Counting matching models…
Hi! This project is a medium format to be used with Mamiya Press lenses. I uploaded a photo taken with this camera. A Fusion 360 file is attached for you to be able to modify it. The information related to this camera can be found in…
Thank you all for the kind messages! Can't wait to see your images, please tag them in social media #ligero69 where possible. Much love! ……… Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required…
Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required may set you back about $105-135+. With material on top of that, consider buying the real thing at: https://sprkplg.com/product-tag/llg/ If you…
Update 3/31/23: Added version for Polaroid 600SE lenses. ---------- Update 1/18/2022: Made some improvements to the lens locking method for a much more secure shooting experience. The screw is now no longer a set screw, just a lock screw…
With the increasing prices of WLVs for cameras such as my Mamiya 645 1000s, I've designed this one for me. Future plans include making it foldable and adding a lens to it!
35mm film adapter parts for Mamiya RZ67. I use the 220 film backs for this. Tested with Kodak and Ilford cartidges. You can use the included uptake spools or spool into a second film cartridge. Printed in PETG with a 0.6mm nozzle at 0.2mm…
The model is almost fully 3d printed (except for the M2 screws needed for rotating it). The print ONLY needs touching buildplate support, there is a gap between the lock mechanism and the advance mechanism that should be printed in mid…
Printed in a Bambulab P1S with AMS, added mum and mummy version for english people
The (M)edium format (R)ange(F)inder is a 3D-printable camera that uses relatively easy to source, off-the-shelf components. See the Github repo for the most up to date files, including firmware and KiCAD / Gerber files for the custom PCB.…
A simple print that fits into the space above the Mamiya RB67's ground glass without interfering with any of its viewfinders to indicate framing for 35mm film through the RB/RZ67.
Rev C Update 1/20/22: Added a beefier grip, and adjusted the mode height a bit for better printing (either 0.16 or 0.20 layer height recommended). Also updated the lens mount to what I've been using on other cameras. ---------- Light and…
Dec 20, 2020: Some materials/prints will have a loose grip. Try printing 97-99.5% size depending how loose your first print was. I use thin double stick tape, but I make it less sticky so it isn't permanent. Dec 14, 2020: Added a version…
Made using my parametric camera lens connectors . I've tested this design with the 50mm f/6.3 and 250mm f/5 lenses. The taper in the design is 45 degrees, so you should be able to print with minimal supports with the Mamiya Press side…
Mamiya Press mount vary from: https://www.printables.com/model/1019786-mamiya-press-bayonet-with-lockring ALPA Lensboard from: https://www.printables.com/model/1021541-alpa-standard-lensboard-with-focal-plane-sign screws M3x8 FLAT x4…
While working on the second revision of the MRF I got frustrated enough with the “rotating lens” Mamiya Press lens mount that everyone's using bending or breaking the post on the sensor that couples to the rangefinder mechanism on the…
This body allows you to combine an Ektar 127mm f/4.7 lens with Mamiya Press 2x3, 6x7, 6x9, or Multi-format film backs. Required: https://www.prusaprinters.org/prints/53784-copal-compur-prontor-0-to-m58-lens-board-adapter M58-M58 17-31mm…
I recently got some Mamiya 645 lenses to play around with, unfortunately without enough rear lenscaps. Being 25 € on Ebay I had to print them myself. The design is a bit like the original ones but modified for easier printing (no text,…
ALPA Back Adapter for Phase one/Mamiya M Mount Type.1
This is the cap for the 80mm Mamiya lens. I obtained a good result with PLA and 0.4mm nozzle (0.2mm layer). Enjoy!
The M42 “universal screw thread” mount for camera lenses was, and remains, very popular despite the fact that no camera bodies natively accept M42 lenses. Although there are many adapters available, there are several variations that…
Rear lens cap for Mamiya 6 lenses
a printable 645 and 66 plate for MAMIYA press manual back
Super experimental adapter that I am releasing as unrestricted and fully open for you to do whatever you want with it. Mass produce it and sell it (out of aluminum please!), and please share with the world (at a reasonable price :P).…
I printed this piece in PLA, at 0.2mm (don't remember the infill). You will need to print one frame and two round spacers. The frame is attached to your camera body by four 3.5mm counter sunk screws on each of the corners. The Mamiya back…
I printed this in TPU filament on an Ender 3. This fit on my Sekor 80mm lens. It could fit on other lenses with a diameter of 48mm.
The designers of the Mamiya 645 Pro (and related cameras in that series) did not bother to include a threaded port for a cable release. You could purchase a ridiculously expensive adapter on eBay, or you could print this thing for less…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
2019 - Momumental work of about 3.20 m height in limestone of Crazannes, by Philippe Stemmelen. Mami Wata (or Mamy Wata, Mami Watta or Mama Wata) is an aquatic deity of the African voodoo cult, whose practice is widespread in West,…
Use original version upper and lower locker. Can be printed in multiple colour. S for semi and M for manual. I use SPRKPLG 's handle for mamiya press back. enjoy it! M2*8 7pcs Countersunk M3*8 2pcs anykind screw L3*4 Wave bead screw…
Phase One/Mamiya M Mount [STEP]
Print setting: -the fonts face down. -supports only under bajonet cam overhangs. -fill the fonts with color paint if u want.
mamiya press lens for Oxygen Camera
I was blown away by the cost of an OEM Waist Level Finder for my Mamiya 645 Super. I don't use one often but when you want one you want one. So I came up with this. I will probably replace the front tabs with 1mm stainless once they break…
This is an adapter for a Mamiya Universal Press to hold a Mamiya 6x9 120 roll back. I've updated the model, the film plane should be correct now. Sorry for anyone who shot with this thing before the update! If your pictures turned out…
This is a lens hood designed to fit the 80mm lens for the Mamiya C220 and C330 family of twin-lens-reflex cameras. The dimensions are roughly worked out from online images of the original metal hood. The diameter of the clamping section…
This film scanner is designed to digitalize 120mm film shot on a Mamiya 645 middle format camera with the use of a macro lens and a digital camera. For more information about the exact digitalization process, please refer to the original…
I printed in petg and pctg 0.3
rear lens cap
XPan, but SLR :D I can't afford buying XPan and wanted to have more framing control than rangefinder cameras offer, so after a lot of experimentation I found out a way to shoot 6x17 (or more like 24x65) on my Mamiya RZ67 with 220 back.…
Finder Mask for framing 24x68 format images with the RZ67. Works with waist level or RZ67 AE prism finders. Printed in PETG and 0.15mm layer height with a 0.4mm nozzle.
Copy of the original lens hood, with a few modifications for ease of printing. The bayonet is a little finicky, but that is true for the original too. Standard 3d printing disclaimer: Minor scale adjustments may be necessary, depending on…
Copy of the original lens hood, with a few modifications for ease of printing. The bayonet is a little finicky, but that is true for the original too. Standard 3d printing disclaimer: Minor scale adjustments may be necessary, depending on…
All in all, I loved this light and portable set up. Great inspiration + starting point from @Spotmatic. It is a night and day difference compare to my Hasselblad 500cm + 60mm distagon. With a bit of practice, the 65mm Mamiya sekor is an…
This is a very crude and simple box, lid and adapter to fit a Mamiya RB67 while I was waiting for a good price on an OEM one. Nothing fancy but it worked.
Replacement back cap for a Mamiya Lens. Snug fit (tested using 127mm f/3.8 Sekor Lens) Printed in PETG for flexibility
use a 85*1.5mm for better seal, may not necessary for smooth plate, or just use 704 gule. 8pcs M3*12countersunk screw & nuts 1pcs M3*8 nylon screw for lock if the hole is lose, use M3.5(6# in ANSI) instead of M3 nylon screw. USE SUPPORT…
Credits to NiGauBech for original model :) I wanted to print in PETG for hot environments without damage. However, the keyhole shaped guide rails no longer fit from the original model. This version widens the keyhole rails and still be…
21 May 2026 Update Fixed the clearances in the back mount — Pro SD backs now attach without any issues Removed the protruding “tooth” at the bottom of the mount that prevented early RB67 Pro backs from fitting properly Added a body…
ALPA Mamiya Press/Universal Grip Convertor
I started with @BerndPfeifer_2033527 's excellent remix, however, the RB67 has an interlock that doesn't allow the back catches to be disengaged unless the dark slide is installed (which the cover obviously doesn't have). This cover just…
As I had no lid for the back opening of my RB67 I remixed DavidB75's focus adapter to a simple cover. I also added a second version that uses less material, but I have not tested that one yet.
THIS THING IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend…
Circus of the Past - Ringling Bros. - Mamie The Giraffe Wagon - 1893 3D printable model.
THIS MODEL REQUIRES THE JOLLYLOOK SQUARE DEV UNIT TO WORK This custom back allows for shooting Instax square film on the Mamiya RB67 (Pro-S tested only). The included dark slide allows the back to be changed out mid-cartridge. Note: I…
I wasn't really satisfied by how the multi part hood worked out on this original model by Madog541. So I made this "classic style one as a replacement. The original maodel calls for 1/16" wire. For all the metric folks out there: you can…
DOESN'T FIT THE Pro SD BACKS As the summary says. Printed mine upright in PETG with no supports on the insides. Snaps into place. Gratuitous chamfering because it's chamfers and also because my battery holder for my digital camera…
Parametric SCAD model of the Mamiya RZ67 camera bayonet from an original macro adapter ring. Reference high-contrast photo of the original included. Tip: check if your slicer does not make lugs too thick (too tall) because of the layer…
Back cover for m645 Super, Pro and Pro TL. Tested with: - m645 Super - m645 Pro TL Insert like the back, and press a bit from the top to make the “hinge” spring. Press too from top to remove. Doesn't 100% follow body angles but it's…
It's a Gridfinity lip balm and Dramamine bin all-in-one! Not a lot to it. The lip balm is meant for Burt's Bees, but others SHOULD fit… I think. It's 4u tall so it can still stack with the Dramamine tube in it. The STEP and F3D files are…
Use PETG to fill the print layer with 100% height 0.16mm
Topper de 15 cm para tarta, con el texto "Felicidades Mami"
Toto je na nákupní vozík pokud máte rádi svojí mamku tak ji to vytiskněte a bude šťastná. Tiskněte z PLA nebo z PET-G Podpěry nejsou potřeba Happy printing
FLCL - MAMIMI - WALL ART
Modified brushes for Tesvor vacuums, which prevent the robot from curling up light weight rugs and carpets. The original brushes on Tesvor vacuums like the M1 or X500 are using bend down brush bundles, which cause the robot to sweep under…
This is the focus knob for the Mamiya RB67 medium format film camera. It is tapered identical to the original part.
Top cover for m645 Super, Pro and Pro TL. Tested with: - m645 Super - m645 Pro TL Based and measured from the real cover with a few tweaks. I have 3D printed it with side on bottom (see pictures) and tree supports plus a brim in PLA 0.4…
This is a remix of the Mamiya 6 50mm lens hood by August DeHainaut. A quick thanks to Reddit user u/bacchus10 for providing the dimensions of the original Mamiya lens hood. The reason that the Mamiya 6 50mm lens hood was chosen as the…
Slide on offset step-up ring to 58mm thread for Mamiya TLR (C330, C220). Tested on 80mm f/2.8 and 105mm f/3.5 lenses. There is no thread designed for 58mm side, but print surface provides enough friction for a snug fit. Print is done in 2…
Tiskněte z PLA nebo jiného materiálu, při 2 perimetrech a 50% výplni. Velikost dekorace 120x120x2mm, velikost základny 135x30x3,5mm. Při montáži doporučuji použít vteřinové lepidlo. Design by Steinbauer3D
66 & 645 Mask for Mamiya Press Vario back
Body cap for the Mamiya C22. Likely will fit any Mamiya C series camera, but not tested.
Adapt Mamiya 645 lenses to a Fujifilm GFX Body ATTENTION - YET TO BE TESTED - I havent aquired a Mamiya lens myself yet to test the adapter. Feedback is appreciated! .stp files for further adjustments included
I wanted to use my Mamiya Press lenses with my Vega 4x5 and Lomograflok back , so I created this adapter that places the lens at the perfect distance from the Instax Wide film to achieve infinity focus. With the help of a shifted ground…
2by2 version (arca mount 3/8 screw) x (three cold shoes two cold shoes+shoes mount) use press lens and 120/220 back reverse from SPRKPLG 's job. Use an poly M3 screw to lock the lens. M2*8 3pcs for upper lock. M3*6 for lower lock. A…
Be kind, this is my first big FreeCAD project 🤣 This is a reloadable film cartridge for the Mamiya 16 line of subminiature cameras. 16Sept: Currently undergoing testing for light seal and usability 27Sept: Changed the take-up spool to…
So, I bought a Mamiya 645 1000s with a prism finder. I was soon flabbergasted by the fact that a waist level viewfinder costs nearly 200€: Almost as much as a M645 body without a lens. The thing with waist level viewfinders is that they…
After doing some research on taking exposures longer than 1 second with the Mamiya RB67, I was presented with two choices. The first purchasing the dual threaded cable release on Ebay for ~80$ USD (at the time of writing this) or manually…
Tiskněte z PLA nebo jiného materiálu, při 2 perimetrech a 50% výplni. Velikost dekorace 120x120x2mm, hloubka zápichu 45mm. Design by Steinbauer3D
This adapter let you use Linhof quick change backs (like the Super-Rollex rollfilm holder and ground glass focusing screen) on Mamiya Universal Press. Clamp the adapter to the back first. You may want to use an M2 screw to fasten the…
Protect That Lens This is a simple lens cap that I whipped up for the Mamiya C330 tlr. This should work with most lenses available for the C330 and C330 compatible lens assemblies. It has a friction fit so you may need to tweak it a…
I got this lens for a good price but the focus tab was missing so I design this replacement. There are two variants to chose. *Added this panorama mask for 35mm film Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No…
Lens Cap for Silver 80mm 2.8 Could be that you have to scale it to compensate the shrink of the filament
This is a simple adapter to use a universal slotted left hand grip with the Mamiya RB67 camera to limit rotating of the camera and help affix it to the grip if using a non OEM grip.
Still a W.I.P. This adapter helps you mount your Bronica SQ-A prism finder onto your Mamiya RB67. You will need to dissasemble your RB67 chimney finder to get the base + two front screws. Once you have those, and have printed this, you…
This is a custom cold shoe adapter designed to fit the left-side mount of the Mamiya RB67 , utilizing the same screw holes typically used for the camera strap lugs. The adapter allows you to attach light accessories, such as a light…
Adapter is printed in 3 pieces, and requires 6 screws. Original creator of the base models recommends tapping the holes to M1.6 and using M1.6x5 screws, but I found that using M2.5x5 screws with no tapping works (at least in ABS). I…
I’ve created a monster… Had a Mamiya Press lens not being used and whilst building an INFIDEX 176V decided that the two should become friends. This is a challenging print if you don’t have multi-material capabilities with your printer. I…
This is a storage box for the roll film insert used in the Mamiya M645 medium format camera. The film insert holds a roll of 120 size photographic film and a takeup spool. It can be pre-loaded with film and then used to quickly change…
klíčenka ve tvaru srdce na kterém je napsáno pro maminku
A viewfinder mask for the Mamiya RB67 focusing screen; helps with composition when adapting 35mm(135 format film) to the 6x7 film back of the RB67. It masks the finder for a 1:2 panoramic aspect ratio and XPan crop. Print & Fitment…
Focus knob for the Mamiya RB67 medium format film camera. It has a square profile unlike the tapered original part.
Designed a cold shoe mount for the left hand grip on my Mamiya 645 camera. I sometimes use the waist level finder and don't want to carry an additional handheld light meter, but due to lack of a cold shoe, there was no way to mount the…
-Slip in hood, threadless, fit tight. -Possible to lock in position with an extra M2x4mm screw and metal spacer on slot. -Print with fuzzy skin inside and outer walls, no support needed.
Needed a larger cap than the original and file found on the attributed model was a bit too tight. Remixed two variations for lenses. Both have great press fit. Printed in PLA on a Prusa MK3s+MMU2s Inner diameter 64,4 Inner diameter Large…
Mamiya press 50mm viewfinder to 90mm on 617 conversion
A replacement for the rail bearing on the Mamiya auto bellows for their 645 system. The original part was prone to failure and no replacements have been available for some time. This bearing works on both the front and rear standards.…
The tiny red lens mounting mark on my Mamiya RB67 got lost so I built a new one. Should also fit on the SD and SD pro, but I am not sure about that.
![Phase One/Mamiya M Mount [STEP]](https://media.printables.com/media/prints/1040328/images/7888796_341854e8-ec60-4739-91b7-a9ca2bab70ff_b7381dfb-650f-40e3-8567-ff5083caf15e/qqpin-yin-jie-tu-20241015134234.png)
