304 models
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Change strings on your ukulele faster and easier. Internal dimensions for the tuning peg are 9x19 mm - will fit most ukulele brands. Only 10 grams of filament. Designed as print in place, prints as 1 piece, no assembly needed. Just…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
I designed and 3D printed replacement parts for my first ukulele: - tuner bushings (snap-fit) - bridge saddle (custom shaped) One of the original bushing was missing, and the saddle was damaged, so I recreated both parts using Fusion 360.…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
My previous design - heart shaped ukulele is working great and i love it's sound. So i decided to make another ukulele project: ukulele shaped ukulele, inspired by that design. No more hearts. This design is an attempt to join some…
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
ASSEMBLY MANUAL IS HERE I designed this in a single evening. Do with that information as you will. HTLF is a lane-based filament changer for Klipper designed by ArmoredTurtle. It uses a camshaft to engage the selected lane, effectively…
I rotated the original model to have a proper orientation on the bed, and cut off the bottom ≈1mm to give it some flat areas to stick to the build plate. The original author says that this is intended for tenor ukuleles (83mm frame…
This is 3d printable ukulele bass inspired by Ukulele Bass by DavidB , but everything is redesigned (not always sure if for better) based on sketches from this project. Goals of remix: make it printable on my Anycubic Mega printer (about…
There are already many designs for 3D printed ukuleles. Why another one? My goal was to design and build from scratch an instrument that I could then use to write my own original song. It ended up taking a lot longer than I originally…
This is a concert sized ukulele designed to be able to print on most prusa i3 sized printers. the split parts must be glued togeter, but most of the pieces fit together without a need for glue, however they do work better if glued in…
This holder fits my ukelele. It may not fit yours.
Maybe also fit for guitars if you scale it up larger
Body length is 240mm, so make sure your print area is large enough. The instrument is assembled from several printed parts that are glued together: body, back lid, neck, headstock, fretboard and bridge. Saddle simply slots into the…
The shape of this hook is tuned to closely fit a Kala Soprano Ukelele, with just a little bit of wiggle. It may fit other ukeleles well too, but there is quite a bit of variation in uke neck sizes, so check the following measurements…
Yet another ukulele wall hanger. Tried to make it reasonably stout since the (very small) weight is bending the hooks in the weakest direction. I tried to snap it by hand but couldn't so should be fine for a soprano/tenor ukulele. Would…
I've decided to design 3d printed ukulele. This one is different from other designs. I've reached all my design goals which are: Can be 3d printed on almost every printer on the market (fits 210x210 bed) No additional parts (Nothin except…
An attempt to create a travel ukulele I tried to make it as simple as possible using glue and only 1 screw. The tuners I bought on Aliexpress link below: https://pt.aliexpress.com/item/1005001570809164.html The screw I used was an M5x80mm…
Simple wall mount for a ukulele to mount with a 4mm wood screw. Very strong, quick to print, no support.
Geometric Shapes - Ball, cube/parallelepipped, cylinder, cone e hexagonal prism Category: Math
Original model by shooterhg on Thingiverse. This radius gauge makes it easier to measure your instrument neck. Measures 16", 15", 12", 10", 9.5" and 7.25-inch radiuses. There are 2 versions, with slotted and no slots. Print with 0.2mm…
I modeled this Ukulele key chain for one of my kids. Enjoy!
A stand to show or store your mini guitar / ukelele. Great gift for people who like music and own an ukelele. No supports needed! Somthing like rubber stickers are needed where the ukelele stands at so it doesn't slide over the slippery…
V1 EASY FRET PARTS: 1 x Flexible Plate [TPU] 1 x Hard Plate [PLA] 1 x F Key [PLA] 1 x G Key [PLA] 1 x am Key [PLA] 1 x C Key [PLA] 1 x Head Mount [PLA] 1 x Neck Mount [PLA] 2 x 91292A197_TYPE 18-8 SS SOCKET HEAD CAP SCREW [McMaster-Carr]…
Heavy Duty Ukulele or Banjo Instrument Wall mount hidden Screw Design. Fix bracket to wall then slot mount over - MUST print bracket laying down so layer grain runs the length or bracket MUST print the mount standing up. If not, I can not…
Incredibly small guitar/ukulele capo printed in 5min. 100% original click system protected in Europe. Feel free to use it for personal needs. This capo fits any guitar lover's pocket. Print instructions .2mm layer, 2 perimeters, 100% infill
We tweaked the model to allow our kids to start learning the basic guitar chords, since a baritone ukulele is tuned DGBE. The first one we made is in the pictures below, and it had to be modified a lot to work for the much smaller…
Made from two different parts. Can be mounted either on the left or right by sliding them together.
Simple table top ukelele stand with supports to prevent instrument from toppling to the side. You may need to adjust the part size to fit your particular uke. Print settings used: Layer Height = 0.15 mm Wall Thickness = 1.0 mm Infill…
Here are the files to print my version of DMC 5 V's Book. Besides printing this you will also need: 1) Bound sketch book (The model is made to fit a "Master's Touch Bound Sketch Book" which is 5.5in x 8.5in with 80 sheets). If you use any…
This is just a basic hook for hanging my hex ukulele on the wall. The ukulele hangs at a slight angle so the body doesn't touch the wall. Print it vertical. As the ukulele is pretty light it doesn't have to be particularly strong - 2…
A remix of: https://www.thingiverse.com/thing:4189133 I added a dovetail mount that screws to the wall. The hanger then slides over that, hiding the screws. PRINT AS SHOWN IN THE .3MF FILE. It also has the infill, perimeters, and seam…
This ukulele prints in 4 pieces and glues together with superglue. Instructions All parts printed in PLA with 0.2mm layers. The body prints as a single piece with no supports (all needed supports are built into the model). The supports on…
This is a lovely winged uke hanger for your wall. The holes are roughly the size of a standard drywall screw and that's what I used to mount it. I think ukes are light enough not to bother with anything more substantial, but it's your…
modified for purposes such as warping and filament tangling all fixed and ready to go
I am working on Version 2, with the shorter neck first. Instead of using a threaded rod inside the neck, I'm now using a vertical aluminum strip (2 x 15mm) glued into the neck, which provides much better stiffness and prevents bending…
Design Concept This 3D model presents a skeletal version of Pikachu, combining the iconic Pokemon character with a skeleton theme for an intriguing, eerie design. Use Perfect for fans of Pokemon and those who appreciate unique…
I remixed: https://www.thingiverse.com/thing:1367923 to create wider space for geared Ukulele pegs. Grab all of the part at the original creators link. These modified body parts are only if you use geared pegs like these:…
Two part - Slip together stand for your instrument. Print instructions I removed the Easter eggs from this print. Print was too small so I increased the cradle size to > 70 mm (2.75 in); since the original would not fit a Ukulele or…
Here is a fully functional ukulele. It has been tested and approved by a professional musician (you can see him playing it in the linked video)👍 For the part to custom, there are 3 squares, 4 rectangles, 1 rounded and 1 for the neck.…
I made a ukulelestand that has a cavity that you can fill with water or dirt to create a counterweight to make sure that the uke won`t tip over! Add some small floor protectors underneat and on top to finish the print. NO SUPPORTS NEEDED!…
This is a wall hook for a ukulele. Please check your layer adhesion and the strength of your print beore hanging anything too heavy or expensive on it! Happy printing
Introduction PK-ulele is my most stable iteration of a 3D printable tenor ukulele. It includes cutouts for a tuner/preamp/pickup that allows it to be used in both an acoustic situation as well as a plugged in and amplified environment.…
Ein Ersatzteil für den Gewindetrieb eines Spiegelstellmotor des Opel Astra H (Corsa D). Für den Druck sollte ein SLA Drucker verwendet werden. Da die einzelnen Segmente das Gewindetriebs im Überlastfall überspringen können müssen, wurde…
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ This fully 3D printable ukulele (save for bolts and strings) uses an acoustic transducer to carry the lower frequency sound created by the strings to a…
The model is a wall mount for a ukulele... You can fix it to the wall with two screws (4 x 40 mm) and a dowel (6 mm)... You must note that this bracket is only usable for ukuleles with an upper neck thickness of 4 cm! If the neck of your…
Ukulele tuners Update - 8-13-24. I've designed a newer model which is stronger and better. It can be found here. Update - 4-21-24: I've been having some problems with the tuner peg breaking after being at tension for a while. I redesigned…
Work in progress All the files are ready, but for now they are in one 3mf and without instructions. So take elements from this 3mf and split into several prints acording to your material, color, etc. Use instructions and hints from…
I needed something to hold my hex ukulele . It's not perfect, but it serves my purpose. I'm not great at designing things so this is a mashup of Tinkercad and Fusion 360.
A wall hanger for your ukelele
Designed from scratch in Fusion 360, but used the design from ARC7217 ( https://www.thingiverse.com/thing:2819279 ) as a starting point. Slightly longer so that the hole to put the strap in goes outside the Ukulele body (at least it does…
This version will not be updated anymore. If you want the most recent version, check version 4 out here: https://www.printables.com/model/343896-playable-3-string-ukulele-like-instrument-v4 I designed a new instrument that is meant to be…
This is the third iteration of my ukulele tuners. This new version has a number of improvements. Only two, #2 3/8 inch screws are needed per tuner, instead of 4 required for the model 2. Reduced backlash A new, easier to print, tuner knob…
This is a remix of Tomek's awesome Hex Ukulele. After building a couple, I wanted to customize them a bit more. So I modified his design to have a plain face on the body. From there, I was able to add text and images to design a few…
This is a Ukulele holder that I designed. It closes (rotates the arms) when you put your ukulele onto it. When you lift your ukulele up, it opens back up again. This allows for easy and secure storrage of your uke. It is broken into…
Introduction A mini, pocket ukulele, perfect for taking along with you, when you travel! A fully playable, 75% scale, soprano ukulele. Only 15 inches tall, 10.2 inch scale length, and super cute. Update - 01-10-2026 - I've removed the…
I improved the original keychain/ornament to make it look more like a ukulele. The original was basically just a four-string guitar in shape. I widened the neck and added the characteristic peak of a soprano ukulele at the base of the…
Printed with PLA, standing upright, with tree supports.
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
I designed a ukulele stand because the others that came up didn't fit in my house. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 100 Infill: 10% Filament: Tinmorry PLA…
An ukulele microphone holding clip for the t.bone ovid system cc100 microphone. The holder consists of 4 separate models: Top clip part with microphone holder Rod Bottom clip part Pad (2pcs, should be printed with some foamy/flexy…
I attempted to build the original design by MyE3D, but I had a lot of difficulty with the fret installation. The force required to install the frets kept damaging the neck beyond usability, and I gave up on the project for a bit. I wanted…
My table that I have my 3d printer on was very wobbly so I installed these braces to make it more stable. They use M5 screws to attach it to the table.
This is a simple ukulele-shaped key chain made of 3 separate parts (body, fretboard and bridge) that when printed, needs to be superglued together. Reason for separate parts is ability to print them in different colors so keysets can be…
Higher infill for a stronger neck, I used super glue to connect the parts but 3D gloop works best. For the strings I used fishing line.
This is a wall mount for fender hau'oli ukuleles that have a curved headstock that slips out of most other 3D printed ukulele wall mount. The mount is fastened to the wall with 2 screws and keeps the ukulele from ever touching the wall. I…
Replacement tie bar for an Ukulele. 42mm distance between outer string holes. Includes two saddles, one 8 mm one 6.5 mm height. Print in ABS for strength, use brim and 4 perimeters on saddle Category: Music
Duplicate 4 or 6 times in slicer as necessary after setting up first bead. I use .16mm layers and just plain PLA. I seem to have more issues with the holes using silk PLA, but if you don't mind a little cleanup than try silk or other…
Wall mounted ukulele hanger. This will fit most ukulele with a 1.5" wide nut, which is the average width across brands. The throat is also wide enough for guitarlele type instruments with a nut width closer to 2". It's probably strong…
Ukulele wall mount. This mount is designed to rotate, to accommodate ukuleles with headstocks that aren't necessarily symmetric. If you need a ukulele to hang from your wall mount, I designed one that goes nicely with it :)
this piece is to hang your guitar or ukelele with a strap that goes arround arround your neck. It's tipically used with spanish guitars that a lot of times don't have the possibility to put a strap.
this should work just like a ukelele. please print and let me know if you have any issues as I am more than happy to fix them, comment if you have any questions, and please post your makes. this shouldn't need much hardware besides glue…
An example of 3D model generated with my Gugulele OpenSCAD script… (see https://github.com/bguan/gugulele ). Decorative headless unibody gourd shaped design Single rectangular through-body spine Single oval off center sound hole T-Bracing…
Introducing the soprano guitalele - the newest instrument in my family of 3D printed ukes . A guitalele (or guitarlele, or ukitar) is a cross between ukulele and guitar, with six strings tuned like a guitar but the small size of a…
Meet HexWinder , your new go-to string winder for guitars and ukuleles! This print-in-place design is easy to use and features a hexagon theme for added strength and durability. Compatibility : Designed specifically for guitars and…
Please see the assembly guide, in pdf-format, under Files/Other files See the multiplate .3MF file[s] Some parts are printed with 70% infill Some, not many, parts require supports (See .3MF-file) Hardware required 2 x Screw M4 x 12 mm…
Based on my previous headless gourd shape ukuleles, but instead of using off the shelf tuning pegs, I designed these 3D printable tuning pegs that is completely concealed. This design allows the unit to stand upright on its base like a…
So i made this Ukulele for 3D Printing. Its a Concerto Ukulele so its a little bit large. Of course it cannot be printed as a single body. That's why i have splitted it in different parts. I would suggest to sand it before putting it…
V5.5 - This is an acoustic-electric version of my recent soprano ukulele design . It includes an under-the-saddle piezo and jack panel to electrify the uke! Update 9/26/24 - I've got a new and improved Model 3 tuner design. Check it out.…
While the Hex ukelele model is awesome, I ran into some issues with layer adhesion where the bridge bolts are concerned. Tightening the strings to the point where the uke was almost in tune caused the bolts I printed originally to…
Basic Ukulele Chords Chart Color Change at z-height included in gcode.
Here is my 3D print Soprano Ukulele. The instrument is fully functional once completed. I am quite pleased with how this turned out and have thoroughly enjoyed having a homemade custom ukulele. I have constructed two of these. The orange…
I was looking for a simple wall mount holder for my son's Ukulele, but did not find what I wanted. So I designed this one, which maybe can be helpful for some people :-)
This is a Soprano ukulele I designed to be easy to print and assemble. No glue required for easy repair. This is an upgraded version that uses a shorter 250mm steel rod. I adjusted the sound hole and bridge placement for a louder and less…
A wall mount for Ukulele with narrow ledges on the right and the left, to store a tuner and/or a capo. The mount works well with my Tenor and Soprano ukuleles. The mount prints without supports and is designed for two #8 screws. There is…
Ukulele hanger with OpenSCAD source. This hanger (wall mount) does not touch any wooden parts of the ukulele, thus reducing the wear on the surface finish of the ukulele. The metal part of the ukulele's tuning key shafts rest on the…
Ukulele Christmas ornament. Can also be used as a keychain.
Držák na ukulele/ukebanjo - materiál PETG. Sestavuje se bez lepení - stačí zacvaknout. Unese i těžší ukebanjo viz. foto.
Tele Lever cup for the BMW R1200GS models
A slimed down version of the support strips for the Hex Ukulele. I went with 7 mm after some measurements and consideration and they seem to fit and function perfectly.
This version will not be updated anymore. If you want the most recent version, check version 4 out here: https://www.printables.com/model/343896-playable-3-string-ukulele-like-instrument-v4 Credits: /u/Berkbig77 for helping me figure out…
This is a Travelele purpose-built to be tuned in GDAE or GDAD. I'm an Irish Bouzouki player and wanted something I could take on work trips to practice. The Travelele was ideal: quiet, portable. But it wasn't set up to be tuned in GDAD,…
I used the neck model and drew some 3d curves, made some pipes, added a block, rounded some corners, and this was printed and put on my wall. I used #8 screws to mount it to my wall. I used 6 perimeters and organic supports, print time…
I started playing the ukulele almost a year ago after receiving one as a Father's Day gift. About a month ago I found Daniel Hulbert's website and was inspired by his fantastic designs for portable travel ukuleles to start work on my own.…
Ukulele nut I created a nut for repairing ukuleles. It seems that carbon materials or hard PLA produce better sound than ABS or PETG. I also provide STEP files for different sizes and for adjusting string height.
I wanted to mount my ukelele to the wall, but I can't drill into it. So I made this mount which used 4 3m command strips from costco.
Introducing the all new Mini 2! The new, Mini 2, sopranino sized ukulele with a 10.2 inch scale length, significantly improving on my original Mini Pocket Ukulele . What's new in the Mini 2: Wider fretboard for better playability. New…
This is an old version. I do not recommend this version. Get the new and improved version here: https://www.printables.com/model/791862-customizable-soprano-ukulele-20 This is a Soprano ukulele I designed to be easy to print and assemble.…
Držák je navržen tak, aby byl dostatečně robustní a přitom skladný. Unese i těžší ukebanjo a v rozloženém stavu se vejde do kapsičky obalu nástroje. Na horní straně jsou tři přihrádky na trsátka a pojmou i silnější felcové trsátko. U…
V4 - 8-13-24 - initial release I recently designed tuners for my 3D printed ukulele. They worked pretty well, but there were some things that I wasn't wild about. Especially the two part washer that was used to hold the tuning peg in…
![DMC5 V Book [Lelegacycrafting]](https://media.printables.com/media/prints/26988/images/270003_d324d6d2-5aaf-478c-b3a2-8e1921f59068/60860597_456929635060976_682719012005609472_n.jpg)
