2,630 models
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Una serie di aggiornamenti pratici ed estetici per anycubic kobra 2 pro. - Piedi che allargano la base di 3 cm per lato aumentando la stabilità della macchina (aggiungere gomma antivibrante sotto i piedi), la forma li rende leggermente…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
For best fit you can resize it to take it two two times longer, but orginal size is ok too.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Simple alignment test, single layer 0.20mm, 0.2mm extrusion width. 200x200 mm.
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Led strip bracket for fan shroud.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Screen Holder for anycubic kobra 2 pro. pas besoin de support impression en 0,20
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Winner, 1965 Monza 1000 km, driven by Bondurant/Grant Bondurant (left) and Grant cruised to victory, unchallenged on the banked Monza circuit. Apr. 25, 1965 Ford decided to focus their energy on racing the new GT40 and Shelby American…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Anycubic x McGybeer A collaboration that finally brings the Articulated Cobra to life! Includes 2 versions of a Pencil Holder, with and without texture. The Cobra can be rolled both upwards and downwards! Cobra and Pencil Holder are able…
This highly detailed 3D printed cobra captivates with its segmented body that can twist, coil, and strike hypnotic poses. Each articulated section mirrors the scaly texture of the real venomous snake, bringing lifelike movement to this…
This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…
The Articulated Anycubic Kobra. This was a free file given to the general public at the premiere release of Anycubics' new Resin and FDM Printers recently (two of them being the Kobra and the Kobra Max). I obtained this file from the…
The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…
Quick release adapter for easy hot end servicing. Works with stock fan and duct, but works best with this custom duct: https://www.printables.com/model/724096-kobra-2-fan-cartridge You might need to scale slightly smaller or larger. You…
Remixed to fill out the holes for faster printing. The holder is reusing the two existing screws, so no extra hardware is needed! 3MF is for AnycubicSlicerNext, 0,24mm, Tree Support included
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
This little cobra has got his eyes on you! Glass eyes! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim for this one. That would have been a mess to clean up afterwards! I did use…
This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Use with this runout sensor relocator: https://www.printables.com/model/701416-kobra-2-runout/files The Minion top spool holder for the Anycubic Kobra Max, 2Max, Plus and 2Plus. Works without hardware but recommended to use with M5…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
Print with the flat side down, as shown in the model. This model works for Kobra 2, Neo, and Pro. I have updated the photos to include the proper way to install the holder. This way the spool does not come into contact with the printer in…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
Simple design to put the Ace Pro over head. The Ace pro weight is shared with the printer on the front end and the table top on the back end. Very stable and out of the way. Shelf sits securely over the top beam and hugs the vertical beam…
Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
This is Anycubic Articulating cobra model Download it and tag anycubic on tiktok
PTFE Guide for Anybucic Kobra S1 extruder No supports are needed. Improves the orientation of the filament for extruder and protects the ptfe from friction with the housing You can buy me a coffee with a donation. Me puedes invitar a un…
Anycubic Kobra 2 Max Profile for Orca Slicer Manually copied the settings of the K2M Prusa profile into the default Orca Slicer Kobra 2 profile. Maybe something can be optimized, but it's working fine! Also added a found bed stl file.…
This profile is the V2 of my previous profile that offers fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic…
This is my first attempt at a flexi model. The original cobra was a bust which I had sculpted, hence the detail in it. However it was converted to a support free flexible model :) If you wish to acquire commercial license for any of my…
Now you can upgrade your Kobra S1 with colourful, personalised Fan covers! + Duct Update1: Many tolerances and small details fixed, added hooks for the Duct, added Duct and tested both for compatibility and durability. i recommend using…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
Features Left-side mounting Steep angle to prevent filament poop from getting stuck Matching bin that fits under the chute Easy installation with no printer modifications required, uses existing screws and screw holes
Tool holder that fits the tools provided by the Anycubic Kobra. It also has a place for calipers and a small container for anything that can fit in it (I store a multi utility tool on it)
This is my Orca Slicer profiles for my Anycubic Kobra 2 Neo. PLA Filament profile included (Sets the bed to 45 degrees). I took the PrusaSlicer profile and converted it to Orca Slicer. If it helps please consider leaving a review and a…
Move your Kobra 2 filament runout sensor to the extruder with this mount! Placing the sensor closer to the extruder reduces filament wasted at the end of a spool, Great for top mounted spool holders and varies other locations. 3 Model…
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
This is the profile I have made for my Anycubic Kobra 2Pro with Prusa slicer based on many experiments and 3d model testing. and I got some amazing results. Well, lately I got down the rabbit hole of tuning, tweaking, and upgrading my 3d…
This is a riser for the Ace Pro for the Kobra S1. It Allows you to take the top cover off without needing a third hand. It also has drawers and hex walls on the side for as many optional tool/filament holders that you can think of.…
Merry Christmas from the Fresh Prints, Hope everyone has a happy & safe holiday. Thanks Anycubic Community for all the support. You all have made this worth doing. This cable drag chain system to help keep your bed cables in great shape.…
***NEW v3 updated model with better shape available here: https://www.printables.com/model/1490289-star-trek-tng-cobrahead-phaser-v3 Here is my improved version of the cobrahead phaser published on thingiverse. I wasn't happy with my…
Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…
Cable Clips for the X-Axis. Print Intrusions: PLA or better 100% infill Pair well with this one. This will protect you X Axis Cable from damage. Anycubic Tie Wrap Replacement for X-Axis
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…
Hello everyone, This model serves as a cover for the wiring and board that remain exposed after removing the stock shroud from the Kobra 2 series while installing the Mantis fan duct.…
This profile prioritizes fantastic print quality over speed, ensuring that your creations are meticulously crafted with precision and detail. This profile will allow you to achieve the same fantastic results that I have without…
There are basically only 3 print processes: the body, the tires, and the finer details. I printed everything except for the tires and the body in gray , some were painted red if necessary. All gray parts were printed with 0.2 nozzle and…
KameraHalterung Kobra 3
Update v2 added an updated version . The shortened part differs from the first version by 6.2mm. In the first version, some users faced the problem that when moving the extruder motor could collide into fasteners when printing tall…
A small tray to go below the heat bed, to catch purge from the hot end. The tray has some kind of studs below that go into the aluminium extrusion profile cross beam. There is enough distance to the rollers that move the heat bed, and you…
this is a complete remake of my previous 8 way colour hub found @ https://www.printables.com/model/970762-anycubic-kobra-3-dual-ace-pro-receiver. This new version includes: A stronger retention cap for less broken clips. A completely…
Ide o obraz na stenu alebo dekoráciu na stôl ktorý aj svieti a je vhodný ako vianočný darček. Je to niečo, čo si môže užiť každý! Na dokončenie a svietenie obrazu / dekorácie budete potrebovať elektrické osvetlenie na baterky. Pred…
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
This Strain Relief works with your OEM cable bracket. No disassembly required. Just tie wrap and your good to go. Also including a file for clone of OEM bracket, in case you want to change the color to match your new strain relief. The…
All items were measured and model specifically for the Anycubic Kobra2 Max. Just Download and print no muss no fuss. Complete Cover kit premeasured. For any other printers I have included 2 files so you can make your own DIY Route…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Use 2 M4*8mm screws to mount this spool holder on top of the Kobra 2 / 2 Pro to save some space on your desktop. My full review on this printer:
Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…
To add a profile for a specific printer, adjust the table dimensions and axis height according to the model, and then customize the profile according to personal preferences. PLEASE PROVIDE FEEDBACK ON HOW THE FILES WERE HANDLED AND A…
Hinge seal for the Anycubic Kobra S1 to improve heat retention Recommended material is PETG, ASA/ABS, PLA Supports are required Total filament used is 2.5g
Pojemnik na "kupki", jedna część mocowana na ścianie tylnej, druga część doczepiana na magnesie. Projekt w formacie STP tutaj, pozwalam na modyfikację, proszę tylko podlinkować źródło!…
Hygrometer holder suitable for the ACE Pro from Anycubic. The holder fits the super cheap, round hygrometers that you can find everywhere on Amazon, Ebay or AliExpress. The hygrometer can be read through the lid of the ACE Pro and does…
This 5-to-1 filament hub is designed to replace the stock 4-to-1 hub on the Anycubic Kobra S1 Combo. While the original hub only accommodates the 4 tubes from the ACE Pro system, this enhanced version adds a fifth port for connecting a…
I designed this model up as the ones available weren't as big as i wanted, this design holds close to 200grams before needing to be emptied. have designed it with 2 holes to glue in two 8x3mm magnets to attach to the screw covers on the…
Anycubic Kobra S1 / S1C - Tool head cover maintenance Essential design for maintenance your S1 and S1C. The model is designed to hold the front cover of toolhead for nozzle changes, hotend maintenance... without having to connect and…
The flow rate calibration is done in order to fine tune the amount of plastic extruded by the printer. Also known as Extrusion Multiplier , by calibrating the flow rate you can fix issues caused by under-extrusion or over-extrusion.…
These are the settings I currently use for my Kobra 2 Neo with OrcaSlicer, I will try to update them if I find any good tweaks. In order to use them: -Printer: Kobra 2 Neo V1 -Filament: Any / make your own -Process: Use the processes that…
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the touchscreen area. Print the toolbox in vertical position. Print the inside component in orizontal position. You can check my other…
Brackets to support the heater bed cable from drooping down and snagging destroying itself. Includes a place to use a tie wrap if you wish but don't need it 25% Gyroid infill. Alternative New Version : Anycubic Kobra 2 Max Bed Cable…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to all my files in one…
This is just an improved Printer Profile and Print Settings for the Kobra S1 that increases printing speeds significantly, while not loosing out on quality. I have increased the max speeds for the motion limits of the printer as well as…
A custom-designed solution for collecting purged filament from the Anycubic Kobra S1. The mount attaches to the printer using the two existing screws—no modifications or extra hardware required. The bucket then slides into the mount and…
This model might not be strictly needed to prevent the wires from being damaged as they are pretty beefy, but having all the wires on the printer match is fun! The design uses 17 ChainLatches, 17 ChainLinks, 1 ChainEnd, and 1 ChainStart.…
Changes the angle in which the filament feeds into the AnyCubic ACE Pro to prevent print errors. Used the idea of the Ace Angler by @bedridden_5744518 but slimmed down the model and changed the curve the better match what's on the ACE…
I recently acquired the Anycubic Kobra 3 Max Combo. Unfortunately, there's no collection container for the discarded filament. You can place a container under the purge wiper, but with the force with which the poop is ejected, it's not…
After being fed up with the flimsy excuse of a spool holder that came with my Kobra 2 Neo. I decided to make a top mounded spool holder. (I wanted more horizontal space) This Spool holder bolts right into the top center of the frame. This…
A much needed poop chute for the Anycubic Kobra S1 Combo. Vented at the outlet and chassis fan to avoid blockages. Screws into the machine with the original screws. With removable collection bin.
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
Greetings Printables community, I'm pleased to introduce my first model, developed while acquainting myself with the capabilities of the open-source 'FreeCAD' program. Holder for a Spool Holder: Anycubic Kobra 2 The design of the Anycubic…
A cobra coiled around a tealight well with its hood flared over the flame. The light catches the underside of the hood and the scale texture on the coils, and throws the snake's shadow out across whatever it is sitting on, which makes it…
Anycubic articulated-cobra is a special stl made for Kobra Series printer Category: Animals
This is a custom-designed top mount for the Anycubic Kobra 3 Max, engineered specifically to support the ACE Pro. The design is minimalistic yet highly rigid, providing a secure and stable relocation of the ACE Pro to the top of the…
This is the file that AnyCubic provided to print for their Kobra series of printers launch in March 2022. The STL is the original file. I also uploaded a rotated and scaled the model to fit on the Mini & MK3S+. These versions also have a…
“Front” model was the first design and it requires screws. “Diagonal” and “side” models slide into the rails so they don't require screws. If your printer doesn't have threaded screw holes these should do the job. Although I designed…
I was struggling with my bed gantry being not level, and the Anycubic wiki wanted me to adjust the belt and leadscrews, but that was too much work for the fine adjustment I wanted to make, so I made these little spacers to go between the…
Newly created fan duct for Anycubic kobra neo. it's about 4th version, it's still not perfect, but much better then stock. Printed with 0.6 nozzle with 0.2 layer height from PLA ( PETG will be probably better ), without supports Just…
Kobra Max Direct Drive uses the original OEM original extruder without buying another extruder allowing you to upgrade to direct drive. Plus, a cut for the cable does not get in the way of direct drive. You may need to get this cable if…
The Silicon Spacer mod is intended to help flatten/level the print bed by enabling you to vary the depth of each bed mounted screw in an effort to compensate for variations in manufacturing tolerances. Silicon Spacers found on Amazon…
I remixed this Anycubic Kobra S1 PTFE Guide using Tinkercad. I removed the top side of the PTFE Guide, so I could install it, without having to remove the Bowden Tube that leads to the extruder, which is almost impossible for me to…
A set to catch Kobra 3 poop between the filament changes. It's designed to require a tied installation. To set it up, disassemble the purge wiper and untie the screw that holds the plastic purger guide (marked as X on the second image).…
Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…
Cobra (Scan vom Einstar Vega) Größe: 110x85x90 (x-y-z) Druck: Füllung Gyroid 15%, Stützen = Baumstruktur
Required hardware: 1 - NEMA 17 stepper motor (try and get one that's the same height as the original motor 34 mm. if you use one that's too tall it might interfere with the x-end-idler bracket when you try to home the Z) 1 - motor…
A fix for the Kobra 3's print head not getting close enough to the magnet to pull the purge sling arm back. This simple fix just hooks into place and keeps the magnet about 2mm closer to the print head so that it catches every time.…
