Counting matching models…
I saw the original model for the Lumon Keycard and really wanted to make a holder for my actual work badge. So, I made a bunch of modifications to allow an RFID badge to be able to slide in, as well as be locked into place by a lanyard…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
The Ninebot max G2 is a great kick scooter and already has good indicator lights built into the steering bar ends. The downside is that those indicators are hardly visible from behind because the driver blocks them from view. Since the…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Cable clip for Lumonite headlamps. Allows to you securely attach the cable to the straps. No more dangling cable!
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
4D Gridfinity Whiteboard Marker Holder - Stack markers vertical or horizontal with one print. This is a remix of the 4D Gridfinity Marker Holder (Large) by Cullen Webb. Cullen's holder's are for Sharpie style permanent markers. This…
Print approx. €5.17–€6.31 excl. taxPreliminary estimate for one variant
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
I wanted the cool blue Lumon Industries key card from the show Severance, however nobody had a model of it, so I created this quick design in fusion from a picture of the key card they used, scaled to the size of an RFID card to get the…
I found a lot of "Lumos/Nox" light switch covers, but none for rocker type switches. So I remixed this one to suit my needs. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Infill: 20% Notes: I set the gcode to…
Lumo is the chubbiest, chillest little red panda you’ll ever meet. Printed in just 25 minutes, this model is perfect for when you want a dose of cuteness with zero hassle. No supports needed, just hit print and enjoy the fluff vibes! ✔…
Prints with minimal supports. Front panel is press-fit. No tools needed for assembly. For best finish use textured plate.
Lumon Industries keycard from Severance on AppleTV. Print in blue for MDR, black for security clearance.
Multi-color print that uses the pause at height function of PrusaSlicer!
Updated version are one the way. Used on magnetic whiteboard, fits 6x2-3 mm magnets. Holes for the magnets are made I bit wider, so the magnets should make a snap on insert from the top and bottom, but still needs to be glued to fully…
Die Lampe besteht aus zwei Modellen. Einmal die Lampe selber und dann der Einsatz für die Beleuchtung. Ich habe die Lampe auf meinen Kobra Max mit schwarzen PLA gedruckt. Kein Raft, 20% Support.
Source: https://www.models-resource.com/pc_computer/digimonmasters/model/5239/
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
“And all in Lumon’s care shall revel in the bounty of the incentives spur.”
Full project description and build log is on my site: https://erik.build/kb/Making/Lumon+MDR+Terminal Printed in Overture PLA (White, Black, Matte Navy Blue). I printed the shell in 0.15mm layer height on it's back, with a brim and…
First off I want to say thank you to everyone who showed interest in this project. This community is awesome! I have been offered the opportunity to have my design possibly produced by MechboardUK as well as a few other Severance keyboard…
I was making a light switch cover and needed these as separate items
This mount was designed to attach a Lumos remote to an easy to reach position on the Lectric Xpedition. Customization The portion that interfaces with the remote is separate from the handlebar attachment. If you want to design your own…
Staedtler Whiteboard Pen Holder Description Keeps 4 of the common Staedtler whiteboard markers mounted conveniently at your whiteboard. Pens slide in with a nice auto, centering feature, that keeps the cap always at the front, so you can…
"United in Severance"
Trimmed down the text a little bit because it was too tall and made it difficult to use the switch. Add a color change at the text and you're good to go! Requires support on inside of cover.
Faceplate for a 3D printed version of the MDR terminal from Severance. The full enclosure requires an external modal that I cannot re-upload due to license - see my blog post for the full details .
Holder for the 6 set of Staedtler Lumoocolor Whiteboard marker. M4x10mm thread inserts are used to fix three magnets .
Sorry that I don't have a multicolor printer guys! All I did here was print this in white filament and paint it with Acrylic Paints. This is a really cool design for Harry Potter fans like me and a fun decor option. Lumos (spell from…
Version 2 - added mouse ears for better adhesion in the corners and wider outline. Easy to print. Hallows insert (and/or the white outlines) may be printed with luminescent filament for awesome effect. Printed with eSUN PLA+ No supports…
Hadlebar bracket for lumonite light.
The photo shows the original clip on the left, the reproduction, and an installed reproduction clip. Note that you should print this with a 0.25mm nozzle using high quality settings on your slicer. The model was made using SAE…
Accessory for Ikea's Skadis pegboards to hold Staedler's Lumocolor whiteboard markers, it's particularly useful if you installed your whiteboard side by side with Skadis. Customization I included 2 common versions of the holder for 4…
Praise Kier! Now you can decorate your home or office with a nice Lumon Industries Logo. It is almost as fun as a music dance experience! I hope you enjoy!
This 3D model is a custom-designed ring intended for mounting the Lumos Remote on a bicycle handlebar. The ring ensures a secure and snug fit for the remote, making it appear less bulky and more streamlined. With this holder, the Lumos…
Eine Version des Gira Lichtschalters, auf welcher die Worte Lumos und Nox zu sehen sind. Das Modell der Abdeckung ohne Schriftzug befindet sich hier: https://www.printables.com/model/754071-gira-lichtschalter
Simply print twice, glue together, serve Kier! I printed this with a 0.2mm nozzle on a Darkmoon LUX plate for the extra plastic finish.
Printed with petg using Prusa mini and 0.6 nozzle
Boost your engraving workflow with the WeCreat Lumos Golf Ball Laser Jig by Song Dawg Designs — a precision-engineered jig built to let you engrave six golf balls at one time with perfect repeatability and alignment. Designed specifically…
Introducing a practical GoPro mounting solution designed for Lumonite and similar flashlights such as Armytek. This mount offers easy customization, ensuring a snug fit for various flashlight models with a straightforward snap-fit…
Charger dock Insert the magnet charger in the slot then insert the flashligth and press hard to friction fit the charger V3.3 Change bottom holt to 8,3mm for better fit the Armytek Wizard Chargecabel (White)
I use (and charge) my headlamps a lot, so I like to keep the charger plugged in and ready, but the magnet on the Lumonite Compass charger tends to stick to magnetic things and short them out which is annoying and possibly a fire hazard. I…
Used on magnetic whiteboard, fits 6x2-3 mm magnets. Holes for the magnets are made I bit wider, so the magnets should make a snap on insert from the top and bottom, but still needs to be glued to fully secure in place. I use with Staedler…
My strap clamp broke. Lumos Customer Support offered to send me a replacement part for free, but it was $5 for shipping. I instead reverse-over-engineered the clamp. To get the strap on, it may be necessary to remove the stitching. The…
Meet Lumo , the tiny cube who brings warmth into the world of brutal perfection. He doesn’t fight chaos — he hugs it.
Blumotion fidget just to hold and click :-) Uses a blumotion for doors 970.1002. Blumotion – soft close mechanism from Blum® (furniture hardware company). Esentialy it's a gas dempfer that solf close drawer slides or any other soft clode…
So finding myself in need of a working nebulizer because of asthma-related issues, I turned to my broken nebulizer, in which the part that you connect to the house was broken off. By drilling out the center with a 7/32 drill bit, I was…
This model is a mount designed for attaching Lumos Firefly lights to the Vanmoof S3. The mount improves the visibility of the lights and enhances road illumination. There are two variants of the model: one for the front and one for the…
Print two of these. I used PETG, PLA might be a little brittle but is probably strong enough.
Lumos bicycle helmets have a handlebar attached remote for indicator and brake lights. To prevent it from theft - and to charge - it's detachable. I remixed this design to streamline it a bit more: Edges not so much protruding and…
This is a custom mount designed to attach a LUMONITE Vector headlamp to the top band of PELTOR WS Alert XPV hearing protectors. It allows you to place the lamp on top of the headset without using the original headband or helmet adapter.…
My friend Eric "postalshark" made this nifty lid for repurposing the Pringles snack pack containers. Recently, Eric talked me in to watching a show I quit watching after two slow drawn out episodes that didn't interest me, "Severance".…
This is an ESP32 experimental project that I created to learn WLED, and the use of pixel mappable LEDS with 3rd party mapping software like xlights or Resolume Arena. There is an inner and outer LED ring that consists of 43 zones of total…
Tirador cortinas persianas @Lumon Pieza pequeña que se encuentra en las persianas lumon para empujar las cortinas hacia arriba. Tambien modelo con doble pestaña, ya que mejora para subir y bajar. REcomendable hacerlo en petg, abs o asa ,…
Holds a single Staedtler Lumocolor marker. 8 5x2mm magnets need to be inserted after printing.
This modern lamp is designed for style while being easy, quick, and inexpensive to print. Using the supplied print profile, it is nearly impossible to tell that it was 3D printed, and it uses less than $0.50 of filament. There are no…
Simple Lumon key card with lanyard slot. Logo is recessed and can be painted to provide contrast around drip. Measures about 54mm x 82mm Slot is 2mm x 14mm
I bought some snips for some indoor plants I have. Decided to make a holder with a hook to put on my shelf. Trimming Scissors: https://www.amazon.ca/dp/B07ZBZBN86?ref=ppx_yo2ov_dt_b_product_details&th=1 Print at a high infill so the hook…
Model Information Meet Lumote, the squishiest bioluminescent creature, from the beautiful 3D puzzle platformer that launched on all major platforms in 2022. This model makes for a great desk buddy or could even be a great squishy toy if…
“The surest way to tame a prisoner is to let him believe he's free.”
You won't see the logo unless you have a multi-color printer. Print this remix face down & fill in the logo with an alternate color. The logo is inset .01mm so when printed it looks seamless.
Tirador para poder empujar las ventanas correderas de lumon, el que lleva es muy pequeño y cuesta mucho .
A case for my “Lumos” project: https://posts.oztamir.com/lumos-adventures-with-esp32-and-home-assistant/ I've included cover files both with and without the logo. The case is based on this:…
Achieve professional engraving results with this Minimalist Wallet Laser Engraving Jig, designed specifically for the WeCreat Lumos laser machine. ✔ Perfect Fit: Built around a 117mm x 117mm block for secure placement and repeatable…
The holder has 8 holes in the back in which 5x2mm magnets can be press-fit.
lumos and nox Harry Potter spell 2 gang plate
Hello, Sharing my project of key hanger from Harry Potter universe with Lumos spell. Key hanger has 5 hooks for keys and 2 holes for mounting on the wall. Dimensions: 164 x 81 x 15mm 🚀 Want to sell prints of my models? Subscribe to my…
A Lumon Industries Lightboxes that I created. The files include versions with and without a wall hanger and a hole for a wire passthrough. Just choose which look you prefer, a blue or whited face. I hope you enjoy!
The light guard for the Lumos Ultra E-Bike helmet is clipped onto the helmet's visor. It prevents the visor from catching the front light, ensuring that the visor does not illuminate any dirt or water droplets on its surface, which would…
Printed and built my own Severance-inspired Bluetooth Lumon Industries speaker designed by Adafruit. Wanted a fun way to make it more authentic, so I made a cable tag! Put this on anything to yourself feel like your innie. Add a filament…
While the work is indeed mysterious and important, Lumon hopes that this plaque will provide reflection for you on the equal importance of following the Lumon way. There is also a convienent stand so that you may display this in a…
Lumon badge for Vortex Model M SSK (Severance series). Import all 3 files as one model with multiple parts to the slicer. Layer height: 0,2mm Work is mysterious and important! Praise the Kier!
I printed with supports and didn't worry too much about how cleanly they removed, since it's on the back side. (yes in my make the top layer is a little sloppy. I had set extrusion rate to 1.0 from default .95 and maybe it's too much…
The mount allows the Lumoku drill to be hung from the ceiling, thus preventing it from taking up space on the workbench.
I designed this to hold the Staedtler Lumocolor whiteboard pens that we have for our whiteboard at work. The model is in two pieces and is screwed together using M6 screws and nuts (screws need to be a minimum of 30mm long). The pole that…
Delumon Digimon Creature Model
I modeled this mount to clip to the pole of a HDX 4-Tier Metal Wire Shelving Unit to mount an old Anker Lumos Lamp. ID of larger circle is 30mm height is 5mm. ID of smaller circle is 25.5mm. The shorter original version works great but…
Organizador modular de plumones Chartpak
The plastic piece between the metal bracket and the rubber strap for the bicycle mount
This model is the perfect fit for any scenario including evenings, seasonal design, and ambiance. There is zero assembly required. Enjoy!
📝 Description A positioning jig designed for the WeCreat Lumos laser engraver to securely hold heart-shaped items during engraving. I primarily designed this jig for leather hearts , making it easy to position multiple pieces consistently…
once the print is finished you may have to sand the pen and lid part down. super glue will be needed for the Anaklumos word part.
As I have the Pro version of the pen, it has dual tips, and the other tip does not comes with any caps, hence I come up with this one. I do not think 0.4mm nozzle will be cable to print the thread correctly, but as PLA is soft enough, it…
Replacement for broken or lost Lumon wall lock. Used to keep the door/windows of your encased Lumon balcony open. Print in place laying on the "left" side if looking at the button/clip. Might need to separate parts using a…
Introducing the WeCreate Lumos Groove Life Belt Buckle Laser Jig – a precision-designed tool crafted to elevate your belt-making experience. This laser jig securely anchors into the Lumos device, enabling you to achieve consistent,…
only remixed to bottom part. top is a reupload of the remixed version
Cap for mirror door closer Blum BLUMOTION 973A9000 https://www.koch.ch/de/blum-blumotion-zum-aufstecken-973a9000/p/7x.102.300. Print with PETG or ABS. Original one has metal spring.
Elevate your laser engraving workflow with this WeCreat Lumos Business Card Jig , designed to engrave three business cards at once with precision and speed. This jig is engineered to fit securely into the WeCreat Lumos void , ensuring a…
Boost your engraving workflow with the WeCreat Lumos Golf Ball Laser Jig by Song Dawg Designs — a precision-engineered jig built to let you engrave six golf balls at one time with perfect repeatability and alignment. Designed specifically…
Boost your engraving production with the WeCreat Lumos Dog Tag Laser Jig by Song Dawg Designs —precision engineered to help you engrave up to 12 dog tags at once with professional-grade accuracy. This 3D-printed jig is specifically…
Take your WeCreat Lumos laser engraving projects to the next level with this custom koozie jig , designed specifically around the Johnson Plastics Plus leatherette koozie (see stock number in photos) . This jig helps you achieve accurate,…
The speaker box from the MDR conference room in Severance (Apple TV+). If you're building out a Lumon-accurate setup, this is one of the more recognisable props from the show. Modelled from reference photos and screenshots. Split into…
Elevate your laser engraving workflow with this WeCreat Lumos Business Card Jig , designed to engrave three business cards at once with precision and speed. This jig is engineered to fit securely into the WeCreat Lumos void , ensuring a…
Boost your engraving production with the WeCreat Lumos Dog Tag Laser Jig by Song Dawg Designs —precision engineered to help you engrave up to 12 dog tags at once with professional-grade accuracy. This 3D-printed jig is specifically…
Take your WeCreat Lumos laser engraving projects to the next level with this custom koozie jig , designed specifically around the Johnson Plastics Plus leatherette koozie (see stock number in photos) . This jig helps you achieve accurate,…
The speaker box from the MDR conference room in Severance (Apple TV+). If you're building out a Lumon-accurate setup, this is one of the more recognisable props from the show. Modelled from reference photos and screenshots. Split into…
A lightbox featuring the Lumon Industries logo from Severance, perfect for fans of the hit series. A clean and recognizable design that looks great on any desk, shelf, or workspace. If you don't have or don't want to install LED's you can…
