Counting matching models…
This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple rack for 2x Raspberry Pi 5 with N04/05 NVMe Hat from GeekPi. You need 4x M2.5 screws to mount the frame. You can print colored frames to have color coding to identify the Pis. The first frame insertion will be tight,…
Print approx. €5.77–€7.06 excl. taxPreliminary estimate for one variant
Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for PETGSource material: PET
First of all, thank you for clicking on and maybe printing my model :D Pi 5 case, following the design of my Pi 4 case . The top and mid-frame remain unchanged. For FDM printing i recommend PLA or some other stiff fillament. !!! Official…
I really like pyrho's snap fit case, but my NVMe HAT wouldn't fit, so I decided to remix it. I remixed the original model to fit the 52pi N04 M.2 2280 PCIe To NVMe HAT specifically, but other HATs can fit in the case fine as long as you…
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…
juggling around with nvme 2280 sticks, i needed one box for storage. here a first attempt for 7 cards. 4 clips hold it closed, easily openable, fits cards without squeezing them. since i have only cards without heat spreaders, i designed…
A simple case to hold a single NVMe drive. My printing settings Material: PLA Nozzle: 0.6mm Layer height: 0.35mm Infill: 15% (doesn't really matter)
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
Needed a bracket holder for my NVMe M.2 on the Asus x99 Deluxe motherboard. Downloaded https://www.thingiverse.com/thing:2166807 and modified a bit. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution:…
Higher case to fit Geekworm X1001 NVMe Hat I guess it can fit other hats too given they're similar in hight to the NVMe hat.
Next revision of the nvme 2280 storage box
A tool-less case for a Raspberry Pi 5 with the Pimoroni NVMe SSD adaptor base. It's also designed for the OEM Pi active cooler. Assemble the Pi / Adaptor / SSD as per the Pimoroni instructions with the stand offs and 8 screws that came…
Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ ****************************************************************************************** **Update 21Nov24** There was a small blemish discovered to the button recess. This has now been…
Compact Raspebbry pi 5 case compatible with top mounted NVME hat (the one i used : Geekworm-Bouclier SSD NVMe pour Raspberry Pi 5, Tourists 2280, X1004, ne prend pas en charge le démarrage du SSD NVcloser - AliExpress 7 ) I printed it in…
This is tool-less case designed to accommodate a Raspberry Pi5 with active cooler and a Pineberry HatDrive! bottom . Happy printing and assembly :) UPDATE : 1/20/2024 - added various top case options UPDATE: 1/22/2024 Change the power…
2x1 size gridfinity bin with cutouts for M.2 drives up to size 2280. Height is 3 units
This is a tool-less case designed to accommodate a Raspberry Pi5 with active cooler and a Pineberry Pi HatDrive! Bottom . In addition to the original Raspberry Pi 5 with NVMe hat tool-less case , this remix includes four legs at the…
This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports. I added a revised model name…
Two versions are included, a “Simple” one which is simply the case and a “Mounted” one which allows to.. mount the Pi on something using taper 3x6 screws (I used wood screws to mount it to the side of my Lack enclosure). The “Simple”…
Storage for NVME drives. Recommend 100% infill since walls are thinner anyway. Also, slower speeds will result in near to no artifacts in the drive channels on each side.
UPDATE: I've added an alternate lower case without the nubs to accomodate slightly different adapter PCB's like the one linked in @markj 's comment. Also check you install the adapter the right way up… the adapter should have all the…
Do you have a dead SSD and an unshatterable ego? Then look no further, print this, superglue the two sides together, and attach it to your bag, purse, keys or anything you desire! Originally created cause I thought M.2 SSDs kinda looked…
New Model: Raspberry Pi 5 Case for Pimoroni NVMe SSD
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Quick simple print to hold 4x m.2 NVME 2230 and 4x NVME 2280 SSD. If you download the print and make one, please leave a rating a review and a photo. I love seeing others enjoy my designs. Thanks
From the original creator: This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch. The case…
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
Finaly Raspberry version with proper NVMe disks support:) So i have decided to build simple NAS with two mirrored NVMe disks and openmediavault software. Disks are installed in Pimoroni NVMe Base Duo for Raspberry Pi 5. I have bought…
I have a 2230 M2 SSD and needed to intall it on a 2280 slot.
Update 18Sept'24 : new lid design with the GPIO break-out increased in size so that a 40pin cable with its connectors can easily fit thru the slot. Although somewhat based upon a previous Raspberry Pi 5 snap-fit model (see here ) this new…
I saw this Fractal case on LevelOne Techs podcast. Fractal are not making it and after seeing a 3D printed one that TechX made (https://www.printables.com/model/910464-tiny-pc-raspberry-pi-5-case-with-wooden-front) I decided to have a go…
Raspberry 5 Gehäuse für Ice Tower und NVMe Board. NVMe Bottom Board: https://shop.pimoroni.com/products/nvme-base?variant=41219587178579 Ice-Tower:…
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
Pimped my Raspi with a 1TB NVMe Disk and a strong cooler. As I couldn't find a suitable case I made one - after some iterations it's good enough for my purposes, maybe also for someone else. I also attached the Freecad File.
Uses the simple (no mounts) case by @pyrho for the Raspberry Pi 5 with NVMe Base from Pimoroni. The NVMe Duo kit has 12mm stand offs instead of the 7mm ones in the original, so this accomodates those.
Bought a Raspberry Pi 5 along with the "active cooler" from Chicago Electronics Distributors and a "GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280" from Amazon. Needed a case, so voilà.…
Made for regular size 2280 PCB without a huge heatsink and 22110 mm version too. Print-in-place, just detach the flap-latches after print and they'll swivel. You can adjust the lid pattern by placing a rectangle on the pattern to block it…
This case allows you to use your Raspberry Pi 5 together with the Geekworm X1001 NVMe SSD hat and the Waveshare rear IO adapter with full size HDMI ports. Most of the parts should be interchangeable to the model by JoKneeMo. Just some…
Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. Four mounting posts are provided to mount the Pi on top and the Hat to the underside. These act as a…
If you downloaded this before 2/5/2025 download the lid again. The end with the USB and ethernet had more gap than intended. It's fixed now. This case has recesses on the bottom to screw the risers for the NVME hat in through the case and…
This is M.2 holder for any type of M.2 style device like a NVMe drive or WiFi card. There are 10 bays. The front 5 are 2.2mm and the back 5 are 2.8mm. Some drives have a bit larger chip or thicker stickers so those would fit better in the…
Se adapta para que los tornillos largos incluidos en pimoroni kit nvme puedan unir las placas a la carcasa. Se añade un separador de 1mm en la base para que encaje perfectamente y quede todo firmemente sujeto. Impresión en PLA sin soportes.
This is a basic case for people using the OpenPlotter MacArthur HAT on top of a Raspberry Pi 5, with the Pimoroni bottom NVME. It will require four 15mm standoffs in addition to the standoffs received with the Pimoroni and MacArthur…
Remix of the Apple M4 Mac Mini stand by smithpl, modified for custom fit of the Acasis Thunderbolt NVME enclosure TBU405M1. I am also providing the Fusion 360 file for further tweaking. Printed in Hatchbox PETG (Black), .4 nozzle, 3…
Print with Vase Mode or Spiralize Contour Print with 0.4mm Nozzle The fit between the Cap and the Base might be tight during the first insertion but it should loosen after a few insertions. Print Settings Resolution: .12 mm Filament…
PI 5 case that fits single or dual NVMe M.2 base, as well as PoE Hat. Designed around the Pimoroni Base and wave share hat -can be attached to bottom using m2.5 nuts or socket head screws -use 10mm X m2.5 standoffs between the NVMe…
2-Bay NVMe SSD Case – Sleek Protection for Your SSDs Tired of risking damage to your precious NVMe SSDs by tossing them carelessly into your backpack? This 2-Bay NVMe SSD Case is the perfect solution! Designed specifically for tech…
Added gridfinity bottom and made the slots shalllower as before the entire drive was even with top - so grippable now
A remixed model to add an Pimoroni NVMe Base to the Raspberry pi 5 This model has the LED & OLED openings (and a version that also has a button opening), and an opening to connect the USB-C port. The 4 holes for the NVMe base need to get…
I created a case for my Little Backup Box https://github.com/outdoorbits/little-backup-box It consist of Raspberry Pi5 Waveshare 4.3 Touchdisplay Geekworm X1002 M.2 NVMe SSD You need 8 additional 10mm M2.5 spacers
Extend an 30mm NVMe to 80mm. Work with a 0.7mm thick PCB. Category: Computer
In addition, only 4x 10mm spacers and screws were required. Printed without support.
Please note the different mounting hole positions: Tray - Pi 5 v2 - PIM699.stl: modified mounting holes, set back by 2mm Tray - Pi 5 v2 - PIM699_Original_Holes.stl: original mounting hole positions
I used 20mm spacers and put the NVMe base on top of the pi. Spacers are screwed to the bottom of the case and to the top of the hat.
Protective case for the NVMe SSD USB adapter
A bracket that is compatible with the standard Voron DIN rail clips and a raspberry pi 5 with NVME base from pimaroni.
6-Bay NVMe SSD Case – Sleek Protection for Your SSDs Tired of risking damage to your precious NVMe SSDs by tossing them carelessly into your backpack? This 6-Bay NVMe SSD Case is the perfect solution! Designed specifically for tech…
Legion Go NVME Battery Cover with space provision for the copper heatsink. Add insulator & airgap b/w battery and ssd to protect battery from heat damage. Careful in peeling off flexible antenna from the original battery cover.
I have two pi 5's on my pi server rack and both of them have the poe+ and nvme hat. This hat adds a challenge that it is just as long as the pi PCB itself and sits very high which required heavy remixing. I recommend longer screws to be…
I bought MAIWO K1689 M.2 NVME/SSD Neclosure to USB-C to be able to connect a NVME board via USB interface. Then I promptly lost a silicone plug it came with it. This is the replacement. This plug will also fit any mount hole that is 4.5mm…
This extends a standard NMVe 2280 slot to fit a 22110 SSD. It screw mounts to the 2260 and 2280 standoffs and can be pre-flexed to clear components as necessary. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No…
NVMe to USB adapter Case Remix Added a hole for the LED and adjusted the height of the pegs that hold the adapter in place. Remixed in FreeCAD. Ender 3 v2, JAYO PLA+ Copper Silk 0.4mm nozzle, 0.2mm Layer height.
Uses a compliant mechanism to snap the latch. Print upright, add slim supports to small overhang. Designed in FreeCAD.
Simple model for a smart NVME standoff usable on motherboards in case the original standoff has goen missing. Print with the top on the bed, with no supports and default settings.
Onshape: https://cad.onshape.com/documents/809c1d9aeac14ebee1c26306/w/fa98b59d5ea349d41a2c8a12/e/640e785a4a9a0e8f65ca9a5c?renderMode=0&uiState=66e48bfcb9fa683c1c80ea15 So, Dr Dread needs a case for a Raspberry Pi 5 with a Pimoroni NVMe…
raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink(from aliexpress) x1002 standoffs and flathead screws were not used, you need M2.5 SHCS longer than 10mm Raspi reset button can be pushed on the case. The case…
This compact case is designed specifically for the Raspberry Pi-5 with the Pi Active Cooler and Pimoroni NVMe Base . This NVMe hat* mounts the drive under the Pi, allowing for better cooling of the Pi. I've designed the airflow so that it…
Universal M.2 SSD Adapter (Multi-Format Caddy) This model is a comprehensive hardware compatibility solution designed to extend the life of your storage components. It is a rigid "Caddy" or frame that allows you to install…
Boitier conçu pour le raspberry pi 5 et la platine Geekworm X 1001 PCIe M.2, avec système de ventury pour le refroidissement du PI, bouton marche/arrêt fonctionnel. Carte SD accessible. Pour fixer le ventury utiliser les vis d'origine du…
Protective case for the NVMe SSD USB adapter . I just made it thinner and clip-on.
Printed with PETG, body printed without supports, base with supports
The original case is a great design, but unfortunately didn't fit my my Seeed Studio NVMe-hat because that PCB is slightly longer. This remix makes it fit by removing and manipulating the cutouts of the original model. This also means…
I needed a slim adapter for a 2242 to 2280 M.2 SSD. I also added a STEP file for easy modification
tweak the shape to fit the waveshare pcie to m.2 nvme adapter.
When I wanted to add a second M.2 NVME drive to my Dell Inspiron 5502, I discovered that the laptop did not come with required hardware. I needed to buy Dell part KYMC9 to install the drive. But what are 3D printers for? After a little…
I bought a Waveshare NVMe SSD HAT board (https://www.aliexpress.us/item/3256807189111583.html?spm=a2g0o.order_list.order_list_main.23.632718024AUFMX&gatewayAdapt=glo2usa) from AliExpress. It can fit nvme SSD from 2230 to 2280 and works…
Redesign of ventilation.
10-Inch Rack RPi "Blade" System (RPi 5 / NVMe / PoE+) There are countless Raspberry Pi rack mounts online, but when I couldn't find a solution for my specific stack of HATs and hardware, I followed the maker’s credo: If you can't find it,…
This is a case for a Raspberry Pi 5 with the option to add an NVMe connector with a fairly large PCI cable. It's made of several parts, to be printed with supports. The lid, the plates (to hide the traces of support), the controller…
Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. The case comprises the sleeve case top and bottom sections, sd end and usb end panels, 4x…
I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…
A remix of the Raspberry Pi 5 case, to support a Pimoroni NVMe hat mounted to the underside of the board.
See https://www.printables.com/model/722026-raspberry-pi-5-case-for-pimoroni-nvme-ssd-base-opt for full instructions on the different top models on how to use it. This is only the modified bottom, use a top from above to make a full RPI…
This is a clip that can be used instead of the silicone ring on the M.2 NVME heatsink. I made it because the silicone ring is easily hardened and broken by heat. Designed for slim 3mm heatsinks, mostly used in SFF systems. If you use a…
A small amount of support is needed for the screw hole. YMMV.
I designed this case for a Raspberry Pi 5 running the 52Pi PoE+ M.2 NVMe HAT . The goal was to make something that looks clean enough for a desk or home lab while still giving the Pi and NVMe drive plenty of airflow. The case uses a large…
In the original model, I had too much heat, so I created a maximally ventilated version. I am using the original pi coller and an overclocked cpu to 3000mhz. Box is compatible with Pimoroni NVME hat and original pi cooler. Long stress cpu…
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
This is a housing for a cheap chinese M.2 (SATA + NVME) to USB adapter. It features a quick fixing of the SSD and a port protection while it's not in use. After printing you have to drill through two holes for the activity LED and the…
I picked up an M.2 / NVME SATA adapter to use in a mini-pc and the SATA sockets seemed a little flimsy. I was concerned that they could be damaged by small tugs on the SATA cables over time so I designed a bracket to provide a little…
Warning : it is very small and difficult to print correctly, monitor the printer to avoid any problems
SSD_Organizer for 2.5 inch SATA and NVME. (HDD also)
