50 models
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
After struggling to find any kind of upgrades that can be done on this Monoprice MP10 printer (same as the MALYAN MA10), I designed and created my own V6 Hot-end adaptor. If you own one of these printers, this adaptor lets you KEEP the…
A model of the hexcore anomaly seen in many different shapes and sizes throughout the second season. Print all the files once. Paint the inside surfaces and internal pieces. This is easier to do before assembling. Glue the internal pieces…
Quite Easy to assembly. I used a 0,4 Nozzle except for Windows where I used a 0,25 Nozzle.
Replica of Viktor's fidget gear from Arcane, League of Legends. Files include normal and arcane anomaly version. Overall gear about 3" in diameter, scale up or down as needed-note scaling down may result in bearing2 being too thin to…
common anomaly y endstop block to go with https://www.printables.com/model/324787-voron-v24-and-trident-y-endstop-relocation-mod Edited: 1/19/25- add step file
Common Anomaly / Whopping Pochard's Elite Machined Ultralight X Beam with CNC XY Joints for Voron 2.4 and Trident does NOT COME with any X ENDSTOP provisions…. I fixed that.…
Update (22.11.23): Made the Jst Hole a bit more snug. Update (28.11.23): Switch now as a bit more space. was to tight Created as an option to keep physical endstops with the CA X Beam. Particularly useful when using TMC5160 stepper…
Remixed from https://www.thingiverse.com/thing:2006457 to sit on top of the printer, for minimal desktop footprint. The feed angle is probably pretty bad, but it seems to work nicely so far (I've also replaced the original axle with 608…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
I am NOT a fan of sensorless homing, I like my endstop switches. This mount bolts to the bottom right common anomaly cnc x joint and your good to go. Fits: all known voron toolhead types with endstop switch on the back. Tested:…
My, not so pretty but will do the job, version of a ring blower that, if my measurements are correct, fit the original hot end of my Malyan M320 good. If I am correct it should also fit the M200 and the Monoprice v2 as well. Also made an…
Cool your PCB stepper drivers with a 30mm fan. Includes nut traps for easy fan swaps.
This project provides a comprehensive solution for the MK4/S MMU3 in an enclosure. The setup has been thoroughly tested to ensure easy filament preparation, smooth SpoolJoin operation, and effortless removal of leftover filament. The…
Blower duct for a Volcano hotend for the MalyanM320/Monoprice select mini v2
remix of Double T's belt helper for Common Anomaly x beam
Just a quick knurled knob for bed leveling, See Pics on how to assemble. Category: 3D Printing
This is a upgrade mod to eliminate the front and back y-frame plates along with the cheap idler bracket and wimpy y-motor bracket. This mod gives you stronger y motor bracket and a better idler tension . Also changes the belt path to be…
Tray for Eclipse and Expansions. This tray holds all Ancients tiles from the base game, and the Rise of the Ancients and Shadow of the Rift expansion, along with Anomaly and Void tiles (Shadows of the Rift), spare Colony ship tiles and…
These use the stock and 40mm fan for the Malyan m200,m320,monoprice mini v2. I also put some fallout fan shrouds in with the two blowers. Other fan shroud is Fallout fan cover by xxdanmurphyxx on Thingiverse:…
This ia a drag chain riser. I needed the nubs, so I made it to fit the Malyan M150 with the correct height. This will be a work in progress, as I doubt I will get it correct the first time. So lookout for a v2, 3 or even 4... We shall…
I simply combined divide's No Drill Monoprice MP Select Mini GT2 Y Tensioner & darren_bergen's MPSM cable chain wider opening . For any issues or questions about assembly, see the links above.
Another print bed level knob. Im sure there is a close clone to this, so if it is, sorry for not making it a remix. Print it out and place a 3mm hex nut in the bottom. Happy printing. Print Settings Printer: Malyan 150 Rafts: Doesn't…
Since the Bowden connector used on these printer models are very prone to breaking, I designed this little clip that screws in to existing screws on the printer body. It will limit the range of movement of the filament feed tube, in an…
These are custom-made menu buttons for the MonoPrice Mini and MALYAN M300 Delta. These make the black buttons stand out and gives them a robust look and feel. Nobody has to guess which button is left or right anymore... You can print all…
Last week I got some new filament for my little Fabrikator 2 Mini. It was the dirtiest filament I have ever seen in six years of printing. No way I will feed my printer this material without a filter. So I designed a filament guide and…
This is an alternative method to lock your spool in place. I was getting fed up of tediously winding 2 nuts on and off the bolt everytime I changed the reel. To use, just pinch the handle, slide along bolt so it buts up against the…
I looked at some solutions for wanhao and similar i3 clones like http://www.thingiverse.com/thing:1672640 and the remixes but they all don't really fit Malyan M150 properly as M150 comes with 3 linear bearing blocks that are different in…
Printed without supports except under the 'arm' holding the fan (see in the image). I printed this with PLA, and it's just fine (it shouldn't get hot under any normal circumstances, so no need for more heat resistant plastics like PETG).…
Just a redux of the stock cooler off the malyan m150. The cooling outlet is smaller and pointed slighter a more downward angle to keep the air from blowing on the hotend Print Settings Printer: Malyan 150 Rafts: No Supports: Doesn't…
The original levers tend to brake after some time, so I made spares that are reinforced at the weakspot (as much as the space allows). Recommended to print with PETG.
Malyan M180 Extruder Mount. I have also included a extruder mount that will support 24mm Linear Bearings. How I Designed This Sketchup 2016 Category: 3D Printer Parts
I modified original only slightly so that I can fit it on M150 and ramps1.4 + RepRapDiscount Full Graphic Smart Controller (moved the SD card slot ). You will need either a sd card "extender" like http://www.thingiverse.com/thing:1335637…
My work picked up a Malyan M180 and the spool holders were not big enough around. I designed these to fit the spools I use but being the same height as the originals and designed to used the bearings from the original holders. Added a 58…
very simple part, goes around your Y tightener and keeps it straight, allows for an idler pulley to be screwed on the bottom (M4 screw and semi trapped traveling nut) so you can tighten your belt. I'm using GT2 pulleys on new Z motors…
X-Carriage (for Wanhao Duplicator I3, Malyan M150 and similar I3 clones) that can carry dual flex3drive extruder drive. source "files" (onshape) I'm using this flex3drive dual driver with 2 hexagons (one 1.75mm other 3.00mm) and am now…
Zusammenfassung: Dieses Model ist ein Remix von 81054-top-spool-holder-for-monoprice-select-mini-malyan-m200 von floe und Tronxy Crux 1 Top Spool Holder by GiuZ on Thingiverse: https://www.thingiverse.com/thing:6109350 Da mir der Wechsel…
100x160mm sign, reading “Beware Anomaly”. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
Lantern inspired in Anomaly from Arcane
This conversion is inspired by (although not based on) this model: https://www.thingiverse.com/thing:3210757 Required: 4x M3x4 (reused from the frame) 8x M3x6 (reused from the frame) 32x M3x10 (four that are used for filament guide can be…
remixed the Z endstop for wanhao to work with Malyan M150 onshape source: https://cad.onshape.com/documents/709f52ff0c2716e81a56bc12/w/2f7ac71d45eb9132ac30af89/e/0310fe934e70eeae77f49cbd the spring and the plastic cups you can see on the…
I realised, that my new Malyan M150 Printer cant handle Flex Filament like "SainSmart" very well. So i took it apart and did a complete Design of the Extruder Part. Now no flex filament wont stop my printer! =) Print Settings Rafts: No…
Malyan M150 uses MK10 hotend, but I wanted to use Bondtech CHT nozzle which is compatible only with MK8 or V6 hotends, so I bought a cheap Creality hotend and made a conversion to fit it. Required: 4x M3x20 4x M3x16 2x M3x12 1x M3x10 4x…
Hi this is my first attempt at 3D modeling, i just wanted a way to carry my bambu glue stick with my 3d printer and thought id try to make a simple little holder for it. I forgot to make holes and just drilled them in the end but if…
It is what it is. Fit for me although maybe a little tight. In any case it worked. Hopefully it will help someone else.
A key holder with the logo for Ingress Anomaly May 2026 - Orion. I've also included two separate bodies so one can use 2 colours for each (like gray for the frame and silk-gold for the medal). There is a small notch to align them before…
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
This is an insert for Warp's Edge including the Anomaly Expansion. It has been designed to hold encapsulated cardboard tokens. What you need: 25mm coin capsules. I found mine on Amazon. The design also replaces all inserts, including the…
