Counting matching models…
🐻 Small Filament Spool V2 - For Leftover or Sample Filaments 🐻 This spool is the perfect solution for organizing leftover or sample filaments. With a capacity of up to 100 grams, it’s compact, efficient, and user-friendly. The spool is…
This simple tray to help you keep your environment clean. It snaps on the screews so it doesn't move.
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
FUNCTIONAL MINI SPOOL FOR FILAMENT LEFTOVERS This is a remix of https://www.thingiverse.com/thing:1738730/ Two major modifications: I increased the hub of the spool to 50mm dia like most of the commercial filament spools I resized the…
Get rid of filament waste and all kinds of small rubbish around your workshop, quickly and easily. The model is optimized for 3D printing and has been thoroughly tested (this is the second iteration of my design, I may upgrade it even…
If you find this thing useful, please consider sending a tip. :) https://paypal.me/cdsmakestuff https://www.venmo.com/u/cdsmakestuff Did you come home from ERRF with a boat load of samples too? Don't want to wind them onto full size empty…
This is a small filament spool to organize filament leftovers or samples and release the space took by the large but almost empty spools in your shelves. It is small enough that you can fit two of them in a 15x20cm box like the one in the…
For a while I had too many almost finished spools in my dryboxes holding a lot of space. To relive the storage issue I designed this modular spool where two identical side can be attached together, multiple spools can be attached into…
After converting the Mk4s to the CORE One I had a lot of leftover parts, so I made this heat insert press out of them. Feel free to remix this model. Parts reused: Old print bed 2 x 8mm rods (from the X-Axis) 4 x 8mm bearings (3 from the…
Hey there I designed this shopping cart token for the Last Meters Contest. I believe that this is great for using up the rest of the filament and you can't have enough of these token. I have one on my car key and one on the house key. You…
I was looking for some spools to print for the many small bits of filament I have (I print a lot of tiny jewelry, so I buy lots of sample filament). But many of the spools take too much filament, or mostly, too much time . I don't want to…
Leftover Filament Spool Requirements Can be printed on a MINI in two prints or on a MK2-4 / Core one build plate in one print. Filament: ~33g Time: ~2.5h Works best for 1.75mm Filament Use Case I designed these spools to help organize…
This trash can is ideal for school. It is suitable for storing pens or disposing of papers
Are you hesitant to upgrade your MK3 to a MK4 because of all the old printer parts you'll have left over? Are you also interested in printing with PET bottles? well this remix should address both of those needs! Your old MK3 parts can be…
I have same yellow PETG almost at the end of its shelf life, I had a few quick models never printed until now... Print instructions Category: Decor Summary I have same yellow PETG almost at the end of its shelf life, I had a few quick…
What do you do with the leftover line that you remove from the overfilled spool you just bought? Do you nicely coil it up to find it all tangled on the bottom of the tool box? Do you bunch it up in a corner of a drawer like an animal?…
So this is a potentially over-engineered solution to a problem not many people have but here goes… If you have a modern Miele washing machine that uses the DOS washing liquid bottle system, then you are probably as frustrated as we are…
Dimensions: 15 cm diameter, ~3.5 cm wide.
Leftover tray for Neptune 3 Pro. The size is made to fit under the build plate from one side and be a bit higher on another for easier use. There is a cut on one side for Z-axis to fit. I used thermo glue to glue limiters on the left side…
I collected a lot of leftover filament over the years, and most of the filament is off the spool to save space. This often ends with a tangled mess that is hard to store and print. I modified a leftover spool by removing the inner tube…
It is a simple wall hanging made out of the recycled spool and some 3D printed miniature pots. For decoration, I used origami plants for pots as my wife is an Origami artist, but you can use plastic plants. Comment me if you would like to…
When there's not much filament left on a roll, but still enough to actually use for printing, keeping it on the 1kg roll takes up space and seems wasteful. So, use that little bit of filament to print this spool! Then wait until the next…
I loved the idea of reusing the parts from Prusa upgrade. I have a friend who upgraded their print farm, and now has 4+ sets of leftover parts. I found the Prusa Leftovers Edition by kool_memes , but wanted to use an internal power supply…
I loved the model on first sight, but hate spools which have too much play at the holder.
got any of that 20x20 ou 30x30 laying around? no ? ok we got you covered
💡 日本語 (Japanese) 少し余ってしまったフィラメントを有効活用するためのモデルとして、塗装棒にしませんか？というモデルです。 📌3つのモデルが含まれます。 1. 大きめのはさみタイプ 2. 小さめのはさみタイプ（細かなパーツ用） 3. 筒状パーツ用つっかえ棒タイプ（内側から突っ張って固定） プリント設定 サポート不要（No Support） スライサーのデフォルト設定のままで可 --- 💡 【おすすめの台座の作り方】…
This holder is directly attached to the extruder motor to feed small samples of filament directly where you have no spool. Print with PETG or other temperature resistant material as the extruder motor gets warm during printing. Layer…
Boxes for leftover cerealbox lids The problem After making a lot of dryboxes using the Filament Storage 2026 system by GunplaMark ( https://www.printables.com/model/1606655-filament-storage-2026 ) I was left with a lot of lids from the…
I bought a set of bird spikes on Amazon and ended up with way more spikes than I had bases to put the spikes in (a picture of one of the original bases, made of metal, is in my first photo). Rather than buy another set of spikes/bases, I…
If you are like me and you have some filament leftovers - this could be your hook. Its easy to print and to assamble - just put a pice of filament through the holes to make the hook swingable. Two versions - one “square” and one less…
This Planter is made up of many parts from an Ender 3, which have been removed to be upgraded, like the fans, extruder, or PTFE tube. You may have these parts laying around if you like to upgrade you printer. These parts also may not come…
Filament leftovers container with the compactor.
100x160mm sign, with art of a cooked turkey and text “Leftovers are for Quitters” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of…
I'll need a storage for wooden sticks and leftovers in my workshop. In the past I used tubes for that, but every time you have to empty the tube completely. Now I want a storage where I can see the content. This ist the result. I used PLA…
Ever wonder what's in that leftover Tupperware container? And don't really want to pop the lid, except on what you are looking for? Me too. So I designed this little tag to snap into the slot on the lid (for hanging the lids on a rack).…
Filament leftover miniscale hanger Due to ring shape of the leftover filaments I was unable to weight them properly on a miniscale. So I created this hanger/tooll to weight your leftover filaments on a miniscale to check sufficiency of…
After using the VESA mount in my monitor, I was left with a heavy chunk of metal to recycle.
100x160mm sign, reading “it ain't ‘leftover’, just not yet et” with art of slightly less of a roasted turkey than the previous “leftovers” sign. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with…
If you've ever had the pain of not knowing were to put your leftovers from 3D printing, as I have. THIS LEFTOVERS BIN WILL SOLVE THAT PROBLEM!!! You can customize the size (depending on how much junk your 3d printer gives you). As a huge…
An arm that uses the original fan and relocates it near the laser for removing burned leftovers. how to: 1. unscrew the fan 2.unscrew the back plate and detach the fan wire 3. put super glue on the borders of the fan CAUTION : you have to…
A base for holding filament rolls and a holder for refills or leftovers. The base fits 1.6cm plates, but will benefit from some soft padding for ekstra hold. Use the divider.stl to divide the refill roller into smaller parts where you can…
Tool for measure length of leftover filaments. PrusaSlicer shows how many metres of filament is use for printing. With this tool you can be more sure how much filament you have left. It's circumference is 20cm. It's two part for easier…
Seven day-of-the-week clips (MON to SUN) that push onto the rim of a food box, the edge of a fridge shelf, a bag top or a leftovers container, so you know when it was made or opened. Use leftovers in order and waste less. Print a set in a…
