173 models
A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…
This is a part allowing to connect two one-hand type Wolfcraft clamp together to extend their reachibility. It is composed of : One connector Two thumb screws “cap” You will need in addition : 2 M6x30 (or longer) hexagonal head screws 2…
It is a fastening knob for wolfcraft dowelling jig part number 4650000. One of mine broken, then model and replace with printed one. Print Settings Printer Brand: Prusa Printer: MINI Rafts: No Supports: No Resolution: 0.15 mm Infill: 90%…
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. Print-in-Place verison The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy…
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy access. Printed in 3 pieces,…
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
Bosch FSN / Mafell rail guide adapter for Wolfcraft mini clamp Adapter to mount the Wolfcraft mini clamps (part nr 3455100) to Bosch FSN or Mefell rail guides. Cause not all 3D-Printers are perfectly calibrate I've attached the FreeCAD…
These clamps are attachable on Wolfcraft clamps, just remove the green plastics and pull on the printed clamp parts. Works great and helps a lot, when screwing boards in an 90 degree angle. Printable without supports. Use more than 20 %…
I printed the stand and the clamp height in PETG and the cap in TPU. The clamp I used was this one: https://www.aliexpress.com/item/1005004273070234.html?spm=a2g0o.order_list.0.0.7055180233096a
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Handle for the Gulfcoast-Robotics.com "Y Carriage" Y-axis tray holder…
Half case for the Leica M10. I had this SLS printed. You can try FDM printing this if you have good stringing control. This will not fit film Ms (no mounting point) or non-M10 style chassis Ms (thicc-er bodies). You will need 1/4" -20,…
For best performance the Benchdog has to fit closely. Due to different accuracies/ tolerances of every printer and perforated grid plate, I recomend you first print the "tolerance test". It is steped in 0.1 mm incremets from 19.7 to 20.2…
Wandhalter für zwei Anschlagwinkel von Wolfcraft.
Jednoduchý držák pro svěrky Wolfcraft (nejen) na systém French Cleat. Držák je připraven na šrouby M5 x 17 (já jsem měl větší tak jsem je seřízl) s maticí M5. Tisknuté na PETG vrstvou 0,3 mm. Tištěné s límcem 5 mm (přesto se mi držák…
Intended for use with the Gulfcoast Robotics Premium White LED Light Bar, this printable dimmer switch bracket provides a simple, yet clean mounting solution. It's compatible with 4040 (40mm) wide dual slot V-extrusions. used on the on…
Nice wolfcraft clamp holder with two bars :-) You need 2xKlemmzange.stl, 4xBacke.stl und 4.Griff.stl for each holder - see pictures. The holder is designed for rods/tubes with a diameter of 15mm. For thinner/thicker tubes please scale…
Adapter für Mini-Einhandklemmen Wolfcraft (passt auch für Duro) zur Befestigung in T-Nut-/C-Profilschienen. Ich benutze sie zur Befestigung von Werkstücken auf meinem Bohrtisch.
Two pieces that turn Wolfcraft one-hand clamps into vertical work table clamps for all work tables with 20mm bore holes. So it is not just limited to the Wolfcraft Master 650 table shown in the pictures, nor to specific table thickness.…
This is a slide-on extension for the Wolfcraft mini clamps (3455100) to compliment the Bosch Mafell guide rail clamp mod for those clamps found here: Bosch FSN and Mafell guide rail adapter for Wolfcraft mini clamp 3455100 von teslapunk…
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Remix des Wandhalters https://www.thingiverse.com/thing:4123401 Ich habe die Länge des Halter verlängert. Vielen Dank an den Ersteller des Originals. Der Connector sitzt sehr gut auf dem Halter.
See the new and improved revised model here. Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast…
I made quite huge corner clamps for my workshop, so I may share it. I printed with no top no bottom layer to check if it gets damage over time, since it's the first time I designed those. Recommended: PETG 3 or 4 perimeters (4 on picture)…
Držák pro dva úhleníky Wolfcraft k zavěšení na děrovanou stěnu Mars Svratka. Tištěné na výšku s podpěrami pro zadní úchytky na filament Prusament PETG Ultramarine Blue.
Replacement jaw for my wolfcraft microfix mini spring clamp. Recommand to print with 0.2 nozzle. Would be better resolution with all details. On the picture is printed with 0.4 nozzle and is not so pretty. Print Settings Printer Brand:…
Eine FrenchCleat Halterung für den Gehrunswinkel von Wolfcraft. Im unteren Bereich auf der Rückseite habe ich einen Steg eingebaut, damit der Halter nicht zu leicht ausgehoben wird, wenn der Gehrungswinkel entnommen wird. Vermutlich passt…
Aucune difficulté particulière : Fil ABS (pour la résistance) , pas de radeau et support. Infiltrations : 0,2
Material PETG Sterngriff M6 * 10 Unterlegscheibe 6,4 * 20
What is this? A quick replacement pad for the Wolfcraft Microfix clamps. The first thing I did when I got my clamps was break out the callipers and model the pads tips, the originals are a hard plastic, I have printing a few replacements…
Corner Brakets for WolfCraft Pro Medium Clamps
I designed the side stop in Fusion 360 using shape and size of original part Printed one in Recycled PLA for prototype/test. I used 0.20mm layer height, 4 perimeters for extra strength and supports for knob location. I used “Paint-on…
please be aware that this model is still work in progress - I made some mistakes during design, something is not as perfect as it could be. Eventually the design will be improved.
This is the 2 Piece version of my One-Hand Clamp Mod which allows the use of Bessey EZM or Wolfcraft Pro M directly on your perforated grid plate Workbench. The “fixed” jaw slides on the clamps rail and allows the rail to be pushed into /…
This is a quick and small jig to help you re-align the WOlfcraft 4650 ruler doweling jig to previous drilled holes, in case the shelf you're working on is longer than the ruler itself Just clip one or two of these blocks into the first…
Wandhalter für den Gehrungswinkel von Wolfcraft.
Supports muraux pour 2 serres-joint WOLFCRAFT PRO L 3030 - Valide pour toute la famille de longueur
The original cap provided with the Wolfcraft 4195 precision knife frequently fell off, which inspired me to create a more secure replacement. This process eventually led to the design of a new grip that firmly secures the cap and offers a…
Supports muraux pour 2 serres-joint WOLFCRAFT PRO M3456 - Valide pour toute la famille de longueur
I've got an original Ender 3 with the 2040 Y gantry instead of the 4040 Y gantry. There are virtually no easy-to-use dual linear Y rail kits that work with the 2040 rail. I had bought a Gulfcoast Robotics 3-point carriage , and realized I…
his is an adapter to use the wolfcraft4650 doweling jig together with a makitaRT0700 /DRT50 router. So you can use the router to create any holes in the 32mm system. It has a perfect fit to the plunge base 195563-0 and is fixed with the…
I used the linkt clamps as inspiration and designed them to fit at the small clamps. The parametric files are available at the following link.…
EDIT: The company that made this lightbar is out of business. I am leaving this up in case anyone still needs it. This will allow you to mount the Gulfcoast Robotics LED Light Bar on the top rail of the M5. It is almost a perfect fit end…
Various upgrades for Wolfcraft dowelling jigs and cheap clones Thumb screw Let's you (un)tighten the depth plate/fence without any tool Print two of these and use M6 bolts in place of the provided flat-head ones Depth plate Flat depth…
The Wolfcraft Master Work 1600 MFT Working Table is a competitively priced and well built MFT style work bench that has many pluses but one big minus in that it does not have a T Track slot like many other MFT work tables on the front and…
Remixed using https://www.thingiverse.com/thing:3800185 https://www.thingiverse.com/thing:1520678
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
Aufnahme für Makita Handfräsen vom Typ RT0700 auf die alten Wolfcraft Bohständer. Kann mit der original Schraube befestigt und im Raster gedreht werden.
I got annoyed with finding the right scraps to support the guide rail ends for the clamps for making my cuts. So I designed this simple guide rail lift for the Wolfcraft Master Work 1600 (to be fitted on the long table side, the one with…
The Wolfcraft miniature one-hand clamp ( EHZ-Miniature-One-Hand-Clamps ) is hollow under the soft rubber (teal) jaws. When clamping something smaller than the jaw itself, there is a good chance that the thing you want to clamp falls…
Bench dogs for all work tables with 20mm bore holes such as Wolfcraft MASTER tables. Two pieces, the clamp can be used on its own to fix things on the work table. Optionally you may insert the tip into the clamp, that way you can use it…
Die Anschläge der Wolfcraft Dübelleiste lassen sich nur in Schritten von 2 mm verstellen (das wird bei den Angaben leider verschwiegen). Diese Abstandsadapter lassen Zwischenschritte von 0,5 mm - 1mm - 1,5 mm zu. Einfach auf die Winkel…
Clamping range extender for wolfcraft master workbench. Clip-on for the original accesories. Designed for easily extend your clamp range with an extra insert. Printer: Ender 3V2 Material: ABS Resolution: 0.2 wall: 2 infill: 50% supports: No
A spare part for Wolfcraft Workbench (wolfcraft MASTER 200 Clamping and Working Table I 6177000)
Solid clamp holder for Wolfcraft Clamps. The standard version can hold up to 4 Wolfcraft Pro with an outreach of 65 mm. The XL version can hold up to 2 Wolfcraft Pro with an outreach of 90mm.
This clever adapter lets you combine 2 one-hand clamps
I had spot holes to make in my bathroom and I needed a dust collector.
Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap…
Keeps doweling jig (2 parts) and two sets of drill bits with stop collars (6mm, 8mm, 10mm) and allen wrenches. Filament: Nebula PETG Transparent
Adapter to connect the Wolfcraft Mini Clamps to the Bosch FSN Rail Guide - optimized to be printed in an upright orientation to give it more stability in the direction of the tensile force coming from the clamp. Version 2: I was alway…
Einfacher Halter für die Wolfcraft Mini Einhandzwingen für die Wandmontage oder für die French Cleat Leiste. Es sind Leisten in 14,5mm und 17,5mm beigefügt Es werden dann zwei M4x20 Senkkopfschrauben und zwei M4 Muttern benötigt.
Spojeni dvou sverek a prodlouzeni jejich delky profil sverky 20x6 mm ,prumer sroubu 6mm delka 30mm. Material Petg vypln vyzkousena 80%.
A collection of different wall mounts, will increase it over time.
So I have two of these Wolfcraft clamps and a while ago one had a broken spring. It didn't work anymore which is why I came up with this repair kit. The kit consists of the two printed parts as well as three parts you need from the…
This is an adapter to use normal Wolfcraft Pro L one-hand clamps for laying wood or WPC decking. Dies ist ein Adapter für normale Wolfcraft "Pro L" Einhand-Spannzwingen, um diese bei der Verlegung von Holz- oder WPC Decks einzusetzen. Am…
Utiliser sur table de sciage Wolfcraft Mastercut 1500 mais compatible avec toute table dont l'écartement entre plot est de 140mm. Il faut utiliser des vis à tête hexagonale M5 de 18mm (22mm avec la tête). Le système est composer d'un…
Das ist eine Adapterhülse für den Einhandzwingenverbinder von wolfcraft, damit lassen sich auch die Einhandzwingen 3456 und 3457 verbinden
I printed two of these to hold my Wolfcraft Square 5205 - Universal Angle & Try Square On my design the square hangs on the vertical. I'm using M3 screws with flat head The holes on the outside are bigger to fit bit holder for the…
Wolfcraft Snap-Off Blade Knife 18 mm, no. 4138000 I made this model to create a Gridfinity bin for myself. Everyone's Gridfinity is different, so instead of a particular bin, I'm sharing the model itself. Use this as a tool body to…
Mit dieser Schutzkappe für die Wolfcraft 2164 Mehrkranzlochsäge kannst du das Werkzeug problemlos in deinem Werkzeugkoffer lagern. Die Kappe schützt andere Materialien und dich selbst vor Verletzungen beim Verstauen. Die Schutzkappe…
Easy to print bin for the gridfinity system. It stores the Wolfcraft undercover jig.
Modified brackets for Wolfcraft 4650 doweling jig. I did not like fiddely setting depth on original brackets, so I made set with fixed position for 18mm wood thickness. I also added slot for clamps (Wisent in my case), so clamps can stay…
Table saw fence locking mechanism for Wolfcraft Mastercut 1500. ABS is preferrable over PLA. Category: DIY
Wall bracket for the Wolfcraft internal dimension adapter for folding rules EAN: 4006885522305 This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/bCtQH1FdYzY I printed them on an AnkerMake M5 in 22 minutes…
This is a remix of the Gridfinity Wolfcraft Pocket Hole Jig where i added magnet holes
This was done to have a very tight fit with my saw. So if you decide to print this remember that not all printers have the same tolerances nor all saws are made the same, so some sanding may be required. My saw have a clockwise rotation.…
I bought the Goldcoast Robotics LED light bar for a Creality Ender 3 Pro and did not see they had a switch mount available, so I made my own from scratch. I list it as a remix as mine is similar to their original but has different screw…
Keyhole Pegboard holder for my wolfcraft silicone gun. The Pegboard-spacing is 45mm. Prints without supports.
Die Spannbacke passt auf beiden Seiten. Das verwendete Material ist TPU Flex Medium . Schichthöhe: 0,2 mm Perimeter: 4 Konturhüllen oben: 4 Boden: 4 Stützen: keine Fülldichte: 20% Füllmuster: Gyroid
Die Spannbacke passt auf beiden Seiten. Das verwendete Material ist TPU Flex Medium . Schichthöhe: 0,2 mm Perimeter: 4 Konturhüllen oben: 4 Boden: 4 Stützen: keine Fülldichte: 20% Füllmuster: Gyroid
I have uploaded two versions of this, because I noticed that it still has quite the clearance between the board and the Wolfcraft. Because of this I created version 2, which I didn't test jet. Recommend maybe glueing the hook and the…
Created this remix for the Linear Rail made by Gulf Coast Robitics
I was making a shelf that needed dowels in the end of a 16 mm MDF panel board. But the drilling guide from Wolfcraft that i had, had a triangle end that made it impossible to center the tool, so I made an insert the fir inside the guide.…
This is a remix of the clamp storage adapted for Ikea Skadis system.
The model on this platform is discontinued. Head over to MakerWorld to have fully customizable version directly in your browser: https://makerworld.com/en/models/861353-wolfcraft-drill-holder-french-cleat-frenchfinity
covers only the display, not the keyboard Category: Electronics
This is my quick and dirty try at solving my two main issues with default pins - they are usually too high and I need four of them to securely mount rectangular item (sanding….). They are 10mm tall, but 5mm tall at the sharp edges and…
Gridfinity Holder for Wolfcraft Drill Chuck (Hex-Bohrfutter) 1x1x6 Modell 2625000
Description This tool was born out of pure necessity! While renovating my bathroom, I needed a small tool that I can hold with two finger to smooth out the silicone caulk bead. I had the repair kit from Wolfcraft, but the handle was too…
Fence for centering the Wolfcraft undercover jig on a 48 mm slat. The base of the jig is 60mm wide so the fence currently reaches 6 mm inwards. Fusion 360 included for easy remixing.
REVISED - Extended cable clip to work with the Gulfcoast Robotics Z-axis Linear Rail Kit ; this is a little deeper, retaining the cable fully. This was modeled off the original file from Gulfcoast Robotics, and fits the Z-gantry…
Case for easy access to your wolfcraft mini 30 spring clamps . Has space for up to 16 clamps. Step file for base clamp container is included for ease of remixing. Note for small printers : The side panels are designed to be easy to…
To attach holder to HSW use insert-with-M3.stl part from original Honeycomb storage wall and screw together with M3 bolt. Part 2 screw together with insert and then is part 1 and 2 glued together.
The endstop for my drill press was broken, so I made a replacement. There is space for an M8 nut to be inserted from the inside. The whole shebang is then clamped to the drill press via a M8 bolt. Print instructions I printed this with 5…
Przy użyciu wyżynarki ostrze się kołysało. Przy użyciu stabilizatora i zamontowanym długim ostrzu można śmiało ciąć :) Do wyżynarki Boscha i ostrza Makita A-86315. Trzeba przesunąć mocowanie włącznika stołu. części można wydrukować na…
The original camera arm kept hitting my hotend, so I made the arm slightly longer and a modification that allows me to design and snap-on different arms without having to remove the entire bed to do so.
Welcome to the world of DIY organization! Tired of searching for your trusty stubby screwdriver whenever you need it most? Fear not, for we have a fantastic solution for you: the 3D printable screwdriver holder, designed specifically to…
This is a cool happy wolf cub, hanging on a string (or a necklace if you make it small enough) ; you can use any material to cut it (i did mine using 3mm MDF). I was inspired by Physics_Dude:…
