Counting matching models…
A Simple police car to be used in Zombicide Prints in three parts that need to be glued together. Other Versions There is also a version for laser-cutting . Support My Work Should you want to, you can support me on Patreon . If you are…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…
I tried all available clip designs and found that flyin_kapet's “Notch” version worked best. These are a simple revision of his design that doubles and triples the capacity. You do need to push the pellets into the center of the clip with…
This is a 3pc sign that can be placed on a self or desk. Printing this in 3pcs eliminates the need for supports which makes it a very quick print. I used super glue to make sure the logo and the frame stayed together. I printed everything…
In a world where there's lots of electronics and worry, we gotta keep our kids and ourselves busy. How should we do this? Pinball. Pinball with a modern twist. Gameplay Details This pinball machine that has the following features:…
If you want to use this for a clamp meter that is different from the fluke 378/377 send me comment and I'll see what I can do Have attached a video to show the different ways I use to store them. Print with 2 walls and zero infill. Any…
First we made a constraint box the size of the measurements we had and extruded it. We got the measurements by using the asf and dsf formulas. Then we outlined our image to get the dish of the jordan and have it sitting inside something.…
This was our original sketch: Using the ASF and DSF formulas, we were able to figure out the width and height of the constraint box. On another plane, we started to trace the image on top of the constraint box. We set the thickness to 0.5…
These sample plates allow you to quickly compare the different BumpMesh default patterns in three different sizes, helping you determine the best choice for your own designs. BumpMesh.com is an awesome free tool created by the YouTuber…
Michael Jordan jumpman 23 logo wall art, made via TinkerCAD print flat, I painted the “23” after, but could also be achieved via AMS painting.
This is a world map builder with interlocking peices that can be used for an RPG map or just for fun. This is a modular expansion that works with all things found here:…
The stock TBS 4-in-1 multi protocol module will not fit into the nano bay of a lite radio (BetaFPV). I redesigned the back plate of the module by extending the gap between the radio and the module. You can use the original screws to mount…
Air Jordan "Jumpman" 16th Birthday Cake Topper Printed in PLA 0.2mm layer height 0.4mm stock nozzle Print with supports for the prongs that stick into the cake Print reversed (face down) to ensure a nice surface finish when displayed on…
(This is a work in progress. I will update this description later on). Links to 3D models that I used as part of my build but that I did not design or modify: Vertical bearing holders: https://www.thingiverse.com/thing:3731117
I added a Volt/Ampmeter to my bench power supply. Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
Capture the moment of pure hardwood dominance. This figure features Michael Jordan in his most iconic pose – soaring for another championship, with a face full of competitive fury. A perfect desk companion for NBA fans, basketball…
The "Hare Jordan" campaign, launched in 1992, is one of the most iconic marketing efforts by Jordan Brand, blending Michael Jordan's basketball prowess with the playful charm of Bugs Bunny from Looney Tunes. Aired during Super Bowl XXVI…
This is a crossover of the Boston Celtics mascot, the leprechaun, and the Air Jordan Jumpman logo. I used Copilot to generate a few silhouettes as a base and created the final logo within Inkscape. Then used the Makerlab “Make my Sign”…
I replaced the 5A PSU with a 10A Meanwell one, which I mounted to the back, which got in the way of the included filament holder. I designed this to use the existing screws from the top handle and holes, while also adding in a filament…
New bottom plate with 80mm fan & riser feet for better cooling. I used an Arctic Silent F8TC with temp. sensor and the MPMD stays stable at 30°C. But any other 80mm silent 12V will do as well. I run Arctic Silent F8 fans on my Ender 3…
3D Printed Design of my Lampman (originaly made of Wood). Printed in Wood Filament. 6 x 70mm Lockscrews with wing Nuts needed. IKEA Tertial Lamp has to be dismounted. Cut of at Lamphead and just plug in. If printed in PLA Wood or PETG…
I designed this foots in order to make the MPMD a little bit quieter and fresh. Need to be printed in flexible material. 3 perimeters, 30% rectilinear infill. Is suspossed to be in position with the stock foots of the printer without…
I have all my printers runing with octoprint and my new MonoPrice Mini Delta is joining the club. But I need something to keep the raspberry pi and the printer in one single body. Also, wanna try the new raspberry 3 model A. So I searched…
I bought this printer mainly to use as a self-education tool. One of the things on my list was to redraw it in CAD to learn how delta printers work and then make a few personalized upgrades. So I took it all apart and plan to put it all…
The missing part to raise your MPMD off the ground and allow more air to cool the controller. It does a great deal to silence the fan and the flex filament will allow for some vibration absorption. I used some double sided tape to…
Material: ABS Infill: 100%
This endstop spacer will help you place the endstops of a Monoprice Mini Delta Printer at an identical position. Use the same endstop spacer for all 3 towers to avoid inconsistencies which you are trying to avoid by using this item. If…
No support is required, but inner/outer wall order is recommended. I used Galaxy PLA to print it. Bumpmesh parameters:
BOM (1) arm from a 15mm binder clip (1) m3 bolt (<6mm preferred but if they are longer they can just run down the original clip holes (2+) 3/8" x ¼" neodymium magnets (Glue them in or they'll inevitably jump out) Bed Clip Alignment Remove…
Zombicide simplified Pimpmobile, to use with original token & printable in less than 30 minutes. I wanted to print @kap42 Pimpmobile, but with a simplified design, to make it printable in less than 30 minutes and specially without havin…
Why another set of feet? Wait? Shoes for feet? wtf is going on? I recently printed the "Monoprice Mini Delta Feet Replacement" by 3Dgoon in PLA, as I didn't have Flex Filament yet. Now that I have some TPU 55D, I kinda liked the look of…
Large, half-height bin for the Jumpmaster. I'll admit, this is not perfect. Ideally the space under the nose would be brought up a bit to tilt the ship, but instead it basically pivots on the peg on the bottom of the ship. Fits fine, just…
Just some riser feet for the MPMD (V2)
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
I printed this model in black PLA with 0.2 mm, 30% infill and without supports.
So I've decided to change the linear bearings on my MP Mini Delta to LME8UUs. Those have a diameter of 16mm instead of the usual 15mm on the LM8UUs, so I needed new carriages. I've decided to model them up from scratch myself, and they…
I love all the Bearing Spool Holders. They allow smoother feed of filament. After printing this model, I found that the Inland spools did not fit on the new spool holder. So if simple increased the angle at the end and set it lower on the…
This is to hold a 5" mirror from Hobby Lobby ( https://www.hobbylobby.com/Crafts-Hobbies/Glass-Crafting/Mirrors/Round-Craft-Mirrors---5%22/p/22814 ) to a Monoprice Mini Delta Printer. I made it customizable though, so feel free to use the…
Thanks to ksihota for the measurements. I made mine 20mm tall, 1.6mm thick in most places, 0.8mm on the ends. MPMD shield. Check out my enclosure as well, they work together perfectly. Category: 3D Printer Accessories
Remixed base to fit on Monoprice mini delta bed Ø110mm. Category: Tools
What's this? This is a new extruder top for the Monoprice Mini Delta (MPMD), which is aimed at printing flexible filaments. does it work? I've been successfully printing TPU with shore-hardness of 55D, at a speed of 20mm/s (mk1) - 30mm/s…
I needed a mountable enclosure for an Adafruit MPM3610 buck convertor, and liked the snapfit qualities of the Adafruit QTPy case: https://learn.adafruit.com/qt-py-snap-fit-case This is designed for mounting a Adafruit MPM3610 buck…
This is my take on a compact top mounted spool holder for the Monoprice mini delta. It uses the 4 holes for the handle as the mounting point. I personally used the original screws, but I included a printable friction fit pin to use in…
Slip this on top of the Monoprice Mini Delta Printer and put a spool on top. Category: 3D Printer Accessories
The texture was created using https://bumpmesh.com by CNC Kitchen . You can see the settings I used in the pictures. It really adds a nice feel to the shifter rather than just smooth walls. I have provided the step file if you have to…
Sized to use the spec power supply and inlet from a Voron V0.1 and has mounting for an SKR pico control board or raspberry pi.
Found the following button on Amazon for LED strip control and wanted to add it to my mini delta. https://www.amazon.com/gp/product/B01C4BFH7I/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&psc=1 Modified dcpdx's remix to house the button.…
Pumpmon Digimon Creature Model
The famous Jumpman logo reimagined as a wizard dunking a d20. Supports are required. Included model only works with miniature dice, for regular dice it is recommended to print at 250% size.
Requires M2 screws to attach switch to adapter and uses original screws/nuts to printer. No loss in useable height. I connected wires to C and NC using a 5 pin JST-xh connector. Only tested on a V1 mini delta but I don't see why it…
Discover the charm of this adorable hybrid creature that brings whimsical magic to any space with this detailed 3D printable STL model! This delightful figurine captures the perfect blend of chipmunk cuteness and primate playfulness,…
Description This is a side product of my top plate for flexible filament for the MPMD , basically the mk3's mount solution as a stand-alone. I have the PTFE tube jump every now and then when printing non-flex filaments with Spconnol's…
My take on the binder clip bed retainer and tower shield for MPMD. M2.5 heat set inserts installed in the 2b part then gets installed under the platform. Tight fit to get between motor and the plate but it fits. M3 heat set insert for the…
On/Off/Pulse knob for MPM Krysia kitchen appliance (model 116). Knob in our appliance broke off a long time ago. Now we have a 3D printer, so… maybe try and design a replacement? Printed on BambuLab P1S Nozzle: 0.4mm Layer height: 0.28mm…
🏀 LightBox Jumpman Graffiti – Lámpara decorativa multicolor para impresión 3D ¡Traé el estilo urbano a tu espacio con este diseño inspirado en el legendario logo de Jordan! Esta LightBox presenta al clásico Jumpman sobre un fondo vibrante…
A version of the Elegant cabinet door pull/handle specifically designed for customizing with BumpMesh.com. Import the handle into BumpMesh.com Under Projection , select "Cylindrical" Under Masking select "Include only" "Fill" paint only…
Print 3, glue to 140mm glass disc, attach heater. https://www.amazon.com/gp/product/B077S4C3PL/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/38icEx0YRI4 Category: 3D Printing
Remixed Maksym's box to have two short rows to hold the dies that I use with the Ideal Crimpmaster. Box will handle short dies from most manufacturers as well as most short clone dies. Used 4-40x 1-1/4 inch screws. Used PETG for the box…
Snapmaker original's layer cooling fan is not adjustable.(Always on). This adjuster provide to manual cooling air adjusting. Check below. https://twitter.com/N3uuSp3ak/status/1238499397916229632 ===BOM=== ・Rotary switch (12 contacts )…
for installing the walls is required m3 nuts and m3x10 screws
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
Remplacement pour partie gauche (fixe) de verrou MPM pour persienne. Print Settings Supports: Yes Infill: 50% Notes: Supports PETG utilisé pour une meilleure résistance Infill: 50% en Cubic (plus n'est pas utile) 3 Walls 4 Top & Bottom…
A clean simple caddy for all of your MP Mini Delta's printer tools. Including: Scraper 3 Hex Keys SD Card Case USB Cable Fits neatly behind top handle. I attached with hook and loop, but not mandatory. Caddy is labeled with machine name…
Adapter for GLS115 Mini prism Pole to Rampmount Tablet Claw
3D printables swatches for all patterns from BumpMesh.com
A simple spacer you might need when installing your Lampmount onto your REPRack
The cube's sizes are 50x50 mm. The textures included are Brick, Bubbles, Crystal, Carbon Fiber, Grip Surface, Hexagons, Isogrid, Noise and Wood 2. Recommended Print Settings: Layer height of 0.15 mm or below Relatively low speed for extra…
I would like to thank Paweł Zięba very much because thanks to him I was able to repair my mixer, however, I had to edit it a bit because I had an old model
I had the problem, that my lampsocket broke, so i cant mount the lamp on the ceiling. So I designed this thing. Please note: This is designt for a Lamp with a lamp with ayn inner socket diameter of 109mm. Ich hatte das Problem, dass mein…
Should work for every tubular light with a diameter of 27 mm (or less with not a perfect fit) Can be used on either end or in the middle of a REPRACK bracket and can be screwed in for better support
日本の観光地などで販売されている、日付や名前を刻印できるメダルを展示するためのパネルです。 直径31mm、厚さ2.5mmのメダルに対応しています。 This is a display panel for medals that can be engraved with dates and names, and are sold at tourist spots in Japan. It is compatible with medals with a diameter…
🎨 Automatic Ink-Shading (Panel-Lining) for Multi-Color 3D Printing I added an automatic geometric ink-shading (panel-lining / 墨入れ) feature to BumpMesh_Color , an open-source multi-color 3D printing web tool! It adds deep physical relief…
(Note: The original file names are in Turkish. "Kaya saplaması delik deneme" translates to "Rock Bolt Hole Trial".) This model is designed to represent a mining-type rough borehole for rock bolt applications. It features a specialized…
A two color variant of the door handle. This file includes parts for multicolor printing.
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
Modular palisade fortress/ encampment setup. As always, no supports needed! Round “peg and hole” connection for maximum flexibility. Simple prints with great ecstatics. Each piece has build-in holes for magnets (5x2mm) Easy storage. Easy…
Swedish ap mine from 1943. Made from painted carboard and TNT. Very short lived in swedish armed forces due to its excellent humid retractring capability. Not suited for storage. 3D-print dont contains any moving part and cant be made to…
This is my version of the swedish ap-mine, trampmina m/49. Made of metal in its origin. Non working replica for educational purpose. No working parts.
