60 models
Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…
This is a remix of Jazzychad's passive drag feeder design updated to work with the LumenPnP V3. V3 changed the nozzle's z-height which makes it no longer able to reach the previous model's tape. This remix uses a spare 2020 aluminum…
I designed these PCB Holders and Feeder Strips to clip to the edge of the build plate on the Lumen PNP using 0.75" binder clips. This design allows for both the feeder and the PCB to be mounted anywhere on the build plate. It is only…
This design has worked well in some testing, but has not been fully vetted! Your mileage may vary across tape types and thicknesses.
Welcome OpenPnP Community to the PixiePlacer Wiki! The PixiePlacer is a DIY Pick and Place Machine for SMD Components based around the amazing software OpenPnP. The machine is designed to be low cost and suited towards mid-scale…
NOTE: This is for the V3 LumenPnP. If you're currently using V2, you'll just need to print a few additional parts which are listed below. This mod provides a minimalist set of parts for upgrading the LumenPnP X & Y axes from v-slot…
This feeder is designed to be set up as an Auto Feeder in OpenPNP. I designed it to mount to a Lumen PNP. It uses an Arduino Mega which listens to GCODE sent over a USB serial connection in Open PNP. The Max Feeder Shield can control up…
This is a collection of 3D-printable parts that can be added to a LumenPNP v3 pick-and-place machine to allow the use of Mark Maker's (makrzone) ReferencePushPullFeeder feeder. I've had very good success with these feeders and I really…
This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…
Based on the original design by Cor van Doorn. Opulo moved the cameras in Z between v2 and v3 machines. These tools provide reach to access the recessed Bottom Camera, and also allows for adjustment of the Top Camera when using my 4mm Top…
Update 2023-07-04: Added an “XL” version of these feeders that is 30mm longer. This allows you to use them close to the home position at 0,0. The gears on the normal length feeders sit directly beneath the nozzle homing position and can…
This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 8mm SMT strip. There is also a *.step file that can be extruded wider to accommodate wider tape. There is an optional slit in the top of the…
This is a flexible mounting system for pcbs/panels onto the LumenPnP pick&place machine. It's composed of a base mounting plate with fixed brackets for one pcb corner plus movable support sliders for the remaining pcb edges. A grid…
CHANGES FROM ORIGINAL: Added 16mm, 24mm, & 32mm Menlu Strip Feeders. Updated all feeders to work with EIC-481-C standard max component heights. STEP FILE instead of STL Update 8/4/2025: Added top camera compatible Menlu-EH (extra high &…
This design adds a simple SPST power switch for the Opulo LumenPnP Pick-and-Place machine. The switch mount attaches to the left side of the machine, and bolts to the 2020 extrusion on that side. Designed to utilize this switch:…
Based on the flange design by @qwertymodo, I modeled a press-fit model to more completely fill the bottom vision's field of view. It's 40mm in diameter, and best printed in ABS/ABS+ for its matte texture. I've printed in black so far with…
Printing Settings Layer Height 0.2mm PLA works great 15% Infill Supports recommended This model is updated after first print and shown on photo's.
It is the Menlu stripfeeder of @ERIK3DP_1763971 but remixed into the Opulo formfactor so for OpMenlu.. These feeders push the strip upwards clamping them down so components don't jump out. Compared to other strip feeders these are the…
I wanted to get rid of the overhanging cut tape strips at the front of my LumenPnP pick and place machine. I found two existing designs here but those did conflict with the LumenPnP feeder slot harness for the Photon Feeders of the recent…
To increase the rigidity of the LumenPnP (v3) toolhead, I decided to modify Stargirl's excellent linear rail mod ( https://www.printables.com/model/278803-lumenpnp-linear-rail-mods-v3 ) to support dual linear rails for the x-axis. This…
This is the original LumenPnP V3 nozzle rack model, modified to mount on the front rail of the machine. This improves stability, and reduces strain on the staging plate. The design is based off of that of @qwertymodo, which was for the…
Keep your components neatly coiled beneath your existing drag feeders with this minimal print. It inserts snugly into the M5 screwhole and requires no modifications to your feeders. Say goodbye to big loosely hanging coils of components!…
An accessory for the Opulo LumenPnP, this little bin magnetically attaches to the front edge of your staging plate to catch any parts Lumen decides to discard. The part is designed to press-fit “8x3mm”-nominal round magnets, but the parts…
An accessory for the Opulo LumenPnP, this bin for discarded components can be press-fitted to the front edge of the staging plate.
Printed using 0.2mm layers with PLA. Print the LumenFootBody upside-down. It should not need supports. Screw the jam nut all the way down the bolt, then insert the bolt into the body. Attach the body to the Lumen under the bottom…
Simple discard bin which is held in place by latching onto the screws used to mount the bottom camera. The bin only goes around the screws and can be easily removed without any tools.
LumenPnP's automatic feeders are a game changer. However, the reel holder didn’t play nice with the Mouser or Digikey reels I got. It didn't snugly fit as shown in their docs. So, here's a remix of that design with some handy…
I have a really small board 25mm x 25.4mm and needed some board clamps that didn't go under the board (reverse of what ships with the LumenPnP). So I made these for grabbing on to small boards. M3 through holes mounts on 30mm centers.…
Drag feeder that fits on the lumenpnp with reel holder
From original model (modified to reference 12mm): This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 12mm SMT strip. There is also a *.step file that can be extruded wider to accommodate…
I included the 3mf file too so you can open it up in Prusa Slicer and adjust the hole size for different bolts or inset sizes. From the original: LumenPnP's automatic feeders are a game changer. However, the reel holder didn’t play nice…
After installing Stargirl's awesome v3 linear rail upgrade and converting other parts of my machine to use the updated V3 LumenPnP parts, I found that the top camera lens was VERY close, if not touching, the nozzle rack. The nozzle rack…
This is a support that should be attached to the v-slot y-axis, making it possible to use longer strip feeders (or two strip feeders tagged along). I've designed a general model, and four specific variants that fits the blade teeth,…
The original spool mount of the feeders were too narrow for the spools I got, also they slipped out very easily when moving the feeder. This mount encloses the spool on both sides, preventing accidents when moving the feeder. The design…
These little vision shields can be press-fit onto standard CP40 pick-and-place nozzles to aid in machine vision. Tested and work perfectly on my Lumen PNP but likely to work with any other pick & place machines that use CP40 nozzles. To…
Cable Chain made for Index Pick and Place machine Print Settings Printer: Custom Rafts: No Supports: No Resolution: 200 Infill: 30 Filament: 3DEA PLA Black and blue Category: Other
Modified version of X-Gantry and Z-Toolheads from LumenPnP-STLs-v3.1.2 for 4-hole MGN12 linear rails.
This is a replacement for the two support center support legs for the LumenPNP. It replaces them with three 20x20 extrusions and a few standoffs. You will need M5 bolts and drop in T-nuts for the 20x20 extrusions.
This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…
I ran into the same problem that the top camera was very low. The spacer by @jm moves the camera up 4mm but i did not have M2,5 bolts that were 4mm longer. So instead i used some random M2 screws (they can be sourced from an old laptop or…
A circular discard cup that fits in the staging plate center holes.
Mount a smaller version of the LumenPnP's datum board, without moving the primary fiducial, to enable 3D calibration. This is second revision of this model, moving the secondary fiducial to OEM secondary fiducial location, removing the…
Pressfit bin for the lumenpnp machine
This simple plate is protecting your LumenPnP (Opulo) motherboard from electronic components that could fall down thru the holes in the staging plate and cause short circuits or other issues with the circuit. It's 100x100mm big and has…
PARTS LIST: Epomaker EK21 (I have no idea what the difference between the Zebra and Wisteria switches are, so good luck.) 3D Printed LumenPnP Jogpad Keys Optional: USB Extender , only needed if you're running out of USB ports like I was.…
Tray for allowing PnP of Pico Pi or Pico Pi W. I have had success with a N24 nozzle with a 500ms dwell during pick and place
OpenPnP Fiducial Riser Platforms to put OpenPnP fiducal targets on, 24mm and 34mm high.
Tray for allowing PnP of ESP32 VROOM.
This is a mount for the Framework printable case I used to attach it to my LumenPnP. It mounts on the lower left extrusion, right next to the the control unit, enabling easy cable routing. Printing To print, print two copies: one as-is,…
The original model used recessed markings that weren't thick enough to look good when I printed them, and the individual keys were only combined into complete caps in a 3MF file that contained everything. This remix changes the keycaps to…
A bin for discarded components that fits to the edge of the staging plate on the Opulo LumenPnP. This bin is designed to attach using the same size screws that some of the LumenPnP accessories use, which are M3 10mm long hex head screws.…
lightbox transistor printed with 10% 0,1mm nozzle 0,4 the white(negative of the impression) part of the lightbox, imade it 6mm wide, white is the best for contrast but i used grey and the effect was like a retro yellow effect more like a…
OpenPnP Component Scrap Recovery Box This 3D-printed part is designed for collecting and recovering unused or rejected components in OpenPnP pick-and-place systems. It helps keep the work area clean and improves operational efficiency by…
The LumenPnP pick-and-place machine comes with fixed length support legs for the 3mm thick FR4 build/staging plates. I found I could not get the plates completely level without some ability to adjust, so I designed this. It still needs…
I wanted to put my LumenPnP on this rolling desk that is only 23.5" inches deep. The soft pads of the feet just fit on the surface, but I wanted something to positively retain the PnP on the table in case it got bumped. The rear foot has…
This a CP40 tool holder for LumenPnP/OpenPnP based on this work: https://github.com/richardklingler/openpnp/tree/master/openscad/toolchanger I've combined all the layers so that can be easily printed with a single material. Printed with…
OpenPnP Component Scrap Recovery Box This 3D-printed part is designed for collecting and recovering unused or rejected components in OpenPnP pick-and-place systems. It helps keep the work area clean and improves operational efficiency by…
Tray for allowing PnP of Pico Pi or Pico Pi W. I have had success with a N24 nozzle with a 500ms dwell during pick and place
Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…
