Counting matching models…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. 8x6mm Magnets are strategically placed at both the front and back ends…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
PLEASE READ THE PRINT INSTRUCTIONS! TRIM IT AND DON‘T GIVE BAD RATING JUST BECAUSE YOU CAN‘T READ INSTRUCTIONS! After printing i cut the front of the shaper to make the tip a little bit more stiff and when cutting it angled it will be…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
The CIUNCARELLO Voronoi has a distinctive Voronoi design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
This paintball marker stand was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, screw the ASA adapter snugly into the marker, try to make one of the fins on the ASA…
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
CIUNCARELLO Voronoi boats a distinctive design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
This paintball marker wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, mount the wall mount to the wall using drywall anchors (use the screw holes in the…
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for PETGSource material: PET
This is a paint brush holder based on the blanks provided by CabbitCastle in his Wargaming Paint Bottle Holder. I based it on the 4x width version as you can then fit 3 5x's with paint and then the paint brush holder on the 76cm version…
Print approx. €3.44–€4.20 excl. taxPreliminary estimate for one variant
This paintball marker setup wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA and then do the following: Mount the large tank holder to the wall using drywall…
Print approx. €20.57–€25.14 excl. taxPreliminary estimate for one variant
Simple hexagon printbed scraper with no sharp edges and it is only 20 min print. You can also hang it somewhere :)
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is the ASA adapter that works with my Paintball Marker Stand and Paintball Marker Wall Mount. Marker Stand: https://www.printables.com/model/244651-paintball-marker-stand Marker Wall Mount:…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Target tips: try print in multicolour
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Love my BunkerKings CTRL loader for paintball, but spacing between the button on the shell and the board made it harder to press. I designed this small spacer to fit inside the shell membrane and it activates the board power much easier.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
18.5 mm throat to drop paintballs correctly .Made for Spider paintball marker. Print in ABS or PETg for strength. I tried TPU but didn't mount it to try.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Printbed Scraper that uses a 85x54mm plastic card. The plastic card can be replaced without tools and both sides can be used. The advantage is that the plastic card is harder then printed structures but soft enough to make sure there is…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
Printbed scraper
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Printed at 240 nozzle for better fusion and 2-% infill
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
I really like the Prusa spatula for its aesthetics and low filament consumption, but it could still be better. Enter the Prusa printbed scraper 2.0. I've reduced the material even more by cutting out triangular sections in the handle and…
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
Thissimple mod replaces the top part / lid of yesimjess' Paintbrush cleaner. I found the screw-mechanism quite timeconsuming. So I replaced it with a leaf spring and push button assembly. No additional hardware is needed for assembly. The…
This paintbrush holder has 22 slots for paintbrushes with 9-10mm diameter handles. There are also 2 larger slots for larger paintbrushes or other painting tools/accessories. The shelves can simply be slid into place, please ensure the…
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
A paintbrush holder for stopping paintbrushes from marking or rolling off the table. It is customisable so you can play with the dimensions and also the number of paintbrushes that it can hold. You can see more details here Instructions…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
Got tired of laying my paintball gun across the table when I'd go paintballing. Instead of taking the standard route and making one of out of PVC, I designed and 3D printed some. Pads are printed in Ninjaflex/TPU. There is a 200mm version…
Here we have a single filament box, it also fits the large spools from Prusa and Nobufil with a width of 70mm. I only have the spool holder as a construction here, how the filament is guided out of the box is up to you. reservoir:…
Imagine: In a single thoughtless moment, your brush, once laden with pristine white paint, is dipped into the murky waters of the rinse cup- staining the purity with the lingering remnants of colors past. The once-vibrant white morphs…
I remixed the HexScraper - Printbed scraper from visle to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want to…
I wanted to store the Hex-Scraper on my Mini but it was to wide to fit without interfering with the filament hose. So I remixed this smaller version. The hook I used can be found here:…
Printbed scraper Printing instructions: 0,15 mm layer height 3 perimeters Recommended material: PETG
Both models feature a perfectly placed opening allowing you to see which perfume you currently have in the case. For the ‘’Spray Case'' you simply have to drop in the vial and turn it 90 degrees to use it. It also features a locking…
I could not find a scraper sporting a voronoi pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
A 3d printable trombone. Fully parameterized in OpenSCAD, see https://github.com/pieterbos/PrintBone and check the wiki there for instructions on creating your own trombone design. See http://www.thingiverse.com/thing:2252952 for an…
Paint brush holder designed to be used with the Gridfinity system it fits over 100 brushes into a 4x4
Paintbrush holder for the Gridfinity organization system. 14 Slots. Tolerances on the Columns are pretty tight so if you need to, shrink it down by 0.1mm or 0.2mm but for me a little persuasion with a rubber mallet sufficed. Would…
Blender file included. For quickest and most economical printing, set wall count to 1 and 0% infill.
A Paintbrush holder with individual places for up to 84 brushes or pens with a maximum shaft diameter of 10mm. Upper supports at 80, 100 and 120mm height. The individual brush slots will likely not need supports. They're exactly the size…
Printbed Scraper for scraping off 3-D model remains
Hier findet Ihr meine STL Files zu meiner Lösung der Filamentaufbewahrung. Meine Erfahrung ist, dass es mit Kunststoffspulen am besten klappt und mit Kartonrollen wird das Abwickeln schwerer weil der Karton in der Box die Wand berühren…
Print two identical or mirror the second one.
For holding paintbrushes and/ or coloured pencils, e.g. aquarelle etc. in an art studio. The holes for the brushes/ pencils are 7.5mm in diameter in the base and those in the upper shelves are 9mm. There is a front tray (Width: 215mm x…
THIS IS NOT A PRINT MODEL This model is intended to be set as a print bed model in Prusa Slicer. It does not include a texture. Category: 3D Printers
This is a remix of Jewelry Holder made especially for necklaces. Please do first appreciate and like the original model from the author of this stand ( @DanielSchenk_545468 ) then you can like my! I strongly recommend using the .3mf file…
A scraper to clean the print bed of your printer with a modular blade, so it can be replaced when washed off! Changelog V2 improves dove tail (non retro-compatible) and adds hexagon pattern on the joint. V1 first version with a dove tail…
Model has same height with orijinal bed spacer so you dont need to calibrate your bed again. You can use it in 3 corners if you want. Im using in 2 corners to easily align the Magnetic Printbed Note : Print it with at least PETG with…
My suggestion as a mechanical engeneer for a printbed scraper. Ergonomic position for the finger (fingerprint). Satisfactory grip size. Special slot for nailing. It prints in 1h 35m.
Printbed scraper Printing instructions: 0,15 mm layer height Recommended material: PETG
A simple paintbrush holder to keep them organized.
Hot bed spatula that does not scratch the surface. Espátula para cama caliente que no ralla la superficie.
This is a modified version of the Paintbrush Holder provided by Tinker. I made modifications to the part to ensure compatibility with the Universal Hook. In addition to printing the top and bottom parts of the paintbrush holder, you will…
Paintball Bullet cal. 68 (17,3mm) Paintball Kugel cal. 68
Designed to be print in place. Works with most modern markers and pumps with 68ci or larger tanks. Print in PETG with 3-4 walls and 30% infill. Print with the ‘M’ shaped barrel rest facing up. Supports can be used under the base, but it…
The 3D printed file is a custom attachment designed to connect a Paintball tank to an Oculus Quest 1/2 controller, allowing players to fully immerse themselves in the game Snapshot VR. The attachment is specifically designed to fit…
Print at 104% because I forgot about the shrinkage
Dummy 13 Paintball Gun and Mask The living room became an all-out battlefield as the paintball match started. On one side of the couch fort, the silver team, strategized behind a pile of books and snack boxes. Across the room, the red…
This a remixed version of the PRINTBED_GUIDE for Elegoo Neptune 3 pro by user 'x'. x's version works well but clashes with Bobbylebob's scrap bin (https://www.printables.com/model/456408-elegoo-neptune-3-pro-scrap-bin). My model is a…
Feel free to remix it - scale or whatever you like. If you have special wishes, contact me and I do one for you :) Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds…
A simple brush holder compatible with Ikea Skadis. It is composed of an upper and a lower part, that together keep brushes separated and organized. No supports needed. Be mindful when pushing the pegs into the holes of the Skadis board,…
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
This is something I always thought should already exist, but I've never been able to find anywhere. So I finally got around to making it myself. The idea is really simple: I wanted a travel container for my brushes that doubled as a paint…
Tiny and simple paintbrush holder. Very easy to print, can be printed on every 3d printer. I uploaded 4 versions: V1: print 10 minutes V2 print 5 minutes V3 print 1 minute only (deleted) V4 print 3 minutes RECOMMENDED Print settings: (v2)…
The PrintBone, a 3D printed trombone. Now in 7 inch bell version with 12mm bore slide. Designed with the help of acoustic modelling software. Comes with carbon fiber slide, complete with PLA stockings. Also available in large bore version…
A raspberrypi camera printbed holder/mount for the Prusa Mini! Features: Fixable ball-joint for the camera (12mm M3 Screw). Friction-only designs kept getting loose. Easy installation to the Prusa Mini bed Optional cable-chain attachment…
Hardware -20mm long M3 bolts https://amzn.to/3HwKVkT https://amzn.to/3SxeR6B -M3 nuts https://amzn.to/42biS3T https://amzn.to/48P1eWb -pen spring (4mm x ~20mm) https://amzn.to/3vQHC5g https://amzn.to/3OiGPAv -Spring wire coil…
Slice it however you like – scale up or down! The lid is simply friction-fit. The original size should fit on a 200mm bed. All walls, tops, and bottoms are 0.8mm thick. Maybe try a 0.8mm nozzle for a fast print!
Mother needed a paintbrush holder to use with in-use brushes while watercolor painting. She liked it so maybe you do too :) I'm pretty sure you can print this in any way you want. I used 15% infill and 0.12mm layer height.
Paintbrush holder I designed in Tinkercad because I didn't like any of the designs I found online. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Any Any Any…
Print in place 1x1x1 gridfinity module designed to hold the rubber handles of the Army Painter miniature files neatly. Should work for most needle style files. To test before printing, make sure your objects fit snugly in a 6x33mm hole.…
A ½" NPS threaded cap for HPA and CO2 tank regulators used in paintball and airsoft. Includes storage spot for 2-015 o-rings. Printed upside down (oring storage facing build plate) with no supports, but supports may yield better results…
These are two containers to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in. They are specialy made because my printbed (235x235) was to small for the other containers i found, so i just jumped…
malá ale zároveň robustní oboustranná škrabka, sklon 45 stupňů
Soporte de pared para organizar en pared marcadoras de paintball y airsoft
Karambit špachtle Printbed scraper
Adaptor to change the 80mm Dia to one which can be between the zipper. Fusion360 files included.
Golden medal for the MVP (most valuable player) paintballer of the day, which also works as a key chain. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: any PLA 2…
Von außen nach innen werden die Haltelöcher kleiner, also feine Pinsel nach innen, gedruckt mit Harz, da FDM Drucke oft nicht wasserdicht sind und der Halter aus >Harz auch schwerer ist. Die Größe passt auf einen Anycubic Photon M3 viel…
Clean and neat stand for artwork brushes. All three pieces snap snug together. I recommend printing all parts face down for a nicer top finnish, and using some kind of supports for the frame part. I used PLA and all worked fine, accept…
A friend of mine paints my models and needed something other than, according to her, ‘a lousy cup like a neanderthal’ (apologies to those who use a cup lol). Pillars were given slight tolerance to press fit. Glue if you wish of course.…
Easy to print paintbrush holders that do a decent job of aligning and retaining small paintbrushes.
Filament-Trockenbox mit Silikat-Behälter und Etikett Die neueste Version der beliebten Filament-Trockenbox ist jetzt zum Download verfügbar. Diese ist in Gelb hervorgehoben, während die anderen Bilder noch die erste Version zeigen. Die…
APS CAM870 mk2 shell with standard depth. There is also a 30mm and 40mm depth version in the files section. Test cycled 20 times and no degradation on the PETG. Print with your highest temp to strengthen the bonding between layers. The…
Version 2: Added small nibs for both inner and outer rings. Grabs the cardboard even better. Also changed the curve design near the hub just for better looks. I've kept the original version for you to choose. Printed in PLA works just…
CIUNCARELLO boats a distinctive design and features that sets it apart from conventional bed scrapers, making it the ULTIMATE Accessory for your 3D Printing needs. Upgraded to fit almost any magnet lying around the house (16mm or smaller)…
I like printing with lots of colors, but I don't always want to buy whole 1kg spools, so I designed a spool holder/adapter to fit Printbed's mini spools so that I can use them in my AMS. I designed a solid version and a hex version, which…
Umarex HDP 50 Picatinny rail adapter Gun needs to be disassembled to be able to change the slider mechanism. 0.4mm nozzle - 0.2mm layer height 100% infill for the slider mechanism for max strength (use the same print orientation as shown…
I remixed the Closet to fit my Ender 3S1-Pro. It is still a tight print, but it works.
Introducing: the G.5 ( Gee Point Five) Pump Paintball Hinge Frame ! The first half of a competition worthy fully 3d printed paintball marker! Let's kick off this paintball gear evolution! This description is a work in progress. Also stay…
This model is compatible with the lego system.
Holds 2 scrapers under 2mm thickness
Easy to print scraper with 2 pattern variations.
Handy when your busy with house remodeling. Handheld paint and paintbrush holder. Can also be used with small roller (10cm). Be sure to print it with enough walls to make it liquideproof. For paints based on solvants must be printed with…
A small colour mixing tray for acrylic paints, airtight sealable and with integrated hinge. It is important to make sure that the hinge is not connected to the other half when slicing, in this case you have to play with the outlines and…
An adjustable butt-stock for 13ci PCP air bottles for magfed paintball markers. This has a tightening position. You will need to adapt the tightening clasp and provide your own nut/bolt to your requirement.
![Voronoi Printbed Scraper [2]](https://media.printables.com/media/prints/737744/images/5773832_b62f57bf-6e42-4f06-af0f-67f52c85ea62_ce7a15aa-4964-4e9a-b562-6ddfb82c2e02/img_1036.jpeg)
![Voronoi Printbed Scraper [1]](https://media.printables.com/media/prints/737707/images/5772672_ef8c4e62-fc12-4c5e-bcb5-0f7a36c450e2_6bd86078-9676-4171-8e9c-10e79ac52952/dsc01584.jpg)
![[Print in place] Paintbox](https://media.printables.com/media/prints/502059/images/4231352_43574b30-a075-48b7-b646-80b213bd2693/img_5543.jpg)
