Counting matching models…
This tool has a cube at one end for grouting inside corners, and a sphere at the other end for applying caulking/sealant/silicone. Design features Two-in-one tool saves space on your hard disk. Different sizes available. Printing…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
English: This is a custom-designed Bambi cookie cutter, standing at 10 cm tall (scalable to your preference). It consists of two separate parts: one for cutting the shape of the cookie, and the other for engraving fine details on the…
Secure the mount to the frame with m3 screws and T-nuts. The threaded hole fits a PC4-M10 PTFE coupling.
I lost bag of yeti wrench holder. I design new holder for YETI 26911282 Combination wrench set (14 pcs/set; 8-24mm) Should print with PETG without support
Gore bits from in-game dismemberment were used to give them a variety of grievous wounds. Most poses come in 2 versions - regular and plain, to sculpt your own wounds etc. if you wish so.
Behold the Pyramid of Ambition, a sleek, geometric masterpiece symbolizing strength, stability, and growth. This minimalist pyramid model captures the essence of ancient architectural grandeur in a modern design. Perfect for those who…
It uses M4 bolts and length depends of what you mount it to. I've used 18mm ones. I would appreciate any ideas from you on what I can make. Still new to the 3d modeling and trying to improve, so I'm up for a challenge.
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
This is a recreated 3D model of an available bronze sculpture you can buy online. Requires quite a few supports due to the odd geometry. He's got holes in his hands so you can easily thread the “rope” into his hands. Hope you enjoy.
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
Combination of dome and the large knob for the SpaceMouse Mini v3 so you only have to print one piece and save 4 screws.
A connector to make rhombic shapes. Pictured is a 2x2 rhombic dodecahedron.
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
Low Poly Spheres: Low-poly, high-fun! Low Poly Spheres is a series of 3D printable models of polyhedra that look like low-poly spheres. You may remember from math class that polyhedra are solid 3D shapes with flat polygonal faces,…
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
A small combine I made for my Dragonwood & Pacific railroad, loosely based on the (albeit narrow gauge) combines used by the United Verde. While it's freelanced, it's probably as realistic as it gets. I read way too many primary documents…
This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable. Based on Fiction's Exhaust Cover , but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's…
Heart Trellis: These heart-shaped trellises are perfect for supporting your climbing houseplants while adding a decorative touch! I designed two versions for Valentine’s Day: one simple trellis with three hearts and a slightly taller…
TPU protection for Philips Ambilight TV remote control series 6 and 7
UPDATE: Posted v2 models which leverage 12mmx2mm and 6mmx2mm magnets due to better availability of those sizes per a request from a user. The v1 models are the original models as discussed below. This case holds the key snugly in place,…
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
Designed for my own printer, I needed a low-profile umbilical mount since the rear fan duct may overlap the rear profile during movement. the holes are M5 screw holes to be used with M5 T-nuts, i use two M5x14mm screws the hole for the…
Wearable helmet files optimized for 3D Printing. Note * STL files to be able to print your own helmet on a 3D printer. Sizing may be required for some heads. Designed to fit a default height for a typical adult head. Print Tested.…
After getting the new X-men dice throne box, I wanted to make a dice tower for each character. Added guide pins to hold pieces together while gluing.
He asked you to drink wine as his blood, eat bread as his body. Now after being buried in a tomb and left for dead he has risen 3 days later but now he craves your body, blood, and BRAINS! Being called the perfect Easter decoration here…
Combinable colourful easter eggs. The parts twist together in multiple different ways to make colourful patterned eggs. Inspired by Jakub Lattenberg's similar design There are 5 parts, each with a thick and thin variation. Sorry about the…
This is a top hat for a Voron Trident 300 that I'm calling an Ascot because of the jaunty angle ;-) . This gives extra height for an umbilical setup in the rear yet allows a complete unobstructed view into the chamber while standing in…
Handy box cutter or decorative karambit knives - available in 2 sizes - 10 gram prints
Tunnel for gauged ears 40 mm but can be resized in slicer to desired MM
This modular plant trellis is designed for anyone looking to support climbing plants on balconies, patios, or in gardens. 💡 Key Features: Clamp System in various sizes: Designed to fit various pole or pipe diameters (e.g. awning arms,…
The rhombic dodecahedron has, as intimated by the name, 12 faces, which are rhombi of which the major axis is longer than the minor axis by a factor of 1.414.. (sqrt(2)). Similarly, when 30 golden-ratio (1.618...) rhombi are assembled…
Remixed for Combined Double Battery. Removed divider for batteries. Came out a bit loose but tightens up nicely when the case is closed.
this was patched together from 2 files…i made it in mins so it sucks…. but the one i found wasnt actually for pg7 it was too small…
The rhombic triacontahedron has, as intimated by the name, 30 faces, which are rhombi of which the major axis is longer than the minor axis by a factor of 1.618.. ( the golden ratio). Similarly, when twelve sqrt(2) (1.414...) rhombi are…
I made this keychain board for my car keys, keys, etc. I made my nuts out of 2mm metal wire and some cramp connections. Over that some colored shrinking tubes and then a clear protective color. The nuts are made on an SLA printer and the…
Are you tired of only being able to open your Elegoo Centauri Carbon enclosure from one side? Say goodbye to awkward reaches and hello to comfort! If you found this useful, consider leaving a tip – it really helps! Printer Brand: Elegoo…
Accessorize your I3MK4S' frame with this clamp and text together. You add custom text by combing the models in your slicer. Print on it's back with supports, do not use “tree/natural” supports, they are harder to remove from the print.…
Background I bought the Ender3 V3 KE this year (2025) and it seems the original FatBurner toolhead cover is not fully compatible with my revision of this printer, so I ended up printing Ronald Rademaker's combined version. It fit and…
I switched to a CANbus umbilical setup and wasn't happy with my initial solution of sending the umbilical cable through the bottom deck, so I came up with this. The strain relief is meant for the USB cable going to a Beacon eddy current…
Device to prevent climbing carabiners from crossloading during unattended use, similar to the avant climbing flex link. Must be printed in TPU https://hownot2.com/products/flex-link legal disclaimer: Climbing is an inherently dangerous…
Roborock Saros 10R does not come with original plumbing kit, but there are aftermarket options online. They however, do not fit nicely in the original dock, with hanging pipes and wires. This model solves this by extending the dock…
I used no supports. I split the model into two parts and then glued them together.
I realised after having printed two magazine wells, that to reload I would have to hold the trigger…. now that doesn't work with an AR style magazine release. unless I adjust my grip or mirror the magwell. I didn't want to print another…
Made yet another upgrade version from V2, here is V3 Made Slic3r pre-set with fussy skin to add grip texture. removed a bit of material so it would print more efficent. Tested lower infill and parameters. I weight about 105 kg and Slic3r…
This foldable guage is designed to quickly be able to measure the most common distances i run into when playing Warhammer 40K with just one tool. 1" - Engagement range 2" - unit coherency 3" - pile-in / consolidate 5" - typical movement…
Keep your ½ inch drive socket set neatly organized and easily accessible with this improved holder! This V2 version features chamfered bottom edges for enhanced print quality and includes 3MF files for easy multi-color printing, allowing…
Cette réalisation est une reproduction 3D de la célèbre statue d’Ambiorix , située sur la Grand-Place de Tongres (Belgique). Qui est Ambiorix ? Ambiorix était un chef des Éburons, une tribu gauloise de la région de l’actuelle Belgique. Il…
Three variants, two with 4x2 on both sides, another with 2x2. The total width of the plates and track spans 7x2, 7x4, or 9x2. Fun to make little tunnels and archs with the blocks over the track. I generally find printing lego/duplo style…
PCB holder for Dragon Burner with Sherpa Micro You need 6 M3x5x4 heatset inserts, longer bolts for extruder and 4 M3x8 for carrier itself.
📜 Descrizione Questo componente è un ricambio compatibile per il frullatore a immersione bamix Gastro 350 . Serve per collegare la parte motore all’asta in metallo del frullatore, sostituendo completamente il pezzo originale. Il modello è…
Petit panneau attention zombies avec support pour qu'il tienne debout dans un décor Playmobil. Ce panneau n'existe évidemment pas dans le monde réel mais est rigolo dans le cadre d'Halloween. Le support s'emboite très facilement car…
A stair climbing attachment for the Workzone type 27839 foldable hand truck from Aldi / Hofer. It allows you to slide heavy goods up and down the stairs relatively easily, without “crashing” the hand truck on each step. The climbing…
If you have a problem with the building, write to me Sorry fo quality Information In the photo you can't see the lens on the lights and mirrors and also in the photo the body connection is different now it is on pins for a precise…
Frame sostitutivo per la cuffia della leva del cambio della Fiat Panda 141. Stampare in Petg o altri materiali resistenti al calore. Assolutamente sconsigliato stampare in PLA. 3D printable replacement frame for the Fiat Panda 141 gear…
Recomendable imprimir en PETG o un material mas fuerte
This is (almost) fully 3d printed mbira/kalimba musical instrument, just need some glue, screws/nuts for assembly! The sound is low but can be heard, good for practicing or playing alone without disturbing anyone and getting into trouble.…
Zombie Lion - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Stalk your players with this terrifying Zombie Lion , featuring a tattered, rotting mane and gruesome exposed muscle. Sculpted in a low, predatory crouch with ribs showing, this…
You will need 2x Standard Heatsets and 2x M3 x 12mm SHCS. The Parts should be printed in the orientation shown in the image for optimal strength Note the Standoff and Spacer are unchanged from the original design
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…
If you see a Spore Host, hold your breath or you’re already dead. These specialists have bonded with fungal parasites that have essentially replaced their lungs. They move through the fray like a living incense burner, exhaling clouds of…
Look closely at the face behind the weeping sores and you might see what used to be a proud Orc. The Symbiotes don't take prisoners for labour; they take them for "storage". This poor sod has been hollowed out and stuffed with a…
The Grub Bearer is a living testament to the K’tharr’s cold, surgical pragmatism. Every one of them has lopped off a perfectly good arm just to replace it with a "Grub-Maw Gauntlet" - a massive, muscular parasite that acts as a living…
Markers are held at a 45° angle and stick out ~12cm away from the skadis board. The hooks are slightly thinner than other 3d printed hooks to allow multiple holders to fit above each other, so I recommend at least 3 walls on the hooks to…
A simple Stencil to make watercolor swatches for Gansai Tambi watercolor boxes and palettes. This stencil fit perfectly inside the original 6 pans box of Gansai Tambi watercolor which allows you to see the swatch when the box is closed.…
Ambient light switch housing. Sensor : https://share.temu.com/Ja6Y6HETMRB
These 3D printed hangboards deliver versatile training surfaces for climbers of all levels. Each design features multiple grip configurations including deep pockets, slopers, and jug-style holds for comprehensive finger and grip strength…
Combined the two Part A BC and Part B and removed Screwhole.
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
Vesta Sentinel 15-ball loader by lucdu19, but merged together the bottom magazine parts so you don't need assembly. Slightly changed some values for a tighter fit. Big thanks to lucdu19, great model and a lot of fun to mod. I printed this…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP The Mini Zombie turns the undead into a charming,…
This is the GridQuest Ghoul / Zombie Meeple Game size: 1x1 field Because of the reason that such small miniature figures often brake we decided to use only the HEADS as a respresentative meeple for the particular species. The head can be…
Simple extrusion mounted umbilical + ptfe tube holder for the duender. Use with PUG cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland
There are a bunch of workflows you could use to create this design. This is just one of them as an exercise to learn FreeCAD. The 3 bodies are internal and are defined by a spreadsheet making it parametric. You may also be interested in…
The Concave Rhombic Dodecahedron is a novel version of the well known (convex) Rhombic Dodecahedron and inherits many of its amazing mathematical properties: Universal: One shape does it all, print as many as you want! Stable: The pieces…
GeoCaching: Gabel - Öffnung 86mm - M6-Mount - Spitze + Rund 4 Modelle: 110 - Kombi 113 - Kombi - 4x Bohrungen Ø6.2mm 115 - Kombi - 4x Bohrungen Ø6.2mm - Spitze 1x konisch 116 - Kombi - 4x Bohrungen Ø6.2mm - Spitze beide konisch => My…
There are many approaches to creating this Rhombicuboctahedron and this is just one way! You can find my FreeCAD design file here as well. I used FreeCAD sources to compile this dev version: 1.2.0dev.44934 (Git). I hope this helps others…
See https://en.wikipedia.org/wiki/Close-packing_of_equal_spheres for a discussion of regular sphere packing and the lattices that result. These components: cube and tetrahedral joints, along with equal-length struts, fit together into…
Add lovely ambiance and elegance to your LED tea lights with these stylish 3D-printed geometric flower covers. Choose from four unique designs. Perfect for valentines day, holidays, dinner parties, or cozy evenings. These toppers can be…
❤ Love Gambit & Arctic Night: The Ultimate Travel Chess Meet the "Love Gambit" — a special Valentine's Edition of the ultra-compact travel chess set designed for couples. Whether you are playing for fun or playing for a "wish" (loser…
• Highly detailed karambit replica model • Sharp curves and complex geometry • High polygon count for fine details • Aggressive curved blade design • Ergonomic handle with deep grooves • Integrated ring for secure hand grip • Suitable for…
I updated the photographs since the originals did not print well. For some reason my printer leaves a lot of threads as it moves between the small spots on each layer. Lowering the print temperature helped, but other adjustments had…
.4 nozzle. .2 layer height. Default print settings. There were a couple remixes of the top that fixed problems so I combined them and added my own fix. @zktec_3322325 fixed the entire top for better stacking but changed the top to a…
This model is compatible with the lego system.
