen. Beliebig skalierbar. Befestigung der…
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
Calibration + Test Cube 20 Kalibration + Testwürfel 20
🇬🇹 Welcome to Guatemala! The Ancient Ruins Collection - Mesoamerica is a dedicated subcollection to the legacy of past civilizations in parts of what is present-day Mexico and Central America. This model was designed by Dany Sánchez . The…
Holds 33 records, designed to fit IKEA's Kallax. 2 versions: one with both sides open, other with one side closed. Inspiration taken from other creators model.
I printed several lightsabers from 3D printing world and the children had a lot of fun with them for two days until they were unfortunately both broken :(. That's why I did the work (way too much xD) and developed a version of this old…
English version bellow. Buďte opatrní pro příliš nízké nastavení trysky, můžete si poškodit plát! Kontrolujte nastavení výšky pomocí očí v úrovni podložky! Model slouží pro kalibraci první vrstvy. Zvolte si počet “zoubků” podle toho jaké…
Simple bracket to connect two side-by-side Ikea KALLAX shelves, using the existing mounting holes and screws.
I wanted to reuse my old ITX motherboard and ATX power supply to create a small NAS with all my old HDDs. I only use it to power it up a few times per year to create a backup from my main server. Just to have some extra backup. It is not…
A gridfinity base plate for an Ikea Kallax Drawer. The spacer for the depth of the drawer is only at the back, so that no space is wasted in the front. You only need to print one set of files. Depending on the size of your printer, you…
This is a set of various lightweight drawer inserts for Ikea Kallax drawers. 8 of these will fill the drawer entirely, and can be stacked for a total of 16 inserts per drawer. They are exact width, and slightly short on length to account…
Sized to fit on my printer and with a dovetail join. To install a full set of slides in a Kallax cube, print 6x of each slide, 2x of vertical alignment guide, and 1x of front alignment guide. Requires #6-¾ screws or equivalent and use MDF…
Added version with pin holes to help with aliment and gluing (eventually) Print 4 and glue together.
Stackable organizer for Ikea Kallax drawers with optional label system. Inportant Be aware there are at least 2 types of Ikea Kallax out there and they have different dimensions. Please measure size of your drawer before printing and…
Durch dieses Lagerungssystem passen in jeden Kallaxwürfel 8 Filamentspulen. .2 Layer 15% Infill keine Supports Zusätzlich werden 8mm Rohre benötigt. In meinem Fall diese hier. Rundrohr Edelstahl Ø 8 mm, 1m bei HORNBACH kaufen .
Ein Würfel zum Testen der Kalibrierung der X/Y- und Z-Achse Ihres 3D-Druckers. Informationen X: 20mm Y: 20mm Z: 20mm Keinen Support Füllung: 30% Schichthöhe: 0.2mm Düse: 0.4mm A Cube to Test the Calibration of the X/Y and Z Axis of Your…
Für unseren Weihnachtswichtel habe ich ein Regal erstellt. Als Vorlage dazu diente ein 2x2 Kallax Regal. Die zugehörigen Boxen gibt es natürlich auch.
I wanted to add shelves to my Ikea Kallax, after a lot of looking I designed these. These are two types of pieces. Front/Center (FC) and Back. For each box/cube you need to print 8 FC and 4 Back pieces. Once you get an idea, you can…
With this huge organizer, you get up to 60 cables or other things under control. The four pieces, which are great for printing in smaller build spaces, fit perfectly in an Ikea Kallax drawer. The size of the honeycomb compartments are…
Diese Schubladen-Organizer sind so konzipiert, dass sie perfekt in die Schubladen des Kallax-Regals passen und zusätzlichen Stauraum und Ordnung bieten. Sie sind in verschiedenen Größen erhältlich, um perfekt zu Ihrem Einrichtungsstil zu…
3D-printed legs for IKEA KALLAX (and more). Two versions for corner and center position, each in several sizes. Currently 50mm, 70mm, 90mm, 100mm, 110mm and 130mm height are available. Features rounded corners, stabilizing ribs and…
Kalibrační kostka pro zjištění nasobiče extruze (Flow) Teaching Tech 3D Printer Calibration (teachingtechyt.github.io)
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
There are two different heights (100mm and 50mm) and three different divisions (quarter, eighth and sixteenth). It is possible to stack 2 dividers 50mm high on top of each other. If it dont fits in your drawers, try to tighten the screw…
A low profile key cap, tested with Gateron low profile switches
Bei der Konstruktion dieser Vase wurde ich von der Optik eines Pokals inspirierte. Das Modell muss im "Vasen Modus" gedruckt werden. Ich habe eine Layerhöhe von 0.15mm verwendet. Winner cup inspired vase. Print im "Vase Mode"!
This is a SNES cartridge holder for NTSC (North America or Japan) cartridges that will fit up 60 cartridges in a (slightly modified) IKEA Kallax cube shelf. Files 6 Slot - the basic cartridge holder, can hold 6 cartridges Dovetail -…
Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Calibration Cube [CZ: Kalibrační kocka] [SK: Kalibračná kocka]](https://media.printables.com/media/prints/211029/images/1934973_e67afc1f-8c1a-468f-b588-310b0bd589a2/snimka-obrazovky-2022-05-22-100430.png)
