159 models
I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…
Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…
Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…
Keep the environment dry by using this silica gel box. I remixed my previous "Click - Box" design, see: https://www.thingiverse.com/thing:2326019 UPDATE 1: like mentioned in the comments the previous version had some problems with slicing…
NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…
Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…
Case for sensor. It is enough waterproof for “standard” humidity. It is not fully waterproof when water sprays directly to case for long time. In this case is necessary to seal by glue. You need also two wood screws 2.5 x 10mm. I printed…
While the S2 is a good idea in principle, it has some drawbacks - the two filament exits in the shell are quite steeply angled, which does not work well when printing from it sitting at the same level as the printer itself. Additionally,…
Tatooine Moisture Vaporator
:edit 23.04.2024 added version for mounting on a wooden board. Use 3mm wood screws.
Anti-moisture silica gel container Fast Print possible due to straight pattern. In two versions. Important, before the first assembly, a little grease the thread. The silica gel should be larger than 2.0 mm because the holes are 2.0 mm.…
This is a cover for a capacitive soil moisture sensor. With the use of silicon to assemble this(as shown in the video) the sensor is will be waterproof for long-term outdoor use. Check out the assembly video on YouTube…
This is my first Remix of a file using Tinkercad. I hope it helps other that have Hygrometers purchased from Amazon that wouldn't fit in the original file.
Anti Moisture Silica Gel Box (container) Easy to print and easy to close. In three versions. Important, Grease a little before assembling for the first time. The silica gel should be larger than 2.5 mm, as the holes are 2.5 mm. Diameter…
This is a 2 piece printed housing to replace the original housing supplied with the sensor. The intent was to have something that was easier to put the sensor on, had more airflow, more protection, a little more appropriate sun shading…
This cover is studied to be closed without screws, it's designed with no holes on top of the cover so that the rain could not flow inside, enough space to do a connection with another wire, no space to let enter bugs.
I liked the original minimalist design of the wedge, but ran into some issues with it not staying secured to the Bowden tube and the dryer itself, so I added 2 set screws for holding onto these parts. I also added a M6 tap for a Bowden…
Here is the outdoor/indoor moisture sensor cover for product : https://www.ebay.com/itm/2-x-Soil-Moisture-Hygrometer-Detection-Humidity-Sensor-Module-for-Arduino/392072187636?hash=item5b4952cef4:g:9A0AAOSwGdhbMdno The sensor comes very…
This is a 2 piece housing for the MakerFabs Soil Moisture Sensor LoRaWAN. The housing print file they offer is square and has minimal airflow. This has excellent airflow and good protection from rain and lateral water. I strongly suggest…
Anti Moisture Silica Gel Box hexagonal (container) Easy to print and easy to close. In three versions. Important, Grease a little before assembling for the first time. The silica gel should be larger than 2.5 mm as the holes are 2.5 mm.…
Simple modification du modèle de Stanley (lui-même remix de l'excellent modèle de hexvolt ) afin de faciliter l'impression, sans support. Imprimé en PETG transparent pour visualiser la couleur des billes de silice. Print instructions: 4…
This 3D-printable soil moisture sensor case is designed for indoor use, featuring a cylindrical body and a cover. The components join with an M2 8mm screw for stability. To ensure water resistance, it is recommended to apply silicon…
Here is the moisture sensor cover. Can be used indoor/outdoor. No glue required, it is very tied, but you probably need to wrap a small piece of tape around wires where wires enter the box.
Soil moisture sensor case for the sensor in the images. The case will require to m2/m2.5 screws to fix the board. The top case will fit snug, you will need to gently press it in 2-3 times. You can find the Tinkercad model here Print…
Thanks to @gristleking_151808 for providing the Step files for his Enclosure for the “MakerFabs V3 LoRa sensor” i was able to quickly adapt it to the b-parasite sensor which is similar in design and function, mostly reduced the height and…
A small project box to house a Wemos D1 Mini and Soil Moisture sensor. I've added an extra hole for the cable of a DS18B20 temperature probe too. Power is supplied via some CAT5 cable. The ESP8266 module is the Wemos D1 Mini V3 PCB, not…
Suitable for 4L dry box, with Hydrometer and Pneumatic holder. Moisture-proof bead storage container included.
Added a slot for the original or a second moisture meter.
Filament Dry Box I wanted a proper IP65 filament dry box with some good capacity for my 3D printer. There are plenty of DIY and commercial options on the market, but I figured that I would toss my hat in the ring as well. Here it is (the…
**3D Printing File for Spice Lid with Moisture-Absorbing Rice Cage** This 3D printing file features a spice lid with a built-in rice cage to absorb moisture and keep your spices fresh. It fits most plastic spice jars, and for a fitting…
I wanted a solid piece to fill the empty vent covers to help keep heat & fumes in, but also wanted somewhere to place a temperature & moisture sensor, so I figured this will do the trick. I made the hole 41.5mm, which fits my AliExpress…
Little Case for the SparkFun Soil Moisture Sensor ( https://www.sparkfun.com/products/13322 ) upper electronics section. Requires: 2x M3x8
A simple cap for the generic 12-pot hydoponics setups which are sold across the web. Helps to prevent growth of algae. For instance: https://www.amazon.com/gp/product/B089NNTJ7W/ Print Settings Rafts: No Supports: No Resolution: 200…
Cover for Capacitive Soil Moisture sensor https://www.amazon.it/dp/B07DDFZ3MD?ref_=cm_sw_r_cp_ud_dp_6RX71C3XNRJ7X19JS65C Bolts M3*8: https://www.amazon.it/gp/aw/d/B073ZV8GW3?ref=ppx_pt2_mob_b_prod_image # If you like it ;)…
Existing cases would not fit my Sensor, most likely the dimensions vary for remakes and i'd like a half-way good enclosure with screws so i made this parametric OpenSCAD model which you may modify for your needs.
Due to its modern look, it will not disfigure our rooms, and additionally, it can have an aesthetic function. The device has a large contact surface of the absorber granules with air - thus the efficiency automatically increases.
YL-69 case redone for a tighter and stable fit. Please use 2 pcs. 2x6mm screws to mount as shown in the photo. Also added a case for the YL-38 comparator. Needs another 2x6mm screw to fasten. Category: Electronics
This design allows for a waterproof full burial of the AITRIP 10 Pack Capacitive Soil Moisture Sensor Corrosion Resistant for Arduino Moisture Detection Garden Watering DIY Electronic for Arduino and Raspberry Pi . Dec 2025 update - V3.3…
Printing instructions: 40% infill PETG, ABS recommended Tree support for cable outlet Find more detailed information about this model on my original upload
This is a set of boxes designed to protect filament spools from dust and moisture. It was specifically designed for the Snapmaker U1. It also allows spools to be loaded from the front instead of from the side. Each box consists of: 1…
Capacitive Soil Moisture Sensor V2.0 Housing 2x2M 10mm screws To improve water resistance you can use a sealant in channels placment marked with red color on image. You need to trim pins on sensor on back side as they stick to much(nail…
For using as a moisturizer, add a small absorbant sponge, pad or several layers of paper towel. For use as a dryer for something like a filament dryer, simply add your dessicant and close the lid.
As the zigbee enables soil moisture sensor b-parasite, i will be deployed in soil pots or outside. This leaves the sensor open to the elements. The sensor has a light and humidity sensor on board, therefore it needs airflow and sunlight…
Should be easily printable. I have done it with a layer height of 0.2mm in PLA and so far it works. The Passthrough might be a little tight, but I just used a wrench.
The holder is designed to securely cap off a Staples 2 oz. Envelope Moistener. Designed to avoid liquid drying out. I have also designed a holder to keep 2 envelope moisteners in place when not in use, preventing it from getting lost. We…
The Qualitative Soil Sensor is a compact, low-power environmental monitor powered by the XIAO ESP32-C6. Running on a single AA battery, it offers long-lasting operation and real-time soil condition updates. It features Pre-Calibrated…
AD5X/AD5M Vent Cover With Cutout to suit 41mm Temp/Moisture Sensor off Aliexpress
My Klein Moisture Sensor did not come with a protective case. I have design skills and a 3D printer, so I decided to design a case that fits this nice tool like a glove. There is enough depth to put in a piece of very thin foam to protect…
Sensor housing. Protects electronics from water and moisture
A simple three-part cover for a soil moisture meter which I have ordered in China for my gardening automation. Example Shop Link for reference: https://www.aliexpress.com/item/4000817618470.html Print instructions Printed with: PETG Layer…
Casing for the capacitive moisture sensors, broadely available on eg amazon. Making it a bit more robust and able to waterproof. Use 4x M2.5x10 screws to close and lock the sensors cable into the case. should be a tight fit. I removed the…
Full protection case for soil moisture sensor. Fill the upper part with water resistant material to protect the electronic part. The screw (M3) on the bottom is intent to set the operating height of the sensor. It is the solo version…
Here's a useful tool to get your soldering iron clean! It should fit the typical brass wool and sponge that ship in soldering iron station kits sold on AliExpress. Print recommendation: the internal area will need supports, but avoid…
Protect the electronics of your HW-390 sernsor with this cover. The cover uses a single 3mm screw. No supports needed.
Temp, humidity, soil moisture sensor with an OLED display in a tiny package. It also logs the data to thingspeak.com for some nice graphs. Required parts: DHT11 Temperature/humidity sensor Capacitive Soil moisture sensor Wemos D1 mini…
Stand for micro bit in flower pot. Outer diameter for pipe 8 mm.
Designed this little tool to mount the waterresistant DS18B20 (7mm stainless-steel version) on top of a Capacitive-Soil-Moisture-Sensor to watch the earth temperature and the moisture level via IOT in the flowerpot on the balcony. With a…
Print with 0.2 layer height. Use a heat resistant filament as it can heat up and fry the dryer or melt this part.
45° bracket for moisture - proof lights, made this for the work bench in my garage for a good light distribution. If the light shines on you from top, you'll create your own shadow, if the light is in front it will just blind you, the 45°…
Designed to work with https://www.printables.com/model/611047-dyna-dry-box-filament-box-4l It was lacking any place for a moisture sensor, so I've quickly whipped up a simple way to mount one. This is designed to mount this sensor:…
This is a glue stick applicator, using a moist sponge to help distribute the glue in a thin and even layer. It annoyed me that the glue stick gave a rough texture to the print surface and actually held the prints a little too well. With…
Pegboard Hook for Klein Moisture Meter. Needs supports to print correctly.
Portable Moisture Sensor Pen Release v1.3 Parts needed: ESP NodeMCU 8266 with built in screen Moisture Sensor (even though this is a link to a v2.0 Sensor, i have tested it with a multimeter and checked that it works completely as…
I often eat lunch in my office (detached from my house). Instead of taking the time (30 seconds) to walk back into my house to wash my hands, I ordered moist towelettes for my office. This allows me to wash my hands without leaving the…
Case for https://www.diymore.cc/products/esp32-wifi-bluetooth-cp2104-dht11-soil-temperature-humidity-sensor-18650-battery-base Added a top to fit a little solar panel as this unit isn't the best at power consumption. A 18650 will run out…
This is a deep-soil sensor mount for the Capacitive Soil Moisture Sensor v1.2…
A moisture collector for your tabletop miniature and role-playing games. If you like this free files please check out our Patreon here... https://www.patreon.com/user?u=89784988 nonPareil institute is committed to building better futures…
This is a hide meant to hold moist sphagnum moss, for use in a low-maintenance arid springtail enclosure. It is sized for a Karat 8oz clear PET deli cup to fit onto. (e.g. https://www.amazon.com/dp/B0BT9HYYPR ). For an arid springtail…
Eine Halterung für den Lechuza-Feuchtemesser (Artikel Nr. 19714). Die Befestigung kann mit 2 Schrauben Ø 2,5 mm oder mit Klebestreifen (z.B. Powerstrips) erfolgen. Für den Druck ist kein Support erforderlich. Translation: DeepL A holder…
The size of the box is 3*26*17. Three components, open the cover and put in silica gel desiccant.
This is a Moisture Probe Sensor implementing a ESP32 TTGO T-Display, an analog Moisture Sensor and a small LiPo battery GitHub: Link Video:
Uses one of those soil sensors, https://duckduckgo.com/?q=capacitive+soil+sensor&iax=images&ia=images Together with https://www.wemos.cc/en/latest/d1/d1_mini.html And (optionally) 7805 (I use it to lower the voltage from supply)…
Don't spend your hard-earned dollars on buying disposable Dry-Brik for your hearing aid dryers (Zephyr) every couple of months! Simply print out the No-Moist box and lid and add rechargeable desiccant! You must print in either PETG or…
A simple tray/box to storage silica for moisture issues. This could be used in a machine, in a cupboard, or even on a window area. If you like this print, or want to support me, please consider donating a coffee here…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … A little shelf to store boxes for flushable moist wipes near…
Fitting for those sensors you can see in the images
To redirect the hot humid air coming from the dishwasher during the drying phase from the bottom of the furniture. The prototype had too small lips so I had to tape it down, but the uploaded version already has the lips 2mm longer for…
Description This is a 3D printable housing for capacitive moisture sensors. It was designed to make your projects cleaner and more practical by securely holding the sensor in a sturdy enclosure while providing a neat cable output. Why…
Our plant pot left moisture stains on the wooden table. To try to prevent this, I've designed this spacer. The spacer should allow for some ventilation underneath the pot as well as preventing direct contact between the pot and the wooden…
Fix the moisture sensor into the center hole of the filament spool of prusament
The current design of this protective case establish a stable connection from sensor to soil. Even when it is capacitive sensor a permanent contact to soil is neccesary for reliable moisture values. Examples of these values are shown in…
Star Wars Moisture Vaporator Vaporator was created to fit to the Hasbro Black Series Star Wars Action Figures . Scale 1:12 (6 inch standard) – 100% You can easily resize to 1/18 3.75 (inches standard, the 10cm Star Wars Action figures) by…
Read my post on using this to create a self-watering system for my Christmas tree. https://johnzanussi.com/posts/diy-automated-christmas-tree-watering The capacitive moisture sensor friction fits into the print, but a dab of hot or super…
A simple box to enclose a capacitive soil moisture sensor. Used transparent PETG so that the active LED can be seen. Printed with Prusa MK3S+. Use silicone to seal the openings if used outdoor.
Nothing to it really. Print it open side up with supports for the legs. I like tree support.
Parts: 18mm M2.5 Screws: https://www.mcmaster.com/92125A102 M2.5 nuts: https://www.mcmaster.com/90591A270/ Soil Moisture meter: https://www.adafruit.com/product/4026 Cable: https://www.adafruit.com/product/3950 Battery:…
Descripción en Castellano Este plato decorativo ha sido diseñado específicamente para colocarse bajo una lámpara de sal . Su función es recoger la exudación (el "sudor" de sal) que estas lámparas producen en ambientes húmedos, protegiendo…
Moisture plug for junction boxes, it's used to avoid the creation of moisture inside the box due to temperature changes. I've designed it some time ago, the bolt is not sized correctly, you'll need a 17 metric wrench but it's not a…
This module allows yours SMARS to detect the quantity of water in soil. to build it, you will need this sensor: https://amzn.to/2L7y7Dd http://s.click.aliexpress.com/e/bBkcQOFm Join us in the Facebook group! https://goo.gl/4EgJhX Facebook…
This is a two part project for soil moisture sensors for your garden. Plate 1 has the parts for the housing that holds an ESP8266 [link] , BME 280 temperature and humidity sensor [link] and a receiver for the resistive sensors (included…
Holder for a moisture sensor
This is a motion sensor housing originally designed for Halloween decor motions sensors. The mounting holes inside the enclosure are for a custom designed PCB breakout board. The cable seals are sized to pass through cat6 cable. Hardware:…
this model will allow you to store more filament in your dur box while keeping the moisture absorber on the out side you do need to cut in to your dry box but it is SOOO worth it because it dropped the humidly by 18-20 % and I could fit…
I designed and printed the model for some moisture and temperature gauges which we have dotted about the house. They are round so kept falling over or rolling away, I wanted to design and print a little stand to keep them upright on…
Requires supports, prints quickly and holds the silicone tube on the sensor. Designed to be compatible with Grow Moisture Sensors
This lid is for use with DampFree or Anko 300g Moisture Absorber containers available from Bunnings and Kmart Australia. The product is marketed as a single use disposable moisture absorber for use in cupboards and wardrobes. It seems…
This a simple case for the BM31 moisture measure instrument. I wanted to have one without buying any of the expensive ones. It fits the device perfectly. It's possible to add some small rubber pads to the inside so that it lays on a…
a wall box for Aliexpress moisture meter to be glued https://www.aliexpress.com/item/1005005532078659.html
A simple soil moisture enclosure with a simple click mechanism to close the top part. I printed another enclosure for the Arduino Nano and the Nokia 5110 LCD, so I had to design the sensor enclosure only, and I will be using this project…
