85 models
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…
This tool will help determine the size of a ring. The accompanying OpenSCAD code can be used to generate other sizes and ring models for testing. The sample gauge rings include a debossed number on the inside of the band to denote the…
UPDATES Step file of the assembly has been added 2023-08-05: NOTE , if you use cardboard spools, try and keep the spool off of the very edge of the holder (with the two very thin parts on each key); Cardboard spools tend to be hollow in…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
See “all parts” stl file for printing orientation.
I want to make some rings but if they are thin, they are difficult to hold. Moreover if you want to make a nice uniform surface the easiest thing is to mount it on a drill and use files, sandpaper to smoothen the outside. So you insert a…
measure the id of the ring, and use the size up from that. The flex in the fingers will hold it in the center. an M5 bolt goes through the center and gets held in the drill chuck.
This design uses a standard NEMA17 stepper motor as a 4th axis for a standard CNC 2418/3018. A custom deisgned mandrel serves to hold a ring in place while a standard 30 degree V-engraving bit is used to engrave soft metals such as brass.…
Salamandre tribale en silhouette, parfaite pour décorer une chambre, un salon ou même une terrasse. Le modèle fait 5 mm d’épaisseur , ce qui le rend bien rigide et simple à manipuler après impression. Petit rappel : laissez le plateau…
Shank size is 8 mm. It can easyly be changed into the file (centring-mandrel.scad). This is my first model with OpenScad.
After printing Drekenthai HieloRey's Expanding Mandrel, I realized I had a lot of filament spools that have an inner diameter of around 73mm. Those spools tended to “walk” on the Expanding Mandrel and rather than risk having them fall off…
Two piece screw together ring mandrel size 3 to 9, (2 and 10 at very ends).
2 mandrels with ring sizes 4 -13 and one ring sizer set (finger gauge set, or ring sizing gauge set). all the STL files as well asn the dusion master and some instructions in the fusion file. I made this to be able to size peoples'…
I didn't want to spend $40+ on a bending mandrel to use for 4 tubes one time, so I drew this up quickly. There are bends for 90 and 45 degrees, as I figured 180 wasn't that commong anyway. It's set for 14mm OD tubing. Smaller should work…
Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy
I designed this part to, possibly, substitute the mandrel from the model https://www.printables.com/model/248031-cnc-24183018-4th-axis-and-ring-engraving-mandrel
This is for custom watercooling tube bending with acrylic or PETG, allows you to get a 90 degree bend with a 25mm radius. This was made to fit 14mm tubing, I have not tried bending a smaller tube on this. I printed it in PETG and it…
As asked by other users I post here lighter STL files of this perfect model.
This was created so I could have my photography backdrops rolled up and I could quickly change them out. It is created to be used with 1.25" PVC conduit and an 8" long 3/8" bolt and 3/8" nut. I provide the scad files so one should be able…
This is a mandrel to hold filament spools with holes from 30mm through 60mm. You'll need a 1/4" nut and bolt (about 4" long). I designed it so the end mandrel can be removed without fully unscrewing the nut so it can still be used if you…
tried using someone elses photo mount set and it didn't work for what I needed, so I made it different and hope it works
A square and a round wire wrapping mandrel. Both go from 25mm to 5mm in diameter in 2.5mm increments. Each tier is labeled with the diameter in millimeters. The handle can be removed when not in use, or glued in, whatever you like.
Contact me/learn more: https://marbleduck.com/ Several years ago, I machined a run of billet HK receiver mandrels. I still get the occasional query for them; unfortunately, I sold my shop when I went active duty and can no longer produce…
I used the 18mm mandrel, but adapted it to a bolt I already had with a 6.5mm hole and created a cone-shaped stabilizer.
Many reed makers find their hand tires quickly from holding the a reed while working on it. These reed holders make it easier. 3 sizes are available for oboe or English horn reeds. The English horn holders will also work for d’amore or…
A set of Reloading tool holders/blocks that utilize Zach Freedman's Gridfinity system found here - https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721) The tool blocks include spaces for 21st Century…
Disclaimer: Altough I have tested it use at your own risk. Do not use a steel nut. Always wear safety goggles! This adapter lets you use you use homemade sandpaper disks on you (broken) Dremel 402 mandrels. I designed this because I…
I did not test it on my lathe but the goal, as a mechanical exercise, is to cast the raw shape in aluminium, then transform it (drill, turn, saw) to the PLA model. 2 identical units should be printed. Brim and support on build plate…
These files duplicate using PLA, PETG, or other filaments, the aluminum FAI mandrel\ form that has been traditionally used in International FAI model rocket construction and competition. WARNING - YOU CAN NOT USE this 3D printed version…
Easily printable mandrel holder. All u will need are 2x m3-10mm screws and 2x m3 bolts. Model was made for a friend, who lately has been giving lessons on ring making and traveling with tools is hard for him enough, so he really needed a…
Update 9OCT2026: I continue to update these as I discover refinements. These updated models can be found on my site at https://marbleduck.com/articles/mandrel.html Several years ago, I machined a run of billet HK receiver mandrels. I…
Mandrel for making coils out of 3/16 brake hard line. Can be “unscrewed” from the bent line after forming. Produces coils with 0.25 spacing out of 0.19 OD brake hard line. Make up to 5 coils with a OD of 2.2 in. Can use pliers to catch…
This is a re-created version of KTM/Husqvarna "Marking Mandrel" Pt.# 78129032000 intended for timing the balancer shaft when re-installing the side case on a KTM 450/500 or Husqvarna 450/501. Here's a YouTube video explaining the process:…
Un photophore avec une salamandre Voici le fichier pour imprimer un photophore avec une salamandre au style librement inspiré des motifs traditionnels de Tahiti... Mais vous pouvez faire mieux, vous pouvez apprendre à le dessiner car ce…
Mounting mandrel for centering the clutch plate Kia Ceed JD 1.6 GDi
Doctor Who - Mandrel from Nightmare in Eden Episode- 1979 3D printable model.
Printed at 20% infill, no supports required. please note you must scale to 105% for them to fit properly.
I remixed willyz99's Rivet Nut Mandrels Holder to fit 12 or 14 mandrels. I also increased the scale of the model by 105% for better fit. Bambu Studio says that there is an error in the model, but I printed without issue. I tried repairing…
This is a more advanced version of my previous design for people who really like threads. https://www.printables.com/model/865355-turned-pen-mockup-jowo-6-bg-artforums-mandrel If you're looking for a printed pen optimized for printing…
This a simple mandrel to hold rings on a drill if don't have a lathe. There is two version of the model : one ranging from 18mm to 26mm one ranging from 13mm to 20mm
This is a pair of tool holders for a drill-press power hone setup. See: Holds six 100mm x 1mm thick diamond grinding discs, and a ½" mandrel drill press adapter. The weighted mandrel holder model has a recess in the bottom for a pair of…
When using the Sinclair expander mandrel with .223 Remington the case can hit the mandrel pin or go up the side of the pin which damages the case, when used with 300AAC blackout the body of the die is to long for the mandrel to fully…
I have the HF Pittsburgh 24-1/2 in. Round Handle Tubing Roller. I needed to roll flat bar so I printed some adapters that converts the 2in tube mandrel to 1.25in flat bar. Rolls flat bar like a dream. PETG 50% infill 2 M6 25mm and nuts…
This is a arbor that is based off the honing head on a Sunnen SV-10 machine... The thread is 1/4-20
Easy way to bend 7mm OD tubing for internal guide hoses. Clamp the mandrel in a vice and use the angle markers to help bend tube to the required angle. This will give approximately a 50mm radius bend on centreline.
Holds 90° dremel attachment to multiboard wall organizer Category: 3D Printing
0.25 in base, 0.375 in points, 8 point mandrel w/ 0.25 in centering hole
Solder Mandrel This is a tool for winding wire solder to be used in a dispensing tube. The mandrel has a slight taper to make removing the wound solder from the mandrel easier. I've used a dowel in the past for this and because it's…
Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776 is the size of the oil seal 35*47*6 ). This mandrel is made in size from sources on the Internet and personal measurements. Tested…
Gridfinity Rivnut 8 x Mandrel Holder. Works with the 25mm x 25mm plastic holders. Tested with M3, M4, M5, M6, 6-32, 8-32, 10-24, ¼-20
If you're looking for a printed pen optimized for printing with a 0.4mm nozzle, use this instead. https://www.printables.com/model/747037-jowo-6-fountain-pen This model replaces my older test model which was based around the Fountain Pen…
Wanted to simplify watercooling line bending. built a mandrel guide jig to help. If you print it in resin it won't melt when you heat the acrylic lines.
Mountain bike disc brake rotor deglazing tool. I adapted the 6-bolt rotor to a Milwaukee hole saw mandrel to allow me chuck it on my drill press and make for a quick deglazing operation. This is by no means the proper or safe way to do…
When inserting new pertinax bushings into the cast housings they can be easily damaged, if you don't have access to a lathe to turn a workshop tool this is next best thing
Couldn't find a 3d model of a ring mandrel with UK sizes so I made this quick. It's only 105mm in height but has the main ring sizes G through to Z. No Half sizes. with 10% infill it took just under 11g of filament to print.
I designed this tool to replace the original key attachment of my drill that got broken with the years. Without such attachment I would loose my mandrel for sure. To be printed with TPU.
When using the Sinclair expander mandrel with .223 Remington the case can hit the mandrel pin or go up the side of the pin which damages the case. This insert is a press fit inside the Sinclair mandrel die body and aligns the case with…
Great for metal models such as metal earth that need to be bent. May need to go slow on the topmost step.
Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. In vier verschiedenen Höhen für zwei, drei, vier oder fünf Spiralen. In zwei verschiedenen Designs, eine oben geschlossen und mit Infill zu drucken,…
After breaking a shot-glass trying to hold it with a 3-jaw chuck. I made this mandrel to make it easier to hold objects of uneven diameter in my lasers rotary attachment. If you build this for laser engraving i highly recommend using a…
1x2 Gridfinity bin for holding a PSI bottle stopper chuck.
A stand to hold a ring sizing mandrel. The top of the mandrel is held level horizontally to make it easier to work on wax ring designs
This bowling ball globe knot mandrel has been used to create 2 bowling ball globe knots. This is an extremely fun project as you get to see on a massive scale your decorative knot cover a giant sphere. Instructions: 1. Print at .2 or…
Blu-Mol Mandrel and Hole Saw Holder Please share your Makes 😎
I have Marimex BlackStar6 pool filtration several years and I noticed that 6-way valve/container seal (no. 9 on the image) is crushed and I have to tighten the collar almost to the stop. I wanted to buy new seal, but I found none with…
Mandrel for re-winding Output Transformer from Leslie 122 valve(tube) amp, or any transformer with 2" x 1 ¼" x 1 5/8" core. Mounts on 3/8" shaft or 3mm screws to flat plate. This could be remixed easily to mount on other coil winding…
Mandrel Die shelf for the DDD wall control system
Version 1.0 of a mandrel and cutout template for producing paper cartridges. Measurements are taken from The artillerist's manual and British soldier's compendium.
1x3 Gridfinity holder for Taytools mandrel saver
Modularer Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. Der Stapeldorn kann mit verschieden langen Segmenten beliebig lange oder kurz zusammengestellt werden. Bestehend aus einem Bodenteil, einer…
Minor change and additional models for Crossen Cartridge's Johnson and Dow cartridge forming models.
Expanding mandrel set holder for Shars 202-5340 1/2" - 1" (#1-#5) in a Gridfinity 3x5u base.
This is for the pictured brass heat-set presses that are available on Amazon. It neatly holds (10) M4 internal threaded brass insert mandrels. After doing a short run of parts with multiple thread inserts, I got tired of misplacing,…
Print from any hard plastic.
This mandrel is convenient for repairing the lock cylinder. The result is perfect, without visible damage. Print from hard plastic
I have one in workshop and another in home and I find them very useful... Eccept those two tiny shelves... Maybe I'll change it someday
I have Marimex BlackStar6 pool filtration several years and I noticed that 6-way valve/container seal (no. 9 on the image) is crushed and I have to tighten the collar almost to the stop. I wanted to buy new seal, but I found none with…
Salamandre tribale en silhouette, parfaite pour décorer une chambre, un salon ou même une terrasse. Le modèle fait 5 mm d’épaisseur , ce qui le rend bien rigide et simple à manipuler après impression. Petit rappel : laissez le plateau…
2 mandrels with ring sizes 4 -13 and one ring sizer set (finger gauge set, or ring sizing gauge set). all the STL files as well asn the dusion master and some instructions in the fusion file. I made this to be able to size peoples'…
Print from any hard plastic.
Version 1.0 of a mandrel and cutout template for producing paper cartridges. Measurements are taken from The artillerist's manual and British soldier's compendium.
A stand to hold a ring sizing mandrel. The top of the mandrel is held level horizontally to make it easier to work on wax ring designs
