Counting matching models…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
*Edit 10/8/23 - Non-AMS/MMU Version now available! This haunted house opens up to allow the addition of an LED tea light candle. Check out my other holiday models here . Print Settings & Assembly The roof requires a very small amount of…
Christmas tree with stars with separated LED tea light holder trunk. 2 stl are provided for the trees : one for vase mode and one for normal mode printing. The vase mode is easier and faster to print (on the right on the pictures -…
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Light bar for the Prusa MK4 available in single and dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
TL;DR A little fast printable moon lamp cover to put over a cheap LED-Tea-Light. Mentioned on YouTube: Many thanks to Chris for presenting the model in his nice channel. More stuff for IKEA moon fans:…
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Printing: The pine cone lampshade was printed with only one perimeter. A modifier and a negative volume are included in Prusa Slicer project file to create a geometry that can be clamped in between the two lamp holder parts. Please see…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 35mm x 27mm 6mm Keyring hole
Light bar for the Prusa MINI. Mounts are designed to fit 11x24mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mount also includes an opening to insert a…
Lighthouse Island in LowPoly style ! MANY OTHER FREE MODEL HERE --> https://makerworld.com/en/@robix93/upload Filament used --> Eryone PLA Glitter Purple
UPDATE! This model's license has been updated to Public Domain, and now allows for sale with zero royalties. I do not own any rights or licenses to Star Wars intellectual property, so sell at your own risk. --- This pool noodle lightsaber…
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Lighting cable saver for standard Apple lighting cable. Suitable for USB-A to Lighting cable ( does not fit newer USB-C to Lighting ). The cable saver clips together to completely protect the cable. Print instructions I printed this in…
DISCLAMER This is a non-commercial model for personal fun made for serious Star Wars fans by a serious Star Wars fan. I've shared them for free as a way of giving back to the 3D printing community. Plese Do not sell either the files or…
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Very easy print. Standard print settings, just dry your filament and print at 200 to avoid stringing.
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Twilight Sparkle from TV serial My Little Pony model has extra support for tail Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Dart Board LED Ring. Parts-List and Instruction follows.
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…
Mount and display your favorite bic lighter on the Honeycomb Storage Wall
Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…
Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/lockheed-p-38-lightning/
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…
Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…
Print with a low temperature roughly 195C
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Perfect light for your micro model's workstation. Almost everything is printed. You just need a 2m LED strip - for me this works just fine. It is cool white and it comes with a wall plug and a dimming function as well. The best on this…
This print was designed just for fun, and to see how a 3D printed lightbulb would look. Turns out it looks pretty much like a regular light bulb! For best effect, print in two colors, solid (ideally gray or silver) for the first 10mm, and…
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Remix of Bugman_140's Modular Lamp Cauldron. I made it smaller and modified it so it would house a 37mm LED tealight. the base is now separate legs that glue on.
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…
You probably know all of these cheap lights that contain GU10 lamps. Most of these lights are kept very simple and can easily be converted to economical LED light sources. Compared to halogen spotlights, LED lamps not only have the…
This design is an 1/8 scale model and will compliment my design of the Brewster Bomb Rack of WW2 used primarily in the Pacific Theater by U.S. Marine Corp aviation units flying the early F4u Corsairs. You will need to purchase 2 sizes of…
The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.
The LEDs on a stock MMU3 are difficult to see unless looking directly into the holes, especially when viewed from the front with the MMU mounted at the standard angle. These light pipes and lenses disperse the light over a wider angle…
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…
This is a remix of a very nice comcept of a lightbar that moves with the Z axis. If you like my model, please consider -> https://buymeacoffee.com/teacherribeiro If you like my model cheCk my 4010 mount for ender 3 V3 SE Printing…
APOLOGIES to the first dozen or so people who viewed this. I uploaded an error that is now fixed. I've printed now the “Lego Lightsaber Hilt (Human Scale)" by ReProps several times. This model addresses a couple little issues I had with…
Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.
I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…
This is a remix of @MaxTs Slightly Over Engineered Trash Bag Roll Holder with additional door hooks that allow the holder to attach to any standard Ikea kitchen closet door without any glue or screws. The door hook's inner dimension is…
A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…
I do use an enforced support for the center part of the shell only. (see pictures)
LED strip mount to clip a light strip in a 45° angle. I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet. The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a…
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
This is a protective cover for the Milwaukee 2367-20 M12 ROVER Service and Repair Flood Light with USB Charging.
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Testing and modeling different geometries. This one can be used as a tealight... 7Corner Structure. Bends one time horizontaly on the outside surface but not on the inside. This small manipulation results in an interesting star shape! I…
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Can't press any buttons no matter how hard you shake the case, therefore protects the fragile switches when carrying the mouse in a bag. Logitech is using bad quality switches on this mouse (google: G604 double-click) which break even…
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Light power is about 350lm depending on the used lamp For assembly you will need switch usb charger pcb (If you don*t need usb, use onlylamp.gcode/3mf file ) Makita battery terminal Led lamp MR16 MR16 lamp soket bolts M5 - allen flat head…
Have you ever wanted to equip your random "plug-in block" figures (Lego) with a lightsaber, for epic lightsaber battles? Don't necessarily want to buy a whole Lego set to do it? I have not the solution, have fun with the fights ;) And…
In prusa slicer I recommend turning on seam position to the rear (under layers and perimeters) when making a bunch of these keys. To me it looks more tidy than random seam breaks around the keys. For the top of the key turning on…
Replacement for your broken E36 headlight tab. Suggest printed solid for improved strenght, then soldered on to the headlight
This is an LED light bar for a Original Prusa Mini. This light bar is powered by a 12V power supply and can be dimmed. It mounts to the top of the Z axis using two M5x35 flat head screws. The stock screws are M5x15 button head. The…
Lost a plastic cover for Citroen C4 Spacetourer. Printed from PLA works for 3 years already. But I advise to print it from TPU or some flexible material.
Create your homemade LED tealight for lighting 3D printed decorations. All you need is: white filament (I used PLA) black filament (I used PLA) LED 3V 3mm CR2032 battery Assembly instructions: Bend longer leg (+) of LED accordingly and…
Stranger Things Light Wall Alphabet decoration.
Proven on the trail, this is a convenient and lightweight solution for hydration in the outdoors. Great for work or school, too. Attaches with a standard zip tie that tucks into a recess to hold it in place and out of the way. Hook it to…
This is a model of Blight Manor from The Owl House. The model is 106mm wide, 90mm long and 120mm tall. I could not find any images of the backside, so I had to come up with that by myself. Print Instructions Printed at 0.2mm layer height.…
The Arrow of Light is the highest rank in Cub Scouting. Packs may hold a special ceremony to honor the Cub Scouts who have earned their Arrow of Light rank. The Arrow of Light is also the only Cub Scout badge that can be worn on the…
Fits two Saitek Logitech throttle quadrants to mount flush wether as side quadrant or overhead. Units securely attached with aligned screw holes. Tight fit- hold both units together when inserting as there is a dimple/recess on the sides…
Hello all, I have an Ender 3 v1.0 for a long time now and just finally got the time to learn to model things for printing. Picked up Fusion360 and decided to go and model things to learn more. So I went ahead with a plain lighter cover…
This model is an easy long print, although be aware of warping! A default 0.2mm will do fine with a 0.4mm Nozzle and Perimeters set to 3. Recommend PETG, not PLA. Used filament in the picture; Extrudr PETG color “Dessert Storm” At first,…
A genuinely universal mount to the amazing Xiaomi Mi Computer Monitor Light Bar (and probably Yeelight Bar Pro)! With this mod, you can mount almost everything on top of your lamp and keep your monitor aesthetic and clean. For me, it's a…
Just remixed the MMU-Model to fit my 17x7mm Aluminum U-Channel I used this U-Channel: https://www.amazon.de/dp/B07549D36V (German Amazon) Print Settings: 0.20mm QUALITY Layer Height: 0.20mm Infill: 15% Gyroid Supports: Build plate only…
max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…
These are just some cool legs and a simple way to hold a light bulb. It is made to fit one of those IKEA bulb sockets.
I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution BUT a design that wouldn't interfere with my saddle position being pushed totally forward like this one would . So,…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
