Counting matching models…
Impression en PETG avec supports pour surplombs >45°; Remplissage 30%; coque épaisseur mini 2mm; Parois verticales 5. Un petit coup de papier de verre pour quelques imperfections, de la patience… Je joins le fichier F3D pour vos…
Description Use Case I remixed this GPS support model so that it holds on a Ø12 mm tube. Be careful to take a break during printing to slide the nuts that will be held in place during tightening. Hardware need: 2 Vis CHC M8x25 2 M8 brake…
A simple organizer for BantamTools/Othermill Bits and fans
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
While working on a project recently, I found that I couldn't easily find metal pins of the exact length I needed, and I didn't have the tools to cut them to size. I did, however, have plenty of PLA filament that was the right diameter!…
HEY EVERY !! IT ' S ME!!! EV3RY BUDDY ' S FAVORITE [[Number 1 Rated Salesman 1997]] Spamton G. Spamton!!
This ist the uncut model to my original model https://www.printables.com/de/model/39467-stormtooper-first-order-tfa-helm It is without the holders and greablies. you can decide if you want to Print it with the front. If you want to add…
This insert goes into the TomTom port on your dash, if equipped. Most 2013+ models had the tomtom port (for the OEM navigation). I ordered an automatic closing Cell phone holder from amazon, link below and simply mounted the end of it to…
sunscreen found on Tingiverse for my motorbuddy.
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3105036 . This remixed version is sturdier and made…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
ReadMe.txt Schutzkappe fuer TomTom Rider 4xx Anwendung: Regenschutz für Ladehalter der TomTom Rider 4xx Serie Dank an: JordanAltena https://www.thingiverse.com/thing:2819259 Stueckliste: 1 Stueck Schutzkappe V04 Einschraenkung: keine…
BetaFPV Pavo Femto Storage Box – Remix of SnapLock Storage Boxes This is a remix of the SnapLock Storage Boxes (parametric) by Hugo, designed specifically to store the BetaFPV Pavo Femto drone along with four 450mAh Lava batteries . It…
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
So I bought TomTom Rider 400 and had it sent to me. When I received it, I noticed that the power button is broken
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
While I made this model completely from scratch, credit where credit is due. I got the inspiration from this particular model: https://www.printables.com/model/1231690-betafpv-pavo-femto-storage-femto The previous one was sized for 450mAh…
No-slam toilet seat hinges are subject to high stresses when the seat is quickly forced closed. This part replaces one of the hinge halves to salvage the seat. I used PETG but other materials might also work. Hexagon screw holes were used…
The Katz-Moses sharpening guide from kmtools.com is more than a bit fiddly to align properly without dropping your chisel a dozen times during the process, so I designed a jig to hold everything steady and get you close to the two most…
This is my DIY Palmtop Cyberdeck using the Google Pixel 3A and a mini wireless Bluetooth keyboard. It currently utilizes a Windows 10 theme but can also run Ubuntu Touch. Recommended material: PETG Features : Sleek, simple squared design…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
This is a ball/socket mounting plate for a TomTom GPS. It was designed to be compatible with most TomTom GPS products. There are two types of mounts: A ball mount, for mounting your TomTom into a ball socket. A threaded socket mount with…
Clips onto the back of the following tomtom models: START 42, START 52, START 62, VIA 52, VIA 53, VIA 62 The model obviously just provides 4 screw holes and not a ball mount, this is because you also need to print this model…
For TomTom with ball mount e.g. TomTom Go 500 etc. If your suction cup no longer holds onto the windshield (my situation), you can use this. Much more durable and cheaper :) Depend of the mounting place use appropriate model. 3mf file…
TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case.
You can use the model however you like, as long as you give me credit.
Raincover for the TomTom Rider mount to protect the vulnerable contacts. Suitable for Tomtom Rider 40/400/410/420/450/550. This is a remixed version of https://www.thingiverse.com/thing:3428080 I have adjusted this version so that it is…
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
You can use the template however you like, as long as you give me credit.
A friend had a bit of cardboard taped over the top of his GPS unit to stop the glare from his steeply sloping windscreen. I figured there had to be a better way! This cover slips nicely on top of the TomTom device and all buttons and…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
While the TomTom Rider is an excellent sat-nav on my bike, I've been increasingly using Calimoto for rides when I just want to enjoy myself and discover new roads (it's a great app and it's free to try). This adaptor is available with or…
Tomtom Rider 500/550 GPS adapter for phone holder
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 0.3 PLA PolyTerra Cotton White…
Since I now have my third motorcycle and didn't want to buy another ridiculously overpriced mount from TomTom, I simply searched what 3D models are already available. The mount is attached to my Royal Enfield Himalayan and holds…
Basically the same as the original, but with a long mould for not pushing onto the contacts, when cap ist on.... and maybe a bit thicker, to sink a TomTom Logo 0.5mm deep into the bottom. ;) TomTom Logo can be taken from Wikipedias TomTom…
Another TomTom Rider stand . I have made it for my TomTom Rider 550. I think it can be used also for 4xx model. This model is a work in progress. I want add 2 pin (pogopin?) for power up. Category: Other
This is my attempt at a very small case for the Femtofox Meshtastic node. More information on the Femtofox can be found here: https://github.com/femtofox/femtofox Some notes: Additional Components: N Female to IPX/UFL RG178 Cable - 10 cm…
This is a remixed and customized version of the original Rugged Box (Parametric) , modified specifically to fit and protect the BetaFPV Pavo Femto drone. The foam for the top cover was reused from the original packaging the drone was…
This is a two-part 3D-printable holder that accepts the original TomTom magnetic car mount (the small magnetic plate that comes with the Tom device) and clamps onto a car air vent. It lets you avoid sticking the magnetic base to your…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Dart Zone Aeon Pro Pump Kit. Converts the Aeon Pro from top priming…
support for tomtom xl, with module to use as an alternative also any type of mobile phone, designed and printed for a friend with a Bmw GS motorcycle but I think it can also go for other motorcycles that have a tubular between 11 and 13…
There are 2 different models: ChumtoadOriginal.stl - original low-poly model of a Chumtoad from the Half-Life game Chumtoad_WithEye.stl - version with eye modeled based on the original texture Be sure to enable supports for its belly!…
This small but powerful drifting model has a design flaw: a short servo arm that often pops out of its housing during intense driving. I have designed a new arm with improved parameters. It is easy to install and simply replaces the…
Batteriefach / Gehäuse / DJI Lite Gehäusehalterung
This is a little stand that goes in the original TomTom port of 2013+ era Fiat 500's. I designed this to better place my small garage door opener since I lost the clip for it. It fits a chamberlain/liftmaster 3-button remote and if you…
Single part with standard RAM ball and tomtom handle on the opposite side
I have a router jig and table from Katz-Moses Tools: https://kmtools.com/products/benchtop-router-table-for-3x3-custom-trim-router-jig-presale It's a decent portable solution for small shops, but it doesn't have anything built in for dust…
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used…
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
My dad needed an adapter plate so he could use his TomTom Rider 500 motorcycle GPS in the car. This thing was almost perfect. Designed to fit a phone holder i had lying around that had a 17.2mm ball instead of the 17mm of the original.…
Attach your TomTom GO using this and a M5 Screw. There's a 25mm thread long M5 thread in the adapter, try to use a screw that uses most of it, to massively decrease the chance of failure. Tested with TomTomGo Expert Camper Max and Start…
This is a desk stand for the Temtop M2000 series air quality meters. I designed it to make long term monitoring more practical, and to keep the screen visible, as the meter itself is designed in more of a handheld form factor. I printed…
A compact solution for fastening a TomTom Rider active base to a common 22mm diameter bracket on my wife's Honda Transalp XL 750. Note: Due to size limitations the base is rotated by 90°. It hasn't been any problem, because the mount…
Made a two-part process to allow you to have 3d tires on your board while still seeing the numbers
no a la venta Adaptador para BMW R1200 R1250GS se agradece que dejen un comentario con fotos y se añada a me gusta.
Umton watercolor palette for six colours Print instructions Category: Hobby Summary Umton watercolor palette for six colours
Simple TomTom RIder 400 box Category: Tool Holders & Boxes
A DIY portable cyberdeck built from a Google Pixel 3 XL running Kali NetHunter, paired with a Bluetooth keyboard and enclosed in a custom 3D-printed clamshell case. This compact setup provides a highly portable, low-cost platform for…
Rubber part of TomTom holder ball joint failed. It is just a hollow sphere. With a bit of trial and error printed the right size from TPE/TPU. TomTom won't fall out anymore and can be positioned again. Print with the open side down in a…
My bike is Ducati MTS GT 2020, I'm 185cm tall, this is relevant to the parts where I talk about seeing the instruments and gps displays, your experience will vary based on your bike and height, download the Fusion project and adjust to…
Replace the cardboard tokens for Mr. Torgue's Arena of Badassery. There are one-color options and multicolor options to download.
As the fifth and last member of the God Hand, Griffith's name, Femto, symbolizes his demonic rebirth during the eclipse. "Femto" represents a metamorphosis into a transcendent, yet malevolent, being; he becomes an emotionless, pure evil…
endcap for the zumtobel s2 light system
This is a wall mount bracket for the Temtop M2000 series air quality meters. I designed it to make long term monitoring more practical, and to keep the screen visible, as the meter itself is designed with a handheld form factor. I hope…
Omnium Cargo Rear Light for Lezyne Femto Passt genau in der Omnium Rail Passend für Lezyne Femto
Mount for GPS module nano and Buzzer jhe42b-s. Pavo Femto\pico
3D-Printable Wall Mount for BetaFPV Pavo Femto Designed for easy installation, the mount includes pre-drilled holes (3mm) for screws or adhesive mounting. Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 2-3 walls 100%…
starwars like snile kangaru hybrid HORSE Have Fun
Ständer für TomTom Rider 4x0 / 5x0 Ich habe diesen Ständer entworfen, um mein TomTom Rider 400 bequem am Schreibtisch nutzen zu können – beim Planen von Routen, bei System-Updates oder einfach zum Laden. Wichtig war mir dabei, dass das…
Halterung für TomTom Rider 500/550 an einer Tenere XT 660 Z. Durchmesser 16 mm Stangen.
180mm printable bars for PalmtopSupply's Aeon Pro Pump Kit - Full Length version Print with 4+ walls, and high infill
Note: You'll have to cut out part of the side protection to get SD cards in and out and to reach buttons. should be easy and it makes the design flexible to multiple different configurations while still protecting all the way around.…
SUPPORTO GPS TOMTOM X MOTO Realizzato:www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 Nozzle: 0,8 Temperatura di Stampa: 205° Temperatura Piatto: 60° Riempimento: 20% Filamento: PLA XINGTONGZHILIAN
für TOMTOM GO 5200 und GO 6200 Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
Jest to osłona słoneczna w pozycji pionowej
Dieser Adapter ersetzt die originale Saugfußhalterung des TomTom Rider 400. Zusätzlich wird ein M4 Gewindeeinsatz zum einschmelzen sowie eine flache Schraube benötigt. Das Bauteilmuss gegebenenfalls so nachbearbeitet werden, dass das es…
Case for Pavo Femto with 4x 450mah BetaFPV Lava batteries without gap between the bottom and the top parts.
2023.04 update: the holes for the gopro mount apparently created a stress-riser or something and the mount snapped off, I'm pretty sure glueing it on would work (and will likely repair mine with glue unless I decide to mount the gopro…
I liked the original idea and make of this adapter - but did not want to have my phone sit on top of the adapter itself. I have a quad lock mounted beside the Tomtom rider connector; therefore I just wanted the USB connection to be…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Trion Spectre Kit. Store spacers in your sights and quickly swap…
Use this plate to easily mount a TomTom in place of a Garmin on your BMW R1200GS or R1250GS. Will likely also work on the BMW S1000XR and other motorcycles with the sat-nav mounted in the same way.
Model already oriented for printing You can add a color to the logo layer just like I did
Every now and then I ride with Navi (TomTom Rider 550) on my KTM SMC-R (2019) Unfortunately, the original TomTom mount looks really shitty and is also very high. I'm also too lazy to unmount them completely every time I drive without the…
22mm TomTom Rider 40 mount kit If your RAM mount comes to far up your face on your Honda Varadero This allow you to flat-mount a regular 30x38 pattern tomtom ( Rider ) 40 on any bar. ( i use a piece of 22mm pipe , as i am to cheap to buy…
TomTom GO 5200 incl. Accessories Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category: Automotive
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: Simple way to use USB Type-C to get 5V at up to 3A (15W) - Power - Electronic Component and Engineering Solution Forum -…
This is a mount for the TomTom rider car mount that can be attached in the ducato tablet holder instead of the standard suction cup as this fails in warm weather.
This is a ball mount to replace the TomTom Blue&Me GPS dock in Fiat 500/500e models (generally 2007-2015). You have to remove the dock from the dashboard with moderate force (or carve an identically shaped oval hole in newer/older models…
I wanted my BoomToob to fire rivals (because they're just fun). So i made 3 full-size rival shells plus one half-size, which requires the shell-adapter: Shell_Rival: Simple full-size rival shell. Just print and play Shell_Rival_Barrel:…
TomTom logo Keychain A simple keychain with the (2021) TomTom logo, you can print with different color, just change filament at the right height.
Remake to optimize design and get more current out of the adaptor for charging. Electronics are described here: iCharging | Minty Boost | Adafruit Learning System
Spodní část držáku Tomtom RIDER 400-550
Mount for the Temtop Airquality monitor. Easy to mount to the shelf.
Case for the tomtom bandit with room for a few SD carts, an extra battery and some extra's. I printed the lens cap and the case top out of TPE, but TPU or any other soft to semi soft flexable material would do. Case bottom is printed out…
![[WIP] 2007-2015 Fiat 500 phone mount for TomTom GPS dock port](https://media.printables.com/media/prints/df94d6bf-f2f8-4195-9a34-4671b10ce52d/images/12903526_d7899dd7-839f-43c8-9111-4835c96ace4e_0ce0db86-0a00-4bd4-ade0-c95c9abef672/screenshot-2026-05-13-122656.png)
