687 models
The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
For pulling CAT5/6/7 cable snag-free through other mess of cables / drop-ceiling / raised floor Works when pulling just one cable out of a mess of cables, or when pulling a new cable through to replace a broken cable. Note: Always use…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
In my two new floor level showers no strainers were installed in the drain gutters, so long hairs etc. periodically clogging the drain. The cleaning of the drain ist really no fun... The official strainer (google "Tece Haarsieb Drainline…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
My second approach for an easy to use and rarely to clean strainer for floor level shower drains. This time I replaced the original tube ("TECE Tauchrohr" see pictures) by an own designed one.The new tube is for the siphon-function in…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
4 inch inline duct fan cradle. For the AC Infinity Raxial fan. Screw holes for #6 pan head screws.
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
UPDATE 9/1/2025: Uploaded the V2 model and .gcode file.I installed the AD5M enclosure kit on my printer and the top loop of the PTFE tube was contacting the acrylic lid, so I shortened the height of the model another ~4mm to fit. I also…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Required hardware 12x M5x10mm bolts 12x M5 nuts 2x 608 bearings Assembly Instructions Insert 608 bearings in each half-rim. Insert all the bolts and nuts into the appropriate holes in each half rim. Insert tire into bottom half rim, then…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
Auch keine Lust mehr den Nachtischlampenschalter im Dunkeln zu suchen? Dann ist das hier für Dich! Kleiner Druck mit großer Wirkung. Zwei Clips halten das Kabel des Schalters links und rechts und der Schalter bleibt wo er sein soll.…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Holder for regular / standard size automotive blade fuse. I need to print it again so I took some time to I improve my previous remix. Shorter body, fuses can be inserted easier and as a bonus we can easily confirm if fuse is blown or…
This is an articulated model I sculpted of the creature from The Elder Scrolls Online, Tremorscale. A duneripper boss from one of the dungeons in the game (Volenfell). Support me on Ko-Fi! https://ko-fi.com/zunasw Printed on an Ender 3…
This is a model taken from the Elder Scrolls Online with some smoothing applied. This model is available as one whole piece which is 170 mm high, or split into parts that assemble into a statue about 40 cm (15.8 inches) high. The statue…
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
"Behold the Argonath, the Pillars of the Kings!" "Great power and majesty they still wore, the silent wardens of the long-vanished kingdom", J.R.R. Tolkien, in The Lord of The Rings These massive statues are one of the wonders we get to…
This is Eugeo's Blue Rose Sword 1:1 from anime "Sword Art Online: Alicization" with a Scabbard included. I made it in parts to be glued/welded together with an M8 threaded rod inside of it for extra rigidity. I printed in PLA with 15%…
This is a set of mini puzzle tanks inspired by Tanki Online during its golden years (2012–2015). The kit includes these classic combos: Hunter + Smoky Hornet + Railgun Viking + Thunder Each tank is designed as a flat kit-card: print it,…
I've gone through quite a few iterations of test ocarina's to arrive at this tone-accurate musical instrument that prints without support and without assembly in your resin printer. …and it looks like a butterfly cocoon as it hangs down…
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
This simple housing lets you mount your Wago 221-2411 nicely on a 2020 (or 3030) extrusion. No special printer settings are required, but I recommend ABS/ASA material, especially when you are working with a heated chamber. BoM: 1x housing…
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
This is a remix from MalinaPl beautiful Telecaster model https://www.thingiverse.com/thing:4056363 -- the only difference is it is scaled down to 25% and I have added a Thinline body (with f-hole). The guitar stand is modified and scaled…
An inline cage swimfeeder. Cage size is 41mm x 32mm diameter. Printed in PETG, 4 outer shells, 3 bottom/top layers, no supports, 100% infill. Print time is around 1.5 hours at 0.2mm layer height. A 4x18x35mm cavity is included for adding…
This is Kirito's Night Sky Sword from anime "Sword Art Online : Alicization" 1 : 1 scale. I made it in parts to be glued/welded together with an M8 threaded rod inside of it for extra rigidity. I printed in PLA with 25% infill which…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…
Model for mounting 3x WAGO 221-2411 Inline Connector to standard DIN rail. Best printed on side for strength.
This is the next version of 3D printer ventilation I've built for my 3D printer enclosures. The video shows how the ducting, ducting connectors and gates were installed. It also shows how I researched and designed an inline fan using PC…
This model is compatible with the lego system.
**Medium size fishing tackle box for inline spinning lures. ** Overall box size is approximately the same as Plano 3200 series boxes and it should hold up to 18 common types of inline spinning lures in sizes 0-5. I printed it on an Ender…
Do you need specific wall plug to attach your new large shelf on the wall? Toolshops are closed and you need to do it just right now? Don't worry, I developed online tool that allows you to customize, download and print your own wall plug…
I've printed this to use inline with my heated bed inorder to add an extra bit of protection for my custom printer. Print both parts add the crimped spade connectors and glue together with acetone. I've used 16AWG silicone wire inorder to…
I use this in a water removal vacuum device. Water is sucked off the floor into a bucket, the vacuum keeps the check valve closed. When the vacuum is turn off the bucket drains through the check valve. So it's not meant to be a perfect…
Overview Traveler, beware the crossroad - for HECATE draws near! The Hecate mod converts the Nerf Bigshock into a four-shot inline clip blaster that loads from the rear! This uses half-length short darts, and can achieve a performance of…
I had a small panel switch, used for inline in a wire. The switch clips into the sloped edges in the skin, holding it tight. Mode build123d code supplied for remix…
NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…
This is the Pact Dragonclaw Circlet from the game Elder Scrolls Online. https://elderscrolls.fandom.com/wiki/Pact\_Dragonclaw\_Circlet To be printed and worn on your head, or to decorate a shelf. It's designed to be printed without…
This project is a fully functional I5 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1‑2‑4‑5‑3, 🔩 Assembly Details The model is assembled…
My first completely original model! This is an Ikea Skadis mount for the Nintendo Switch Online Super Nintendo (SNES) or Super Famicom (SFC) bluetooth wireless controller. It will also work with the 8bitdo SN30 or SF30 bluetooth/2.4ghz…
This are all the sculpts and models I made for TESOctober 2021, posted on my Twitter here: https://twitter.com/ZunaSW They are all using prompts from Zenimax Online, and basing them on their creatures, thus the creature concept credits go…
Uploading all of the Caldari ship models I exported from Eve Online many years ago as a single package of all Caldari ships, from drones to capitals. Some are missing. Nothing has been sliced/modified for printing, just exported and…
This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the Thingiverse Thing, it helps alot! :) There is more info on the design in this video:…
Uploading all of the other ship models I exported from Eve Online many years ago as a single package ships, from drones to capitals. Some are missing. Includes: Pirate, Sisters of Eve, ORE ships. Nothing has been sliced/modified for…
Make friends and intimidate them with stupid-silly firepower why not? I've seen a few designs here and there for inline clips and I finally put a couple hours into my spiraled cylinder to get half darts stacked and firing. In brief: the…
Printed in PLA or something else you want.
Hi, Today I introduce you inline network waterproof connector which utilize standard keystone adapter. Items needed: 1x connector middle 2x connector cap 2xM20 gland 2x 1,5mm O-ring gasket (optional) 1x Keystone connector Assembly process…
These are all the sculpts I made for TESOctober 2022, of which I posted their renders in my Twitter page here: https://twitter.com/ZunaSW They are all using the prompts Zenimax Online Studios put up. I based my sculpts on their creatures.
A display stand for the 8BitDo SN30 or Nintendo Switch Online SNES controller. Includes dongle slots for SNES and USB. Also compatible with original SNES wired controllers. Purchase: Also available at kytor.com/store Recommended…
This is a print in place model, meaning there is no assembly required! See how it works: https://youtu.be/n4ovYJdgHNU Please like the Thingiverse Thing, it helps alot! :) There is more info on the design in this video:…
Moved pass through more inline with outlets. Angled 45 to give better flow to my taste. I'm very new to designing stuff so not perfect but works fine for me
For the original design I liked the compact size and how it is inline for making it a part of a vacuum (Genius), but wanted the CAD files so rebuilt it as best I could. Tried to simplify the geometry and maximize areas while thickening…
I made these three models for the TESOctober in the year 2020. It was all I did that year, and while they were not all the prompts, they were pretty neat to 3D print.
REQUIRES 4 PRINTED BEARINGS THAT ARE NOT INCLUDED IN THE STL LIST BELOW PLEASE PRINT 4 HERRINGBONE PLANETARY GEAR BY PRUSA RESEARCH FOUND IN MK3S SAMPLE OBJECTS ON PRINTABLES (or included on the sd that came with prusa printers) Print…
A 3 part model that, combined with some M20x1.5 Cable Glands and a snip of 1.75mm TPU filament, you can splice a 3 wire connection together and keep it dry. I recommend printing the inner piece with an exterior brim and the caps with an…
Uploading all of the Amarr ship models I exported from Eve Online many years ago as a single package of all Amarr ships, from drones to capitals. Some are missing. Nothing has been sliced/modified for printing, just exported and cleaned…
Uploading all of the Gallente ship models I exported from Eve Online many years ago as a single package of all Gallente ships, from drones to capitals. Some are missing. Nothing has been sliced/modified for printing, just exported and…
This is designed to display your Nintendo Switch Online edition SEGA Genesis Control Pad and a Genesis / Mega Drive Bluetooth adapter such as the 8BitDo Retro Receiver or the Retro-Bit Bluetooth Receiver . Printing: No supports needed.…
This is a box I designed as small as possible for an inline switch using a common switch. It uses 4-40 socket head bolts cut down to fit. Print instructions I printed it using ABS but PLA should be fine. My ABS settings where... Layer…
Small printable clip for WAGO 221 inline connectors. It allows you to clip two of them together. It prints with the U face touching the bed.
Model to hold 3x WAGO 221-2411 cable connectors and then to be screwed through fixing to base. Best printed on side.
Uploading all of the Minmatar ship models I exported from Eve Online many years ago as a single package of all Minmatar ships, from drones to capitals. Excluded are the Reaper and the Rifter as these are freely available elsewhere.…
4 Cylinder IC engine based on Inline/Straight configuration In order to Assemble it after 3d printing you need following items 1. M5 X 30 mm - 6 2. M2 X 20 mm - 8 3. M2 X 45 mm - 4 I also made a Youtube tutorial showing the process of…
Cable extensions 2-wire using the WAGO 221. Print in PETG, because it is more fire-resistant than ABS or PLA. Secure with M3 screws and nuts. Suggest screws are 14mm with a hex head. I like the box for wago221 inline connectors from…
I made this 3D model in 2018, for a friend, of his own argonian character from elder scrolls online.
Create 3D maps of your trails for free on TopoTrail.com by simply uploading one or more .gpx files. TopoTrail.com Features: 🌊 Automatic Coloring of Seas, Lakes, and Rivers 🏢 Includes buildings 🗂 Upload Multiple GPX Files on a Single Map 🟩…
This is a drop in replacement for the front end of the Rival Pilot. To install, put a 16x1.5mm o-ring (or any 1.5mm thick o-ring that fits) in the o-ring groove on the outside of the tube portion. Put this 3d-printed part inside the…
Inspired by the membrane clarinets created by Nicolas Bras. Designed so everything is inline like a traditional clarinet. Requires the use of o-rings to seal the membrane compartment. O-ring dimensions: Inner Diameter ¾" Outer Diameter…
Printing recommended (SLA)
I made this Kaalgrontiid back in 2019, to try out my resin 3D printer. It is a dragon from The Elder Scrolls Online Elsweyr chapter.
My first aggressive inline skate frame design. More about it on my website here .
inline fishing floats / bobbers useful for slip rigs you might need to use a drill bit or wire to clean the inside so the line can slip smoothly
Firstly, I used the connector end from PTFE Bowden Tube Connector , so credits to @firstgizmo for that portion. The main aspects of this, however, are completely unique. If you would like to support my efforts, buy me a beer . I want to…
I made this digital sculpt backn in 2018 when I was learning 3D. It is a daedroth from Elder Scrolls Online. It is actually a daedroth later on used in Beyond Skyrim Cyrodiil. I never got to print it, but I wanted to share it.
This is an adapter for connecting a 4 inch flexible duct to an AC Infinity CLOUDLINE LITE A6 6 inch inline fan . It serves the same function as this commercially available adapter . I coated the adapter with a resin clear coat to make it…
You will need 24 #6x1 Screws and 8 #6x1.5 Screws. I used Sheet Metal Screws with a Pan Head. @Menards Three (Part# 88244 Handi-Pack) ¼ x 2 Compression Springs @Menards Three (Part# 88252 Handi-Pack) ¼ x 1-1/16 Compression Springs @Menards…
Mount your WAGO inline 221 series lever nut connectors. The mount is designed to hold (3) side by side, which is useful for brushless motors. You can print the included clip, or use a zip tie to hold them down. Either option allows the…
Updated v2 Top Cover: Changed the voltage adjustment opening from a hole to a slot per feedback to allow for variance in manufacturing. Yet another remix of this box to fit my specific buck converter, but I also couldn't find one with the…
Long project remixed from unprintable https://www.thingiverse.com/thing:1525036 by JackSpectre to make printable on fairly large scale with minimal overhangs and no risks! Split in 2 for easy printing. Lower base mating face recessed…
3D model I sculpted of Kjalnar Tombskald from Elder Scrolls Online, commission ordered by zbzszzzt123 on Reddit. The head doesn't have any detail, as the original commissioner already had one they were using.
Diese Wandhalterung, ist zum aufhängen der Skates zwischen der 2. und 3. Rolle gedacht, dadurch berühren die Rollen nicht die Wand. Gedruckt mit PLA pro von Super-Filament.de, 20% Infill, ohne Support, mit einem Ender 3 S1.
My friend is driving an “Online Pista 125 R” and i designed that model as a birthday present. I like that kind of model, because it adds some nice and clean look to your room.
I've uploaded wheels in 45mm and 50mm diameter, bearing takers and straight to axle type. I recommend 45mm for most anti frames but let me know if you would like other sizes added. I've also added a fusion 360 file which has a template…
Compact Inline Belt Tensioner Created for 6mm GT2 belts. Tested at 35kgf. Good for integration into Z belted mounts or X carriage mounts. (see CAD files) Print -0.14mm layer height or lower, 100% infill -Arachne perimeters -Well tuned…
Coupler to join two 2.5" Ridgid hoses together.
Needed a simple filament sensor. I used the parts, I had laying around. Works well with hard materials (PLA/PETG/ASA/...) and with TPU. Not sure about more flexible materials. Endstop switch: https://bit.ly/3GQfsb2 Bowden coupler(1/8"):…
I made this digital sculpt in 2021, for a prompt Zenimax Online Studios made in their twitter in which the community could create any creature based in the world of Elder Scrolls, that could fit in Oblivion. This is what I came up with.
My remix of https://www.thingiverse.com/thing:4713483 . Hardware you will need. Listing McMaster-Carr parts #s will need one of these for the breech - Oil-Resistant Buna-N O-Ring 1/16 Fractional Width, Dash Number 012 9452K21 and 6 of…
Modified version of Ryan's inline filament sensor to use ECAS04 connectors. I didnt test this beyond checking the ECAS fit, so good luck. :) See Ryan's readme for all the credit.…
RJ45 Inline Coupler Keystone Case This thing is a 3d printable housing for an RJ45 keystone. The reason it was developed was so that I could mount my spare Cat5e coupler into my CNC case without having to change the case design too much.…
Information: The perfect bookmark for SAO lovers! Wanting to make your book collection POP with some fancy themed bookmarks? Try out some of my SAO designs! Example Print: Printed on an A1 mini and AMS lite using Bambu labs PLA…
Danke and Sandon der damals das OK zum upload gegeben hat: https://www.thingiverse.com/thing:2090893 Die Idee habe ich von YouTube. Will mich ja nicht mit fremden Federn schmücken: https://www.youtube.com search with: "3D printed…
A stylish pen holder inspired by the design of a 6-cylinder car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk…
This is a set of Cable splice jackets designed to be used with scotchcast cable jacketing resin for making inline tether splices for underwater vehicles or other electrical cable repairs. It's designed to fit the 8mm yellow blue robotics…
Extender for Stepperonline 17HSxx-xxxxS-PG27 It was hard for me to get the steppers from the BOM of the Keen-One EQ mount, I also had two 27:1 geared steppers from another project (Stepperonline 17HS13-0404S-PG27 0.4A/28.5mH) and I have…
I made a version with an extended ammo count referring to the cool pioneers' mods for the nerf big shock. We referenced the design of the existing mods a lot, but since most of them have been redesigned, please note that the main parts…
A simple remix of DodoRC's 4 piston print in place fidget toy but with 2 and 6 cylinders. Simple print in place design and ready to spin as soon as you get it off the build plate!
Changed geometry for helmets, arms and other parts that needs support. Weapons remains the same. Some troubles can occur in head area, please check your slicer settings. You can see it on my video here:
Slim cover for the nema23 motor from stepperonline. Use WAGO 221-2411 “Durchgangsverbinder mit Hebel” to connect wires. Use zipties as strain relief. I used it for my DIY CNC Maschine “ Volksfräse VF1 ” Du suchst einen…
