Counting matching models…
Resized to Barkleys Case for candy Barkleys; Altoids 6 compartments https://www.thingiverse.com/thing:2434938 Print instructions Category: Organization Print Settings Printer: K8400 Rafts: No Supports: No Resolution: 0,1 Infill: 25
Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant
Once I bought some pulleys to hold my ladder up to the ceiling, but they were not strong enough one day they broke. So I designed new pulleys, and I designed them in such way outside would look the same, both halves would be the same so…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for PETGSource material: PET
Credit card size card with shopping cart tokens in wallet
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
3 compartments version: https://www.thingiverse.com/thing:2422188 Print instructions Category: Organization
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
This is remix of https://www.prusaprinters.org/prints/25657 . 3 long compartments. Print instructions Supports: No Resolution: 0,15 Infill: 15
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
Built a lowered acustic ceiling segment in my living room, with 20mm x 20mm aluminum tubes as edges. These are designed to be clipped on the edge, and form the cable management triangle in the middle. Two versions, hook design differes…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
For my previous design I added some rims to emmett's gear bearings , and I thought that this called for using it as a pulley - so for the mechanical marvels competition I made a pulley system (block and tackle) to combine 3 mechanical…
Pulleys GT2 - 20T created for 3D printing. For GT2 6mm belt. Created by dzino
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
These were made in Fusion360 and are free to use! The 3M and 5M pulleys have been tested to work on a number of pulley tooth counts however the 8M pulley is currently untested. Please let me know if you use them, if they help, or if…
Please Read Description Only thing to be aware of is the Z offset in Nozzle Settings! Currently set at 0 to ensure your bed isn't going to get damaged but for my machine its set to -0.12, First layer prints at 0.15mm so allowing for great…
Dragon from House of Dragon. This is the red queen Meleys. It is a version 1 model. Its dimensions are: 30x32x16 cm. I would recommend printing it on a resin printer. I plan to make every dragon from House of Dragon and Game of Thrones.…
After installing the 1.5GT belts and pulleys for the Gen2 upgrade on my CORE One+ printer, one of the new pulleys was rubbing on a curved guard built into the stepper motor mount. It made a hard-to-locate scratching sound while printing…
Two 32 teeth pulleys for 12mm HTD 3M (3mm) timing belt. The pulleys has the hard to find HTD profile and has god grip with the timing belt. One pulley is for the stepper motor 8mm shaft and the other pulley is for the 10mm key indexed…
We have gone one more level deep with this fully parametric Block and Tackle. There are 2 parameters to change: How many blocks do you want. Diameter of the pulley wheel. Included Design Files are 20mm 2 Block Go as big/small or large as…
Organizer insert that fits into Barkleys mint tins. (Or other tin with same dimensions, ~90mm x ~60mm) These have 2, 3, 4, 6 and 8 slots but I have also included a blank version if you would like to make your own compartment layout. The…
A parametric 5mm pitch HTD timing belt pulley made in Autodesk Inventor. If you have Inventor, you can download the IPT from here and change the "Grooves" parameter to get whatever number of teeth you want. There is also a "Height"…
Inspired by old cast pulleys this is a modular pulley system intended to be decorative, stackable, and for use with paracord. A 8x22x7 mm skate bearing should press fit into the center of the pulleys. 5/16" or 8mm bolts are used to hold…
A simple filament guide pulley. All parts are assembled without additional accessories, only filament and one bearing. The thread guide frame is a separate piece, so you can customize it to suit your specific needs. Tolerances are…
Servo splines suck - they're a mess of undocumented, almost-compatible manufacturer specific variants that are too finely featured to print anyway. Instead of trying to match any specific spline geometry I've added some slots so the gear…
This is a collection of parametric GT2 pulleys , optimized for 3D printing. Perfect for DIY projects involving 3D printers, CNC machines, plotters, or any motion system that uses GT2 timing belts. (Input your settings directly into the…
GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…
Universal design, but built for room-scale VR cable management. Works way better than simple cable retractors on their own. Simply hinge open a snatch block and insert a cable or rope up to 7mm in diameter (or 14mm for XL version). Then…
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope. Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about…
This is roughly inspired by a "SlipKnot Adjustable Rope Clamp", but is able to fit over a knot in the rope instead. Think of it like a fortified/inflexible inline knot in the rope. I am using this to limit the travel of a rope through…
add your prefered bearing (626ZZ) and glue the two halfs together with some super glue I have a SRAM Eagle AXS Drivetrain, everythings works well so far. I printed the pulleys with ASA
Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , racerethan , Prusa Research This remix was made for pulleys from LDO or Gates that have a thickness of 10mm. The original…
Simple tensioners for Ender 3 V2. Original internal pulleys are repurposed. Advantages in comparison with original ones: centered to avoid belt rubbing compatible with geared pulleys ≥20T about 6-7mm of additional Y-axis movement The goal…
The stamps are made to be as easy to grip as possible.
Overview This upgrade replaces the stock drive system of the low-cost China rock tumbler shown in the photos . It uses a fully printable TPU timing belt together with PLA/PETG pulleys (8.5 mm width) . The system is fixed-length , meaning…
Download the most up-to-date version on MakerWorld: https://makerworld.com/en/models/496553
This is a Wrigleys chewing gum holder for a car vent. You can mount it on horizontal and vertical vents as the mount can be twisted. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PETG Notes: Print…
Uses 6 x 3mm FHCS screws to pull tapers together to lock onto the shaft. Length depends on the shaft to Locking Taper fitment. You can easily add the female taper and bolt circle to another gear or something you've created in Fusion by…
Works better with a bearing but if you dont have any, then this works great to
Print 100% infill PLA works best
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope. Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the…
Just PLA will be fine for this print. It is designed specifically for Australian coins. These are only one and two dollar coin versions although you can expect some more designs coming for other coins. Let me know in the comments what…
The “flat” Pulley fits on a 5mm axle of a Stepper Motor with a flat spot. The “bearing” Pulley has 3mm “long” larger diameter on each side of the hole to push small bearings into it. This Pulley with the bearings can be mounted using a M5…
Simple lego compatible pulleys that work best with elastic bands (like rubber bands) to be used with your lego models.
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project. A project I call Building Blocks is designed for my nieces and nephews so that they could learn hard skills and test out…
ITEM light GT2 Pulleys groove 8 This GT2 Pulleys was designed for a DIY laser cutter project. It easily connects two Pulleys to an ITEM profile. Two pulleys can be attached to the bracket with M3 screws. The middle screw size M4 serves to…
This is a work in progress. This is the first time I am trying this design, no long term use information exists. It may not be viable over the long term. Use at your own risk. Two versions of a wire antenna corner pulley are provided.…
UPDATED - V2 NOW AVAILABLE IN REMIXES. You'll still need nut/bolt info from this model but if you want the TPU bar clip version then get the STLs from the V2 remix. ============================================================ This is…
The Phone Holder is specifically designed for JUCAD golf trolleys. It features cutouts for 5 magnets that secure your phone in place. To use the magnets, you will need a magnetic phone or a phone case that supports magnetic attachment.…
Set of smileys: smyles, joy, heart_eyes, sunglasses, stuck_out_tongue_winking_eye. Not support.
A. Easy printable. Size 7,4x10cm. B. Easy printable, size 5.4x5.4x10cm.
Pulleys and other parts for the daily manual and auto opening and closing from the chicken door.
EN: Custom sorting boxes fot workshop tools trolleys 3 sizes: 75x75x45mm 150x75x45mm 150x150x45mm The height is actually 43mm to fit felt drawer insert. Practical plastic sorting box for storing small parts such as nuts, screws, dowels,…
Scifi-esque remix of the longer 3C variant of the WE scar gbbr handguard that Shirley Productions recently released.
A simple gum case that fits Wrigleys gum packs. It protects the package and helps prevent the gum from going stale as quickly. The lid is labeled on both sides and the grips are the word “gum” in braille. The lid is meant to fit tightly…
Material selection: The outer hull must NOT contain any fiber of filler as this would shred the GT2 Belt. Material must have high layer adhesion i.e. Print 1 part and review fit of belt: It should fit perfectly when bend and slightly…
These pulleys have a v shaped groove so they can be printed without supports.
I needed some pulleys based on bearings I already got, but couldnt find any, so I made it my self. I printed it in .2 mm. I recommend at least to glue the parts together. It havent been tested yet, so please use commen sense and the use…
I created Portgas D. Ace's Hat Charms from One Piece for cosplay. It is preferable to print them with a printer with multi colour capabilities. Enjoy! Print settings: 0.2mm layer height 10% infill 4 top and bottome layer 2 walls ironing…
The belts kept working their way off two of the pulleys so this mod adds a little more of a lip to keep them on. Printed with organic/tree supports but may be possible without them.
Designed to be used with 0.5" hex shafts with support for WCP-1121 3d print adapters to add even more support. Tested to be a nice press fit :)
I have printed the pulleys, motors mount parts in Nylon The covers and enclosures are printed in Pro PLA. I printed the seal for the enclosures in TPU. It takes me a lot of time and a lot of beer to design these parts from scratch. If you…
Hypercube XY joiner with long clamp for GT2 20T pulleys Or printer is suitable for these if 10mm X axis 10mm Y axis both bearing (1x LM10LUU/2x LM10UU) and igus (rjmp-01-10) Use GT2 20 pulley Parts that you need for one assembly 20T GT2…
Here are three well-known Loves smileys! Attach three Print Profiles for Bambulab
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism illustrates the transmission of power by simple pulleys…
Pulleys with Hex Center designed for HTD 5 Belts. Motor specific files have lip to ride on inner race of bearings to not have wear. Number of teeth inserted on side of the pulley.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing Speed-pulleys are used for lathes and other mechanical tools, for…
Pulleys designed to be used in FRC, specifically used with HTD 5 belts. Number of teeth inscribed on side of pulley
Uses 2x ⅝” OD bearings. R4 bearings If using a standard number #10 bolt use ¼” OD 0.194” ID aluminum tube as a spacer https://www.mcmaster.com/catalog/129/190/9390N12 You can use a 1/4:” shoulder, 10-32 bolt which is the preferred option…
Water released from the gutter resulted in moss and algae growth in wet winter months. We wanted to capture the water directly into and underground pipe, not using a gulley. To blend in with the paving, I designed covers following the…
Blind pulley with chain coupling for better adjustment.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of transmitting motion from a shaft at right angles…
I was making some pulleys for a tension-sensing end-of-filament sensor (still working on it... soon). Yes, I ended up having to keep upping the diameter of the pulley since filament doesn't like to bend in small radiuses! But I thought…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of transmitting motion from a shaft at right angles…
I completely made this by myself but it is inspired by another model: https://www.printables.com/model/319649 . The wheel comes in three variations: for 6mm, 8mm, and 10mm axles. Hardware needed: 6 M5 x 20 allen (inbus) bolts 6 M5 nuts 2…
Print Print four parts overall. Each side consists of two parts facing eachother. 30% Infill and 2 bottom/toplayers are enough to be pretty torsion-resistant. BOM: 8x M3x12 Screws + Nuts 4x Toothless Pulleys with 5mm Bore Assembly The M3…
Disclaimer: I don't use this derailleur and just took the measurements of the new pulleys in case I ever need them in the future. I use almost the same 3D-printed pulleys for Shimano Deore, they ran more than 5000 km without any issues…
These parts are used to implement a spindle encoder on a 9x20 lathe using an Omron e6b2 encoder. This is useful if you are using a CNC conversion of the lathe. The LatheSpindleGT2 print replaces both the spindle gear and spacer. (assumes…
Suchen Sie nach einem innovativen und funktionalen Türstopper-Design, das Ihre Türen nicht nur sicherer macht, sondern auch Ihrem Raum einen Hauch von Eleganz verleiht? Mein exklusives 3D-Türstopper-Design bietet genau das!
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism differs from No. 1 in the substitution of a crossed…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing By giving a vibratory motion to the lever secured to the semi-circular…
Delta-Rockwell 1 x 42 Grinder/Sander Pulleys/Wheels. These fit the 31-350 & 31-351 models. Drive Pulley - PN: 926-11-991-9441 Rockwell 31-351 Drive Wheel NoTire v6 This is printed as one part, I printed with PLA , 90% infill, supports…
As a gift to someone who really loves The Mighty Boosh I had to create something based on the “You ever drink Baileys from a shoe?” joke in that show.
These little joyful friends watch over your print for you and visualize the extruder movement. The googly eyes used are 8mm in diameter. I have designed the visualizer to be a press-fit for the Creality Sprite Extruder, but i think most…
Upgraded to the Gt2 32 teeth pulleys and only to realized they don't fit at all. Designed a new Y bearing guide that offsets the 608 bearings back a few to make everything fit. By all means, go for a 18 or 25 teeth instead, don't make the…
Use in place of the token or coin, push in, pull out and it's unlocked. ABS 90%
These are two perfectly sized designs to be used when you want to get a trolley at the supermarket but you don't have £1.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism resembles No. 1 , with the addition of a movable…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing Cone-pulleys are used for the same purpose as No. 8 . This motion is…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism is a modification of No. 9 , the pulleys being of…
Gag gift cap-cover for a mini-baley's. Additional hardware required: coil spring 9.5mm D x 16mm (compresses down to ~7mm). Instructions: Grip firmly with the "spoon" (handle) pressed firmly against the bottle. Pull pin. With the handle…
Plastic string for Fish It Out Hamley's fishing rods Print at .2 mm standard without supports
I got fed up with reprinting this model every few months when the bar clip broke! I tried a couple of adjustments to the shape but ulimately PLA (even the PLA+ which I use) is just a bit too brittle to handle deformation to place and…
Háček #1719N na magnetické nástěnky Fleysen #1711 je jedním z dvojice háčků, kterým si můžete obohatit kovovou nástěnku, kterou vyrábíme v Plesné na západě Čech. Standardně je dodáváme včetně zatištěných magnetů, nicméně fungují i bez…
Háček #1719O na magnetické nástěnky Fleysen #1711 je jedním z dvojice háčků, kterým si můžete obohatit kovovou nástěnku, kterou vyrábíme v Plesné na západě Čech. Standardně je dodáváme včetně zatištěných magnetů, nicméně fungují i bez…
Another Token for Supermarket Trolleys is a simple and practical 3D model designed to replace the coin normally required to unlock shopping carts. Compact and easy to print, the token can be kept on your pocket, in your car or in a…
This sliding score indicator is prone to breaking and in need of replacement. Here is a replacement part that you print as needed. It can be scaled up or down depending on the wood thickness.…
Two crowned pulleys with a 20.2mm diameter at the thickest part. The taper angle is 10 degrees for the shorter and ~8 degrees for the longer resulting in the same diameter. One is 60mm long, 20.2 thick and has a hole for an axle that is…
Pulley set for Boffin motion II. Pulleys are multiples of the circumference of the smallest pulley to illustrate the gear ratio. Compared to the model photographs, it was modified so that the pulleys are multiples of the smallest one.…
Wheel replacement. In the 3mf file I added a modifier to increase the infill where it needs more resistance. I printed it in ABS and the chart can easily hold 90kg. 0.4 nozzle - 0.3 layer height - with support - 4 perimeters - 4 top…
A friend of mine has been using pulley blocks from RWO Britain on his boat. As the company no longer exists, he was unable to source replacements for the pulleys, which had become too badly damaged over the years. I’m a complete beginner…
Precision-machined double-groove V-belt pulley engineered with 38-degree wedge grooves, disc web reduction cavity, solid hub, and standard keyway. Клиноременный двухканавочный шкив с прецизионными трапециевидными канавками под углом 38°,…
