107 models
This hook is designed to secure a Velleda whiteboard to a Skädis board. It is to be used with https://www.printables.com/fr/model/907314-skadis-reversed-hook so the whiteboard is held correctly to the Skädis board.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Náhradní díl pro venkovní sušák na prádlo Vileda
Print approx. €12.03–€14.70 excl. taxPreliminary estimate for PETGSource material: PET
I printed this lying down - you might need some supports but otherwise it will break as the tension is in the direction of the forces..
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Hook and broom/mop holder for the Vileda Origo 2 Cleaning Trolley. You might have to clean up the edges a bit after printing, as it is a tight fit.
Print approx. €5.59–€6.83 excl. taxPreliminary estimate for PETGSource material: PET
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
The source marked this model as adult content.
It is a gear model that has a one-way bearing for the Vileda Turbo mop.
Passt für Stangen mit 12mm
Nothing to be proud of here. Quick and dirty STL mashup in Tinkercad Massive thanks to Cornflakesninja and conanh for their design. https://www.thingiverse.com/thing:16274 https://www.thingiverse.com/thing:3730964 Currently printing, will…
This is a coned threaded connector bit that matches up with a mop rod from Vileda, (and possibly other brands) making it so you can attach anything you want to an extendable mop rod. Very handy for various things that you can think of…
This adapter lets you use the Vileda mops with the proprietary attachment system on the Vileda mop handles that have the threaded end. I made it for myself as a challenge after I bought the wrong type of mop for my handle. Works well…
I remixed this nice wall bracket specifically for the Vileda 1.2.Spray mop. I made the whole bracket larger so that the jaws were wider, to accomodate the mop handle diameter. I also made the base deeper so that the mop is held further…
Beschreibung: Befestigungsschraube- und Mutter für das Kehrteil zum Vileda Superfeger. Kommentar: Die 3mf-Dateien sind geometrisch identisch zu den STL-Dateien, beinhalten jedoch bereits variable Schichthöhen. Druckeinstellungen:…
Tolerances are quite tight, some sanding may be needed (especially on the smaller hole). The attached tool may be used to ease the disassembly of the dryer.
Inspired of the famous Jörg Sprave and his “sixneedler”, i created a simple version of the darts for 4,5mm (.177) airguns. I printed it from TPU one at a time with random seam. Looks ok to me :-) The maximum powerlimit here in germany is…
I got a new mop head and realized it didn't fit Vileda mop handle that has a proprietary conector. So I designed, printed and fitted this adapter. PLA will not work. Use PETG, ABS or similar material. I printed in PETG and it works…
Mocio Vileda Adapter 2.0 NEW DESIGN! EXTRA STRONG! Enjoy your mop with classic floor sticks! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 100% Filament: Sunlu PLA + Black Notes:…
I had some Mop heads with a conical screw and added that to the Vileda Adapter from Alfredo on thingiverse
Saint RAAMon of Vuhledar Slava Ukrani. Yea. Its Saint Francis…more than likely he would not approve. Fully aware of the suspension of decorum and magnification of cognitive dissonance.
You have to take the Wing off after that remove the caps with a screwdriver or knife then push the original disassembly tool inside the hole in the middle and then you should be able to take of the foot. The printed part should fit if…
This sleeve is simple solution to prevent breaking of gear wheel for Vileda Turbo mop bucket. If you need gear wheel replacement print this one: Gear wheel replacement for Vileda Turbo by Marvin27 | Download free STL model |…
An adapter for using a Swiffer duster onto a Vileda rod to make cleaning a bit more comfortable. You can simply screw the adapter onto the rod and start cleaning the ceiling or something that's onto the floor.
To save space I have designed a holder for Vileda which is attached with two screws to the inside of the door for the storage room. It holds really well despite the PLA and saves a lot of space. I recommend choosing a dark filament color…
I made two files with different diameters, one with 25mm for Vileda mop and one with 22mm for a no name mop. PLA 15% infill, no brim, no support.
Use the unused space on your clothes rack to dry your socks. See picture and 3D Model for more Details. More pictures are coming
Hi Everybody First cut the tip of the stick with metal saw. Install the reinforced connector and stick with epoxy glue or Japan Glue. Force the stick to the vileda head to install. This design prevents the rusting of the stick tip as…
Ersatzclip für die anclipbaren Lappen an einen Viledawischmop
A wall mount for the Vileda spray mop. Unfortunately, the spray mop does not come with a wall mount, but I have now designed one for this. The holder is available in two versions, one for gluing and one with two 4mm holes for screwing.…
Two different hooks that fits on a Vileda mop rod. In my case I use the hook/pusher to open and close my Velux windows. Since the people who built the apartment thought it was a splendid idea to but the window handle/bar almost 3 meters…
Hi, this is a model I made for the Vileda mop it's a replacement handle because the original broke - snap fit, so the fit might be a little tight at first - no supports required, depends on printer
Power cord clip for Vileda Steam Mop - no more stumbling upon power cord when using the mop! Use as many clips as you find suitable. Print instructions Using Brim (included in G-code) probably not needed.
Material: PCTG Suport: Yes (I use tree support) Nozzle diameter: I use 0.6 Screws to mount M4 L40 with trapered head.
With every Vileda drying rack comes just ONE sock hanger with 10 slots (which is a bummer, not a single person will ever have only 10 socks/panties). My version has 11 slots, which are a little bit more tight so that they can hold thinner…
Semi oval shape protective feet for e.g. ironing board. Pipe dimention ~18.3 mm . Angled wall so it catch it good. Big stand area but also big angled stand area (wider). I have printed in draft mode for speed. Change to more precise if…
impression sans support remplissage 20% gyroïde en PETG
Wing Holders for the Vileda Soft Care plus drying rack. Designed to be similar to the original parts. To close the wings fully it might require slight adjustmens to the plastic components of the drying rack due to the increased size of…
Slider of Vileda ironing board. Board repaired- wife satisfied ;) . Printed from PET-G.
Bought a Vilda handle, and a Vileda mop, without realizing that they were not compatible. One had a conical threading, the mop had a proprietary plug “click and use”. Be careful, this adapter may damage both the handle and the mop . This…
Top grip on the floor sweeper just shuttered when it fell exposing a thin and sharp end of the handle. Made this quick and simple design and it's easy to print. Vileda Universal handle is 21,2 up to 21,45 mm in diameter, not perfectly…
Vileda Heavy Pasta Stand I needed a stable pasta stand that was heat resistant, so I recycled an old stick from a mop (from Vileda). The rod had a diameter of 21.48mm. For the mounting ring I used a 3mm Bold and drilled a hole through the…
We needed a solution to reach the higher parts of our Windows. I think originally that Window Cleaning / Squeegee Combination came with it's own rod but I am not sure about that…. and we couldn't find it anymore. So why not use the common…
Spare part if you break the existing while changing the gear. I used PETG but i'm sure ASA or ABS is a better solution cause of the chemicals someone use.
I don't know how you feel about the Vileda tower drying racks, but if you really put a lot of weight on them, their feet can't take it for long. That's why I built this foot to solve the problem once and for all. It is compatible with the…
For more stability, I printed it in a horizontal position with tree support.
Für alle die den Superfeger von Vileda zwar mega praktisch finden, aber keine Lust haben jedes Mal einen neuen Besenstiel dazukaufen zu müssen. Ihr benötigt: Schaumstoff für den Superfeger (oder einen anderen mit 38mm Dicke und 160mm…
You can use it as a replacement if you lost the original clip (just like me). Easy printing on the side, no supports or anything. PLA is strong enough, no need for fancy materials.
Dieser Adapter verbindet eine Vileda Teleskopstange (z. B. vom Wischmopp) mit einem Swiffer Staubmagnet-Aufsatz. Der gelbe Swiffer-Griff wird einfach abgezogen, und der Einsatz wird direkt in eine der drei Aufnahmen gesteckt: gerade, 45°…
Small replacement feet for the vileda express that offer better support on older ribbed radiators. *estimated print time and material usage (P1S, 0,16mm layers, PLA, 3perimeters): 29m, +-11,3g
A handle broke off of my mop, so I designed a new one. The top was not printed out correctly on my Ender 3 so I cut it out.
Design Concept The Clothes Dryer Jointer is designed to securely connect the bars of a clothes dryer, ensuring stability and efficient usage of space. Its sleek design is both functional and aesthetically pleasing, blending seamlessly…
Hledač středu Je praktická pomůcka k vyhledání středu na kruhovém tvaru. Přiložením několikrát hledače středu na obvod kruhu a narýsováním několika přímek jednoduše najdete střed kruhu viz ilustrační foto. Nebo k narýsování přímky vedené…
Printed with PA6-GF filament. Screw 3 x 14mm - 1pc. 100% infill.
Vileda mop handle holder wall mount. Printed with PLA
I have a Vileda mop, one of the kids have lost the cap for it. I designed a new one.
Rubber foot support Vileda - Premium Total Reflect Plus 159385 i printed in TPU
Copy from the original model: I don't know how you feel about the Vileda tower drying racks, but if you really put a lot of weight on them, their feet can't take it for long. That's why I built this foot to solve the problem once and for…
Prints well with 25% infill (gyroid) and 3 outer walls. I have printed in ABS and will see how long it lasts. PP would be though due to chemical resistance.
Unser Unterdruckwächter hielt nicht anständig in der Installationsdose… Habe diese Abdeckung/Halterung zum Anschrauben erstellt. Eventuell kann man noch Schraubenabdeckungen drucken. Uns lehrt es so.
Plain cap for the Vileda Infinity Flex drying rack. Schlichte Abdeckkappe für den Vileda Infinity Flex Wäscheständer.
I broke the staff on my old Eta mop. Got a new one, but hated how Vileda solved the rug attachment. So I decided to make an adapter and attach the Eta bottom part to the Vileda staff. Print the cap twice. The metal rod has 8mm diameter.…
Easy Holder to mount the vileda turbo bucket on the wall. printed in petg. 0,2mm layer height.
Vileda Handi Dish Brush Refills are $1.60ea and i can make them for $0.36 $0.21 for the sponge and $0.15 for the print
Do you need longer mop? Try this extension which fits the Vileda coned thread. Print the two parts horizontally for better strength and then glue them together. You can find small holes along each of the two parts - insert short pieces of…
I'm a fan of the spice rack design by @LittleDangerous and have been using it for years. The latest version updated the design to use full width Large 3M Command Strips for better adhesion to the mounting surface, but that also meant that…
Vilada ruhaszárító lábak Print Settings Printer Brand: Anet Printer: A8 **Supports:** No Resolution: 0,2 **Infill:** 50 Filament: Azurefilm Petg Black Category: Household Supplies
A very specific model for a rather small target audience ;) My girlfriend has a portable “X-Stage” poledancing platform which can be disassembled completely. Inside the base is a large ball bearing to let the pole spin freely (it can be…
For mounting under wings on Vileda Infinity Flex and Vileda Soft Care clothes dryer. For installation put the hanger in the middle and move it to one side, than install the second hanger and move it to the oposite side.
Key chain hledač klíčů is for everyone who had always problems to found his keys =)
After using the Vileda Steam, the floor was getting wet at the location it is "parked", to avoid this, i made a simple stand so that there is a little gap between the Vileda and the floor to dry better.
Print it however you like i did it vertically but horizontally will be better but it will need more support. I print it on raft because for some reason petg supports stuck for good on the buildplate and raft is easier to remove. Filament…
Zvonkohra tematicky laděná pro hledače pokladů.
Mein Deckel ist abhanden gekommen von meinem Vileda Stream. Darauf hin hab ich mal einen neuen gemacht. Ein kleiner O-Ring (Dichtungsring) ist noch erforderlich.
The connection from the trigger inside the Vileda 1-2-Spray mop broke so I designed a new one. It’s my first design in Fusion 360. It is mainly functional. I added the Fusion file so feel free to edit it. I printed it on an Ender 3 V2…
Replacement ice scraper blade for vileda ice scraper. Print in petg or asa with 4 perimeters.
kein Umfallen mehr möglich! Rand, um überschüssiges Öl abzufangen ergonomisch
To remove the old part and insert the new one, just heat the mop handle with a hot air gun. Additional Materials Needed: 1x M4 large washer 1x M4 small washer 2x M4 locking nut 1x M4x 70mm threaded rod Recommended Print Settings:…
Minimalistic wall mount for Vileda Total Reflect Ironing Board. Desinged to use with 4mm screws with countersunk head. I've mounted it on solid wall, the distance between screw holes is 41 cm. Printed with PETG, wall line count:3;…
density 50% Glued it on the steam mop and working great
Replacement adapter part between vacuum and hose for the toy vacuum cleaner from Vileda junior. I printed it in PLA at an angle of 35° to increase strength.
This is a top protective cap designed for the Kodi Sport quick-release pole used in poledance setups. It snaps on top of the pole tube to provide a clean finish and added safety during use and transport. Printing recommendations:…
My Vileda ProMist MAX ejector broke, so instead of throwing it in a dump, I decided to make a new switch. to change the part 1- unscrew the 4 screw in the mop 2- Take out the old part by sliding it out while pressing the big spring in the…
Replacement bottom (to the ground) locking ring for drying hanger/rack Vileda Viva Air SupaDry Had this drying rack on my garden for ages, but bottom locking spring fell apart and now it wouldn't stand straight. Since the ground anchor is…
Button for vileda mop. Printed a little tilted to make it a little bit stronger. Category: Bathroom
Original part had one arm that broke, since the type of plastic is not known it's difficult to know if gluing would be successful. The replacement does not fully match the original's function as the arms open together. Hole diameter for…
The original joint broke likely due to something heavy being on it, plus UV damage from having the dryer outside. The other models I've found didn't fit very well so I made my own. The rotating part is 59mm in diameter, which in my case…
The connection from the trigger inside the Vileda 1-2-Spray mop broke so I designed a new one. It’s my first design in Fusion 360. It is mainly functional. I added the Fusion file so feel free to edit it. I printed it on an Ender 3 V2…
I broke the gear wheel that holds the one-way bearing (freewheel) on my Vileda. It's available for a few euros, but I liked designing and printing it. I can't vouch for its sturdiness, but mine is working fine so far. Be careful not to…
Major Features Multi-Part Assembly The fully assembled sword comes out to approx. 5ft. The sword is comprised of a multi-part assembly that is designed to fit on most printers. There is a standard file set for larger printers and a file…
Replacement bottom (to the ground) locking ring for drying hanger/rack Vileda Viva Air SupaDry Had this drying rack on my garden for ages, but bottom locking spring fell apart and now it wouldn't stand straight. Since the ground anchor is…
Saint RAAMon of Vuhledar Slava Ukrani. Yea. Its Saint Francis…more than likely he would not approve. Fully aware of the suspension of decorum and magnification of cognitive dissonance.
Print it however you like i did it vertically but horizontally will be better but it will need more support. I print it on raft because for some reason petg supports stuck for good on the buildplate and raft is easier to remove. Filament…
