Counting matching models…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…
A copy of the Invisalign aligners case. Each hole fits two 5x2mm magnets.
Ensure precise alignment for your magnetic build plate with these guides! Never worry about misalignment again. No screws and no need to remove the build plate at all. This 3D print guarantees a perfect slide into position every time,…
This basic tool help checking the axes alignment after a disassembly. Ensure You are printing it on a not skewed printer. How to use: Raise Z axis over 100mm from home Insert the base fork in the Z Axis rod and insert the Z lock then…
Elevate your bead crafting with this duo for standard-sized beads! Showcase Bead Buddy Aligner: Quickly aligns beads with a simple 5 second shake. Saves time during bead prep. Tweezers: Enables precise placement of single beads on your…
1.PRINT IT 2.SNAP IT 3.ROTATE IT 4.PRINT ANYTHING BETTER Stop squeaky noises, mesh bed leveling errors, Z wobble, Z axis errors on the Prusa mini+. No tools needed to install this printer upgrade. It might seem useless for some, but I…
Passage à niveau multi-pièces. Pour emboiter la rampe sur les bandes (queue d'aronde) je place l'ensemble dans un étau. Bonne impression
Stop the noise from moving your Z-axis! Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2…
These guides makes it easier to align a magnetic steel sheet onto an Ender 3 or similar printers. Compared to previous model, this has a tighter fit, and I added more space for the wiring. I made an alternate rear-right model for…
Version 2 is stiffer and works a bit better! If you have Invisalign, Smile Direct, or other aligners, it can be difficult to remove them sometimes -- especially if you have attachments that increase the tension in the aligners and create…
This is a build plate aligner for Neptune 4 Plus. Installs in the rear left corner of the bed. Allows attachment of cable chain parts to the bed cable (optional). Uses the original screws. Unscrew and remove the cable retainer plate,…
I was inspired by the " Dental guard box " by KeepTheBOX , however I wanted a few changes so I redesigned one from scratch. Main differences: This one is smaller, has shorter bridges in the hinge, no filet on the underside, thicker…
This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear…
Orthodontic aligners removal tool - Remover per allineatori ortodontici Now available in an enhanced ergonomic design for greater comfort and ease of use. New & Improved: Redesigned for better grip, smoother edges, and effortless aligner…
Got a CR10/Ender 3 with a Magnetic Steel sheet? Hate aligning it? Me too! This mod screws in above your springs/ spacers, and gives you the best alignment possible for your bed, similar to a Prusa. Can work in conjunction with TH3D Cr10…
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
A clip-on piece that automatically aligns the bed. Remixed from original to eliminate the need for supports.
Simple alignment clips for helping to hold the board tiles together, in case you have warped tiles. Works for both Frosthaven dungeon tiles and the Frosthaven campaign map as they have the same thickness (2mm) Hex aligner version is…
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
This has been requested a few times so i decided to post it. It does fit a little loose, but it works. I do not have this printer anymore so I cannot make the adjustments.
I wanted to make a plate stop/aligner for normal ender 3 build plates to be used with the K1. I don't have any ABS atm though, so I can't test it. If anyone wants to beta test it please give me your feed back. To install it you should be…
Used for checking alignment on both sides of X gantry made for the VzBot CoreXY 3D Printer Tension belts on both sides until linear rail lines up with aligner
This aligner removal tool is designed with simplicity and durability in mind, perfect for daily use with all popular brands like Invisalign™, Spark™, and more. Featuring a smooth, no-sharp-edges design, it ensures a comfortable experience…
Easy Install version Snap-On set of bed sheet aligner Just replace the existing cable gland cover Could be compatible with other models of the Ender series To prevent it from defoving with the heat of the bed, I recommend a 80% filling
All in one solution for nozzle brush, flex plate stop/alignment and poop bucket. I designed it primarily for use with TAP where the nozzle is barely able to reach brushes since TAP pushes the nozzle forward. So i positioned the brush…
Aligned Carrier Plate Pairing for Qidi Plus 4 The Qidi Plus 4's stock carrier plates have bearing mounts that are misaligned from the factory. See the cutaway photo provided. This cutaway is taken directly from the STEP files provides by…
Update 2024.06.19: Added a variant that can fit several models of accelerometer: BTT S2DW 1.0 (tested) BTT ADXL345 v2.0 (tested) Mellow Fly-ADXL345-USB (untested; should be OK in REV6) GY-291 / SparkFun ADXL345 (SPI) (tested) GY-521…
Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2 minis and didnt want to disassemble it to…
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
A little print for sheeta alignement for the LDO Voron 2.4 kit, so the Steelsheet sits perfekt on the bed. Best printed in ASA-CF because of the bed temperature
I really enjoyed Hawwwran design , so I remixed it to add a bit more depth. Also added a new version with a slope so I can align the book with a swipe. Credits Bookshelf aligner by Hawwwran
It always bothered me that you can't align the magnetic print sheet on the magnet very well on the V-core 3. With those small prints you can now. They are simlpy slid on the back edges of the Bed plate and clamp themselves into the unused…
This design is plain, however it can be personalised by adding a name along the front.
Impression toute simple.
Tool for precise drilling of holes and countersinking when drilling 18 mm boards. The drilling guide has the option of a stop when it is 25 mm (1 inch) from the edge. The corner aligner adjusts the boards exactly to the edge. Simplifies…
This alignment piece will help you achieve the same result time and time again if you have a batch of the same products to laser etch, one after the next. This will allow you to set the origin once, laser the product, set new product in…
These clips are useable with the newest version of the Creality K1 / K1C Unibody Riser: https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Update 2024-10-25: With the latest version of the Unibody Riser you do not need…
Just print two of them and that is it.
Remix of the Neptune 4 (Pro) bed plate aligner by @true_2030893 supporting the standard ADXL345 accelerometer.
Simple print that attaches to the top extrusion on the Ender to help with aligning dual z motors
Print Settings Printer: Creality S1 Rafts: No Supports: No Resolution: 0,20 Infill: 100 Filament: ABS, PLA or PETG Category : Tools Made With Blender 4.1
Just a simple PEI sheet aligner for the Anycubic Kobra 2 Plus. The aligners are bolt on to the bed. Remove the bolt on the top right and top left of the bed and take out the buses (be carful with the foam) puss the Buse in hole of the…
This is a super simple, small and quick bed aligner that works with any printer! Just attach some double-sided tape or glue to the bottom and you're good to go! There are liners for the side and corners, so no need to worry about the bed…
🇬🇧Here I decided to modify the start GCode of the Prusa XL 5 heads to be able to use the platter of your choice. The bleed line will be on the front of the plate, and no longer on the tabs. For example, for my part I use a lot of texture…
to adjust bent skadis panels and align them with others. Para alinear paneles skadis doblados
You can use original screw holes in the bed platform to mount those. I used self tapping screws, after drilling screw holes to 2,5mm (in the printed part). You could also use hole compensation parameter in the slicer (Orcaslicer has it…
You can use all 3, or just the two on the right also work great. There are clip-on versions which don't require disassembling the bed, and also regular through-hole versions. Parametric version The design is parametric, so you can adjust…
I have tested this on 3 printers with different colour filament a f3d file is attached if you need to make any changes i printed it with PLA which may warp after a while but wont be too noticable or affect it use
A little tool to help align labels and stickers when applying them. Align the sticker against the raised lip, and transfer to the tool. Then transfer on your product. Prints fine without supports, and on fast settings. You can also align…
Alineador de carrete (spool) lateral para la ENDER 3 V3 CORE XZ. Ayuda con la mayoría de las marcas de filamentos, a que se mantenga en su posición, y no se deslice y choque con los cables de alimentación del cabezal y la cama térmica.…
Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2 minis and didnt want to disassemble it to…
Simple model to keep the magnetic sheet and plate aligned. Screw no shorter then M5x12 (min 10 I guess) Threaded insert no longer then 7 mm. Feel free to use the step to modify. Chamfered version also available, probably prints without…
A small hook for Invisalign-like aligners to help you take it out of your teeth. Especially useful if you have short nails :) Category: Bathroom
A tool to help you align the T9 key when replacing a FEP foil on your SL1S resin tank. Other than that, the #1 advise for a painless FEP replacement is: get WERA 05028032001 TX8IP screwdriver. ____________ Printable on both MSLA and FDM.…
FR Supports permettant d'installer une cible pour le réglage optimum du faisceau laser sur une graveuse CO² disposant de supports miroirs et têtes Cloudray. Vous trouverez les fichiers stl ainsi que les fichiers pour imprimer une cible…
Hello! Quite a few printers require two or more belts cut to equal length. With belt lengths of more than two meters the arm length of a normal human being isn't enough to hold both belts on both ends to make sure they are nice and equal.…
Liked the cable drag chain for Kobra 2 Max but couldnt find the snap on bed sheet aligner for the Kobra 2 plus (only options for Kobra 2 neo / pro or remixed files which didn't work). So I decided to design and print my own. On its own it…
Hardly needs a description. Very quick printing little guide that helps keep the screwdriver drawer in your toolbox organized. Hole on each end if you want to screw then down in the drawer. If you're like me, your screwdrivers are all…
Print the main part and 6 “feet”. The feets are a tight fit. Let the print-plate cool down before removing the main part to prevent it from warping.
Clip for keeping filament aligned on Prusa spool
This is a modification of the work of two others. This version should fit and be aligned with the DragonBurner V8 toolhead. I am working on a TapChanger build and printed the origninal model earlier today and to my dismay the TapChanger…
Orthodontic aligners removal tool - KIDS LINE Key Features: New & Improved: Redesigned for better grip, smoother edges, and effortless aligner removal. For continuous use, it is preferable to use an antibacterial filament. For single-use…
Silicone spacers deform when compressed and sometimes even tend to lean if the support surface is limited by distributing the load force incorrectly. These aligners, having a more rigid and extended base, allow for some improvements: -…
Bed Glass + PEI Aligner for Ender 3 with nozzle cutout, no need to disassembly bed.
Improve your orbital sander's dust extraction by precisely aligning holes in sandpaper sheets. Helps stack discs in a very neat and organized way. Printing Rigid filament, 10%+ infill. Layer height doesn't matter. No supports needed, but…
Goes inside shroud to make the barrel and shroud more solid. V4 is looser on the barrel iirc
This is another take on tap guides or aligners. Instead of aligning the tap this one aligns the tap tool. You need a cross style tap handle with the jaws on the end of the shaft. Also you will have to scale the model to fit your tap…
I had some poor print quality on my MPMDv2, turned out the bed was sliding around from the nozzle movements. Print these to put push back against these movements. They are mounted under the swivel lock that hold the bed down. Make sure…
Remixed version of a dog waste box but with 90 degree alignment
Aligned to xyz. Scanned with the Revopoint MetroX
Spacer to force the screw into the middle of the oval mounting holes, like those found on Ubiquiti appliances. Materials and methods Print list: 4x 19inch-rack-aligner
Fasten the aligner with a piece of tape. The base desing is this: TOILET PAPER CLOUD
Pick tool for removing clear dental aligners/braces.
5/27/26 - Added updated version that moves the brush closer to the bed to gain back a couple mm of bed space
Bookshelf Aligner – Print, Slide, and Straighten! Looking for that perfect shelf presentation? This 3D printable Bookshelf Aligner makes it effortless. Inspired by a viral TikTok trend, it's a simple yet genius tool that glides across…
A modified version of donnyb99's great tensioner design. As some mentioned in the comments, the alignment of the pulley ends up raising the belt a little causing misalignment of the belt path and rubs against the v-slot aluminum…
Bed spacer on back right corner. Print in PETG or ABS ,ASA for higher temp applications. My parameters: layer 0.3 infil 100% Mounting on tesa powerbond (tested can withstand printing without any problem at bed temperature of 110 c and…
The original feet are offset , so i wasn't able to mount it onto one extrusion. https://github.com/Enraged-Rabbit-Community/ERCF_v2/blob/master/Stls/Gear_Box/%5Ba%5D_Gear_Box_Bottom_Panel
Remix of 4x Tweezers holder to mount on a IKEA Skådis Pegboard, remixed with better parameters to make it fit easy.
Sphere Aligner is a fully 3d printed tabletop game developed for the PrusaPrinters 2021 tabletop and puzzle game competition! The game uses a robust pinball style spring launcher to shoot spheres up though a corkscrew tube, into a stepped…
Hook for your Invisilign and retainers. Also great as a pick to remove debris from you molars before you put your trays back in. It's easiest to use at the back inside of the tray, this gives the most leverage for removal. It is designed…
During my fight against breaking idlers i slightly modified the x-axis to achieve better alignments between rods, bushings and timing belt. A T20 GT2 idler and a 3x18mm dowel pin as axis are needed.
I was looking for a fused y carriage since i figured it would take human error out of the assembly. Found one model on printables but it was poorly put together and wasn't even aligned properly as one half was sticking out the other. So,…
These are Zenpy's Frosthaven Map Aligners; I just added some little tabs to them to make them easier to print. Each piece has 4 little tabs that will help it to attach to the bed during printing; afterwards, just snip them off and you'll…
Insert the aligner between the rails and push against each other for the perfect fit. Sawing holder for triple rails included too. Thanks in advance for uploading the makes! Print instructions Category: Household
Barrel mount silencer / moderator / suppressor, for non threaded barrels. (F3D inlcuded to fit all). I tried a few other existing barrel mount stl's but one slight knock and they were no longer true so the pellets smashed the end of the…
This is a simple Aligner Sleeve to help you setup your Jumbling Tower (Jenga knock-off) game, since the boxed game didn't come with one. This sleeve is designed for 48 blocks, that are each 2.85" x .95" x .55" (72mm x 24mm x 14mm), making…
I just aligned the holes correctly to make it centered. I like the spikes that @NossonSternba_855068 added. Magnets needed: 8 x (8mmx3mm) It's important to align magnets the same polarity on one part. North up on either one of the parts…
Press fit spacers and alignment tool to make installation easier without pieces falling out.
This model is designed to correctly align the BambuLap building plates for the Kobra S1. This model is specially designed for the Funssor heating bed and bed carriage with 8 mm steel spacers in between. Print settingsPrint settings:…
The "original" lever had to much play - the gear was not aligned with the filament path. I solved it on the lever mount point for the gear (the mount point for the gear is now a bit smaller for a tight fit and pushed in the direction that…
adds support for nozzle wiper from the Creality K1 series https://www.aliexpress.com/item/1005008253210786.html?
The previous version was mis-aligned (at least to my Artillery Genius), by about 3-4mm. I re-created it from scratch in CAD and gave it a new angle to better support the cable. The crown height was reduced such that the zip ties can…
If you like the models, please like/favorite it! It only takes a second and helps out more than you know. Thanks everyone!
Monolith Ender 3 dual Z-axis aligner inspired by 2001: A Space Odyssey. I couldn't find proper tool to align my Z-Axis after installing dual Z-Axis mod for my somewhat modded Ender 3 Pro. The found solutions didn't quite fit for my use,…
