Counting matching models…
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Vytvoril som pauzy pre výmeny filamentu v jednotlivých výškach terénu. Použite filamenty od zelenej, cez žltú, červenú, až po hnedú. Alebo si tie zmeny farieb odstráňte a vytlačte si to v jednej farbe. Je to na vás :)
This is a 130mm x 97mm x 20mm tray with dividers to fit 5 Lansky sharpening hones.
This is an add-on for a Lansky sharpening system. It is a 2 part design handle that makes it easier to hold onto the clamp while sharpening a blade. The original was a 1 part handle which I remixed in Fusion360. It now also has…
Slovensko - podložka pre 8 krajov. Poskladajte si celé Slovensko zo všetkých krajov a umiestnite ich do tejto podložky. Vhodné ako učebná pomôcka. Jednotlivé modely (kraje) neobsahujú nápisy (môže to slúžiť ako slepá mapa). Verzia s…
Smyslem projektu je ukázat, že v některých úlohách školské matematiky se neobejdeme bez skutečného 3D objektu a že takové objekty si může každý vytisknout sám - Platónská tělesa.
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
This is a bust of Ukrainian president Volodymyr Zelenskyy in combat gear, who has shown his outstanding leadership skills, resolve and courage during the ongoing Russian invasion of Ukraine. #StandWithUkraine
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
UPDATE 12/6/24: HW kits and completed blasters now available through GTCCreation . UPDATE 2/25/24: Updated flywheel cage with tighter motor slots (thanks to Chance for the dimensions) to improve dart accuracy and reduce barrel strikes.…
Overview Complete design of Ugrinsky Vertical Wind Turbine Generator. The Ugrinsky Wind Turbine is a vertical-axis wind turbine designed for strong low-speed performance and reliable torque. One of its standout features is its low startup…
I found this Ugrinsky style windmill on thingiverse (Yuck! I know…) but I didnt find the parts supplied that useful apart from the blade design, which is awesome. I made some simple brackets and other printed parts needed to experiment…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
Modèle de la pyramide de Sierpinski, modélisé par moi-même. Model of the Sierpinski pyramid, modeled by myself. Instagram: @roiku3d
Ugrinsky Wind turbine optimized with a little Helix! It don't need much wind force to spin. Approx Ø190 - Height 168mm - Bore Ø5,6 There are much ways out there to scale it if you want! Very easy printable! Vase mode with 15x 0,2mm bottom…
magnifique sculpture éléphant a la Richard Orlinski
This is a vase designed out of pure Golden Rhombi discovered by Stanko Bilinski. I remixed this vase from: http://demonstrations.wolfram.com/OctahedralVase/
No special print settings or supports are required. Happy Halloween and bon appetite . 👻
The original file takes 36 hours to print. This only takes 6 hrs. .1 layer height .6mm nozzle You can modify the .3mf file if you have a .4 nozzle.
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- UPDATE | 11/16/2024: "Lansky_Large Base.stl" file uploaded…
three variants of the clown nose 1 - with a classic hole on the side for attaching a rubber band 2 - with a hidden rubber band attachment inside the nose 3 - a prototype that holds itself by anchoring into the nostrils, yum (if you have…
Added some more print surface to the tips of the blades so that it won't warp during print. These things are probably best printed in ASA, so that it's UV resistant.
Tento monumentální model inspirovaný legendárním King Kongem zachycuje syrovou sílu a divokost ikonického titána. Masivní gorilí tělo s přehnanou muskulaturou, otevřenou tlamou a dynamickým bojovým postojem působí, jako by se chystal…
Carpenters knot also known as Zimmermannsknoten is a set of 6 interlocking parts originally designed by Japanese carpenters to securely fuse the intersecting wood structures when building rooftops. Building these knots is complex and has…
Thanks to vladua for the great wind turbine. https://www.thingiverse.com/thing:3627007 I wanted to have the bearing completely below the wind turbine. To do this, I enlarged the bars at the top and bottom and added 8 mm holes. I added a…
A bold and expressive bust inspired by the resilience and strength of Ukraine’s president. This stylized model captures his determined look and calm resolve—an emblem of modern leadership and courage. Great for collectors of political…
I ordered a new Lansky knife sharpening kit after having coveted my uncles for years and found that it didn't come with a base or a stand of any type. Rather than order a base and wait a few more days to finally get my knives out of their…
sculpture imaginée par le plasticien français Richard Orlinski, sur une idée de Christian Estrosi et Pirelli. sculpture imagined by the French visual artist Richard Orlinski, based on an idea by Christian Estrosi and Pirelli.
Holger Danske , also known as Ogier the Dane, is a legendary figure deeply rooted in Danish folklore and medieval European literature. Often depicted as a noble knight, Holger Danske embodies the spirit of patriotism and heroism in Danish…
These themed straw markers can be printed quickly and easily without supports and special settings. The choice of colours is up to everyone's imagination, just bear in mind that each straw may have a different diameter, so you need to…
Scanned bust of Jan Amos Komensky - John Amos Comenius - THE TEACHER OF NATIONS, THE TEACHER OF TEACHERS
Use 15% - 25% infill. No support needed.
This is a model of the Sint-Janskathedraal (St. John's Cathedral) in 's-Hertogenbosch, Netherlands. At the moment two models are available: One model with the interior One solid model Note : this is work in progress. I did not yet print…
A simple base for the awesome Spiral Vase Mode Sierpinski Pyramid . Makes the bottom of the pyramid more opaque, enhancing the effect when you pick it up and inspect it. Otherwise the bottom is quite translucent (and somewhat fragile)…
Valentínske srdce zložené z dvoch častí. Aby jemu/jej pripomínalo v čase odlúčenia, že niekde je jeho druhá polka, ktorá čaká na vzájomné spojenie.
IMPORTANT!! Download the “ .txt ” file and change it to “ .cxprofile ” Now go to your Creality Slicer, on the right side import your Profile (at Parameter config). Import your Nat Sierpinski Model and select your Filament. Thats all.
Slicer settings I used for each medal: The star medal was printed using bronze filament with default 0,05mm layer height settings The medal ribbon was printed with 0,2mm layer height with 2 color changes, starting with red filament, print…
Model ready for three-color printing. Just set the filament change at the right moment in the slicer. If you need to scale the model, scale it up in the X and Y axes only. I don't recommend scaling the model down, as details that are too…
We needed a holder for the communion candle from our son we saw some online but i thought “hey, i can print that on my own” i found no design that i liked, so i made one on my own it is designed to fit 40mm candles but you can scale it to…
A heavily revised version of the Stringer Mega Masterkey by Bruce LeedleLeedleLeedleLee that is specifically designed and tailor fit to act as an underbarrel attachment for the NSK-X blaster. This has a special grip portion that sits…
Just another remix, as one piece and with color change for the bust. Gcode is printed with 15% infill (support cubic), with support and with color change for the bust. #standwithukraine
Der Druck erfolgte mit einem speziellen Marmor-PLA , das durch seine weißen Grundtöne mit dunklen Einschlüssen besonders edel wirkt und die Figur wie aus echter Steinmasse wirken lässt. Druckdetails: Material: Marmor-PLA Layerhöhe:…
A simple stand for the sierpinsky pyramid. The model was quickly made with Blender. (www.blender.org) Included is the initial version and one with less material usage (Infill modified) as 3mf. Feel free to change the Infill to whatever…
This vertical wind turbine is even more garden related as it uses ¾" wheelbarrow bearings to keep it spinning nicely. To keep the helical shape printing nicely without supports each segment covers 30 degrees. You need to print three…
Printed 0.3 layer height 20% Infill No supports Tip: To hang, use two loops of string, connected to each other. This will stop the ornament from turning sideways.
A small multicolored Halloween keychain or bag pendant. Just for fun. :-)
Small container that fits on the IKEA Myllra changing table and Myllra bed, to keep commonly used products close by. Water tight, so can be used for washing too. I ended up with multiple, they're very useful especially since IKEA's own…
This is something I whipped up in Inventor Fusion this morning, and I like it. The 2 smaller versions are likely the only ones that are possible, so if you try the huge one and it fails, that's your fault :P I'd try to make the large one…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
Dieser kleine Skelett-Kumpel ist frisch aus dem 3D-Drucker geschlüpft und darf jetzt die Vitrine unsicher machen. Gedruckt habe ich ihn in PLA. seitliche liegend.
unterstützt einen kleinen creator :)
Шо тут ще скажеш (What else there is to say)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This contains the Openscad code you can use to create 3D Sierpinski gaskets to whatever level of detail you desire
A simple, fast and effective way to align and center the assembly of the sharpening stones of this system
This cookie cutter attempts to take us one step closer to infinite cookie edges through the use of fractal technology. I have included two size variations, one large cookie size (~95mm) and normal cookie (~77mm) sized cookie cutter and…
Roztomilá halloweenská příšerka ve stylu labubu holčičky sedící s mašlí
Custom mount for my Lansky knife sharpening system that came without one. Max table thickness is 50mm (2in). Separated into 3 parts: Clamp base, clamping screw and sharpener mount. STEP file included in case you want to modify my design.
Doplňky pro dílenskou nástavbu V3s 1:43 Od @KRtekTM_46390 Skříň na Praga V3S (Degostini, 1:43)
Model vytvořený ve FreeCADu s náhodným kamenným obložením.
Vierkant Schlüssel für Revionsklappen
Jedná se o návrh a výrobu malého dílenského svěráku, podobného typu jako nabízí výrobce svěráků YORK.
I couldn't get Bill Owens wonderful program to work for order 6, so I modified it. It now works for an order 6 300mm Sierpinski Tetrahedron. added more support for order 6 changed how "stick" was used to not shift the tetrahedron; so that…
This is the official fixed stock for the NSK-X Foam Dart Blaster . It is the same length-of-pull as the collapsible stock and only necessitates the replacement of 3 parts on the blaster. It has an integral battery compartment that is…
To learn more about the Menger Sponge, please visit https://en.wikipedia.org/wiki/Menger_sponge
Hello everyone, I love modeling different colored cakes, so I modeled a Homer Simpson with a Valentine heart for you. If you would like more cake toppers, you can contact me. If you would like to legally sell my models with a commercial…
Make your own hones or strops for your Lansky® controlled angle sharpening system. I wanted a strop faster than I could get one so I made a handle that will suit the Lansky® sharpener I have. While doing it I realised you could make grits…
I liked the original design, but I figured if I were to make more or to upscale the part that I'd like to split it into two parts. The original design's panel is ingenious; you print it flat but bend it into shape. I unitized this into…
Monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Twelve different poses. Blender is able to import animation files for most models from this game, so more poses are possible if…
Parieasaur featured in Walking With Monsters.
This is version 2 of my custom electrical wire fastener/clip. I've added a countersink to support an additional type of screw while leaving a large flat area for the ¾" #8 lath screws I'm using. The large flat head screws are ideal for…
Ein paar Bausteine, um an fischertechnik Modellen im 15mm Raster Kabelinstallationen verlegen zu können.
I needed an additional handle for my Lansky knife sharpening system. Buying is expensive - printing is fun! So here is a printable handle that can be used e.g. for attaching a piece of leather. Disclaimer: This work by blecheimer is…
toto je halloweenská vrána která může složit jako dekorace nebo dárek
Remixed to fit the 50mm height version of the pyramid and added a lip to retain the pyramid. Want to support my work for free? Check out Amazon for your hobby supplies (as an affiliate, I earn a small commission if you buy from Amazon,…
Hegemony Skilled/Unskilled Meeple Skilled Meeple: (28mm) Grey x12 White x6 Orange x 6 Blue x 6 Purple x6 UnSkilled Meeple: (22mm) Grey x22 White x5 Orange x 5 Blue x 5 Purple x5
A convenient station to hold a blade holder / angle guide jig and 6 stones from a Gatco (Lansky-style) sharpening kit . The jig is securely held but easily removed and flipped 180º for switching from side to side. Recommend printing the…
The first version has 45 angel, which might be a bit too much for some. There is a clamp with 35 angle (from vertical level) as well. Bottom_35 has also improved blade holding power via pivoting point Category: Hand Tools
Powered by Image-to-3D from MakerWorld (httpsmakerworld.commakerlabimageTo3d)
OpenSCAD model of a Sierpiński Tetrahedron, inverted, and 3D-printable without supports! Out of four prints, I've had one break during printing, when using a 0.1mm layer height, which was likely just poor clearance and maybe a bit of…
For FDM print bust only need support bottom and Ears
This model represents a level four iteration of the Sierpinski Octahedron fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
Based upon the method devlopped by agDesign for his Koch Snowflake (https://www.printables.com/fr/model/687221-koch-snowflake-christmas-ornament). I automated the method and provided the code here:…
I love my Lansky sharpener set, but I hate having to pry out each part from their provided case and assemble each stone every time I want to use it. Besides, the factory case doesn't provide a place for other accessories such as their…
I made a shorter base for Volodymyr Zelenskyy Bust. Just took the upper half and added a plinth at the bottom. Be sure to scale it properly before printing. #StandWithUkraine #stopWar
https://www.hi3d.ai/share/realistic-stylized-futuristic-female-hero-3d-model--5217a21e4b5341b297de3ad3d940a1e2?inviteCode=Y8Axoeva9P&shareType=history_model
After I tried to print the mount of Ofek256 I had my problems, so i created my own version. It is still rough around the edges but works for me.
Roztomilá soška ducha s dýní na hlavě
This base can be fixed with screws and also by means a g-clamp
For English please visit: https://wiki.permejdal.dk/TRÅDFRI_wall_switch Hvis du ønsker at købe delene, se: https://wiki.permejdal.dk/ZigBee_til_FUGA_kontakter For hjælp, se den tilhørende Facebook gruppe:…
Dansk Postkasse (Danish mailbox) There is both a 100% version that you can assemble and glue yourself, and a 50% version that can be printed as a single piece.
