Counting matching models…
Hinge for the Audio-Technica ATH-M40x. I tried out the version from thingiverse ( https://www.thingiverse.com/thing:2823187 ), but I thought it didn't fit well so I recreated one myself. I think it works well! Made a left and right version.
I wanted something cool to store my cables and earbuds in. So i figured, why not a 40mm Grenade. Might need some scaling to fit into an actual launcher (for cosplay purposes). Designed this in Fusion360, modelled after a M406 type…
"20th Century Fox" (https://skfb.ly/6W9rH) by toiam408 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…
I needed a way to cool my Tesla M40 in a traditional ATX case. This allows a 120mm fan to be used to cool the M40. I used this fan (warning it is vary loud and will need some sort of speed control)…
While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke,…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
Air assist to get an accurate pointed airflow to the laser spot. This is for the Atomstack Laser Modul M40 (AST40W50S; 21K23) It replaces the laser shield and metal cone. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
If you build Andrew's excellent Aliens Pulse Rifle well you can't go get the queen xenomorph without some grenades to blow that egg sack off, can you? Now in the movie they are called “30mm grenades” but since the launcher in the actual…
The Advantages of a Dual-Extruder Setup with a Secondary Pulling Extruder A 3D printer’s extruder is a critical component responsible for feeding filament into the hotend, where it is melted and deposited layer by layer to create a print.…
I slightly modified the tripod leg shape. I broke a lot of them and I realized a bit stronger shape.
WARNING: Since this adapter deals with electronics/heat, use it at your own risk. I have been using this live for several months without issues with my setup. Your mileage may vary depending on your conditions/tower/cooling/etc. Brief…
Simple BIG bolt and nut. Great fidget toy and tread tolerance test.
Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…
Manufacturing procedure: Material: PETG, ABS, ASA, PC, PA11 3D Printer: FDM 3D printer, average print time 20-40 minutes, choose the version with or without brim according to the need Slicer settings: 0.15 layer height Post processing…
Dies ist eine neue Version der gleichen Idee, die schon von jay1992 gepostet wurde. Der Unterschied besteht darin, dass hier das Gewinde zum Anschrauben an die Heizung länger ist - bei meiner Heizung war das nötig, da sonst kein Grip…
High profile case for the BM40. Has similar dimensions to the Hi-Pro Planck case, only with holes compatible with the BM40. This case is split up differently than most cases: To avoid unsightly seam lines, the case is split into its main…
Thickness is 7mm, and spanner width is 50mm. Modeled with ISO profile, using tolerance 6H from ISO 639-3 (minor diameter can be up to +0.3mm). Therefore, I modeled it with a +0.15mm margin, which should be enough whether you over or under…
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
Use the same screws that keep the headphones together to add this 3D printed addon that stops that hinge from working. This prevents the headphone to become collapsable/portable but if you keep them on your desk that's not a problem. I…
Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…
M40x1.5 threaded blind stuffing to close unused M40-openings. Unused PG36-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
/!\“This model contains a historical Wehrmacht symbol.”
Update 20241101 : v2 added with an 4mm offset (so the fan hovers with a bit more clearance above the low profile PCIe devices) This is a simple top or front mount for a 92mm fan, for in use with a Silverstone RM400 and/or RM42-502 4U…
You can print this shell for the shell ejecting M40A6 Dart Sniper Rifle. My version of the shell is a little bit slimmer than the original one. Using the original meassurements always lead to the shell getting stuck when pulling back the…
M40 male adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
I will make cooling for other cards, send me the dimensions. This is a cooling system designed specifically for the NVIDIA Tesla M40 graphics card, utilizing the 6020 fan. The 6020 fan is a high-performance cooling solution that provides…
Remix of NZ Bayonet Adaptor for Moon Lamp with M40 by 2.5 pitch threads to accept an Asian sourced hanging twisted rope type of lamp socket that I found on Amazon.
Anschluß (M40) für die Absaugung der Makita DRT50. Gedruckt hab ich das in TPU. Der Adapter wird einfach nur auf die Absaugung gesteckt. Achtung, das Teil sitzt dann sehr spack!
osVAC neo M40H40-withSlipring + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist…
Adapter für Standard Heizkörperthermostate auf das alte Gewindemaß M40x1,5. Ich konnte im gesamten Internet keinen Adapter für die tollen elektronischen Thermostate finden, deshalb selbst ist der Mann. Bitte in PETG drucken da diese alten…
Update: Combination adapter Festool D27 and osVac M40 to Makita Festool D27 DM-AS/CT adapter for Makita top and edge router RT001G, DRT50, RT0700C, RT0702C, RP0900, M3601, MT361 I modeled the adapter myself and tested it until it fits…
Source Fusion 360 files included so you can remix or modify. Right side stores accessories and is elevated so lid captures items. Should be enough room to hold a pair of headphones on top of the morserino. For the morserino captures, I…
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
I modeled the Festool adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter printed in PETG
An easy to print and assemble winder tool for Makita line trimmers. After tearing a ligament in my wrist I've found it particularly painful to wind line onto my trimmer. This motivated me to build a tool to add some leverage and lighten…
This is a holder keeping your STANLEY TLM40 Pocket Laser Distance Measurer / Rangefinder nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The device sits tight in the pocket - this is intended as I do not use it all too…
a simple wall mount for the Bosch GLM40 measuring device. There are 6mm holes for screws on the back wall. Printed with PETG.
Theres two options for the magazine and the bottom. One being a normal/blank one so you could modify it to your liking as well. Assembly is pretty easy. Insert the Follower into the Mag from the bottom. Push the spring in and then close…
I included the lens hoods and a small test print for the threads, so you can fine tune the size in your slicer. With tha tests make sure to print them such as the threads ar on the top, so there won't be an issue with elephant's foot.…
Vacuum cleaner combination adapter 2-in-1 osVac M40 and Festool D27 to make yourself. Fusion 360 file to model your own adapter. Because of the grip surface you can easily remove the adapter
Move the Bafang display from handlebars to top for a cleaner look and protection in crashes. Also enables the use of handlebar mounted headlights. Designed for a 32.5 mm top tube, i've encluded the model so you can adjust to your diameter…
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will…
Clicker Cup for Mischief M40 grinder. Prevents clicker from breaking.
This is the replacement clip that goes under each side cover and hold them to cover the filters
This model is a storage case for the Zhiyun Fiveray M40 video/photography light. This model features 2 designs, one case has breather vents so the light can be stored while hot. The other case is fully enclosed and is best suited for…
Note: Depending on your printer you might need to slightly scale up or down the model to ensure a snug fit onto the barrel. The silencer is very plain because im using a cover for it anyway. Feel free to add more details and adjust it for…
If you are using a slicer with variable layer height make only first 5 mm with 0.1mm layers, the rest can be 0.2mm (printing with the thread down). Print Settings Printer: Craftbot2 Rafts: No Supports: No Resolution: 0.1mm Infill: 10%…
This is a utility part to assist in perfect zeroing your X and Y axis on an AtomStack A5 M40. You will need to do a couple of modifications to the laser chassis while installing this. Move the belt retaining T-nut on the left side up to…
Friend of mine is an EMT and saw a similar model for a different case than is used at his ambulance company so I threw this together for him Has not been tested so please send your feedback so I can tweak it if necessary Designed for 10ml…
While building my GOODMAN Zone, i found out that the DeWalt TLM30 Laser Rangefinder, which is mentioned and shown all over the project, and for which a mount is provided, is now End-Of-Life and has been replaced with the DeWalt TLM40 -…
Heizungsthermostatdapter M40x1.5 - M30x1.5 Zu beachten: Auf das Distanzstück sollte eine 2-Cent-Münze geklebt werden, damit sich nichts durchdrückt. Das Distanzstück kann auf die benötigte Länge skaliert werden. Ich empfehle den Druck in…
OMPHobby M4/M4 MAX Canopy Mounting Post OSHM4025
Stand to stabilise my e-cig during charge print in PLA variable layer-high no support on prusa mini
A chunky grip and vertical + horizontal arca-type tripod plate for the Zhiyun M40w pocket floodlight. It includes a hole for the USB port to keep charging, and plenty of room to adjust the dials without removing the grip. Pictured here in…
Hier ein Adapter von M40 auf M35 für das Osvac System, drucken am besten mit 0,2mm Layer bei 0,4er nozzle und Oben und unten jeweils 3 Schichten für bessere Stabilität
Stand for Alientek DM40 Multimeter and its Accessories: Improvements: ◦ Test probes can be inserted into the stand with or without protective caps ◦ Model has built-in ON / OFF / LOCK button Non-printing necessary accessories: ◦ 4x M3…
Tray 1 media support for HP Laserjet 400 M401. This 3D model is based on HP Inc. Original work RC3-2563 And it's meant for personal use only thank you!
Welcome to my second model. I made this out of PETG for rigidity. It hooks over the top of a flat panel monitor and supports the head unit for a Yaesu FTM-400 (and XD). This is not compatible with every flat panel monitor in existence,…
Gritfinity Bosch GLM40 - Image show first print with error text
If you have the old ASG VFC colab M40A3 you may have come across the issue like me that there are few good solutions for keeping spare mags to hand. I made the Molle adaptor a separate part for both ease of printing and so other types of…
The main paper tray from some laser printers from Samsung and HP have a pull "handle" thats very flimsy and thin, causing the handle area to be damaged. This model helps the reinforcement of that area and can even be used in trays that…
Mounting support for servo motor Waveshare DDSM400, print with layer 0.15 mm, fill 40%.
Purpose This tool is meant to widen the ends of EN conduit pipes. This allows for a press-fit connection to another pipe by simply sliding them into one another. Sizes Supported EN conduit sizes are: M16 M20 M25 M32 M40 Assembly The tool…
A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…
Modified to be printed on smaller printers in 2 parts and adjusted dimensions and usb port position. Fits a KPrepublic BM40 with usb c and looks great with translucent PETG. Category: Hobby
Hello, I have measured and then constructed the original part for a colleague. It replaces the defective original part of the SARO EM26 / EM40 ice cube machine, which had broken due to material fatigue. My colleague has installed it and…
My battery cover broke so I made model for the replacement. Printed on Prusa Mini 0.6nozzle, 0.3mm layer height, Prusament PLA
Update: I made the outer ring smoother and thinner in places where it was poking out too much. I have not tried that version yet. It should be more flush inside the pad mount. My Audio Technica ATH-M40X headphones fake leather was coming…
Milesight EM400 - Fitting for pole mount
A magnetic stand for your Alientek multimeter. Pretty sure it requires the "luxury" version of the multimeter with magnets in the back. Has 2 slots for 15mm magnets to glue in. Works pretty well for me so far. f3d file attached so you can…
This is a 3d scan from a Mikuni TM40 or HS40. I believe it came from a harley but not positive. Do something cool with it and share some pics!
This is a case mount for the NVIDIA Tesla M40 compute GPU, it's intended to be used with the fractal north case. This design is not at all perfect, the diverter does not fit flush with the card, and the screw holes are slightly too small.…
Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.Since I have a Hoymiles HM400, which is smaller, I modified Chris's great design to have a solid stand.
5 minute print to protect DC-DC converter from unwanted potentiometer rotation. Simply screws on potentiometer thread and allows regulation via screwdriver.
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Schachtel mit Deckel für fünf Filterdosen Modell M40 und M40,5 ............... Box with lid for five filter canisters, model M40 and M40.5
Objektivdeckel mit M40x0,5 mm Gewinde zum Einschrauben für z.B. das Canon 25mm f3,5 Objektiv; Den Teil mit Gewinde mit der niedrigst möglichen Layerhöhe drucken. .......................... Lens cap with M40x0.5 mm thread for screwing in,…
This is a remix of the smaller M32 adapter (excentric variant), but I wanted to use a bigger M40 bajonet connector.
My Eternico M402 Vertical Wireless mouse had a broken scroll wheel, so I disassembled the mouse, measured the original part, and recreated the wheel in Tinkercad. I then 3D printed the replacement and used it to repair the mouse. This is…
I designed a spacer for the ugreen cm400 ssd case, because the rubber ssd holder isn' capable to hold the ssd in place, in case of a drop. You can use one spacer, but i recommend too. I use PETG for printing the spacers because the ssd…
use 40mm m3 screws
This was designed to hold the 4S battery during flights using the DAMPERZEN holder and the DJI M400. It can be mounted from the back (the wide parts should hold the aluminium frame of the DamperZen from the inside). You will need to zip…
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
I made this because my original yoke broke in the hinge area. This model does not include the hinge mechanism. The model consists of 2 pieces: the main yoke and a clamp for the hinge. The model is of the Left side. Just mirror the yoke…
Friend of mine is an EMT and saw a similar model for a different case than is used at his ambulance company so I threw this together for him Has not been tested so please send your feedback so I can tweak it if necessary Designed for 10ml…
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
A magnetic stand for your Alientek multimeter. Pretty sure it requires the "luxury" version of the multimeter with magnets in the back. Has 2 slots for 15mm magnets to glue in. Works pretty well for me so far. f3d file attached so you can…
This is a 3d scan from a Mikuni TM40 or HS40. I believe it came from a harley but not positive. Do something cool with it and share some pics!
M40 and M32 male adapter for DeWalt angle grinder DWE46150 125 mm polishing attachment I printed it in PETG I modeled the DeWalt adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the…
Slide and good to go. Printed in PETG, 0.2mm 2 walls / 15% / Supports on the inside
Simple replacement rails for the 4U Rackmount Chassis Model RM4024. Rackmount Mart - 4U Rackmount Chassis - RM4024 I printed them on the edge as drawn to keep strength at the screw mounts. used 3 walls and its got enough flex to slide…
This adjustable leveling foot is designed for high-load, structural and heawy applications where precise height adjustment and stable load transfer are required. The component features a large-diameter M40×3 threaded body , reinforced…
Alientek DM40A Holder, A hole will need to drilled for the power button, And glue the partes together.
Display/Charging stand for the Smok RPM40 pod vape device. There 2 styles of the Nike check design here, each with the option of a solid model or a cutout for the microUSB charger. One design is plain stand with structural support for the…
