44 models
Inspired by a model I bought but which I was not happy with, as it required a ton of supports and could only rotate, not tilt. This model can tilt up and down and rotate. The tilt automatically locks in the up position and a small plunger…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
Great monitors- but don't have VESA. Wanted to fix that with these adapters.
Highly recommend use PLA. 😉
Adapter used to attach the CR-10 Smart's 4010 fan to the Micro Swiss All Metal Hotend cooling block
Vesa mount adapter for monitor HP M27fe Infill 20% Material PETG
my mounting bracket is an exact reflection of the original connector from the monitor stand the model is made of SUNLU PETG, the print adheres very precisely to the monitor mount (I used a little force to push it into place) The monitor…
BL-Touch/CR-Touch mounting brackets for the Micro Swiss NG Extruder and NG Revo Extruder installed on an ExoSlide motion
This is a ¾ inch female to M27x2.2 female threaded coupling, designed as a print-in-place model. It allows you to connect a ¾'' male threaded fitting to a Gardena Rain Hose. After printing, pull the coupling apart to expose the internal…
This is a camera mount for the super compact camera + vtx vombo VM275T. It has a 10deg camera tilt. Right now, the initial concept is 0,66g. I have now the 0.43g lightweight version that is also snug fit. I just wanted people to test fit.…
Bracket used to align the Filament Runout Sensor with the Micro Swiss Dual Gear Bowden Extruder that is being installed on one of the 3D printers listed below. Compatible with: Ender 3 Max Ender 3 Max Neo Ender 5 Plus CR-10 V2 Use two of…
One of my case's wheels wore out and lost the rubber wheel exterior, and I wanted a clean replacement that reused the bearings. This replaces the entire wheel, not just the rubber shell. I printed this in PLA+ I intend on trying it out in…
M27 / Reducer / Pipe reducer / Adapter / Fitting reducer
Bracket used to align the Filament Runout Sensor with the Micro Swiss Dual Gear Bowden Extruder on one of the 3D printers listed below. Compatible with: CR-6 SE CR-6 Max Use one of the two screws to attach the 3D printed bracket to the…
Guide hop style retro mod for VFC HK416D & M27 generations 1 & 2. Official VFC system is patent pending, this is just a retro fit upgrade mod to bring your old HK416s back to life. No profit is being made of the mod. See manual in the…
Use at your Own risk this is your break lever I would do some panic Grabs when not moving and make sure you wont just snap it. Boo for Tektro not making replacement parts available for something so damn simple. Hopefully it's helpful for…
Threaded closure cap with M27x2 thread. I used this to close off an unused water tap that kept leaking. Used teflon tape between the threads for a better seal. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Bracket used to align the Filament Runout Sensor with the Micro Swiss Dual Gear Bowden Extruder on one of the 3D printers listed below. Compatible with: CR-10 Smart Use one of the two screws to attach the 3D printed bracket to the…
Made for the Lima6 so you can use a starter and have no round in the chamber
Bracket used to align the Filament Runout Sensor with the Micro Swiss Dual Gear Bowden Extruder on one of the 3D printers listed below. Compatible with: CR-10S Pro CR-10S Pro V2 Use two of the four screws to attach the 3D printed bracket…
Couldn't mount the monitor to my monitor arm and didn't have any spacers that I trusted so I made something better. WARNING: I'm not responsible for any poor mounting or damage.
So, I found a giant bolt sticking out of the mud a while ago and thought it was cool. Fast forward a few years later and decided to make it into a light duty hammer of sorts. The handle was printed in PETG with 3 perimeters and 15%…
PRINTED ON K1MAX. STANDARD ORCA SLICER SETTINGS 10% INFILL. NO SUPPORTS OR BRIM NEEDED.
This is a modified 4 point camera mount system made for the VM275t FPV micro camera and the cockroach frame, or any other "tiny Whoop" size quad. I wanted a 4 point mount dew to the FC always getting un-clipped, ruining the flight…
External cooling fan for Century motor found in some Jandy and Jacuzzi pool pumps. The pump is about $1800, and the fan is a $20 part. My fan was broken and the pump was excellent (after rebuild) so I had a beautiful $1800 (plus tax)…
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
I used the Print in Place Iris box here on Thingiverse , printed two of them and glued them in to a M27 Moon Explorer type body. The legs are copper tubing https://www.youtube.com/watch?v=r-cRmHOGVUY Print Settings Printer Brand: Prusa…
Angled holder for the Clippy EM272 microphone. • Open cradle — mic slides straight through (front & back), or drops in from top • Snug bore + lip overhang keep it firmly in place • Standard 3/8"-16 socket → screws onto any mic stand /…
A socket adapter to be able to use a normal 21mm Socket on a 27mm oil filter "nut". Needed this for a 2010 Ford Focus 1.6 TDCI oil filter. Has a hole going sideways through the middle of it to be able to stick in a screw driver for torque…
Enhance your speaker hanging experience with these specially crafted replacement pieces, designed to seamlessly mount the speakers of your Philips MCM275 CD player onto any wall. These thoughtfully designed replacements serve as an ideal…
Simple print. Fit is a little loose, so i can slide out the power brick when disconnecting the cable. If you want it to be truly snuck, print it at 99% size. Settings are simple: Layerheight: 0.2 or lower Infill: 25% Gyroid Orientation:…
This mount suits the CM275t all in one FPV camera and transmitter on copters with a 16mm electronics stack at 45°. The camera lens is centred on the craft so weight is shifted slightly off centre. The camera has 10 degrees of tilt which I…
Danish addon for scale model M270A1 Multiple Launch Rocket System
Storage container for up to 24 M27C512 chips or similar sized. I made the hinge tight on top to keep it from coming off. if you line it up and give it a good sqeeze it will pop into place.
For Dirt Devil M2724-6. We lost the part that broke off, so it may look a lot different. However, my design should be a lot more stable and is easy to print (and is much easier to replace if it breaks again). Printing: Use suitable…
I bought a nice 27" 5K monitor, the Alhua Dahua LM27-P501, for a good price given its specs. Unfortunately, it doesn't come with VESA mount support. So I designed a VESA 100x100 and 70x70 mount for this monitor. It's easy to print and…
Description Table of Contents Prototyping & Design Process All Prototypes & Grip Assembly Instructions Print Settings "Industrial M27 Bolt" Shifter Knob – Thrustmaster TH8S / TH8A Designed specifically for the Printables Thrustmaster…
4 klíčenky řady M27.0. Klíčenky: M27.0, M27.001, M27.002, M27.003, M27.004. 100% Tinkercad. Honza CZ
Simple print. Fit is a little loose, so i can slide out the power brick when disconnecting the cable. If you want it to be truly snuck, print it at 99% size. Settings are simple: Layerheight: 0.2 or lower Infill: 25% Gyroid Orientation:…
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
Storage container for up to 24 M27C512 chips or similar sized. I made the hinge tight on top to keep it from coming off. if you line it up and give it a good sqeeze it will pop into place.
For Dirt Devil M2724-6. We lost the part that broke off, so it may look a lot different. However, my design should be a lot more stable and is easy to print (and is much easier to replace if it breaks again). Printing: Use suitable…
Bracket used to align the Filament Runout Sensor with the Micro Swiss Dual Gear Bowden Extruder on one of the 3D printers listed below. Compatible with: CR-10 Smart Use one of the two screws to attach the 3D printed bracket to the…
![M2710 CR-10 Smart [Micro Swiss All Metal Hotend] - Fan Adapter](https://media.printables.com/media/prints/707250/images/5548422_e26a6a99-7319-4597-a85c-82e6cfe98f2b_b4c0979b-af16-4e2c-a83c-f9fd014a8de1/image1.jpg)
![M2723 ExoSlide [Micro Swiss NG Extruder] - Probe Brackets](https://media.printables.com/media/prints/707266/images/5548494_f4f0cf07-4171-4b77-b3d2-a0da6692225e_b5861331-8556-44ab-9deb-b9b54d37ec8c/image1.jpg)
![M2714 Ender-3 Max / CR10 V2 / Ender-5 [Micro Swiss Bowden Dual Gear Extruder] Filament Sensor Adapter](https://media.printables.com/media/prints/707280/images/5548532_296c7207-38f3-4797-a3ac-a62dd510d0a8_7d0079b5-5299-4a63-845f-e6ac7560c9cd/photo-jul-21-2023-7-13-14-pm.jpg)
![M2714 CR-6 SE / CR-6 Max [Micro Swiss Bowden Dual Gear Extruder] Filament Sensor Adapter](https://media.printables.com/media/prints/707834/images/5552938_2b07e331-3f8e-45a5-90ed-50ba4fa6f205_219bdfe9-2eac-433d-956f-dc740fa8f257/b.jpg)
![M2714 CR-10 Smart [Micro Swiss Bowden Dual Gear Extruder] Filament Sensor Adapter](https://media.printables.com/media/prints/707844/images/5553006_06e44b54-b979-4ed2-952d-fdea064fd975_3893a7ff-d02b-4c1a-911d-6f9e1bd41c62/d.jpg)
![M2714 CR-10S Pro V1 / V2 [Micro Swiss Bowden Dual Gear Extruder] Filament Sensor Adapter](https://media.printables.com/media/prints/707287/images/5548559_13968a29-f7fc-4143-8eed-fbe2f5a9a1d8_6856e96f-c473-4390-badf-440bb2553360/m2714_cr-10s_pro_v1v2_filament_sensor_adapter-photo-1.jpg)
