Counting matching models…
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
Mein erstes kreatives 3D-Projekt: eine dekorative Ablage für meine Brille. Ich empfehle eine sehr feine Layer Height für eine möglichst glatte Oberfläche. Meinen Prototypen habe ich noch ziemlich lange mit Schleifpapier bearbeitet.…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
I made this filament guide to be used with a left-sided spool holder, also on my profile. Uses the original spool holder screws. Can be printed out of PLA. Doesn't need supports. (I'm not very good at designing these technical parts so…
Wall Mount - Side fastening system with security clip - Sistema di aggancio laterale per pannelli Recommended Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements All our designs are free to download and…
Weihnachtsgnom mit Laterne zum stellen und hängen! Ich habe die standard PrusaSlicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
A tall quadrilateral shaped building that I made for a gundam model diorama. Sharing for anyone to use! If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
Medical and chemical labs use lateral flow tests to test for the presence of specific compounds in a sample. You may already experience with this type of common lab test in the form of a home pregnancy test. This cassette is a holder for…
This lantern was designed for my 2year old to support different lithography plates. Inside is one LED candle so he can hold it. Lithophane´s can be converted here: https://3dp.rocks/lithophane/ and need to be: 135 mm * 84 mm * 3 mm (as…
This model is compatible with the lego system.
I use 3D printed clips for all my Samla boxes, and I loved this one: https://www.thingiverse.com/thing:2110134 Unfortunately, IKEA has redesigned the lids for the Samla boxes, making that clip useless :( Luckily, I have modified it to fit…
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
This is a remix of a bed plate holder I found and the connectors for the HSW. I honestly didn't spend much time on this and it needs several optimizations…. the connectors could be down at the bottom so you could print it without…
Repaired and improved versions of coal load for Coal Wagon for Wooden Tracks from Michal Franta . The motivation for making this remix was the wrong size of coal load in original Coal Wagon from Michal Franta. This model has right…
Según los manuales de ensamblado, se sugiere que el cable del extrusor vaya por detras, apoyándose en un clip que va sobre el motor izquerdo de Z. Lamentablemente esto ocasiona que el cable se doble y deteriore cuando el extrusor hace…
This is my version of the Deutsche Bundesbahn red light train lantern fitted to the end of goods trains exetcuted in gauge 1 (Spur 1 / 1:32) For illumination of the lamp, I've ground the end of a 5 mm red LED flat. It fits perfectly in…
Deutsch im Anschluss. This is my remix with many changes for two button boxes to play Simulater games (blank faceplate included for your own design). A sun visor is optionally included (please use optional gasket with mount). The original…
O-ring failed on my portable 24v inflator and i found the problem to be a bad seal on the pump. Its a tight fit but work. Use as many perimeters as you can and .16 layer height.
I made this left-side spool holder to be used with a filament guide, also on my profile. You will need a couple of screws and bolts. Can be printed out of PLA. Needs supports. (I'm not very good at designing these technical parts so feel…
This model is compatible with the lego system.
I had wanted to have access to boot, reset buttons and pins at the same time. So I decide to make lateral support. Since there is no much space for screws, there are pins (only in openScad version) that since they are very small, they…
Holder for an iPhone 13 ProMax that fits into the slot in the dash on the passenger's side. It can be mirrored in your slicer if you need it for the driver's side. The fit is tight so the phone will not vibrate. There is a slot in the…
East to print Christmas Latern This design can be used as ornament if you scale it down. Whatever you put inside for light is at your own risk Be aware that PLA and all the plastic that we use in printing are flamable It would be better…
This is the rear air filter housing that should fit K2 and later CT90's and maybe CT110's.
Soporte para tubo de cortina. Diseño de gancho y soporte en "U" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.32-0.48 mm Infill: 15-20 % Filament: Jamg He PETG Grey Category: Household Supplies
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
A really excellent model to provide additional large cup holders for Mercedes Sprinter Vans. This works with any late model Sprinter, and RV vans like Revel, Terrain, Launch etc. The mount is separate from the cup holder and is attached…
This new component provides direct support from the bracket to the floor, accommodating the footprint of the Anti-shake construction base. Without a doubt, the Vanilla MKGRL lateral spool holder bracket is what I was looking for. However,…
A square-based pyramid where all of the edges are the same length.
Essa grade protetora do cooler lateral, ela além de proteger o cooler de entrar filamento dentro dela ela também protege a hélice caso aconteça acidentes com a impressão e ela suga o ar da cabine de baixo para cima. Eu fiz com carinho…
Modded for a new X1C chassis. Printed / tested.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Sie brauchen ein holes 8mm Alurohr
This is a remix of my Cable Tie . On this one the tie is set upright . It has 2 advantages: you can make the cable tie almost any length. Fusio360 provided here you can see how easy it is to change the length in Fusio360 (resizen 2/3…
Just made a remix that fits my skadis plate. Note: Added v2 - I placed one of the pegs wrong.
This is a Halloween pumpkin or Jack O'Lantern for LED tealight. You can print it out as a single part, which then requires a lot of support. Or you can print it out in two parts, which saves a lot of support and material. At the top of…
This has been superseded by https://www.thingiverse.com/thing:3833402 This is a Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.2mm radius ball to…
This is a NYC, then Penn Central concrete arch railroad bridge, described at the following link: https://historicbridges.org/bridges/browser/?bridgebrowser=michigan/oakwoodsmetroparkrr/ This bridge is located in a lowland hardwood forest,…
This was designed for wire shelving from ClosetMaid with 1" wire spacing and ~0.13" dia coated wire, may work with other manufacturers. Printed on Bambu Labs X1 Carbon using matte PLA and the stock “0.20mm Strength @BBL X1C" build…
This is a filament guide for Anycubic Kobra, ideal if you have a filament holder on the side of the printer, or in my case a dryer. It guides the filament from the side, and can be mounted in the two holes on the printer sides of the…
Inner tube/tire deflater This is a simple tool that I use to let the air out of bicycle inner tubes after I have patched them. Also useful when removing the tire from a bike in the case where the tire won't pass between the brake shoes…
Helloween Laterne, gruselig schön. Auf der Innenseite wird Transparentpapier aufgeklebt und LED-Betterieleuchte oder ein Teelicht als Leuchtmittel eingebracht. Oben sind zwei Ösen für die Aufhängung am Laternenstab oder als Vorrichtung,…
Fairytale (Christmas) birdfeeder or latern 20 cm (one colour) In translucent white it looks like covered in snow. I printed it in PLA and is came perfect and without any problems. Just be very careful in postproduction process because the…
It is long, long print. But it is worth it. It is for big printer if you want to print it in one piece. Scale up it freely according to your needs. Do not scale it down. The latern is of electric candle only! Do not make it fire hazard!!!
Remixed to make the hole sizes larger, as mine didn't fit in several ways. Road pieces now 5.7x5.7mm Town pieces now 15mm wide Castle pieces now 42mm long Category: Toys & Games
Printing Instructions: Material: PLA Nozzle: 0.4 Infill: None Perimeter: 6 Top and Bottom Shell: 0 Leyer Height: As you wish, I recommend 0.3 Make sure to keep the perimeter to the point where you have the little gab as shown in the…
This garden light can be used as a floor, wall, or hanging light. It is approximately 40 cm high, making it a full-size fixture. It is prepared for an E27 socket. Please use only LED bulbs (otherwise, excessive heat generation is…
Laternenhalter / Laternenstab / Sankt Martin / Leuchtstab Stabiler Laternenstab mit 18650er Akku und USB-A Licht. Kann individuell in der Länge variiert werden. Das müsst ihr noch dazu kaufen: - 18650 USB Ladegerät…
tronco di legno cavo all'interno e terminale da incollare
A easy to print and useful manipulative model to aid teachers teach trig concept. It is colorful and easy to read. Printed in three levels 1) for angles 2) for base (allows angle measurement to show through and 3) shows the two (2)…
Equilateral triangle
Adapter to inflate other things with Intex spa compressor. I used it to inflate a Intex baby pool. Print without supports.
28 Days Later - Fleeing the Flaming Infected - 2002 3D printable model. Two sign options. You can print and finish one sign by painting, or I've included a blank sign and an image you can print and glue to the sign.
Feeling cute might die later plant sign scale as needed but keep z height to 4mm
The Lunar New Year is this weekend and I wanted to try my hand at making a decoration for it. I actually did this print at 50% scale because I'm currently having issues with my printer and cant manage longer prints. I did this in vase…
This is an updated version of my previous inner tube deflation tool. I added threading to work with Presta tubes. This tool is handy while doing bike repairs when you need to deflate a tube to remove a tire, reposition the stem, etc. The…
This tool is for marking holes in corners that will be drilled later. This tool removes any guesswork from measuring or eyeballing corner holes. Just use a sharp pencil to mark your hole and drill later. Below are example of how I used it…
This is an adapter to use air compressor ¼" NTP fittings to inflate inflatables. No support required. Rigid filaments work fine. TPU even better for some bit of flex. I installed the NTP fitting with the adapter in a vice so I could fully…
Hallo, ich habe mal eine Laterne gezeichnet. Dafür nutze ich 50 mm lange LED-Streifen. Das Kabel kann in drei Richtungen herausgeführt werden: vorne, unter die Schiene, direkt unter die Laterne oder nach hinten. Zum Schluss muss nur noch…
What does the title of this mean? Bilateral symmetry is where a pattern repeats left to right, but not radially. So, this top looks very different staring down the X axis than staring down the Y axis. Even so, it is very stable and spins…
Einfach einzuclipsende Halterung in Doppelstabmattenzaun 8/6/8 erstellt für Modell “Qedertek”. Rohr-Innendurchmesser der Halterung 14,2mm so dass alle Stab-basierende Solar-Lampen für Rohre mit 13mm-14mm passen sollten Neigungswinkel…
This requires two additional pieces of hardware per nozzle: A 3030 M3 Spring Ball Nut An M3x16 screw To install: Insert the spring ball nut a bit to the left of the tool dock, with the hole towards the right. Insert the nozzle brush…
Die perfekte Geschenk Idee! <3 Diese zwei Varianten haben je eine Aussparung für Batteriefächer. 1.) Die "Big" Variante ist für Lichterketten mit einem Batteriefach von 8cm x 5cm x 2cm. Diese sind für Bilder mit einem Maß von 115mm x…
Since many of my friends own the 18V Makita battery system I thought of a practical Christmas present for them. I got the idea for the basic platform from user "bitplusatoms" with his design "Makita Battery Mount" (…
I rearranged/repositioned and rescaled the model to fit to my Prusa Slicer. - - - so now it fits to the printbed in the slicer previews - you have only to load the file into your settings and have no further circumstances - - -…
Suitable for pots upt to 192mm x 145mm and 50mm deep, this is how they come at my local garden center. How knows if that is somehow standartized? I recommend to print the bowl with 3 or more walls and solid bottom, after all it needs to…
Kleine Laterne (85 x 85 x 140 mm). Die Bilder sind auf der Rückseite der Scheiben gedruckt. Die Flächen der Scheiben sind nur eine Schicht (0,2mm) dick, die Rahmen der Scheiben sind 3 mm dick. Die Bilder habe ich von pixabay als…
A clean and simple geometric model, the Triangular Bipyramid is formed by mirroring two equilateral tetrahedra at their bases. This design is perfect for educators, geometry enthusiasts, or anyone looking for an elegant display piece. Its…
The lantern light diffuser is designed for an iPhone 15 Pro, but can also be placed on any smartphone. I printed it with a glow-in-the-dark filament. When the light is turned off, the lantern continues to glow. Perfect for any camping…
This is a part of our Gomorrah Idolaters project! Subscribe to our newsletter and get this model for free: https://www.dakkadakka.store/gomorrah-idolaters Kickstarter pre-launch page:…
Plumbing Wall Faucet Mounting and Leveling Jig are simple tool for preparing your kitchen- bathroom plumbing between 100 and 150mm . Leveling easy and always exackt . can be used as jig for faucets , example in shower or also with HT…
Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…
Windproof buttons for standard mosquito nets to be mounted on the side parts of the net.
Die Halterung lässt sich in eine PET Einwegflasche Kleben. Diese solle natürlich davor kunstvoll verziert werden. :)) → Für Anregungen sucht einfach nach “Laterne aus PET Flasche”. Anschließend kann an die Halterung entweder eine…
Die Lampe ist von einer Japanischen Straßenlaterne inspiriert. sie wird ohne Support in Pla gedruckt. Für die Lampe habe ich eine E27 Fassung am Boden festgeschraubt. Link zur Fassung https://www.ebay.de/itm/311414925463
Sovol SV08 Side Filament Roll Required: -2 M4 screws larger than 10mm -2 M4 screws larger than 15mm IMPORTANT: use 2mm nano tape
Inflater plug to prevent vacuum loss when not using.
Attention This project is still a work in progress and is based on a MFT 800 work bench. While I have printed and tested all the files, there may still be issues, If you notice anything amiss, please let me know so I can address it. Not…
This model is compatible with the lego system.
This model is compatible with the lego system.
He diseñado este porta carrete, para que se pueda poner en el lateral de nuestras impresoras, decidí hacer este diseño por que es incomodo tenerlo detras de la impresora y porque al tener el monitor del ordenador a la derecha de la…
Japanese pattern lantern proTip: Print walls directly onto paper
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
print x2 halfs in TPU with all walls for each end of arm. remove old crush tube from worn rubber bush and remove old rubber from steel shell of old bush. DO NOT REMOVE STEEL SHELL OF OLD BUSH FROM CONTROL ARM. Remove the rubber, push in…
Quelques améliorations du modèle original : Agrandissement de 102 % pour une meilleure fixation sur le Dyson V7 Allongement de 10 mm de la longueur de l’embout Fente d’aspiration coupée en biais Ajout de deux renforts dans la fente…
I had a dust daddy laying around and make an adapter for my dyson vacuum. Outer diameter is 34mm.
Taking these tests has become part of life for some people, so I wanted a way to keep the stuff together.
Includes 5 height variations as well as a No Support version. With enough cooling it is possible to print the regular version with no supports as well.
Sorry for the English translation. It is made with the google translator. Puse el soporte original en el lateral de una mesa ikea malm, ya que por funcionalidad, no podía ponerlo ni en la pared, ni en la parte delantera o trasera de la…
A lateral locking mechanism that can be used to lock two components together. The lock and insert have room for round 4x1mm magnets that can keep the lock in the locked position and provide tactile and audible feedback when locking the…
Laternenhalter für Balkon-Scheibe NUR FÜR BATTERIE BETRIEBENE ABS Gedruckt. ABS Getestet, funktioniert gut. Empfehlung: ABS 30 - 100 % Infill je nach Gewicht. Für z.B. sonnige Außenbereiche bitte kein PLA benutzen, da sich dieses dort…
Easy to print witch with latern Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
lateral furniture gadgets holder Rafts: No Supports: No Infill: 20% Filament brand: X Filament material: PLA
