Counting matching models…
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug. Design notes: The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've…
Updated Textured PEI Plate & PEO cool plate with new QR Code for 12mm label Brother P-Touch printer. It is useful if you have Lidar, so it automatically detects the installed plate. You will need P-Touch Editor in order to open the lbx…
This is a 2-gang wallplate with two decora openings. Designed to match Lutron Claro covers from a distance (same corner radii, but the screws aren't hidden). The Decora openings fit a Lutron Caseta dimmer perfectly with no gaps all around…
I needed a sideways-oriented cable pass through for my home theater, but none existed. I combined a couple of other models to create a wall plate with a large horizontal passthrough. 14.02.2024: Added V2 which increases the space…
I needed a heelplate for my Simagic P2000 pedals, so I designed and printed one. It can be printed in 2 parts (even on a Prusa Mini). You'll need 7pcs of countersunk M6 bolts: M6 x 20-24mm bolts - 4pcs for the 4 corners to fix the plate…
A simple Ethernet Jack adapter plate for Pass & Seymour / legrand Ethernet Jack.
Wall mount bracket for the Shelly Plus H&T, with the dimensions of a Niko Intense (Belgian) switch plate, can be fixed to standard in-wall boxes with a screw spacing of 60mm. After mounting the Shelly Plus H&T to the bracket, batteries…
This is a replacement for the Lutron Caseta Pico wallplate bracket. I was installing a bunch of remotes and, of course, came up one bracket short... so here's a replacement that has the same basic dimensions as the Lutron bracket. Unlike…
This is a 2-gang wallplate with a decora opening in the first gang and a switch opening in the second gang. Designed to match Lutron Claro covers from a distance (same corner radii, but the screws aren't hidden). The Decora opening fits a…
This is a wall plate-mounted, keystone box for 3 keystones in a vertical position. I originally wanted to use these wall plates , but unfortunately the cable box behind the wall plate isn't deep enough to handle the keystones + rj45…
I looked around and could only find novelty or special-purpose versions of the decora wall plates, and only for light switches(the outlet ones need to be slightly taller). I didn't want to have to go out to the store to get them, so used…
This model is a remix of another that holds an Oral B charger (US plug) but can be physically secured with a screw. I used a longer wallplate screw for the extra depth. Only downside of this version is that if the GFCI trips you'll likely…
I recently upgraded my network wiring with some kwmobile branded keystone faceplates I bought from Amazon, but they weren't sized for the UK standard back box. A bit of time in Fusion and problem solved! Prints perfectly fine without…
Wanted a nice heel plate for my old pedals so I designed this. Can be printed on small printers because of the 2 separated parts. Can be varied in position because of the long mounting holes
Decorative plate for wall switch. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here
Decorative plate for wall outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here
This is a simple, yet effective two part standoff for an Australian Wall Plate. Materials: Part A and B 3d printed 4 m3 bolts 4 m3 threaded inserts This takes 4 threaded inserts that allow the two halves to bolt together. This can go…
Wanted to create a slim wall mount for tablets which can be screwed into a lightswitch / junction box in place of a normal plate. Created to maximize the space on my smaller printer (FlashForge Adventurer 3) by printing on the side, at a…
A simple set of Clipsal / Deta / HPM / clone compatible wall-plates, surface boxes, surface risers and accessories All models have been designed with a 1mm nozzle in mind, for smaller nozzles just increase the wall count to near 1mm for…
Decorative plate for wall outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here
Prototype Not Tested! GIRA Centralplate 3-compartment 2x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Visible surface on print bed Legal…
Wanted to hang some of my spare 310x320 build plates on the side of my IKEA Alex so whipped up a quick solution that should fit plates in all sizes. It can fit 3 plates (assuming they are less than 2 mm thick) There are also included a…
Decorative plate for wall switches. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here
Took quad wall plate into tinkercad. Cut away all but the brim and screw hole borders (this str is included) then in prusa slicer added that to the quad wall plate, Enlarged the additions z dimension till I got the thickness I wanted. In…
This is a wall mount for the fantastic universal filament spool holder by PurchenZuPoden. I am using it together with 2.6kg big filament spools (PETG by DasFilament) and it holds strong. Gypsum wall isn't as strong as concrete/brick or…
I love home automation, however since I am renting my house there is probably a good chance that I shouldn't be messing with the electrical. Because of this I needed to find a good way to mount the Lutron Pico remotes over the top of…
Not too much to say. We moved into a house where a motion-detecting light switch had been installed in walk-in closet. Worked great for the closet, but would also trigger whenever anyone walked past outside closet. If someone went to the…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
There's plenty of holders around web, but I didn't find angled ones that would have easy access to battery level indicator button/display. So I created one. There's model for screwing invidual holder to wall and wallplate to fix four of…
Decorative plate for wall switch and outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here
I needed some unusual sizes for 2-Gang wallplates around my house, so I sketched up this design. It should fit like any traditional wallplate. Here is the source in OnShape for anyone who wants to modify the width and height to fit their…
Just a simple solid keystone wallplate for RJ45 sockets, the one I use with this → CAT6 Shielded Keystone Dimensions: Print from whatever you like, I print mine from Matt White PETG, just print face down, no supports needed for anything.
GIRA Centralplate 4-compartment 5x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: No Alignment: Visible surface on print bed Legal information: This model is…
Mount the Philips Hue V2 switch directly over an existing Decora Rocker Switch. 1 gang, 2 gang, 3 gang, and 4 gang models Cutouts keep the rocker switch accessible Center recess for 15x2mm magnets Use your own 15x2mm magnets. Compatible…
This is a wallplate mounted remote holder for the RGB Genie remote. It attaches to a standard toggle wallplate. I've included a model for you to measure to see if it would work for you. I think I can make similar holders pretty easy. If…
A narrow Orbiter based extruder for the Jubilee Printer using an E3D toolplate. Print using whatever material you like though I use PETG. All parts are oriented as they should be printed. I needed a brim around the cooling nozzle to keep…
Extruder for Jubilee Printer Using Orbiter 1.5 and Rapido hotend based on an E3D toolplate. Will need (8) short Dodge heatserts. (1) 46mm PTFE tube. (4) M3 x 8mm socket heads to mount Orbiter and wiring stanchion. (2) M3 X 8mm countersunk…
This is a mod to use the Nebula Extruder for the Sovol Sv08. I tried to stay as much as possible at the original design and parts. As this is still in development I need your support! This mod works! BUT as I'm trying to make it perfect I…
Both examples hold 5 Dillon XL650 or XL750 Shellplates and are attached to the wall using 2 #8 wood screws or drywall screws. More free AzJake projects: https://azjake.com/pages/free-projects Available printed and ready to use at…
Each prints in two half-pieces, in case the wires have already been run through the hole(s). wallTunnel.top.stl goes into the hole in the wall wallPlate.top.stl holds the M25.4 rubber grommet by its inner groove and slots into the…
This is a wallplate for a 1-gang device box (North American standard) that has two 30mm button cutouts. My specific use case was to replace a secondary wired garage door wall control that stopped working with my new Security+ 2.0 garage…
This is a keystone box for 3 keystones that can be mounted in any of the four sides. After being asked by KCx3DP to modify the original so that they could mount the keystones on the side, I realized it was easier to just make a different…
A simpler wall mount for the Cisco 9800 series of phones, at least compared to my other design. Check out that one if you need the phone to be secured to the wall. This mounts on either a phone wallplate or on two screws, spaced 100mm or…
all credits to @Elothan.( https://www.printables.com/@Elothan )
Wider Soulplates for Roces 5th Elements (39-40), with a bit more pronounced backside groove. Could be prettier, but it works…
I wanted a quick connect plug for the power connector for the my Prusa MK3. I found @tippmam plug that uses XT60H connectors. I was mounting it through a plywood wall in my 3D printer encloser so it wouldn't work as intended. I created a…
This is a trapezoid shaped wallplate for North American decorator switches/outlets. It feels fairly mid-century and is a fun addition to a house or room. The rounded edges struggle as overhangs, so I recommend printing it face-up with…
This is a Toolplate for Bambulab Printers. It can hold Inbus 1,5 - 2 - 2,5mm Printed with four 10x2 Magnets to stick hold on the backplate of the printer and hold the Tools. Pause at Layer 14 to insert the Magnets or use the Bambu Studio…
My Simetik K2 pedal mounting plate does not have any holes to adapt the latest revision of the Heunsinkveld Sprint Pedal Plate (Old revision is 104mm hole spacing while latest revision is 110mm). So I decide to make a hole template in…
Box The box is designed to be mounted in a wood wall when you have access from the back. The mounting tabs are set for a ¾” thick board, It could be easily adjusted to mount from the front. The wallplate is designed flat on the back and…
I made a nice Wallplate for the Ikea Vallhorn for less dust on the sensor Wallplate 85 x 85 x 85 mm
Kitty Wallplate Decor Bring a little charm to your wall with this sweet Kitty Wallplate Decor — a cute 3D printable hanging plaque featuring an adorable cat surrounded by flowers, leaves, and soft decorative details. Some supports are…
Triple switch wall-plate cover. Not sure of switch make which is why i included dimensions inside an out so you can measure yours. Printed on a Creality CR-10 Smart 205 Degrees 60 Hotbed. Using eSun PLA+ White Supports used overhang 70…
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
Split in meshmixer. Category: Sport & Outdoors
Simple way to mount healplate of Simforge Mark-1 pedals to a Sim-Lab P1X rig. Pic and desctription comming... https://www.facebook.com/groups/simforgeowners Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Customizable OpenSCAD extension rings (extenders/spacers) for 1, 2, and 3-gang Eaton decorator mid-size wallplates
This lets you use your existing switches as a mount for the Blindsmart/Zemismart ZMR4 scene controller. You will need to print with supports for the underside, but they come off very cleanly for me. I was going to add space for a command…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Summary This is a remix from AZJAKE who made the orginal. Original here https://www.thingiverse.com/thing:4128435 AZJAKE: https://www.thingiverse.com/AzJake/about I made this to hold every shellplate possible as of March 2020. For…
Required: 2 pairs of 3M Command Picture Hanging Strips (from Costco) 2 Pen Springs
HOMPLEX HD100 PRO Wallplate A wall plate for fixing a HOMPLEX HD100 Pro on the wall that I've created since the detector I bought was missing it in the package. It can be printed in PLA or PETG, 10% infill. Some supports are needed on the…
A wall mount for the Amazon Fire TV Cube with a finned plate for better heat dissipation. This model is suitable for all versions that are roughly the same size. I printed it in PLA, and I would recommend using supports. Enjoy!
Small upgrade for the MMU2s/MMU3 when used for printers using E3D V6 nozzles. Created to hold 0.25, 0.4, 0.6, and 0.8 nozzles as these are the standard profiles in prusaslicer for mk2.5, mk3, and mk3.5 printer families. Uploaded as both…
A 35mm standoff for ASNZ standard light and power switches. Use this to install a wallplate externally. The .3mf has negative parts for the wallplate screw holes to allow easy changing of the diameters if you wish. SVG hole cutout…
fillplate to level out the mini pushlock when using 12mm ply
This wallplate, based on another model from this site, has a cover that can easily slide to cover the outlets or cables
Wider Soulplates for Roces 5th Elements (39-40), with a bit more pronounced backside groove. Could be prettier, but it works…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
Just a simple solid keystone wallplate for RJ45 sockets, the one I use with this → CAT6 Shielded Keystone Dimensions: Print from whatever you like, I print mine from Matt White PETG, just print face down, no supports needed for anything.
fillplate to level out the mini pushlock when using 12mm ply
Quick remix of rorys3D's VESA mount to make it compatible with Multiconnect with 28mm spacing for openGrid :)
This is a keystone box for 3 keystones that can be mounted in any of the four sides. After being asked by KCx3DP to modify the original so that they could mount the keystones on the side, I realized it was easier to just make a different…
This is a wallplate for a 1-gang device box (North American standard) that has two 30mm button cutouts. My specific use case was to replace a secondary wired garage door wall control that stopped working with my new Security+ 2.0 garage…
Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…
Took quad wall plate into tinkercad. Cut away all but the brim and screw hole borders (this str is included) then in prusa slicer added that to the quad wall plate, Enlarged the additions z dimension till I got the thickness I wanted. In…
