Counting matching models…
English While wine is made up of more than 400 aromas, coffee is made up of more than 800, making it one of the most complex natural products and giving it a wide range of flavors depending on the coffee bean and the method of roasting…
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the…
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! My first PETG prints in 100 and 100.5% scaling were unfortunately not a success. They were too tight and did not fit. Update 04/23/23: Then I scaled…
English The 3D4U Valuables Separator. A versatile helper when it comes to separating large and small items. Whether you are vacuuming your kitchen drawers or a rucksack, looking for a lost earring in the carpet or vacuuming a pile of…
Ich habe bei diesem Trichter für die Nachfüllung von Twindos Kartuschen den Einfüllstuzen (Rohr) um 10mm verlängert. Grund dafür war, beim Original (vielen vielen Dank an Phill Ament für dieses ausgezeichnete Design) drückte es mir beim…
Print the funnel upside down (like a pyramid) with no supports. You will need to rotate the disk back and fourth as you fill. You can brace the funnel against the PowerDisk by pushing on the part of the print that extends next to the tip…
Kudos to Robert Schiele for the brilliant idea to design a lid for the Miele PowerDisk ! Also to Alvomane for his variation . My changes make the lip a little deeper and thicken the lid a bit. I felt a more satisfying close this way.
English Tight spaces at home that no accessory can access? Many are familiar with this. Now you can with the 3D4U Flexi Nozzle. As the tip of the nozzle is printed with an elastic material, it protects your surfaces. Three different…
English The Miele 3D4U Motif Dispenser. Magically create your name or favorite motif on a surface in no time at all. With cocoa on your milk foam or with icing sugar on your pastry. Similar to a pepper mill, the upper and lower sections…
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
Vacuum cleaner nozzle for Miele. I built this as an additional nozzle because the original is too short and too thick for cleaning the car between the seats. Category: Replacement Parts
This adapter connects any Festool machine with a Cleantec connector to any Miele vacuum using a tube with a mechanism as the one in the picture! Also check out the remix from user 'crossi86' here: https://www.thingiverse.com/thing:4936333…
While I like the convenience of Twindos, I don't like that the cartridges are not fully emptied or even rinsed. (The machine is level, so I suspect a design flaw.) I also don't like the empty cartridges Miele sells for use with 3rd party…
Wall hanger for the mouthpiece (with tube) of a Miele vacuum cleaner. I got tired of having the mouthpiece of the vacuum cleaner standing loose inside the cupboard. This hanger makes it easy to hang it onto the door. Update 2021-10-06:…
More photos, including close ups and different filaments: https://www.instagram.com/p/ChSSCyCNl7l/ and https://www.instagram.com/p/ChXQl55Nwem/ and https://www.instagram.com/p/ChcnSgstmgX/ --- More Beer Mugs…
English Would you like to create your own decor motif? Please download the template offered here and insert your motif or lettering with a CAD program. The less details the motif contains, the easier it is to recognize later as a…
Our vacuum cleaner handle broke. So I made a replacement part. Type Miele S8340, though it might work for other Miele machines as well. We are using it now for almost 6 months without problems. Did add the FreeCAD file if you want to…
English With the 3D4U micro handle you become even more flexible, for example when vacuuming inside a car. The micro handle is a very small version of a handle. On one side you can attach an accessory, e.g. the 3D4U Flexi nozzle. On the…
This adapter can be used to connect a Dyson vacuum cleaner to a pipe of a Miele vacuum cleaner. The button to release needs to be assembled to the adaptor. I used a spring of a ballpen and a paper clip. Compatible with Dyson…
this is a shorter Version - fits a PRUSA and prints faster
This is a Plug for the Miele Power Disk Once the Miele Power Disk was placed in the mashine, the Dishwasher Powder can through the opening. There is no easy way to close ist again. With this Plug, you can close it (for example: to refill…
More photos: https://www.instagram.com/p/CvFZJU3t890/ https://www.instagram.com/p/CvHzweLt9WT/ With stainless steel inserts: https://www.instagram.com/p/CvM5YA8NORH/ Printing timelapse: https://www.instagram.com/p/CvHCn-POASK/ Render +…
English With the 3D4U micro handle you become even more flexible, for example when vacuuming inside a car. The micro handle is a very small version of a handle. On one side you can attach an accessory, e.g. the 3D4U Flexi nozzle. On the…
Hopper to refill Miele TwinDos cartridge. Print upside down, Infill 100% or 3 wall lines. Category: Bathroom
This C clip keeps the rollers of the top shelf rail of my Miele dish washer attached to their metal shafts. Print in filament with high point of heat deflection (e.g. Polycarbonate, ASA or ABS). I printed at 0.15 mm layer height with 100%…
I suggest to print with PLA or Nylon. 0.4 line width 3 perimeters 30% triangle infill Calibrate center hole to Ø4mm Lubricate axle and gear before assembly Simple replace gear in the drive module. Ensure that gear freely rotate on the…
These are specially designed for 3d printing reinforced replacements for the old and new versions of the BOSCH/SIEMENS/MIELE refrigerator door hinge bushing (00169301, 5384490). The bushings have built-in supports which have to be broken…
Distance holder for Miele's dryer or washing machine to keep the door open for a long time without the door being open or approaching further and the machine being able to dry out. Print instructions Sliced for a Prusa mini. Print without…
My Miele vacuum is over 20 years old and still works great. The plastic parts on it have long since been broken, but now that I have a 3d printer I found some time to fix it up. This is an adapter that I am gluing to the side of the…
Ich ärgere mich immer darüber, wenn ich das Flusensieb bei meiner Waschmaschine säubern müsste, keine richtigen Auffangbehälter zur Hand zur haben. Entweder sind sie zu hoch, oder zu klein oder Rund. Oft habe ich dabei eine mittlere…
Air intake regulator cap for the Miele Artico (HS05). This is a replacement of the original cap which was getting loose and always falling apart. I started printing with transparent PETG but result was so good that I did not change to…
I use it made of PLA, but may be TPU is better for reducing noises. Original spare part numbers: EAN: 4002516579250 Materialnumber: 10835083
A Paw motif for the 3D4U by Miele Motif Dispenser
Based on layershifter's adapter , remixed in Tinkercad. If you want to customize it, head over to Tinkercad :)
When moving, 2 legs (part number 6033081) broke on the Miele dishwasher, so this model was created. The front ones fit perfectly. Haven't tried the back ones.
Easy replacement of a clip for Miele Dishwashers. Recommend to print out of a heat resistant material like ABS not PLA The model is slightly larger compared to the original ones, this ensures a good strong fit. Mine still holds up…
Hilft, wenn viele kleine Teile beim Staubsaugen Gefahr laufen, aus Versehen eingesaugt zu werden. Helps, if many small parts could be swallowed by a vacuum cleaner. Suche in OnShape nach / Search OnShape for: "Staubsauger"
Funnel for Refilling Miele Twindos Bottles Save money and reduce waste with this custom-designed funnel, specifically made for refilling Miele Twindos detergent bottles. Miele’s Ultraphase detergent bottles can be expensive, but with this…
I purchased a hand vacuum pump (https://www.amazon.co.uk/gp/product/B0C4YB5KMS) to extract the air out of vacuum filament bags. But boy is it hard work. So I modified GerryPB's “Vacuum Storage bag hose adapter” to fit my Shark vacuum…
So after many years with a broken door handle and looking around the web and realizing how much an original part (EAN: 4002515193884 / Material number: 06239404 ) would cost I decided to put my new printer to use and design my own fridge…
Da meiner letztens abgebrochen ist, habe ich hier ein Ersatzteil designed.
Adapter for Triton TRA001 to a 43mm suction hose. (Miele) (Left handed thread!)
YAGNI (You ain't gonna need it) But if you are really the one person on the world who also needs a replacement for the turntable of a 30 year old Miele M8160-2 microwave oven , send send me some kudos, please. Took the model from Zendama…
Replacement hose connection for Miele vacuum cleaner. -you will need a M4x30 Screw. -for D=42mm hose
Replacement for clip holding buttons to control panel opening. The originals seem rather fragile - I've had to replace them a couple of times. This is a drop-in replacement which is fairly straightforward to replace. Symmetric for use at…
To mount the cool 3D4U by Miele Borehole Cleaning Aid to an Electrolux vacuum cleaner with a special non-round-shape tube, you need a 34mm tube adapter. There are some designs available, but not one fitted good enough for me. So I created…
Miele Motif Dispenser various motifs
Since I had Miele accessory nozzles with a 35mm diameter but now own a Rowenta vacuum cleaner with a 32mm diameter, I was in need of an adapter. Unable to find a suitable design, I decided to create one design myself. Included for…
English The Miele 3D4U Mono Bracket is the perfect addition to your Compact C2 vacuum cleaner. With the mono holder, you can attach another accessory to your vacuum cleaner within easy reach. The Mono Bracket is pushed onto the retaining…
Series of brackets for holding the hose and the extra head from your miele cannister vacuum in your closet
My miele dishwasher top rack wheel stop clip broke and this is an easy to print model that fixes it. I printed some in PLA but in like 2 months they always break (probably due to heat cycles), so i printed it in PETG and it is perfect.…
Replacement part for connecting the brush to the metal pipe of a “Complete C3 Cat & Dog Hardfloor PowerLine - SGEF3”…
Miele vacuum adapter for tight places with sideways suction, versions with snap point on the front and left side
Dieses Teil ist ein Ersatzteil für den Miele ecocline S5 Staubsauger. Es handelt sich um einen Schieber am Griff, um Luft einzulassen, wenn der Saugkopf an einem Tuch oder einer Gardine hängen bleibt. Auf Deutsch heißt er Nebenluftregler…
Just a little adapter for a normal Miele Vaccum with 34cm inner diameter. Category: DIY
Hilft, wenn viele kleine Teile beim Staubsaugen Gefahr laufen, aus Versehen eingesaugt zu werden. Version mit konzentrischem Filter, erhöhter Luftdurchlass. Als Düse oder Zwischenstück verwendbar. Helps, if many small parts could be…
After modifying and printing https://www.printables.com/model/251018-ryobi-random-orbit-sander-r18ros-expanded-dust-por I figured out that I don't have the R18ROS but the RROS18 from Ryobi. Even it looks like a small difference… it's a…
Since i like this Borehole Adaptor from Miele - https://www.thingiverse.com/make:856793 a lot but using a Dyson, i had do design my own little adaptor :-) hope you like it. Will obviously also fit for parts of other vacuum/hover Print…
Just a simple holder for vacuum cleaner tools Category: Household Supplies
Bei unserem Miele Staubsauger ist die Haltenase für die Toolhalterung am Schlauch abgebrochen. Habe die Toolhalterung nachgezeichnet so dass diese direkt auf das Verbindungsstück gesteckt werden kann. Wenn die Maße stimmen, passt dies…
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
Adapter to connect the standard Bosch suction socket for the GST 160 (B)CE (OD 28 mm, part-no. 2605730066) to Miele household vacuums (OD 35 mm). Likely also fits jigsaws of the same series, like the GST 140 (B)CE and 150 (B)CE. The fit…
The toe kick brackets that came with my Miele dishwasher were cast aluminum and broke after a couple run ins with shoes. I modeled these, printed them in PETG, and installed them without any issues. Much better than paying $20 per bracket…
Miele Cm6350 Gear Driver Miele Cm6350 Gear Switch Should be compatible with Melitta 6556235 / Delonghi The gears was broken cause O-ring are old, each 2 years must be replace to avoid to break this parts. You can use Melitta 200930 kit to…
englisch This is a model for a replacement crevice tool for the Miele Complete C2 vacuum cleaner. After losing my original nozzle, I designed this model as a replacement to the official Miele crevice tool . The new nozzle allows for…
This adapter connects the vacuum hose to the wand handle. This is remix eliminates the need for an M4 screw by adding threads inside the part so you can screw it directly on the hose. The threads are a tight friction fit so no glue is…
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
Just a simple holder for hanging the brush attachments on a wall. Has a slot similar in dimension to the one found on the vacuum's body, so the tool can just be slid into place. Print upright, no supports needed. Use drill to expand…
This is a Plug for the Miele Power Disk with 15mm hole. Unplug to infill the Powder. With this plug you can cover the hole until next refilling. see also https://www.printables.com/model/1272285-plug-for-miele-autodos-powerdisk If you…
bought a second hand Miele c1 complete vacuum that didn't come with a false air clip on the vacuum hose. So it would suck in false air constantly. I modelled and printed a new one. I found others on here that were not suitable for this…
Because of tight tolerances the filament need to be dry befor printing. It has been successfully printed with ABS, 0.4 nozzle and 250C on K2 Plus. It will probably work just fine with PLA or other filaments as well. 5 wall layers, bottom…
When my hose connection broke for the third time I design an adapter of my own. It's intended for Miele S5xxx series vacuum cleaner. You might need to file a little on the top of the locking latch it's a very tight fit to make it as…
Adapter for the SKIL 100W multi sander, 280W orbital sander and 300 W Random Orbital Sander to a Miele vacuum hose. The tools use the X-Flow dust collection system but also come with a generic vacuum adapter. But that means using the 40…
This funnel I created so that I can transfer the liquid for an almost empty TwinDos cannister to a new one, so that I don't waste the leftover detergent. Just hold the empty cannister on top and push it down on a new one, the internal lid…
The Miele W1 and T1 (washer, dryer) both have drain lines - the washer, a 7/8-inch and the dryer around 1/2-inch. This adapts the two to fit into a 1 ½-in pipe. I suggest you use a material that will hold up to both hot water and caustic…
Das Rad auf den Halter stecken und das Kombi Teil beim untersten Rack auf den vorgesehenen Draht auffädeln. Mit den Klammern am querliegenden Draht fixieren. Beim Drucken sollte ein Material gewählt werden, dass den Temperaturen in der…
This part replaces the original slide valve wich is prone to breaking. Instead of buying the whole thing, you can get going with this. Please mind the instructions at the print settings section! Print Settings Printer Brand: Creality…
English Discover the practical addition to your Triflex wall mount — the Triflex battery holder. The battery holder can be attached to the back of your existing wall mount without tools. The clever design of the holder ensures that the…
Adapter to use Miele accessories (nozzles, brushes) with Bosch GAS 18V-1 cordless vacuum cleaner. Print instructions Resolution: 0.2mm Infill: 15%
Zyklon: Hersteller: Staubsauger: Hersteller: Miele Modell: Tango plus / S381
So this is a potentially over-engineered solution to a problem not many people have but here goes… If you have a modern Miele washing machine that uses the DOS washing liquid bottle system, then you are probably as frustrated as we are…
Adapter to connect the standard Festool suction socket for the PS 300 EQ (OD 28 mm, part-no. 10027974) to Miele household vacuums (OD 35 mm). The fit is intentionally pretty tight and you might need to sand/file down the Z seam on the…
I use the accessoires and brush of a Miele vacuum with my Kärcher WD3 Premium, to me it kinda is the best of both worlds. I only needed a way to store the accessoires without them laying around all over the place, so I designed this…
This is a replacement cap for a Miele dishwasher toe-kick front plate. The original Miele part number is 6389680. According to the manufacturer's specification, it should be compatible with the G6xxx, G1xxx, and G2xxx dishwasher models. I…
DE: Dieser 3D-gedruckte Salztrichter wurde speziell für die Miele Geschirrspülmaschine G666 entworfen. Falls dein originaler Trichter verloren gegangen ist, kannst du mit diesem Modell schnell und einfach Ersatz schaffen. Der Trichter…
Lost this part of my Miele washing machine, so here it is...
I switched from a Dyson vacuum to a Miele and wanted to reuse the Dyson Home Kit attachments with the Miele vacuum. It's just a simple cylinder that fits the Miele Hose and the Dyson attachments and has minor tapering in the tube to hold…
I made this so I can use the printable Miele tools on my Electrolux Pure D9 which has a non-standard shape. Adapter fits over the Electrolux hose and under the Miele tools. Miele tools: https://www.thingiverse.com/miele_3d4u/designs
Brush holder for Miele HX vacuum cleaner
English The 3D4U Bubble Attachment. Why not use the vacuum cleaner in a playful way? With this accessory you can effortlessly create shimmering bubbles. The shape of this accessory is based on a group of soap bubbles. The module is…
This adapter lets you clean the filter of your Roborock S10 simply by attaching it to your household vacuum. Two versions included : Dyson connector 35 mm standard connector (fits Miele, Siemens, etc.) Designed for a secure fit and easy…
Allow you to use cheap 3/4" PVC to extend the vacuum reach or add sweeping elbows to get at hard to reach locations. Print instructions Category: Household
This is a adapter for a Mile vacuum cleaner, so that you can suck the air out of your filament bag I have printed this adapter with my Anycubic Kobra 2 Neo My Settings are: 30% Infill Layer Height: 0.3mm Wall Thickness:1.6mm Top/Botton…
Because the accessories for the Vorwerk Kobold VT-300 vacuum cleaner are very expensive and we have a lot of accessories for our Miele vacuum cleaners, it was obvious to create an adapter. This allows us to use the Vorwerk Kobold with its…
Replacement for the original waste container of Miele coffee machines. Original article number 09458490. I always had the problem that the coffee waste didn't fall all the way to the bottom because of the bar in the original container.…
My Miele vacuum cleaner mouthpiece needed replacing and I found one online that did the work just fine. The only problem was that the new part did not have a small clipping piece the original part had, which allowed the head to be…
TwinDos Funnel for Miele Washing Machines Update 2025-11-11 I added a modified version: Actuator2 and funnel2. This design works better. We use a Miele washing machine and dryer, and really appreciate the convenience of the TwinDos…
