104 models
Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…
Akkubox für Goldhofer Sattelauflieger mit Deckel im Maßstab 1:14 zur Aufnahme eines Standardakkus, Zusätzliche Aufnahme für eine Servonaut-AMO-Elektronik. Der Deckel wird mit Neodym-Magneten (5 x 3) gehalten. Dafür ist in der Akkuwanne…
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
Awareness Earrings I print all my earrings and keychains with a .2 Nozzle Layered. No AMS/MMU/Ace Needed. Just color swap at layer. Can be made into a pendant and/ or Keychain by scaling up. Check out my large selection of earrings .…
Designed some 3D printed Oldham Couplers for my Ender 5 Plus. The ones available didn't match up with the bolt pattern on the 5 Plus' lead screws. Suggest Printing at 100% infill with 0.12 layer height and 4 walls. Uses M3x8mm to attach…
Two base pieces and one middle piece are needed for a single lead screw. An additional two M3 screws are required to hold one of the ends on the X-gantry bracket and the other with the lead screw nut. Some slight sanding and silicone…
Anpassungsbedarf! Nach einem ersten kompletten Druck mit PC Blend und einer vollständigen Montage habe ich einige Defizite festgestellt. So liegt der Auflieger etwa 3 - 4 mm tiefer, was nicht zweckmäßig ist. In Verbindung mit der…
I wanted to make the 3D model of this iconic lorry for a very long time :) Toy car competition put pressure on me, so there you have it. I hope you will like it. My sample is printed at 25% (7 cm long). Sand where necessary.
Locomotiva Faur LDH 18, zisa si clasa 88 a fost produsa in peste 100 de exemplare la fabrica Faur (Malaxa) din Bucuresti. Acum orice modelist din Romania si-o va putea tipari 3D la o imprimanta cu rasina. Pentru asamblare va mai trebuie…
1/87 Goldhofer 4 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
1/87 Goldhofer 6 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
1/87 Goldhofer 5 axles trailer / Printed with 0,25 nozzle on Prusa Mini+
Caution, it has sharp edges! You will need: M3 Tap e.g. Right Hand Tap Drill 6 or 8 pcs - M3 hex socket head cap screw How to print: CURA PRUSA (I'm not sure) Print Settings -> Advanced -> Slicing -> XY Size Compensation Infill ~ 50%…
I am a neatfreak. So I needed something to carry around all my “Star Wars - Legion” tokens. Either ziplock bags, or .. this. It is specifically designed to fit in a Feldherr Mini Transport box. I do no know, if I can post the link here ……
This is a big one, designed to be printed on a large bed printer 300x300. There are cut outs for LED lighting and a microswitch in the trigger. Magnets holes in certain parts, such as the bullets, top loader and magazine (On some you'll…
A (2021 )Oldham kinematic ring design dedicated to the BRS Z-Upgrade I and II ballscrew Z, More precise, more accurate. Compatible with WobbleX from Mellow Extensive credits:…
So its a modified Sean Fields mudtrooper E10m with options for resin print and fdm parts (scope/counter etc) There is also options for additional side rail and cattle prod rail as these were seen on Andor also . Thanks goes to Project 842…
Schönes Geschenk zur Eisernen Hochzeit oder zum Geburtstag. In das Loch passt ein Reagenzglas, in das man Blumen rein stecken kann oder man steckt einen gerollten Geldschein rein. Seid kreativ! 25 Jahre -…
Note: For the X-Max (X-Plus), the same reduction of lead screw induced wobble can be accomplished by removing the bearing at the top of the lead screw And using the stock couples. This applies for 75% of the max print height. For prints…
This is a simple printable spacer to fill in the gap left when you move your stock POM leadscrew nuts onto an Oldham coupling. The spacers fit below the Oldham coupling creating a flush surface. They have a 10mm hole to allow the…
After seeing these online and a few for other model printers, I decided to make one. It comes in 3 parts, a top and bottom and middle. I have seen another on here that uses a dovetail slot like the commercial ones, but I couldn't get the…
Print it with either with support or with a good printer which is able to bridge the upper frame properly
Remix of Derrick's oldham coupler mount with the manually adjustable Z. This is for anyone not on triple-Z.
Based on Henlor 's masterpiece. Designed for Mellow's/VzBoT's T8 Oldham coupler (22 mm diameter). BOM for one carriage: 2 x M3 standard heat insert (M3x4,6x5,7) 2 x M3x6 I used PA6-GF25 for V1 and managed to press the bearing into the…
i try coupler from EB3D_Printing and found that it really good. But it introduce a little bit backlash and too much friction to move freely with leadscrew . So i add a slot and put half of ptfe tube that i got from old bowden tube. and it…
Nachbau der Felgen für den Carson-Auflieger im Maßstab 1:14, bestehend aus einer inneren und einer äußeren Felge Es sind noch drei Schrauben erforderlich, um die beiden Felgen zu verbinden. Zudem sind zwei Kugellager erforderlich, um die…
Inspired by DerrickDarrell 's Oldham coupler mount but with the manually adjustable Z axis. Based on @JEng CAD files (V2) and drawn from sketch - still in STEP files. Tolerances checked according to JEng's files based on Henlor 's…
LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates and screws, no…
Brass Oldham Coupling to suit T8 linear screw
extra 2 m3 bolts,nuts and grease oil required. This oldham parts can reduce your z wobble a lot. Make sure your belts are tight tolerances 0.03mm. Also move z seam outside if you can. 2 bottomandtop and 1 middle required. Print Settings…
Oldham Coupling is a very interesting solution to couple paralell (but not aligned) shafts. This is a very easy model to print (best with PETG filament). Please read the PDF for instructions.
This is remix of: https://www.thingiverse.com/thing:3108999 Edited to use heat inserts or nuts instead of reverse bolts with nuts. 4 variants: 0.1 offset and no offset of coupler, 3.8 and 4.0 external diameter of offsets
Ich habe einen Bilderhalter designt um ein gerahmtes Bild aufzuhängen. I made a picturehanger for a wooden framed picture
This coupling is used to transfer torque from one shaft to another misaligned shaft. Print instructions The prince doesn't require any support structures. Just print all attached files and assemble them. You might require 2 grub screws…
I liked the idea of using the feldherr mini case for legion tokens. I wanted to take it a step further and made some changes so I'd be able to take all of my army accessories and be able to sort them during a game. I redesigned the card…
Dieses Modell dient dazu, mittels des Lenkkeils und der drehbaren Platte den Lenkwinkel zwischen Sattelzugmaschine und dem Goldhofer Sattelanhänger an das Linearpotentiometer von HAMAtronic an die entsprechende Elektronik zu übertragen.…
This is my first try in photogrammetry. I didn't have enough time to make more photo. The sculptural composition "Childhood" It is a children circling in the dance, which symbolizes a happy childhood. Weight 800 kg. Opened June 1, 2012…
https://www.aliexpress.com/item/1005004774222097.html This adapter uses threaded one made by Trianglelab.
Update - 8/5/23: Should work now expanded the holes to allow for more coupler movement, and fixed the rear hydra arm connection to the rail. You must use button head screws to attach rear to rail. If it still isn't working don't hesitate…
Enhance Your 3D Printer's Print Quality with the Z-Axis Screw Oldham Coupling Adapter! Introducing the Z-Axis Screw Oldham Coupling Adapter! Encountering the same challenge, I devised a clever adapter to align my mistakenly purchased…
This is an experimental compliant mechanism that replaces an oldham coupling. The 3 layers of the sandwich each serve a different purpose. NOTE: This will NOT work with the stock extruder. Try at your own risk. The top and bottom layers…
Remix from https://www.thingiverse.com/thing:2792315 its edited to fit for this setup https://www.thingiverse.com/thing:2334406 intermediate and center are the same as original designed by Maxdarkdog Print Settings Printer Brand: TEVO…
More variations incoming!
I saw this nice scan by thelongrunsmoke that wasn't completely ready for 3D printing yet: http://www.thingiverse.com/thing:1595529 I fixed some errors, smoothed and modeled the mesh a bit and scaled it up with MeshMixer. https://www.3dwp.nl
Original descriptions: Two base pieces and one middle piece are needed for a single lead screw. An additional two M3 screws are required to hold one of the ends on the X-gantry bracket and the other with the lead screw nut. Some slight…
Nummernschildhalter für den Metz Moover E-Scooter, da braucht man das Kennzeichen nicht mehr auf den Kotflügel kleben. Gedruckt ohne Stützen in Prusament PETG
Habe es in Tikercad erstellt, es ist universall ändere bar. das teelicht ist von dochtmitte ca 7cm weg.
Hello everyone, Update1: Added multi-ST Please share photos of what you've created. I'd love to see how cool they are. Follow us to make sure you don't miss out on these discounts. Introducing Urban Bunny Bugs' Childhood, a new…
This Oldham coupling is made with a dovetail profile to constrain the vertical movement. If used with a lead screw, it would be better to install the nut with some springs to free the tilting movement of the screw. This is originally made…
Famous Coldheart, because my D2 clan made me do it.
Dieses Modell dient dazu, mittels des Lenkkeils und der drehbaren Platte den Lenkwinkel zwischen Sattelzugmaschine und dem Goldhofer Sattelanhänger an das Linearpotentiometer von HAMAtronic an die entsprechende Elektronik zu übertragen.…
This model of Galdhøpiggen is created in scale 1:50 000. Diameter size of model is 90mm Sockel for the model has a diameter at about 100mm I usually print the mouintain model standing in a 75% angle. This is to avoid all the horizontal…
This is the adapter to mount the Oldham couplers to the Z axis of the Shappire plus or sp-5: -We will need 2 printed adapters, I did it in ASA at 4/5 perimeters and gyroid 25% -4 m3 brass inserts from ruttex on Amazon for each piece -And…
The more you print, the better wildlife like it ! Print instructions How it started First that will be cool to have a beehive made out of Prusament spool. you know the hexagonal shape comes to us from the bees after all But deception,…
Fair Warning! This mod is not plug and play. It involves sourcing multiple parts, having additional standard hardware, partially disassembling your printer (a not insignificant amount of disassembling at that), and and either drilling two…
This remix is for an Oldham coupler adapter with an 18mm center to center distance with heat set inserts.
in this modification you don't need to limit the maximum print height
Unlike the other mods out there, this does not require a full rebuild and new motor cage etc. the pomnut is inserted upside down, this results in a limited DoF in the y-axis but it should still be enough. it also integrates 3 holes to…
Ein Adapter für eine Oldham Kupplung für den Sv06 Plus. Während des Drucks auf Layer 16 wird der Druck gestoppt und 5,4er Muttern eingesetzt. (Vorsicht nicht für den Sv06 da die Lochabstände nicht stimmen)
The spring based oldham coupler on the ender 3 ng is interesting, but I don't see a bed slinger version of it. Now we do. Dimensions are a bit different so you probably need to mod this to use it. The direction with longer gap flexes much…
This design will eliminate Z-Axis wobble. At least it did for me. It also eliminates the risk of damage your hot-end, bed or glass surface in case of a z-axis sensor malfunction. First, the Story. If you don want to know "WHY", then go…
Beleuchteter Lithophane Bildhalter für Bambulab USB LED licht Einer ohne Nut zum Selber anpassen und einer Mit Nut für Itslitho Standart ARC mit einer Breite von 180mm.
Aufhänger für zB. Bilder, wird an der Rückseite des Bildes geklebt (Kleber oder auch doppelseitiges Klebeband). Die Runde Fläche hat einen Durchmesser von 5 cm um ne große Klebefläche zu bieten. Bevor die kleine Abschlussfläche gedruckt…
Replaces foam insert in Feldherr Backpack. Made to make carrying dice, tokens, and cards for gaming.
LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble with SFU1605 I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates…
These height adapters are designed for the Ender 3 V3 SE to provide proper clearance when installing Oldham-style Z-axis couplers. The models are not symmetrical — the left and right sides of the printer (as viewed from the back) require…
So, I needed to store a full OnePageRules army in a Feldherr Mini Plus. And I found the original model . As I am a programer but I never used cad, I downloaded the file, OpenScad, and started to make changes to create a structure to…
Tallest mountain in Norway. Print instructions Tear off corner ears after printing.
I created this on a user request. At the moment, this is untested! This mod adds F8-M16 thrust bearing blocks to Sir_Washes Hydra Oldham Coupler mod. Stepper motors are not designed to take axial load. With the weight of the bed pushing…
A simple holder for Stanley containers in order to make them fit in a Feldherr bag
Shout out to all the kids who go to Lyceu, hope you can make this model better and use it in your games or 3d prints or anything you want, it's all Public Domain. I'm adding the other two buildings.
These are custom port ratios for Haroldhihat's Thunderbolt! This pack Includes 4 port, 6 port, and 4/6 port. no instructions needed since they work the same as the original choppers.
I had an Anti-backlash kit that was not compatible with my Oldham couplers. Even though I had them both installed, it was not perfect. I decided that I needed an adapter to use both properly. The adapter wraps around the top of the Oldham…
i made this oldham with a lot of modifications from other options online, first thing i did was designing the space for m3 inserts as i think it's better than nuts, second thing was making the middle hole bigger, so the movement that the…
Oldham coupler carriage for the k1 that pressure fits the bearings
☀ Remember the sun we all used to draw in the corner of the page as kids? I turned that simple childhood drawing into a real 3D-printed LED corner lamp . The lamp is designed to fit a 90° wall corner and can be installed on either side of…
Important Notice A new version with various improvements is in the works. Should address various minor flaws with the current model that I've been running so far. Z-Axis Blocks Custom Z-axis blocks, supports oldham couplings on the bottom…
Fence fastening for a sign 20x30 cm. You will need 4x washers M4 (Din 9021) 4x screws M4x10 (Din 912) 8-12x screws M4x16 (Din 912) 12-16x hexagon nuts M4 (Din 934) Zaunbefestigung für ein Schildt 20x30 cm. Es werden benötigt 4x…
Remixed the rear bracket as the original hangs over the aluminium meaning you can't add an oldham coupler if you are running a dual z setup. This is essentially the same bracket with a 5mm section chopped off the bottom I use this oldham…
i did this simple holder to place a shield on an carport. the gap to hold the shield is 3mm and the gap to hang it on the carport is 3mm. The holder can hold shields with an height of 130mm.
Druckfertige Datei mit 0,4mm Düse die Teile sollten beim Zusammenstecken sicherheitshalber Verklebt werden. Diese Rahmen sind so Konstruiert das sie in Höhere Euroboxen Gestapelt werden können. Die Ecken 1B sind ohne Führung so das der…
I had already printed and installed thingirob excellent Tevo Tarantula Brackets , but needed to deal with more z-wobble than the z-mod provided could deal with. I ended up printing Elzariant 's very nice Oldham coupler only to realize too…
Was fitting Projunk's Proxxon MF70 CNC conversion kit, but couldn't find a suitable flex for the couplers and/or coudn't get the alignment of the couplers right. Used the original coupler as a model for creating a split version which…
Remix to use 24mm oldham coupler and more space for it to move.
The original oldham coupler does not fit 3-Wheel X Brackets because brackets are 5mm thicker than default ones. This oldham coupler is 5mm cutted version of https://www.thingiverse.com/thing:2039498 So you will be able to use this oldham…
Hier die 4. Version mit nur noch 2 Schrauben und auf der anderen Seite Scharnier. Schildhalterung für ein Mädchen dem der Unterarm rechts fehlt um ein Kampfsportschild zu befestigen. (passt zu Armhalterung)
Model size: 158x140mm Screw to screw distance: 128mm Screw to top/bottom: 32mm / 108mm Print with Wall Thickness 3mm and * NO SUPPORT* for best results. On my printer it also helps to increase Line Width by 5% if printing structural…
Trouble with assembly complex Wooblex? Expensive metal parts? Ball bearing flying away? Magnetic holding weak? No more gimmick. print this simple Old ham Wobble . All you need is just some M3 bolt and you can see the z band disappeared.…
⚠ This is USELESS — a pure desk fidget, just for fun. It holds nothing, organises nothing, improves nothing. Print it only because spinning two offset shafts at constant velocity is mildly hypnotic. A working demo of the Oldham coupling .…
Three-piece radial misalignment compensating coupling consisting of two slotted hubs and an intermediate floating disc with orthogonal driving tongues. Трехэлементная компенсирующая муфта для передачи крутящего момента при радиальном…
Fence fastening for a sign 20x30 cm. You will need 4x washers M4 (Din 9021) 4x screws M4x10 (Din 912) 8-12x screws M4x16 (Din 912) 12-16x hexagon nuts M4 (Din 934) Zaunbefestigung für ein Schildt 20x30 cm. Es werden benötigt 4x…
MECHA SERIES This models is a part of my MECHA series of main SV06+ Components. Z-Axis Blocks Custom Z-axis blocks, supports oldham couplings on the bottom or stock configuration on the top. Uses M3 heat-set inserts (henceforth referred…
Hier hab ich eine kleinere Ecke erstellt, 4mm Plexiglas kann man in die Nut stecken. Ist gedacht für einen Freund der ein Bild aus Plexiglas hat und dieses nicht anbohren möchte. Here I created a smaller corner, 4mm Plexiglas can be put…
Some oldhammer guardsmen that i found, good for building retro armies Have fun Category: Games
![Art Deco High School with Interior, Perimeter wall, and Fieldhouse with interior [WIP]](https://media.printables.com/media/prints/321336/images/2774682_cd5f61d8-14c1-469f-927c-7031deed64c1/lyceu-wip.png)
