895 models
Este es un test de retracciones muy sencillo en el que se intentan probar distintas situaciones y distancias. Además, si el logo de Control3D no sale, puede ser indicativo de tener las retracciones altas Abriiiiiiiiiizos Te dejo por aquí…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
I've printed a custom fan duct for my Ender 3 V2 and I didn't want to re-print everything just to mount the ADXL onto it. Instead I got highly inspired by this drag chain mount. I designed my own based on this simply because I liked the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
NACA based air inlet (duct). Size can be adapted by scaling the STL-File. Inlet width: 18.5mm, length: 37.3mm. Inlet hight: 3.3mm. Works great for motor cooling of RC gliders. Retrofitting on existing fuselages possible.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed version of Q's ADXL345 mount. I modified their version to fit the Adafruit ADXL343 which has M2.5 holes instead of M2 holes. Like Q's version, you have to replace 2 of the M3x25 bolts with M3x40 bolts.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
About model Modified design of a model which can be found on Thingiverse. Compatibility Should fit to Delica, L300, L400 (1986 - 2004) Print info It's an harder print , due to stability issues of thin walls untill they are connected with…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Bracket adaptor for mounting a PiCam V2 onto a Dynamixel digital servo
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Os presento el Cali Nozzle , un archivo 3D pensado para poner a prueba nuestras máquinas y saber si están imprimiendo correctamente. No hace falta escalarlo, al tamaño real ya es suficiente para poder evaluar los aspectos más importantes…
I made a remix of this . I add the bottom protection in order prevent the screw to damage the PCB on the back of the bed and made some wall thicker to reduce the flex. Print the 2 parts and assembly using an M3 nut and max 10mm screw to…
Muy buenas a todos los interesados en mejorar vuestras Ender3 S1 y S1 pro Versión 2_11/04/2023 Nuevo ventilador de capa: muchos os habíais quejado de que el ventilador de capa era demasiado difícil de imprimir (y teníais razón). He…
Mclaren mcl35, mclaren f1 car for 2020 season
Os dejo aquí uno de los ejercicios de la Academia Online Control3D como es un llavero giratorio multicolor. Esta sencilla pieza se puede imprimir tal cual, con cambio de color (M600) o con algún sistema multimaterial como el MMU, AMS,…
I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts. I hope it's useful for someone else ;)
This design is an adapter for the ADXL345 Accelerometer to be mounted on the Creality Sprite Extruder of the Ender 3 S1. There are two versions of the adapter: The first version requires 4 M3 inserts, 2 for mounting the ADXL and 2 for…
A 3D model which can be utilised to test various printer performance metrics, including: stringing, overhangs, bridging and more.
This is a hybrid between 2 prints I had found on Thingiverse that had ups and downs. The first one fit perfectly, but the front looked horrendous. The second didn't fit well, but looked great. I mixed them and used that to make a cleaner…
Este sencillo test tiene el objetivo de comprobar los cambios de color en vuestras máquinas, ya sea bien usando M600 o cualquier sistema multifilamento. Os aconsejo que lo hagáis con colores con mucho contraste (ej.: blanco y negro) para…
Test de voladizos Control3D Desde Control 3D hemos creado un test definitivo, en el cual vamos a ver la capacidad de nuestra máquina a la hora de imprimir voladizos y puentes en varios ángulos. Los ajustes de impresión son muy sencillos:…
UPDATE Added v2 (RECOMMENDED) Changelog Easier to tighten. Accommodates: Standard ADXL345. BTT ADXL345/S2DW (see this make ). 3 versions of the mount (see filenames for explanations). The bed spacer now plugs into the mount. BOM 4 x M3 x…
Inspired by the mount from pedrolamas, I remixed their .stp model into this version. It clamps to the bed of my CR6-SE and my Ender-3, with the same three screws approach as the original, except that I added hotmelt inserts and a pillow…
ADXL345 Mount for FLSUN V400. A longer screw is needed to fix it.
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
CREALITY SPRITE SONIC PAD ENDER 3 S1 S1 PRO X AND Y AXIS ADXL345 G-Sensor Mount remix X axis mount more rigid and mounted permanently, sensor screw holes enlarge to fit m3 screw. To mount on sprite extruder. may need slightly longer m3…
You will need: 2pcs M3X8 screws for mounting on the head 2pcs M3X5 to fix the board on the holder
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Made for the “With Voltage Regulator” type of ADXL345 boards like shown in the Klipper docs. https://klipper.discourse.group/t/raspberry-pi-pico-adxl345-portable-resonance-measurement/1757 It mounts to a volcano heater block by unscrewing…
I wanted to use an ADXL345 accelerometer to measure resonances in Klipper in my Ender-3 V2 glass bed, but there is no straightforward way to attach it, so I designed this quick mount that will allow you to get the accelerometer aligned…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered captive mount ADXL345 bed mount, it's designed for PEI covered beds of no more than 6mm deep total. Glass surfaces won't fit here! Keep your…
This fits the popular ADXL345 module that measures approximately 20.2mm x 15.5mm with eight pins along one long edge and two M3 screw holes on the opposite edge. It should be a simple print in ABS, ASA, PC Blend, nylon CF, or really…
Fun spiral fidget by L3D PrintLab
This is a quick and simple model to mount the adxl345 to Creality style hotend nozzles.
Bracket for securing the ADXL345 accelerometer to a V6 nozzle. Available in both heat-set insert and thread tapping types. Required: One M3x10 screw and two M3 screws of appropriate length to secure the accelerometer.
You can scale to suit but at 100% it just works and doesn't use that much filament. 0.15mm layer height using a brim. If you print multiple on 1 bed, make sure your retraction settings are dialed in as it will create multiple artifacts.
A holder for the WAGO221 with labels L1, L2, L3, N, and PE. The holder mounts with M5 screws. An additional model of the holder is available without labels. The Wago fits snugly, requiring a slight pry to remove. I printed at a 0.16mm…
A bracket to allow the ADXL345 to mount to the Neptune 3 Pro printhead to measure the resonance on the X axis This designs uses m2 nuts and bolts to secure the ADXL345 board to the bracket. and you'll need to m3x20 bolts in to mount the…
Of course, it is another calibration cube… with a twist. We all want perfect prints (if you don't then, this is not for you, jk still try it please). Countless benchies, dragons, cubes, and cats are being printed to push our printer to…
This is a case for the Mellow Fly ADXL345 USB module. Print in your favorite filament. Use M3x10 cap screws to attach the two halves with the USB module inside. I recommend clear filament to be able to see the blue light. The case has a…
I was not happy with many of the adxl mounts that I could find. I liked that the original model used a press fit to attach the mount temporarily. Unfortunately I did not have the Fystec input shaper. The original part was only available…
A simple 2in1 mount for an ADXL345 on the Creality Ender 3 S1 / Plus / Pro or all Sprite extruders / Pro.
Modeled for Ender-3 S1 Pro using right-hand stock fan mounts. Reuses stock short M3 from shroud to mount the sensor, mated with a M3 x 4mm brass insert. Requires M3 x 8mm, possibly 6mm, to replace the repurposed shroud screws. Amazon US…
A mount for the DMG Gameboy on the Ikea Skadis
Gameboy Color mount for the Ikea Skadis
I didn't have any screws lying around for the printhead mount so I moved it to a place where I could reuse the screws. Also changed the ADXL clasp so that it can accommodate a bare ADXL345 board with soldered on pin headers. I printed…
Little remix of the ADXL345 bed mount of the Neptune 3 Max, but shortened to fit onto the default PEI sheet of my Neptune 3 Pro. Fits onto PEI sheets with a hole distance of 91mm (or 81mm using the second variant). Hole diameters are 3mm.
I wanted a secure way to mount the sensor with stock hardware, sine the other mounts for the Super Racer were just integrated or dependent upon custom effectors and hot ends. I also didn't want to make any permanent changes to the…
I needed a set of brackets to run the input shaping tests on my Ender3 V3 KE, and Creality makes you sign up for an account… which bugged me. So I signed up, downloaded the files, and I'm posting them here in case anyone needs them. Lord…
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
An X axis mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount . This mount was designed for the Neptune 4 Pro but may work on other models leveraging the metal guide rails. Please note that someone has explicitly tried…
This is a simple two screw wall hanger for Lego 42228 McLaren MCL39 F1 Car. Requires a red 2 long Lego axle piece, or a Lego Technic 2 long pin. These should be included in the extra parts with the set itself. The second picture shows…
A bracket to allow the Adafruit ADXL345 to mount to the mini-afterburner in order to do pressure a advance. This designs uses m2 nuts and bolts to secure the Adafruit ADXL345 board to the bracket. and you'll need m3x40 bolts in to mount…
I made a simple housing for the ZB2L3 battery capacity tester. It contains ZB2L3 circuit, resistors and the 18650 battery holder. There's also enough space to add a little heatsink block on top of the resistors. Only "Resistor Vent.…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
Este diseño es uno de los test de nuestro nuevo curso de impresión 3D con resina. Info del curso aquí https://control3d.net/curso-de-impresion-3d-con-resina/ Suscríbete aquí https://control3d.net/registrate/ Test de exposición y…
To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…
Dual color print with single extruder, no need for MMU. In addition to the print, you will need : MKS DCL32, 3,5 screen and fan 16 M3 x 4mm threaded insert nuts 4 M3 x 12mm for fan 4 M3 x 4mm for board 4 M3 x 20mm for cover 4 M3 x 8mm for…
The greatest creation of mankind is here. Finally, the L3. Behold the epitome of engineering ingenuity, the L3/33 defied all expectations through its simple mechanics, and a level of mobility that could only be described as "too fast for…
Great idea how to easy and quick mount cleaning brush to the bed - I used mount from cleaning brush for adxl345 mount to the hot bed. Many thanks both of designers - Alehandoro VR and Rui Reis
Permet de fixer le ADXL345 Fysetc comme la sonde de nivellement. Fonctionne pour la V400 et la SR. Prévoir un aimant de 10x20x3mm (moi j'ai simplement coller l'aimant, mais j'ai prévu un trou pour le visser) et 2 vis M3x8 pour fixer…
A remix of mgrupe82's Adafruit ADXL345 90 Mount for Micro-Swiss NG , with a solder cutout and widened slots for screws to fit more board designs using the ADXL345 accelerometer besides the larger Adafruit model. Designed to be a permanent…
Use minimal 3 perimeters and as much infill as you like. The mount slides on the plastic lip behind the ribbon of the extruder. Make sure you to resize it if necessary so it fits tightly. The flat "wings" are for mounting it to the bed…
ADXL345 accelerometer V6 nozzle mount for input shaping. Couldn't find one which doesn't fall apart immediately, so I design a robust one myself. You'll need: 3 x M3 nuts 2 x M3x12mm screws (ADXL mount) 1 x M3x10mm screw (nozzle clamp)…
This design mounts the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) to the bed of the MK3S+ or any bed that is under 5mm thick. Use a…
Anycubic Vyper PEI ADXL345 Y-Mount Mount for KUSBA ADXL345 and ADXL345
Made a display stand for the gorgeous assault phaser by Voxel3. The indent where the grip rests is tight and is able to hold the pistol upright for me without needing the forward leg, but the leg just provides piece of mind. Buy prints of…
A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…
For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…
Remixed to use with Fly-ADXL345.
Mount your Kusba ADXL345 USB accelerometer quickly on probably any toolhead directly to your nozzle to get most accurate readings BOM (I used for my build) M3 20mm x 2 M3 6mm x 2 standard 5mm Threaded Heat Set Inserts x 4 Please let me…
Video: [Assembly, Solution] OVERVIEW: I designed this Puzzlebox in Blender. Its quite simple but offers some clever mechanisms. The Hidden room is about 80x35x20mm. Assembly Inscructions are available as a PDF. Let me know if you have/had…
Magnetic Mount for ADXL345 Accelerometer This design is a detachable mount for an ADXL345 accelerometer to be used with Klipper 3D printer software for measuring resonance for its Resonance Compensation (aka Input Shaper) feature. The…
USE AT YOUR OWN RISK - Sounds a little dramatic, however if you use this mount then the end-stop switch will no longer trigger. Instead, the ADXL will crash into the motor cover. To work around this, I just triggered the end stop myself…
Print with PLA on a flat side without supports, so it looks like an L from above. Use M3 or similar screws to mount the accelerometer to the part and itself to the extruder (check picture 1)
This is a cover plate for the emergency release latch on the passenger side door to help avoid unintended use which can damage the door trim. Recommend printing in PETG or other high-temperature material. For single filament printers you…
Batteriehalter aus altem Batteriepack einer Lichterkette ( nur die Pole verwandt ) Der Halter ist für Bananen Buchsen vorgesehen mit 4mm Gewinde, Damit kann man eine 18650 Zelle testen oder auch Laden. Die Batteriepole sind auf eine…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
I did not like the mount that came with the Stealthburner files since the X and Z axes were swapped. I redesigned the mount so that all axes are aligned. The mount attaches to the two inserts designed into the Stealthburner for this…
This design replaces the extruder idler with one that has mounts for the BIGTREETECH (BTT) ADXL345 2.0 accelerometer board (https://www.amazon.com/BIGTREETECH-Accelerometer-Klipp-er-Connection-Stealthburner/dp/B0CHJQ6CXF) for use with…
ADXL345 Accelerometer Sensor generic Mount on 4010 Fan
ADXL345 mount Ender 3 v3 SE Category: 3D Printer Accessories
Berserker mech from the game HAWKEN. The zip file contains printable parts. Legs, cockpit and arms are movable. For most parts printing with supports from bottom is adviced. I printed my make at 30%
You should need 2x m3x60mm to mount it to the stealthburner. i used M3x12mm with nuts to attach the mount the adxl. please note: voron stealhburner does support adxl mounts by default, check:…
The original dragon burner ADXL mount needs a longer M3 screw. so I adjusted the mount with a sunken screw hole that uses the same m3 screw. !!DO NOT OVER TIGHTENING!!
These are mounts for a Mellow Fly ADXL345 accelerometer for an Elegoo Neptune 4 (Pro) 3D printer. Compared to other mounts that attach to the back of the extruder they work for the non-Pro and Pro model. I've designed them to use a total…
I “remixed” the original extruder lever brace from https://www.thingiverse.com/thing:3935900 . Main reason was to be able to mount a ADXL345 sensor. I had to calibrate klipper3d with help of this sensor. You can just put the ADXL345…
Two versions of the bracket: With thread - for printing on an SLA printer No thread - for printing on an FDM printer BOM: M3*6 screw - 2pcs - I recommend nylon M2*8 screw - 1pcs M2 nut - 1pcs
This is a mount for the FYSETC USB ADXL345. It mounts easily to most Ender 3's and its clones (I am personally using this on a Voxelab Aquila). It mounts easily and securely to the printer by sliding it firmly onto the X and Y Gantry.…
Needs 2x M3 40mm bolts 2x M3 x 5 x 4 mm heat inserts 2x M3 6mm bolts
A mount for the Ender 3 S1 Pro and other models with the same print head to use the ADXL345 that comes from BigTree Tech. Mine came with he BTT-Pad7. Allow for mounting to the bed with a clip or tape, and to the side of the print head by…
Designed for Ender 3 V3 SE but will fit any 42mm stepper motor with threads. Use 2x M3x6 for the stepper holes, 2x M3x8 for the sensor (both brackets). Use a binder clip for the bed mount.
This mount can be used either on the printer head (with screws) or mounted on printer bed (with binders) There are 2 models - one for regular nuts and one for heat insert nuts. heat insert nuts dimensions - M3, outer diameter - 4.2mm,…
Modification of the https://www.printables.com/cs/model/597996-mellow-fly-adxl345-stealthburner-mount. You should need: 2x M3x8 2x heat insert 2x M3x60
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
Here is a single ADXL345 mount that can be attached securely and out of the way to the extruder stepper motor to measure your X resonance frequencies or to your bed using a binder clip to measure your Y resonance frequencies. Versions:…
Hi, I made brackets to test my Sovol SV06 Plus with standard ADXL345 chip, altered from my other PIS ADXL345 input shaper, so photos are visible there for now. All holes are measured for self tapping, no need for heated thread inserts.…
Range Rover L322 was introduced in 2001 and had a production run of over ten years. You can cut some parts in slicer and print larger wall arts. Let me know which next model you want to see.
a simple housing for the adxl345 sensors that can be quickly and easily attached to and removed from the printhead and printbed with double-sided adhesive tape. with the original, the contacts on the back were exposed and the two holes…
A Pi Pico 2040 case for those using a Pi Pico + ADXL345 as a portable solution for doing Input Shaper measurements with Klipper. Can accommodate 6 wrapped wires or a Cat 5 cable going out to the ADXL345. Dimensioned for PLA. Scale to…
Update 2024.06.19: Added a variant that can fit several models of accelerometer: BTT S2DW 1.0 (tested) BTT ADXL345 v2.0 (tested) Mellow Fly-ADXL345-USB (untested; should be OK in REV6) GY-291 / SparkFun ADXL345 (SPI) (tested) GY-521…
