5,202 models
Eine kleine Dose ist unglaublich handlich und vielseitig. Sie passt in jede Tasche, schützt ihren Inhalt zuverlässig und ist perfekt für unterwegs. Ob Snacks, Gewürze oder Kleinkram – alles bleibt ordentlich verstaut. Trotz ihrer Größe…
🥒 Articulated Pickle Buddy – This little pickle is just chillin’ on the edge, with fully movable legs and a laid-back attitude! ✅ Great as a Fun Desk Toy or Display Figure ✅ Pairs perfectly with other articulated buddies ✅ Support-Free…
Quick Release Buckle Clip (backpack & belt Clip)
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Mini Pickle Buddy – The tiniest, sassiest pickle in town! This 0.3 g buddy prints in just about 4 minutes and makes the perfect companion for your Banana or regular Pickle Buddy. ✅ Size: Tiny but mighty – only ~0.3 g ✅ Perfect for…
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
This took a little experimentation (fluid dynamics and water tension… what a fun pair of things you are!) but now you can enjoy recycling your old bottled water containers into watering cans! These are perfect for indoor plants and…
!!! Quick Side-Release Strap Buckle !!! 2:30 Print time (Can surely be optimized) Max. strap width 27mm I recommend printing in PETG It sure does what a Strap Buckle do. Feel free to do anything with my precious Quick Side-Release Strap…
Easy and quick to print !! Print in Place
My Own Take on Plastic Brass knuckles designed thicker to be nice and strong around your fingers. PRINT: Infill- 30% cubic Layers- 0.2mm 4 top and bottom Perimeters- 3 Brim- None Support- None
This is a simple yard/garden water sprinkler. It has no moving parts and creates approx a 30' (10m) diameter spray of water. It is printable with no supports required. The triangular outriggers are added to allow for a "Spike" or tent-peg…
Overview The GoPro quick release buckle has been an important component of the GoPro mount system since time immemorial. Somewhere around the release of the GoPro Hero 5, GoPro introduced a new version of the quick release buckle that had…
Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5 (for strength). No supports needed. More durable when printed using PETG. Assembly The components fit together using a friction-fit mechanism. Push the "Lock" piece…
Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…
[Update Nov.23, 2021 : I came up with a variation on the original design; this second version works betters on some seatbelts. See the additional files with “06” in the name.] You can mail order one of these for $1 and wait a week or…
Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.
I love Altoids but hate throwing away the tin. This print turns an Altoids tin into a fishing tackle tin. Great for throwing a few fishing hooks, bobbers, split peas, etc. Don't forget to post those makes! Need a Fishing reel kit? Try…
Replacement for broken male part of buckle for camera backpack Lowepro Orion Trekker II. Print settings: Layer height: 0.2 mm; Perimeters: 3; Solid layers - top/bottom: 7; Infill: 50%; Supports: No.
I designed a replacement for a broken buckle from a Backpack.
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…
Customizable stencil for marking pickleballs to be able to easily tell which ones are yours. I've included the original stl shell that fits 73mm diameter (standard) pickleballs (I tested this on Onix pickleballs, shown in pictures.) Load…
Ein vollständig druckbarer “fully printable” Kleiderbügel in drei Teilen. So paßt er auf das Druckbett des Prusa i3 MK3S/S+. Einfach jedes der drei Teile ausdrucken, sieben Nieten dazu, alles zusammenstecken, fertig. Wem der Halt der…
Collapsible Water Sprinkler (Print in Place) Sweet collapsible water sprinkler for your kids. The water connection needs a little support. You only need the original seal of an adapter for the tightness. Model printed with: Prusament PETG…
5/7/2024 UPDATE: I updated Trophy_v7.3mf to enable editing of the “#1 Dinker” text. I also added STLs for 1st, 2nd, and 3rd place. Enjoy! ================================================= I designed this primarily in Fusion360 and tied…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
Description: A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required – organic supports were used. Fits: 19mm…
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
After Christmas I needed a tool or winding up the cables of the fairy lights.
After searching for a knuckle strap for the Quest 3 controllers I couldn't find any to buy or print which i liked. So i decided to modify the model of SSpt to get a feeling like with the strap on the Valve Index Knuckle controllers which…
Tried to create a belt buckle as the older is broken. Thing is thill work in progress, as it's still a bit slippery, but in general works and I've tried to redo the original part as far as I can. Printed it with ASA-X and seams to work…
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
EN: The plant hanger (spare part no. #700650) for slots in the alluminium construction of the Israeli PALRAM Multiline 6x8 greenhouse. I also prepare 90° rotated version. Printed from PETG with supports. CZ: Háček (číslo dílu #700650) do…
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) Supports needed Scale it as you like :)
Harke für das auflockern der Erde bei Indoor Pflanzen. Sowie ein Schaufel, mit längerem Griff.
Here is a little remix, because a friend asked me, to make a birthday present for her. Here you can place 6 small knocker bottles . These boxes are also stackable, but not compatible with the other original boxes
Schlagring Schlüsselanhänger Knuckles Keychain
I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…
Kabelklemme zum Befestigen des Kabels am Staubsaugerschlauch. Hiermit lässt sich das Kabel des betriebenen Geräts am Staubsaugerschlauch befestigen, sodass es weniger beim Arbeiten stört. Als zusätzliche Sicherung kann noch ein Gummiband…
Hinge for Building blocks. works with duplo stones. is printed in Pla with print in place, so there is no need to assemble anything! works best with 0.15mm layer hight. 180 degree rotation.
I needed some attachments to my T Track and none of the models available matched my Rocker T-track. I modeled the track and an insert that slides inside. I chamfered the bottom edges of the insert to print with no supports. You can print…
The female thread works with a US garden hose (0.75 11.5NH seems to work well). The male thread is BSP 0.75, which I guess is used on some sprinklers in the UK and/or EU? TBH I'm not entirely sure if this is useful for any more than one…
Der Blumentopf Untersetzer ist geeignet bis 93mm Topfgröße, kann aber auch nach belieben vergrößert oder verkleinert werden. Ideal geeignet für die Pflanzenanzucht zb Tomaten.
Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.
Der Klebefant hält immer etwas Klebefilm bereit und macht dabei auf dem Schreibtisch eine super Figur. Überall anders natürlich auch. Der Klebefilm ist so in dem Abroller befestigt, dass er nicht rausfallen kann, jedoch kinderleicht…
This is a remix of Klein CL220/CL390 Clamp Meter Hanger Clip which should work for all these models that I am aware of: CL800, CL900, CL700, CL600, CL450, CL440, CL390, CL220, CL120, MM600, MM400, MM300. There could be more models. If you…
These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…
Had to create Storage for my Pilot Logbooks and Tablet similar stuff.
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Handy key ring for shopping - no need to find coins for the shopping chart. The coin size is for danish 10kr. coins, but you can modify the model for other coin sizes as the STEP files is included. >> If you like it, please leave a…
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy, G-code soubor “ 6b ” je pro dvoubarevný tisk…
Replacement male side-release buckle for Quechua/Decathlon backpacks with a 40mm belt. This specific buckle was found on a “Quechua Bionassay 22” backpack, but will likely fit several other backpacks using the same design. The code on the…
Print with "Fuzzy Skin" settings, and let your kids throw them around the house!! Great fun
Male part of a Deuter Backpacks belt / strap buckle. Fits 3cm wide straps, e.g. the waist strap on a Futura 22 backpack. The pictures show how the strap should be routed through the printed part. Prints in 41 minutes at 0.15mm layer…
Resized to Barkleys Case for candy Barkleys; Altoids 6 compartments https://www.thingiverse.com/thing:2434938 Print instructions Category: Organization Print Settings Printer: K8400 Rafts: No Supports: No Resolution: 0,1 Infill: 25
Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…
Sue made a nice wind crocheted wind spinner. It needed a swivel turn-buckle to hang it. It is printed as one piece. There is a single empty layer between the two parts (0.2mm). After it prints, you have to “snap” it aparts and then spin…
ice scraper in knuckles no suports needed
Ein Schmetterling, um eine geschlossene Fliegengittertüre nicht mehr zu übersehen. Es werden 2 Schmetterlinge benötigt, einer auf jeder Seite der Türe 8 Magnete 6mm x 1mm (2 je Schmetterling) Mit ASA gedruckt, um UV beständig zu sein. A…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 25+ Supports: No Print Orientation: Default as modeled Brim: No
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
Kleiner Teller für die Kinder spiele Küche
Buckle for flat elastic band 7mm x 1mm originally created for secure the band to 3d printed protective gear Print instructions Just standard Prusa 0.3(draft) profile
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy Další podobné modely lze najít v mé kolekci “…
Height 116.6 mm Width 180.7 mm Depth 80 mm Version 2 of my small watering can for my carnivorous plants. Can also be printed at 130 or 150 per cent (see pictures). For the print: Resolution: 0.2 mm Filling: 100% Filament material: PETG,…
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
When making pickles or sauerkraut, you need to keep the vegetables below the water level to prevent mold from growing on them. This simple print lets the liquid through and pushes the vegetables below the liquid level! Keep in mind that…
Car tissue holder that fits into a car cup holder. Uses tissue from a standard box. 82mm outside diameter, 200mm tall. Has a solid lid option if you want to use it for something other than a tissue container. This fits in our Honda Accord…
materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru pro přesné lepení je užitečné používat montážní otvory 1,8mm a kousky filamentu G-code soubory jsou pro různé barvy, G-code soubor “ 6b ” je pro dvoubarevný tisk…
This is used to add certain drill and bit indexes to your MODbox. I believe DeWALT and Craftsman have similar cases that stack together. This allows bigger items to be attached to the outside rail while giving you more space inside your…
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
Be sure to print a bakers dozen and try various colors and filaments to see what might look yummy. Don't eat this obviously. I printed many of these, one of which looks like cookies and cream! (Prusament Marble Grey PLA) Printed with a…
Our original Qwirkle game had - after years of playing - lost the colors on the blocks. Also it was far to big to take it to a bike travel. So I made a smaller version by myself. Print “Inlay” 6 times with different colors. Print “Boxes”…
Small but practical screwdriver and pliers holder. Material PETG or PCTG.
Kleiderstangenhalter für 20mm Durchmesserstangen. Leichte und einfache Positionierung durch Mittelloch. Innenabstand für die Kleiderstange = Gesamtlänge minus 2x 3,5mm. Zur Montage: Erst eine Seite Halter verschrauben, dann die zweite…
Für unsere Sonnensegel brauchten wir einfach zu handhabende Seilklemmen für Kunststoffseile. Da sich die Seile der verschiedenen Hersteller unterschiedlich verhalten, kann es notwendig sein, eine kleinere oder größere Klemme zu verwenden.…
EN: The offspring insistently demanded, that the Ikea Aftonsparv Soft Toy Alien (ours is called ‘Günther’) should also sit at the table. So we immediately had to find a suitable seat for Günther that could simply be clamped to our 25 mm…
Use Standard 3D printing slicer to Build this piece. Other Creations : https://www.instagram.com/leclubsandwich_studio/
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Z ameriky jsem si objednal dvě sady bench dog s finishing cones. Při minulém projektu jsem potřeboval i finishing bridges. Problém je ale s nedostupností v…
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Gardena Sprinkler Hose Fixation Hook aka Schlauchregnerbefestigungshaken (and yeah , that german 32 character word is grammatically correct) Print with PETG for outdoor temperature stability. Otherwise the sun will “melt” your PLA print…
I created a Paracord Magnetic Buckle (3x1mm magnets) for everyone, who love making paracord bracelets, etc. :-) This model I created entirely by myself. Whole Paracord Magnetic Buckle have dimensions cca 35 mm x 17,5 mm x 5mm in folded…
I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…
I've engineered this webbing buckle to offer enhanced grip on webbing bands, eliminating any loose ends. The design is versatile, compatible with a broad spectrum of webbing bands. It's crafted to stay securely in place while being…
Ablage für kleine Teile , wie sie beim Schrauben und Basteln im Modelbereich oder ähnliches anfallen. Storage for small parts, such as those used for screwing and tinkering in the modeling sector or similar.
Update: see universal version for additional models. The unique screw hole location on the back makes this version only work with the CL220 or CL390 model for now (reported CL120 will also work with this design by sheeds71). If I can get…
Mit diesem Teil kann eine Kleiderstange mit Durchmesser von 20mm befestigt werden. z.B. in einem Kleiderschrank. This part can be used to attach a clothes rail with a diameter of 20 mm, e.g. in a wardrobe.
Trays to deposit small parts (screws, pearls, etc)
This sharps container for diabetes needles contains a holder for a Tickle Flex and new needles. The hazardous waste logo is printed with a color change mid layer by setting the number of extruders to 2 and setting the extruder change…
Suggested print settings: No supports are needed but follow the suggested print orientation for ideal results. Buy me a coffee? If you like my work, show me a little support by buy me a coffee . Appreciated!
Buckle for 36mm/1.4inch width belt. Print Settings Printer Brand Prusa Printer MINIIS Resolution .15 mm Infill 100% Filament Prusament PLA Recycled Build Plate Textured steel sheet Added paint-on fuzzy skin to imitate the feeling of the…
This is a replacement part for the clips used on Vaude rolltop bicycle bags
This lid is designed for any different purpose, but not high temp preservation, obviously. It can help to protect the loose material stored inside the jar dry and safe. For liquids, change the printing material to PET/G, ASA and so on.…
Beschreibung Grünes Monster mit weißen Hörnern – 3D-Druckvorlage Dieses süße Wesen bringt gute Laune in jedes Zuhause! Die Figur zeigt einen niedliches grünes Wesen vom anderen Stern mit großen Knopfaugen, freundlichem Lächeln und einem…
The Plano 3500-series tackleboxes make for pretty solid parts storage. They're solidly injection-molded with clips that are a huge upgrade from those cheap “kit boxes” that come with the typical maker “assortment" packs. There are plenty…
Remix of the original model by duke_v. I resized the middle part and adjusted the edges of the model slightly. Link to the original model: Thingiverse Link Link to the author's account: Thingiverse Link Print instructions: The best choice…
Kleiner Halter für Headsets oder andere Gegenstände.
![[REMIX] Side Release Buckle](https://media.printables.com/media/prints/893197/images/6954021_bcb3ca3a-2941-4485-b2c8-8efc9394b770_1937b2a9-331b-4a86-a6f8-c3370d38a7c7/remix-srbuckle-1-1.jpg)
