Counting matching models…
One fits 3 cup, while the other fits 6 cup. 6 cup have not been tested. I hava also made a tamper :-) It is only intended to collect the coffee in the funnel, not compress it. Print instructions You don't need support, but orient the…
There are 4 versions. 1-cup (48mm), 2-cup (52mm) and 3-cup (55mm). Venus (61mm). I hava also made a funnel to make it easier to not make mess (check out my other designs) :-) It is only intended to collect the coffee in the funnel, not…
Tamper to compress the coffee powder in a Bialetti Coffee Maker. Fits in the upper part of the Maker to store it.
I designed this leveler to achieve consistent results. The leveler is able to distribute the ground coffee evenly in the sieve without compressing it. Simply turn the leveler clockwise. If you put in too much coffee inside the sieve, you…
Funnel Holder for all Bialetti from 1 - 6 cup Print instructions Category: Kitchen & Dining Summary Funnel Holder for all Bialetti from 1 - 6 cup Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.16…
I couldn't find a funnel stand combo I liked for my Bialetti 2 cup Moka Express from my quick search so I modelled one myself. The funnel has a ridge that sits perfectly on the rim of the basket. Its well enough formed that it won't…
Schleich compatible set of cavaletti rails (stand and a rail/pole). Usage: Print two stands and one pole. Pole is single colored. Note: Use brims when printing poles horizontally. Support: No supports required.
I've redesigned original idea to have 3 legs and added knot symbol for decor ;) Category: Kitchen & Dining Based on: https://www.thingiverse.com/thing:1320577
General This is a funnel and stand for the Bialetti Moka Pot. Provided are STLs and OpenSCAD files. Funnel The funnel STL is for the 6 cup moka pot but if the smaller pots have smaller inside diameters, I could easily add them if someone…
The original didn't fit my 3 cup model so I just resized the original up about by 1/8th so that it would fit the 13mm stem of my moka pot no other changes have been made. Original by Jayuk. Print Settings Printer Brand: Creality Printer:…
ENGLISH I've always had a passion for Paracord and some time ago I met BlackSquirrel from whom I buy the materials to make my creations, they have a great assortment and well done guides and tutorials on how to make bracelets and more . I…
The funnel fits the Bialetti Venus 4 Cups Version. The inner diameter is 64,20mm, so please leave a comment if it fits also other Bialettis. I printed it PETG with 20% infill and a layer height of 0,2mm.
Thanks to the stand, the Bialetti coffee maker can dry undisturbed after washing. Bialetti stands in three sizes: 1 cups - approx. 60 ml 3 cups - approx. 130 ml 6 cups - approx. 270 ml Printed with 70% infill using PLA or PETG
After getting the Bialetti Brikka 2 Cup Moka pot, I noticed a few things that could make my coffee routine smoother. One issue was trying to hold the funnel steady while filling it with coffee grounds—it often ended up messy with grounds…
A remix of a funnel posted by Bob: https://www.prusaprinters.org/prints/82031-bialetti-venus-funnel rescaled in X and Y by 113,55%. Fits my Bialetti Venus moka - 6 cups version. I've printed it on my MINI+ using PLA with 0.2mm layer and…
Print comes in the correct printing orientation, prints with no supports and should not require a brim. Works very well for my moka pot.
I needed a new handle for an espresso maker - the one on thingi wasnt quite right so I remixed. Handle shown in Nylon CF Fusion file included if you need to tweak some more
French Bulldog sculpture. 19cm tall. Escultura de Bulldog francés para imprimir. 19cm Alto Here moore models / Aqui mas modelos. https://cults3d.com/es/usuarios/Artoys3dPrint/modelos-3d Follow me in Cults :) Category: 3D Printing
This funnel is made to clip onto the small coffee funnel within the Bialetti (see pictures).
I made the 4 cup tamper (gray) in January and the others (blue) a few weeks back. My father own the 10 cup one, so I have checked that it fits I use them pack the ground. You're not supposed to press hard
2 Part coffee funnel and distributor for Bialetti Mokka - NO SUPPORTS
Porta cialde+zuccherini+palettine+bicchierini Seguitemi e lasciate like perfavore. Grazie in anticipo
Wanted something to hold my Bialetti Moka basket upright while grinding coffee into it from my Niche Zero grinder. The holder has been scaled up to fit both 6 and 3 cup baskets. Print Settings Printer Brand: Creality Printer: CR-10S…
Inspired by the original model, I made funnel and tamper for Bialetti Musa 2 Cup moka pot. It will probably fit other Bialetti stainless steel models (2 cup size). Note the tamper is not intended for compacting the coffee grounds. It…
Simple tamper for 6 cup Bialetti Moka Expresso. (∅ 59,8mm) I added an FFXIV DRK logo to the top for my brother, but you can download the model without it as well.
A funnel and stand for the original Bialetti Mokka Express to fill the basket with ease. Both peaces fit into the Bialetti when its not in use.
Edit 26.08.23: I uploaded the .f3d files. Please mind the Licence! I hated the mess it creates when filling the funnel of my Bialetti Brikka, so I made a scoup/leveler combo. It's a two piece design, which uses magnets to keep it easily…
Tamper for any Bialetti or other Moka to press the beans. Size of the pressing surface is adjustable in the SLT file according to the needs (x and y dimension). The original one is designed for a one-espresso moka, so pretty small.…
Do you need a simple label for your garden seedlings and plants and want something with a pop of color? Are you going for most organized garden this year?! Then THIS IS IT! We shared the 3MF files so that you can customize your own…
Bialetti Moka Express 9 cup replacement handle. Use heat resistant filament. This is my first version and has not been tested, may take some fitment.
Print Settings: Layer heights: 0.15mm Wall Loops: 3 Infill: 15% Attached photo of print was printed using a SV06 w/klipper, using SIDDAMENT PETG CF Green V2, which can be found here: https://siddament.com.au/products/petg-cf-green Thanks…
The Courier of Enzo Ferrari The 1950s and 1960s are known as an era that witnessed a boom of race car transporters, which are being re-discovered today and held in a high regard. The two similar-looking transporters of the Scuderia…
Made to work with a stand for the basket. Allows for simple filling of the basket with ground coffee.
A personal project that I'm sharing now in hopes that it'll be useful for someone. This is for the older model of Bialetti Venus 2 with plastic lid hinge (newer models use metal). Note that this is a full replacement of both the handle…
Moka Bialetti Key chain - Portachiavi - Porte Clès - 钥匙链 - llavero Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective owners…
This funnel can be printed without supports on most modern printers. It has a 65 degree overhang that is the lip on which the moka pot rests. This funnel is designed to fit inside the moka pot for easy storage when not in use! Of course,…
Designed and printed in less than 1 hour, to help load the coffee into the small Bialetti 1Cup basket, works great! Printed in PLA Galaxy Black If anyone needs 2/3/4/5/6 cups size, just send me the exact internal diameter of the funnel…
Elevate your coffee brewing routine with this funnel specifically designed for the Bialetti Moka Express 6-cup variant. This funnel ensures a mess-free coffee-making experience, fitting perfectly with a 60mm inner diameter. The funnel…
just a design exercise with a realistic copy of the well known Moka coffee maker Bialetti. THe fileter is part of it, as well as the pipe moving fresh coffee on the upper part. I added a M3 bold and nut to represent the pressure valve and…
☕ Mini Moka Magic – Bialetti-Style Drawstring Bead ☕ For all the coffee lovers out there, here’s a tiny tribute to the legendary Bialetti Moka pot —in bead form! This charming drawstring bead captures the iconic octagonal shape of the…
Printed in white ABS and acetone vapor smoothed to prevent coffee grounds from sticking.
Modello semplice da stampare,io l'ho stampato girato a faccia sotto credo si possa stampare senza supporti o forse al massimo inserirli solo sotto la scritta di Dragonball io l'ho stampato usando i supporti solo sotto le scritte.
Its one piece, the picture says it all.
Simple Bialetti Venus 6 cup holder. It's for the old model with the plastic thumb-rest on top. Fits the three parts at an angle so the water can run out. It has a small drainage but i suggest you dry the coffeemaker a bit before putting…
A funnel which fit perfecty the Bialetti "La Mokina" 1/2 Cup italian coffee maker. The tamper is just here to tap a little bit the coffee :)
This is a remix of samelovecroc 's brilliant moka pot funnel, but adapted for the 4-Cups version of the famous Bialetti Moka Pot. The one presented in the pictures is printed at 0.3Lh with a 0.4 Nozzle.
Bialetti / Moka Pot Funnel holder A little upgrade for holding a bialetti funnel in place while grinding coffee powder. Don't forget to hit the like button!!!! THX opulius See my design in action:…
This can be used as a stand alone funnel to fill the Bialetti Venus 6 Cup Moka pot filter. But was designed with the Melitta Calibra coffee grinder in mind, which has an inbuilt weight scale which allows for more accurate coffee dosages.…
Designed from scratch but based on the idea from Klenmd (Thingiverse) to be adjusted to the Bialetti moka induction 2 pot. You can use it as a funnel and coffee flattener. The diameter of the basket where it is attached is 52mm. You might…
A set of tools for a 6 cups Bialetti Moka pot. You can use it to hold the filter straight while putting your ground coffee in. There's a funnel to help with that, and two tampers: one smaller than the funnel, so you can use it to push the…
Make great coffee without making a mess.
Update 02/2024: I made a WDT-Tool and cup which uses my previously designed funnel as a guide. It consists of two parts, a needle plate and the main body. You need 28 pins (25mm max. length, 3mm pin heads) to insert into the needle plate.…
Just another funnel for the Bialetti Moka induction. 😊 The coffee funnel is a practical accessory designed for Bialetti Moka Induction coffee makers. Key features: 55 mm Inner Diameter : This funnel is specifically crafted to fit the…
Designed for 4.2mm stainless self tapping screw, 18mm max length. Since original aluminum screw was damaged trying to unscrew
A holder for a 3 cup Bialetti Break moka pot, to serve both as a holder and coffee loading-distribution plate. The funnel drops in place and after distributing the coffee as preferred it can pushed out from the sides (see last picture, it…
A scoop to fill my moka machine (Bialetti Venus 6tz) in one go with 90ml of ground coffee. The design is parametric - you can adjust the volume in the attached source file (in user parameters) I use it along with the funnel:…
The funnel threads onto the water basin. This is for the 4 cup/shot Bialetti Venus for induction stove. Also check out my funnel version for the 6 cup/shot. The print settings I used: 0.2, 3 perimeters, 10% infill, concentric top/bottom…
Simple funnel that helps you to put coffee to Bialetti Venus (6 cups). It also works as leveler. Print without supports “upside down”. I suggest to set random starting point in slicer (I forgot) to avoid seam line.
A funnel that fits a 3 cup Bialetti moka pot. To help when dosing or during your "puck" preperations.
This morning I was making a lovely coffee and yet again had to clean up some spilled coffee grounds! "Never again!", I thought to myself and so this model came to fruition. I designed this but was definitely inspired by the shape of this…
A replacement knob for the timer on our kitchen hood. The original one broke and the new ones are like 40€ so I designed and printed one instead. The one in the image was printed in transparent Prusament PETG, I guess PLA should work as…
Made in tinkercad codeblocks,in a unitcel you can i.e. calculate the percentage of space an atom occupies in a crystal.
Komplettes Set für Bialetti Espresso Maschine. Enthält einen Einfülltrichter mit Schieber für den Siebträger, einen Stampfer/Andrücker, einen Fuß für das Sieb und einen Fuß, um die Hände beim aufschrauben vor der noch heißen Maschine zu…
Just another tamper for the Bialetti Moka induction. 😊 Use this tamper to slightly compress ground coffee before brewing. Technical Specifications: Inner Diameter : 54 mm Material : PLA (or any other suitable filament) See my matching…
Taking inspiration from espresso knock boxes, I designed this simple tool to help with extracting the coffee puck from a Moka Pot filter basket. It is an, admittedly, particular use case, but I didn't want to tap the basket on the garbage…
I wanted to have a more compact handle for the current Bialetti Venus (6-cup) because I use it on the road. The more compact shape means, that the handle is closer to the (hot) steel pot - so be careful and don't hurt yourself. An even…
I made a Tamper for Moka Bialetti Kitty Nera for 2 (43mm) and 4 (53mm) cups. Easy print from PLA..
A stand with spillage channels + a leveler that sits on the basket for Bialetti moka pot baskets with 44.5 outer diameter. It still needs some minor adjustments with tolerances and overall design but it is usable as it is. The source file…
A simple funnel which fit perfecty the Bialetti "Moka Express" 1 Cup italian coffee maker. Note = I had to print it with “0.20mm STRUCTURAL” preset due to imperfections in “0.20mm SPEED” preset on MK4S. I didn't investigate further than…
I successfully printed and used the replacement part in PLA but the handle is to short for my liking. So I cut up the model in 3d Builder and increased the length of the handle. I will now print it in PETG because it will be closer to the…
A nice tamper for your Italian moka pot, matching the iconic Bialetti style. Remember not to press your coffee too hard.
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes 50mm OD when printed 1:1 scale, this way you can form large dodecahedron lettice molecule-like structure for kids and silly grownups. it is easily scaled…
Bialetti knob for top cover Category: Kitchen & Dining
This drying and storage rack was designed for the Bialetti moka express 3 (left) and 6 cups (right). The total height of the rack was set by the 6 cups Bialetti. You might be able to make it suitable for other sizes by up- or downscaling…
With a perfectly matching diameter, it ensures even compression of the coffee grounds - delivering fuller flavor, better extraction, and that authentic café-style moka at home.
Hello coffee lovers! If you’re tired of coffee grounds spilling all over your favorite moka pot, I’ve got a simple solution for you — a funnel! You can also tamp your coffee (honestly, I’m not even sure why I do this, and I’m pretty sure…
My son lost the battery cover for a safety accesorrie from his schoolbag called "Blinkie Kletties" - ergobag https://www.ergobag.de/kletties/special-kletties/blinkie-kletties Category: Accessories
the short one could put in the moka pot. get what you need.
Came across Jayuk's moka pot funnel stand in this James Hoffmann's video : https://youtu.be/X3bEjJ_S2V0 Unfortunately this design doesn't suit my big old 9 cups (420mL) Bialetti Moka Express funnel, nor the couple remixes out there. So…
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes and sticks 50mm OD when printed 1:1 scale, this way you can form large icosahedron lettice molecule-like structure for kids and silly grownups. it is…
3 bulloni creati con creazione di filettature ISO Filettatura ISO standard Filettatura ISO con aggiunta di tolleranza -0,2 mm solo su dado Filettatura ISO con aggiunta di tolleranza -0,2 mm sia su dado che su vite
THE PROBLEM Moka pot funnels are cumbersome. DESIGN BRIEF Hold the the funnel of a 6T Bialetti moka pot. Hold the funnel without tilting. Have a wide enough base to let the funnel sit over the moka pot boiler. Allow water to pour through…
Changelog: Update 20230307: I've added a version for a 300mm2 buildplate as well, either for the smaller printer or for the smaller cabinet. ---------------------------------------------------------- I designed all from scratch, taking…
You know you want one - a highly detailed miniature moka pot, for fiddling and general amusement. With removable filters and funnel, central thread, and even a working lid, just like its metallic bigger brethren. Good for one, or even two…
english 2 versions: with or without outer attachment ring Recommended filament: PETG (on behalf of my cousin's son) deutsch 2 Versionen: mit oder ohne äußerem Aufsatzring empfohlenes Filament: PETG (im Auftrag des Sohnes meines Cousins)
The funnel threads onto the water basin. This is for the 6 cup/shot Bialetti Venus. They are tested on both the Induction- and the Camp fire versions. Also check out my funnel version for the 4 cup/shot The print settings I used: 0.2, 3…
Funnel to make filling coffee into the filter easier and reduce spillage. Can be rotated to level the coffee grounds. Designed for the 3 cup Bialetti, with 65 mm of outer thread diameter and 55 mm of inner filter diameter. Might also fit…
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for paper carboard tubes 50mm ID when printed 1:1 scale that would usually get thrown away, this way you can form large dodecahedron lettice molecule-like structure for kids…
Drying stand for the 9 cup bialetti. Printed out of petg using 4 walls.
I made this hook as a replacement for a friend who bought a second hand Villa Paletti without it. Print instructions Category: Toy & Game Accessories Summary I made this hook as a replacement for a friend who bought a second hand Villa…
--English below-- Organizzatore per angolo caffè. Bicchierini (diametro massimo 59mm), zucchero e palettine in un unico posto. La versione in foto è stata stampata in PLA, layer 0.2mm, ugello 0.4mm, 3 pareti, infill 20%, con una vecchia…
A moka pot style coffee basket holder for the Bialetti Moka Express - 2 cup version. -Can be sized up/down to fit your basket size -Themed in the shape of the moka pot to blend in -Helps you hold the basked while putting your coffee in…
A mocka pot filter basket adapter for Wilfa Uniform grinder. Everybody knows that coffee goes everywhere, especially when trying to put it in a filter basket. This adapter allows you to fit the filter basket in the Wilfa Uniform grinder…
Mini Moka Apprentice – Training Tomorrow’s Barista Today! why struggle and work for great coffee? With the Mini Moka Apprentice, kids can start their journey to becoming your very own personal coffee-maker machine years before they can…
PETG Layer: ≤ 0.20 mm Wall: ≤ 0.8 mm Bottom: ≥ 1 mm
This is a replacement part I made in blender for the handle of the bialetti milk frother "Tuttocrema". First model btw. Is it a 1 to 1 copy of the original? - No Is it a piece of ingenious design - Meh Does it fit and work - Yes 10%…
I printed mine in PETG, with 0,7mm extrusion width (0.4mm nozzle), 0,25mm layer heighth and 3 BOT layers using vase mode. The result needs only a bit filament, is light but sturdy enough and has an opening which fits common coffe spoons.
Il modello presentato può essere rimpicciolito o ingrandito in base alle esigenze personali. E' una formina per la predisposizione della sfoglia di pasta fresca da utilizzare per la creazione di Tortelli (con zucca o altro), Tortellini…
