Counting matching models…
Two dispensers for 90mm & 83mm polishing pads. Can be mounted on the wall with two screws if needed. Print instructions Need to print those with supports on the bottom. . Resolution : 0.3mm Perimeters : 3 Infill : 20%
Model needs to be mounted to the bucket, it is best to make 2 holes in the bucket where we mount 2 threaded rods and the model itself is mounted with cable ties to the previously mounted rods.
Updates Decided to add the Updates at the top, so they are easiest to find for users that have already printed them, and are coming back for these. First of all, thanks everyone for the overwhelming support so far! A lot of you have…
Print in PETG Scale to needed size 100% 150mm Space if your Pads 160mm you have to scale to 107% 85% 136mm ! all parts must be scaled equally so that you can put them together !
I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. Modelled after a fender strat, fender tele and a squier strat. I suggest printing these in PETG for…
This design is a further development of my model 646358. Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a…
A simple 2 KW1 Key holder when using a Lishi Key Cutter to cut a key. A simple holder to ensure that 2 KW1 keys are aligned so that a blank can be cut to copy an existing key using a Lishi Key Cutter.
Hello everybody. Here is my first big project. Everything should be self-explanatory. The following are still required: arduino uno stepper motor Nema 17 stepper driver (some code from the Internet) 608zz ball bearings (the standard…
A simple 2 SC1 Key holder when using a Lishi Key Cutter to cut a key. A simple holder to ensure that 2 SC1 keys are aligned so that a blank can be cut to copy an existing key using a Lishi Key Cutter.
Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…
Gridfinity storage for Proxxon grinding and polishing tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .3 Infill: 20% Filament: eSun PLA Category: Tool Holders & Boxes
Watch band polishing vise. Mount your watch band within the vise to hold it in place while reworking it, polishing it or cleaning it. You need 1 M3 x 30 bolt, an M3 hex nut and an M3 Heat set insert to assemble. You can fit up to a 22mm…
This tool is intended to be used to polish/apply wax to cars with the help of a battery drill. The stem is 10mm (0,39 Inches), the primary disc diameter is ~70mm(2.76") , and with the extension disc its ~100mm (3.94"). Prints fine with…
Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Simple polishing plate for the drill... You will need an M8 hex bolt, a matching hex nut and self-adhesive hook tape. Print instructions Simple…
For storage of 4 inch or 4-1/2 inch angle grinder discs in 5.5 inch tall (or taller) drawers. Printing: No supports needed. This can be printed in a wide variety of materials. Recommended Materials: DURAMIC 3D PLA Plus Revision Log: Rev0…
I use this cheap kit to fix small scratches on my car but using the box to store them has always irritated me. This parametric organizer can be customized to fit other uses but is purpose built for this exact kit. It is sized to fit on a…
Designed in Solidworks. Part of our Proto-pasta Stainless Steel PLA Polishing Kit available at Proto-pasta.com. A great first print for polishing practice! Purchase kits at proto-pasta.com or check out a local 3D Hubs Workshop :-)…
These parts will assemble a working flat lap for rock polishing. The assembled parts drop onto a standard 5 gallon bucket to hold the drip water. It uses inexpensive 6” or 8” diamond disks and is driven by a 12 volt DC motor, all of which…
everything is fixed with M3 screws except the bearings which require M5. it was made to print easily without any supports. I did it myself to prepare my pieces for electroplating. I advise you 4 bars inside the jar for a good rotation I…
This tool is used in horology to polish the heads of damaged screws, this model is inspired by brass version of the tool, but modified to be 3D printable. The tool comes in two parts, the main body (Frog) and the bar which traps the screw…
Have you seen those cheap Chinese E3D-compatible nozzles? If you look at one in a micrsocope you will see pits and burrs on the tip. Well, I thought I'd make something to help me polish those nozzle tips, and make the nozzles actually…
Material: 44 g PLA+ print in place Druckereinstellung: Layerhöhe 0,2 / Infill 10 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / With Support Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / DIN933…
This project is just a simple two-part buffing/polishing wheel, onto which you just attach some kind of cloth or chamois with a rubber band. An M5 bolt is used as the shaft, just chuck it into your drill and start polishing. The top piece…
— Die deutsche Beschreibung gibt's wie immer unten!--- I designed this box for my sister so that she could have the tools she uses for nail modeling in one place. It offers space to store stickers, fleece, brush holders, cotton buds and…
Eng: Super simple polishing wheel to use with sandpaper or sponges with velcro backing It prints without any support, but the center hole needs to be punched out with the screw or cut out with X-acto knife. For the hardware, you need just…
Material: 44 g PLA+ print in place Druckereinstellung: Layerhöhe 0,2 / Infill 10 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / With Support Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / DIN933…
My daughter wanted me to make her a crown. She wanted me to make her a sparkly crown. I looked at RichRap's Sparkle Printing process, but don't have any clear PLA as I mostly use ABS. I also wasn't really keen on the idea of intentionally…
I had found a SC1 key holder but couldn't find one for a Kwikset KW1 so I decided to make one myself. Printed at .16mm or (Optimal Speed) in PrusaSlicer. Print came out with just the right tolerances.
Purpose: It’s expensive enough, having to buy a specialized lockpick for each keyway. It’s especially expensive to have to buy separate 5- and 6-pin versions for each keyway. So just buy the 6-pin version, and use this spacer when picking…
An insert for the Lishi Key Cutter. Heavily inspired by Deviant Ollam's recent video . Has storage slots for: -Lishi Key Cutter -RTT's Schlage Key Cutter Guides (download from GitHub here ) -Needle File -Decoder -Key Marker -Schlage Key…
Update: 02_04_26 Found the rock sludge was blocking up the drain holes very quickly so I have uploaded an alternative bowl with a G38 thread for a 10mm OD tube. Amazon link to connector: TA-VIGOR 10mm Pneumatic Push to Connect Fittings,…
The grinding pen is 16mm in diameter. Bits are 2 mm
Sanding and polishing dice requires flat sanding surfaces. So hand sanding on glass plates or pottery wheels is the solution. Sandingdiscs for drills mostly use velcro to attach sandingpaper to them and they have a softer base underneath…
Material: 22 g PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill P1-20 %, P2-40% honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / DIN933 M8x55 mm…
A DIY polishing station to smoothen 3d-printed parts built using Arduino and portable humidifier. Note: Only tested on Polymaker's Polysmooth filament and 70% ethyl alcohol. How I Designed This Polymaker's Polysher in combination with…
I printed the box in vase mode, and the cap normally - both of the methods worked fine and the cap fits safely on the box. I added a rounded part on the side in order to be able to grab just some of the discs with one finger, and not…
A simple holder for the Stedi glass polishing file 3 piece set (MS-43, MS-44 & MS-45 - UPC 768572026032) Each file slots into place using its original case. Keeps the glass files safe and easily accessible on my workspace and has an…
You've got some scratched game discs around that are not working properly anymore? You can use this jig to help you polish them. If you've tried polishing discs before you've realised it's a bit awkward trying to hold the disc with one…
Mini Wheel Sanding Disc for Rotary Tool (20mm & 30mm) A simple and practical mini sanding disc designed for rotary tools and DIY projects. This model is available in two sizes: 20mm and 30mm , making it suitable for detail sanding, edge…
When polishing any small part like the Glock safety plunger using buffung wheels on my grinder the part would at times go flying out and get damaged or temporarly lost. To help with that I create and print the Glock Safety Plunger Holder.…
Solid infill & 8 shell layers reccomended.
Print with layer height 0.2mm and 100% infill. Dimensions: 10cm x 10cm x 3cm
This is a tray to keep my Dremel felt polishing discs, grinding stones and polishing compound organized in my tool drawer. There are spaces for three sizes of the felt polishing disks and three sizes of the grinding disks. There is also…
Gridfinity holder/base for the Stedi polishing files. Pretty basic, not the prettiest but it works.
featured at 11:35, updated for better grinding geometry. New prints will be shorter for more compact setups. An easy to modify parametric rock polishing cup. You can order whatever size you want from places like Slant3D or PCBway. There…
Organizer for Novus polishing compounds. Hold the bottles so they don't keep tipping over.
This tool acts as a mount for Bergeon item BG7118 “Reload for comb”. It is essentially a replacement for BG7116 “Comb to card” with some modifications for ease of assembly, printing, and usability. Once assembled, you will be able to use…
Simply use your choice of epoxy to cement hook-type velcro pad to center round area. E6000 was used on prototypes and working design without any failures. Once epoxy is fully cured attach any 4-inch velcro ceramic…
Holds Dental polishing stripes for easier sanding/polishing
I purchased some cheap polishing wheels from my local “Wharf Carriage”. They came as advertised, 6" and for a ½" or ¾" arbor (two sets each of size specific plates). Not sure how you're supposed to match them up but just NO. The wheels…
Small polishing disk for drill. Requires 4 small screws, one bolt and a sponge. I used bison kit as glue for the sponge and extra second glue between te parts . You can also stick something else to it, such as sandpaper.
Holder for polishing discs pads 4pcs
This bin is designed to hold a small USB Grinding / Polishing pen, 30 bits/dies, 2 drill bits, 3 cutting blades and the collet for the cutting blades. The sort of generic off brand ones for sale all over Amazon and the rest of the…
Box for storage of polishing discs for 125mm orbital polisher. The internal dimensions of the box are 140x25mm. I printed the box from PLA. The cap is printed from TPU. Everything is printed with 0.6 nozzle. Does not require supports.
sanding and polishing backing plates that directly mount on any rotary tool added soft versions for fine polishing you may need to scale down the parts about 2-3% in case the fit is too loose
Segnalibro BAO Publishing. Layer 0.15 Riempimento 15% No Raft. No Brim.
Extra and modified parts for my build of the DIY Polishing Station. I used a Decor 12.5L Tellfresh Super storer as the basis for my version. During my build of the original DIY Polishing Station by chiz I found my humidifier was slightly…
Fine Sanding and polishing pads, to be used with self adhesive sandpaper or felt pads (or you can just use pva glue with regular sandpaper) steel rod cut to any length you want, diameter: 3.2mm for a snug fit (I used welding rods)…
Buffing and polishing wheel for drills — compact 50 mm version reinforced with an M4 × 25 mm screw
Turn your standard drill into a simple polishing tool. This adapter allows you to mount a car polishing pad directly into a regular drill or screwdriver. One side fits into the drill chuck like a standard bit, while the other side uses a…
This is my first version of a polishing station. I use it for polishing cast resin dice with 6 zona paper grits. It does require additional hardware to construct, as well as a motor. I used a spare motor I had laying around from an old…
lalalalalalalalalala Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.20 Infill: 100 Filament: sunlu TPU black Category: 3D Printing
I made a little organizer for my polishing paste and few felt/wool polishing discs tha ti use with it specifically 3 2-inch ones and another 3 3-inch ones and with space for a little jar that I use for a burnishing compound. #Maybe…
A stand simple stand made to organize different tools with spots for 6 different fine grit sanding pads(3200, 3600, 4000, 6000, 8000, and 12,000 grit), 10 small model files (half-round, full-round, square, etc.), 5 different glue…
This is one of the simple bit holders I've made for the Dremel bits I have, its a simple block with holes for the felt and sanding discs and holes for the tool mandrils. For now I have this simple one available but I do plan to integrate…
This files are for the 3D printed enclosure of the FuNIITriz, a microelectrode polishing machine, made with HDD motors and Arduino microcontrollers. More information about the project can be found at https://www.funiilab.com/funiitriz…
This print is intended to mount a Oura Ring Generation 3 in size 11 to a battery drill to polish (or mattify) it.
An adapter to attach the halves of the steel ball fidget to a drill for ease of sanding, polishing, or adding epoxy. It fits into the bearing space. If the fit is too lose to stay engaged while in use, use one or two layers of paper towel…
Specimen holder for polishing of standard specimens used at KMAT FJFI ČVUT. No special settings needed, printed on Prusa mini with PLA without any problems.
Polishing watch case backs by hand against a spinning wheel usually results in rounded edges and uneven finishes. Professional horological holders keep the part centered and rotating, but commercial tools are expensive. This model is a…
Fits 1/2" arbor bench grinders from WEN. Designed to be placed between the conical metal washer and the polishing wheel. Helps prevent the polishing disk from slipping on the arbor and ensures proper alignment. Print from TPU95-HF for…
Small box for storage of sharpal polishing wooden block and green paste
This is a covered storage box for 3-to-4-inch buffing or grinding wheels that are up to 30mm in width. The cover fits closely. To make it slide easier, I lightly waxed the sides of the wheel storage tray with Renaissance wax. That’s…
A special G-code for polishing the top of the nozzle using ultra-fine sandpaper placed on the print bed. The G-code instructs your extruder to perform five cycles consisting of numerous concentric circles, designed to utilize a larger…
Just a simple geometry rework of the bottom parts for better experience with FDM printers and ASA Polishing stands for acetone vapor smoothening so parts are suspended and not touching the bottom. Print these from PETG…
These are the official 44 Delta Lishi Spacer V2 models for printing at home. They add 4 mm of spacing to compatible SC4/KW5 Lishi tools for use with a matching five-pin lock of the same keyway. If you would rather buy them, the finished…
While sanding resin dice, I struggle to hold and keep straight the dice due to the small size. To help with this, I designed these knurled grips to make it a bit easier to do both of those. These are fairly precise to the size of my dice…
featured at 11:35, updated for better grinding geometry. New prints will be shorter for more compact setups. An easy to modify parametric rock polishing cup. You can order whatever size you want from places like Slant3D or PCBway. There…
Sanding and polishing dice requires flat sanding surfaces. So hand sanding on glass plates or pottery wheels is the solution. Sandingdiscs for drills mostly use velcro to attach sandingpaper to them and they have a softer base underneath…
For storage of 4 inch or 4-1/2 inch angle grinder discs in 5.5 inch tall (or taller) drawers. Printing: No supports needed. This can be printed in a wide variety of materials. Recommended Materials: DURAMIC 3D PLA Plus Revision Log: Rev0…
