951 models
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types. Bigger sizes up to M12 are available here:…
ISO Standard Metric nuts and bolts. The STL files are only for the nuts as they will be the same for all applications. Fusion 360 file is included to easily customize bolt lengths and threads. The thread length in the file is 5mm from the…
/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version. =============================================== 9/2/22 Added VORON Edition top and bottom.…
Base The base includes bolts , nuts and washers of M2 - M48 . Separately models are placed in specific folders. All data collected in All_in_one.dwg file (autocad). !Attention! Be careful when using for accuracy critical parts (or use…
You can support my work by downloading here as well, thank you: https://makerworld.com/en/models/205335 This collection consists of 3 types of bolt. Hex bolts Allen sockets bolts Allen countersunk bolts All bolts are in following sizes:…
Transport belts from Factorio are ready to be printed. Belts share the same scale as all other official Factorio models. Models are fully modular, enabling them to be assembled in every combination possible in the game. Belts can stand…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
These screws are inspired by ISO 8765 metric screws but they have standard pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
I previously published a collection of handles for nuts and screws i designed over time. (https://www.printables.com/model/359479-handles-for-m3-to-m6-bolts-and-screws) It was quite popular and i was asked a few times to make the models…
These models are modular in design and made to connect to each other.
A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…
All in one: Vier Varianten meiner Industrieschlüssel - immer griffbereit Vierkant: Durchmesser ca. 6mm; Kantenlänge: 8mm Dreikant: Durchmesser ca. 6mm; Kantenlänge: 8mm Schaltschrank (ohne Mittenloch): Durchmesser ca. 8mm; Seitenkanten…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
Bolt thread shrunk 1.5% Nut thread expanded 2.5% Outer hex same size as steel version Fit each other as well as normal metric bolts and nuts. Printed m4 up to M12 at 0.08 layer height. Fit each other as well as the original nut and bolt.…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
I needed a way to organise all of my metric bolts, nuts & brass inserts. So I made this case based off @whity's rugged box design & combined Zack Freedman's Gridfinity. This box has pre-made labels that can be printed if you have an MMU,…
This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…
We found a lot of cookie cutters for 3d-printing that looked very cool, but often didn't work so well in reality. This one here has now been thoroughly tested and optimized several times. After having eaten a thousand cookies, we have…
Another Bolt Sizes! Updated to fix hex socket size. More chamfer on the bolt tip, easier to clean up threads Added washer Added sets Clearer file names Feel free to send me a message if you have any special requests. Updates New double…
M3 HEX bolts collections. Threat pitch : 0.7 sizes: m3x5 m3x8 m3x10 m3x12 m3x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
I used the following settings: 0.12mm Fine @BBL X1C Profile +custom settings: Wall loops: 3 Outer wall: 100 mm/s Infill 25 % (i like the cubic infill) Auter brim (10mm) I have printed them in PLA but I think ABS would be nice to try. I…
Changes v17 Initial draft v29 Made the nut dimensionally accurate, add the washer, and moved each bolt to a separate Fusion360 component for better reuse
Summary This is a GT2 timing belt generator for Autodesk Fusion 360. Download this parametric Fusion 360 archive file to generate timing belts with arbitrary numbers of teeth, widths, and pitches. Parameters width - width of belt…
Title: Ultimate Metric Hex Hardware Set (M6, M8, M10) - Print-in-Place Summary: A complete, high-tolerance collection of standard metric hex bolts and matching nuts. Includes M6, M8, and M10 thread profiles in multiple lengths for…
M8 HEX bolts&nuts collections. Threat pitch : 1.25 sizes: m8x5 m8x8 m8x10 m8x12 m8x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
Fits a variety of belts: thin, thick, D-ring. Have not tried: double prong or knob buckles. Easy to print, no supports needed, no glue or other tools needed to assemble. Slide the hook through the base, and it'll hold with friction and…
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
M6 HEX bolts&nuts collections. Threat pitch : 1 sizes: m6x5 m6x8 m6x10 m6x12 m6x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
These M3 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
Screw sizer With this instrument it is possible to measure the diameter and length of screws, in metric pitch. It works for both countersunk screws and flat head screws. The shape of the object is flat so as to take up very little space.…
M5 HEX bolts&nuts collections. Threat pitch : 0.8 sizes: m5x5 m5x8 m5x10 m5x12 m5x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your…
Simple jig for making your own closed loop gt2 belts. This is quite simple method - probably not the best but I have tested it many times and I have belts made with this method in use for few months now without issues. Still use it at…
These bolts work okay for target practice, although not with the best accuracy. Assuming normal target blocks are used, the tips should be fairly durable and last a while. They do not require any supports but do need a 10 mm wide brim as…
Unfinished project, I don't recommend printing, just for those that are curious :)
M4 HEX bolts collections. Threat pitch : 0.7 sizes: m4x5 m4x8 m4x10 m4x12 m4x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to your printer…
This case is designed for an Orange Pi 3 LTS. Integrated into the design is a 5V 4010 fan for cooling. Printing: I designed the case with a .02 layer height in mind, and printed the parts in PETG with no supports. If your printer…
These are created just for fun. They would be the bolts needed in special situations like having drilled the hole twice, off center, too large at first ect. Each file is named with a description of how the bolt would be used. The bolts…
These M2 nuts, washers, and bolts were designed in Fusion 360. You can buy them on Amazon here: Screw Bolts and Nuts Set - M2 M3 M4 M5 M3 Square Nuts Lock nuts set - M3 M4 M5 M6 M8 M10 M12 I measured them with a digital caliper accurate…
PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful. 12 mm standoffs with M3x0.5 threads. 3-10-19 -…
This is a case for an Orange PI 3 LTS Case. It provides the required space of the heat sinks and a 30 mm fan. It also has an antenna holder. Four mounting holes are provided on the bottom of the case. I strongly suggest that if you use…
This program generates STL files for nuts and bolts. Features: ISO threads UTS threads (UNC/UNF) Hex heads Knurled heads Variable nut/bolt tolerance I've included a few example STL files. If you want to make your own nuts and bolts you…
Knurled thumb knobs for ISO M4, M6 and M8 Hex nuts or bolts. Diam = 18mm, Thickness = 10mm. Printed with PLA, 0.4 nozzle, 0.2 layers and 40% infill. Also included : 3MF containing my preferred custom G-Code and all settings. Updated :…
Small tray to keep small items like nuts and bolts attached to your SKÅDIS peg board
Overview: A 3-piece bolt-together magazine sleeve designed to fit over the 10 round polymer magazines of the Derya TM-22 for an improved, P-Mag styled look. 2 versions available - one with a cutout to add spent brass, and one without. I…
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…
This is a collection of around 400 standard metric parts, modeled for use in CAD projects. It includes common components like hex nuts, screws, inserts, and more. Hexagon nut with standard metric thread according to ISO 4032…
M3.5 HEX bolts collections. Threat pitch : 0.6 sizes: m3.5x5 m3.5x8 m3.5x10 m3.5x12 m3.5x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to…
This is a remix that is based on "Parametric Pulley for toothed belts in OpenSCAD" which in turn is a remix of many others. The previous remix added the insertion of a hexagon bolt head, while this version focuses on the insertion of a…
These are a Remix of the amazing models by TheSameNameTwice. I adjusted some of the belts so that everything would work in a true grid as well as new dovetail geometry, a new end cap for side loading, and holes to allow easy color swaps.…
In honour of Pokemon Go's Ralts Community day (August 3rd) I have knocked up a Ralts one piece and multi-material model Probably needs supports... Print instructions Category: Vehicles
Protect and or decorate a screw head of wood screws, bolts or nuts with these caps. For countersunk or flat head screws, use the ring with the lid. The lid clicks on the ring. For the M3, M4, M5, M6, M8, M10 hex bolts and nuts use the…
Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of…
Description A small imperial selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. Brim should be used if you have bed…
This is a recreation of my 'Sim Racing Cup Holder' but redesigned for M8 Bolts Cup holder designed for sim racing cockpits to hold cans and pint glasses. Drink Responsibly. Mounting to 2020 Aluminum Extrude: 2 × M8 x 15mm Socket Head…
I finally learned how to make proper knurling. I plan to make multiple sizes just because I enjoy making them. This actually make great and silent fidgets. :) After a test print, I decided to take the knurling all the way to a point.…
First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…
More Bolt Sizes! Feel free to send me a message if you have any special requests. Update Added Set Reset origin on each item Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10…
I have a bunch of Jig making nuts, bolts, knobs that use ¼-20 size, and I wanted to use them with the Matchfit system. Remixed to allow use of the bolt heads and another for flat heads/T-bolts. UPDATE 02/24/25 - Reuploaded the STLs to fix…
This is based on https://www.thingiverse.com/thing:1686322 with some changes like: - Add imperial and UNC functions for nuts and bolts - Delete all unused function, not needed for nuts and bolts - Add size as text (M:mm, i:inch, U:UNC) -…
Intended for use with Voron printers that use the awesome RockNRoll mod by RockNLol. This stops the printer from tipping over if the center of mass is a bit higher. Print settings I used the settings recommended in the original mod, so:…
This is a remix of the very awesome Woodworking Marking Gauge Tool https://www.thingiverse.com/thing:2851783 I wanted to make this without any bolts so here is my remix. I have also added an adapter for a brad nail which works better than…
Wheel bolt cover for VW and Skoda rims. Print instructions Print the cover as imported, then no additional support is required. The model has built in support for layer height 0.2mm. The support can easily be cut off, but it is not…
Mechanical Skull – A Fusion of Grit and Art This isn't your average skull model. Packed with intricate, gear-like texture, Mechanical Skull brings a rugged, industrial vibe with an artistic twist. Whether you're printing it in raw black…
This is an attractive knob that can be used with M8 Bolts or M8 Nuts. I also included the Fusion-file in case you want to make any changes. Print it upright - no supports needed Also check out my M6-Version of this knob: M6 Knob for Bolts…
Because I wanted to be about to chain the arm segments together via 2 arms > 1 arm > 2 arms > etc. I created a threadless arm to let the bolts pass through and let me chain these infinitely without ending up with some joints having two…
I like all models regarding helloween time. Thx a lot to creator SERGIOJRF. I printed all pars in 0.2 layer and 15% infill. Fence and Zero (dog) with supports, dog eyes with rafts.
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the…
These updated bolts have a larger pitch for much faster assembly of the Giant Snowman Fidget . https://youtu.be/Vmu3Gx7fCA8 What's new? Bolts have much larger pitch and will move the tensions sled more quickly The end of the bolts taper…
These screws are inspired by DIN 921 metric flat head allen screws. As I could not find standard dimensions for some of the rarely used screw variants, I decided to complete them with best guess estimations. The longer screws have partial…
Indianapolis Colts 1st layer White 2nd Blue
This module, for 1 pocket with a snap lid for Bolts and Magnets , the label can be a paper sticker, if you prefer a more permanent version, you can engrave the text on the side using you preferred slicer software. Works in conjunction…
Print each part separately diagonally & then when BOTH parts are printed remove your bed & line up your visible bed bolt holes in the magnet to show you where (in theory) the mounting screws are underneath! DO NOT PRINT THIS DIRECTLY ON…
Fit to my Mandolorian helmet and a Pyramex HPR541 Full Brim Replacement 4 Point Ratchet Suspension Link to the hard hat band https://amzn.to/3wPwxzR on Amazon "4 points full band" is the whole thing. 4 points no band" is the connection…
You can scale up model size in your slicer if needed. 2 parts, easy to assemble. If you like my work, please consider liking and subscribing, it's free and helps me a lot ! Thanks ;) 3D PRINTING SETTINGS Nozzle : 0.4 Layer height : 0,20…
Ein funktionierender Schaltschrankschlüssen in Originalgröße.
These screws are inspired by ISO 8765 metric screws and they have metric fine pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
Customized version of https://www.thingiverse.com/thing:267879 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=267879 Instructions Using the following options: length = 150 nut_trap = yes bolt_holes = two…
This is a remix of @Squirrelbrain's awesome Raspberry Pi 4 case, modified to fit an Orange Pi 3 LTS. This is pretty much my favorite case design. It looks bulky and rugged, and it seems really strong compared to some others. Plus I like…
M10 HEX bolts&nuts collections. Threat pitch : 1.5 sizes: m10x5 m10x8 m10x10 m10x12 m10x15 and by 5mm steps to 100mm All models are exported with tight tolerances. It is neccessary to adjust X/Y hole compensation for nuts according to…
Hello! This is a modular box design I made as a second iteration to my previous storage box(linked further down). This one is 100% 3d printed. No hardware required. <60 sek preview video: The diffrent boxes and inserts can be configured…
Summary: Connect together segments with M2x8mm screws and press-fit nuts 9.3 mm tall Parametric source Removed M3 hole under magnet Hardware (Note none of these are affiliate links): - M2x8mm screws + nuts (I use…
Bolt on! Another PEG board with screws and threads. Whether as a toy for the kids or as an organisational wall for the big kids ;-), Bolt on can be used for many things. Basically, it's just a board with threads and screws to screw on.…
Made with files from Printables and Thingiverse. Adjustment made to bolts and headband using TinkerCAD. Locking sleeve made in TinkerCAD.
Color sequence should be blue then white.
Easy to print case without supports
I was searching for a good way to splice belts, and there are a number of methods I found, but of them all, this seemed to be the best, and it's incredibly strong, I tried to pull it apart and I couldn't. I found an old forum post, I…
Use Case : needed a simple yet sturdy belt holder and organizer for the back of my closet door. Wanted the organizer to hold at least 8 belts and accessories. The smallest width, where the belt passes through is 6mm and the buckle width…
Bolts and Nuts in two sizes 30mm & 20mm bolts and Nuts and Can be separate and resize by the slicer program , But if resizes should be the same factor in X,Y and Z access. I print it py prusa printer with 0.4 mm and user PETG filament
Fletching jig for original Ek Archery 7.5" Adder Crossbow Bolts by Joerg Sprave (2 Vanes). Print: 1x Base 1x Arm_A (or Arm_A_0.3_Offset) 1x Arm_B (or Arm_B_0.3_Offset) 2x Lever Parts needed: 3x M3x30mm Screw FH 3x M3 Nut (recommended…
We found a lot of cookie cutters for 3d-printing that looked very cool, but often didn't work so well in reality. This one here has now been thoroughly tested and optimized several times. After having eaten a thousand cookies, we have…
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
This is a remix of fablab.ee's Makita 18V battery adapter with mounting holes for m3 bolts in a slightly different location to better suit my requirements with a 52x58 mm pattern. The holes are also countersunk further so the same length…
This is an attractive knob that can be used with M6 Bolts or M6 Nuts. I also included the Fusion-file in case you want to make any changes. Print it upright - no supports needed
This is a pair of "Neck Bolts" for a Frankenstein('s Monster) costume. Instructions Print in a silver or grey color, or paint the "bolt portion" to look realistic, if desired. I advise against painting the disc portion at all, especially…
I had this published while back with standard hex head https://www.printables.com/model/211375-m6-10mm-nuts-and-bolts-15-30mm I needed M6 socket bolt for The JAx Violin (Dragon) , then I remixed my original hex head bolts. For your…
