Counting matching models…
I pretty much just took the model 660 uploaded, chopped it up, and put it back together so that the s-foils (wings) are in 'attack position', or the distinctive X shape that we all know and love from the movies. I would recommend printing…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
HO sorta scale steel coils for gondola cars. Print coils on sides and coil holder flat. No supports required. I've included a completely round coil for use with the holder and a coil with a flat bottom so as to not roll around in the car.…
Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…
I designed the holders so that the measuring coils are neatly in one place in the control cabinet. A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. The holder holds…
So I was painting the coils on the #Rocinante & I was thinking, man this should be filament there!! Hop to #Blender , do some mods and hit print! It so worked for the first time! :) Looks much better! If you plan to use FDM then each…
This is a set of shims to adjust the mast rake of a windfoil with deep tuttle foilboxes. It includes shims for 0.5°, 1.0°, 1.5°, 2.0° and 2.5°. Print it with PETG and 100% infill. I use them with my Starboard Foil. Print Settings Rafts:…
I designed this Box so that my mother could store all of her essential oils in it. The dimensions are taken from the doTerra 15ml and 5ml oil bottles. It's got space for 30x 15ml and 7x 5ml. As long as oil bottles from other brands are…
Allows you to conveniently store your essential oils. Required material: printed parts x8. Using PLA as a printing material, the strength of the product is enough to fulfill its function.
I am a designer for work and didn't love the font of the original design so I decided to update the font. I removed their font and added a thicker font and I made it larger on the soil, both so that the numbers can be seen a bit better.…
This is my first model I made outside of fusion360 tutorials, this is made specifically to hold 28mm diameter bottles (with a bit of wriggle room for labels etc). Printed on Prusa Mini+. Suggestions and tips are welcome.
I have an old Optima DELUXE PROFESSIONAL essential oil nebulizer / diffuser that is 30+ years old and the pump still works great. The old pump is rated at 5000 cc/min at 4.0 PSI The glass nebulizer however has seen better days and is very…
Every sewing project needs a different color, and for every color a new coil have to set up. I just lost the overview wherefore I made a simple carrier to keep them organized somehow. It works for standard sewing machine bottom coils (at…
I made this try to help organize the many oils we had in bins. Make them ease to access and easy to see when making the choice on what to use when you need it. Features Drainage in every slot. Simply rinse as needed. Easy to flush if…
An adapter for Geeetech coils or others that fit. I decided to use the 50mm bamboo spools. I used that as a weight. https://www.printables.com/de/model/422882-spool-weight-for-bambulab-ams-spools The 3mf file contains all the data for a…
Adapter für Jayo Filamentspulen um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa MK4 Spulenhalter ruhiger und leichter. Das Gewinde schmiert man am besten mit…
Design wingspan is approx 980mm, longest section front to back is approx 220mm and chord at fuselage position is approx 30mm , Profile scales smaller toward wingtip while keeping generally same shape apart from some modification by the…
Bambu Lab Aufbau für AMS mit LED / RGB / Spulen / Spulenhalter Video zu meiner Konstruktion https://youtu.be/zKUoaOzXjaQ Die Idee hinter dem Aufbau Ich habe den Aufbau konstruiert um mehr Licht ins Dunkel zu bringen 😊 und um zusätzlich zu…
Something to decorate an office or your technical cave of choice. Makes a great Christmas gift for that aviation enthusiast in your life. Print with dark colour first, then switch above 2mm to white or other light colour. 250x146x2mm but…
Designed in 3 parts and will require 85 ¼" or 6mm ball bearings. Will hold 32 1-¼" or 32mm diameter bottles.
This is another spool for loose large filament coils that I designed about 4 years ago. The pieces push fit together. It works OK, is fast and easy, but is a fixed size.
A simple rack for 8 or 21 bottles: 10 ml (⌀26 mm) or 15 ml (⌀29 mm). The sockets for 10 ml bottles are 20 mm deep and for 15 ml bottles 15 mm deep.
The part roci-2b needs to be mirrored.
The holder is a nice storage for 40 phials with a diameter up to 25mm. The expensive phials are stored quite secure and the type remains still well readable. It's designed to print without supports: Print all parts once (1x top, 1x…
Spring is here! Its time to build some soil sensors for the garden. The HydroGuardian 3D models consist of a streamlined sensor housing and a user-friendly, snap-together electronics enclosure. The sensor housing is designed to securely…
A bottle holder for 6 essential oil bottles by O'Linear. The bottles are 25mm diameter. For extra flair you can add some rubber feet on the bottom and then it won't slide around and looks a bit more professional. Fusion 360 model…
Diffusers for Essential oils have become very cheap in the past few years. I have noticed there is a general size and form to the cheap ones sold on Amazon. They typically come with a pre-measured water cup. So I wanted everything to stay…
This design has been revised but is not yet ready for publication. 17-4-2025 Do not print, Information is purely for knowledge sharing. There is a philosophy behind the sealing with doublesided acrylic tape. Changing the design might void…
An essential oils holder for 25mm diameter bottles
This is an upgrade to the section containing the power coils.
Keep your Wolf River Coils TIA Mega kit organized. Made specifically for the 102" whip and 24" tripod legs and Silver Bullet 1000 Coil with the tripod mount attached. If nothing shows in your slicer scale to 1000%
My wife has a ton of Essential Oils but only uses a few at a time. So i created a holder/tray to house her most favorite oils and also created a space for the roller in the front. Prints without supports. 0.2mm layer height is fine.
I know there are lots of funnels out there but we needed a specific size to transfer plant therapy bulk essential oils into 30ml vials. This funnel worked perfectly for the job! The funnel is 54mm OD at the top and 10mm OD at the bottom,…
I made this Gridfinity holder to fit my Innokin “Cool Fire IV” vape. I guess very few people have that model but I really love the size so I've had it for years. It might fit yours too - main body of vape with battery is 24.8mm at its…
Note: Please be sure to use the R1 STL models. They have better clearance hole sizes. I have a roof rack on my camper van that is 69 inches wide. It has two 8020 40-4040 crossbars across the top. These 3D-printed shapes are intended to…
Essential Oils Diffusor for AirCare Evaporative Humidifier Model 836000HBCN For the diffusor pad, you can use a small piece of felt or several layers of paper towels.
A print-in-place articulated snake that comes off the bed in one piece — no supports, no brim, no assembly — and coils into a full spiral in your hand. 16 necked vertebrae are joined by captive ball-and-stalk joints. Every segment tapers…
Krabička/Box na vonné oleje. Pro lahvičky o průměru do 26mm a výškou cca do 65mm.
Suitable format for a 12 mm diameter cross tube. For my support, I laid a 50 cm tube, which allows me to store 6 to 7 spools of filaments. 50% filling, 0.16 layer and 0.4 nozzle Fixing hole designed for a diameter of up to 6 mm
The tripods legs are meant to go through the holder and the whip got into the thicker slot. The idea is to print 2 of them and put them on opposite sides and use a short length of paracord to keep slight tension to keep it all together,…
VAPING LIQUIDS Holder 22mm | REMIX of '6 Essential Oils Bottle Holder' note: changed/scaled the diameter to 22mm (white part)
my Wife wanted to store some of those 23mm oil flasks i thought it would be a good idea to use gridfinity, becaus i expect additional flasks later on in that system i can easily extend that later on, or modify it for bigger flasks etc. i…
NU = Board Nose Up (meaning there should be more front foot pressure needed) ND = Board Nose Do (meaning there should be less front foot pressure needed)
I made this for essential oil. I recommend printing it it a black pla or petg. I hope to have a lid for it out soon!
Essential Oils Rotative Stander
English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…
My daughter lost taste and smell during Covid, so printed a box tli pure oils. So I designed a box to hold pure oils to tain her nose. I have printed the first layer of the lid with setting "Bottom fill pattern: hilbert curve"
This will fit 30ML bottles. Helps them to not fall over. I did use supports. I also used PLA for this Project.
Introducing my meticulously designed Essential Oil Holder, tailored to neatly organize and display your treasured collection of up to ten 3 oz essential oil bottles or other small miniatures. Crafted for both function and elegance, this…
the coils have accumulated. I decided to make a storage of small parts out of them. I made a pen. I put it on a spool and covered it with a lid.For the handle, you can use a stud from the kit or use an M6 bolt with a length of at least…
My electronic cigarette uses the Z coils by Geekvape, and I hate it when the box is flying around my desk. So I did the logical thing and stuck the coils to my pegboard. In addition to the holder, you will need two M2.5 nuts from the…
There are similiar models: https://www.printables.com/model/1165508-aroma-oils-stand-pyramid-ii-more-bottles-amost-no https://www.printables.com/model/1160984-aroma-oils-stand-20-bottles
Hey Vaping enthusiasts and DIY masters! I'm thrilled to introduce my latest 3D printed creation for the Gridfinity system – a compact and highly functional 1x1 unit box, meticulously designed to hold your spool winding aids, commonly…
Dall'esigenza di riporre in maniera ordinata il rame smaltato quando si riavvolge un trasformatore nascono questi semplicissimi rocchetti a vite (per poterli stampare senza supporti, tempo di stampa circa 50 min a 200 mm/s). Sono composti…
The Imperium of Man industrial complex is powered by Plasma Generators (Low Gothic) or Generatoriums (High Gothic), also known as Plasma Reactors to the TAU. These models represent the Plasma Coils found in such constructs to be used when…
This is the wind tunnel I made to test different airfoils. Materials: A 3d printer Filament 40x40cm of 30 mesh ( squish between the hollow 40x40cm square spacer and contraction cone) 4 120mm fans A fan speed controller sheet of acrylic…
Big thanks Heinz Spiess for sharing your design . I like idea and design of original but it is not suitable for me. This thing the same as original except two changes: Central hole in hub changed to 6 mm but external radius of hub the…
This little gadget should make filling veggie caps much easier. It is sized for the Doterra brand caps but can be increased or decreased in size in slicer before printing.
Simple holder for Young Living Essential Oils 15% Infill 2 Walls No support No post processing
Hello! This are my BAMF inspired airfoil templates used for hot wire cutting , I taped some aluminum tape over them to last longer. I printed them using PLA and they work great, no melting In photos section you can see wing dimensions,…
There are similiar models: https://www.printables.com/model/1163921-aroma-oils-stand-pyramid-21-bottles https://www.printables.com/model/1160984-aroma-oils-stand-20-bottles
Adapter für Jayo Filamentspulen um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa XL Spulenhalter ruhiger und leichter. Gegenüber dem anderen Modell für den…
Oproti původnímu modelu jsem přidal středící kroužek, vhodný pro špule s vnitřním otvorem 75mm. Špulka je nyní stabilní a je vymezen i posuv “do stran”.
There is available drawers for this model, in case when you don't need aroma stand :) https://www.printables.com/model/1166817-drawers-for-aroma-stand There are similiar models:…
Print in TPU, without supports, 1 top and bottom layer, 2 perimeters, 10% infill gyroid. Position with the flat surface on the build plate. You can increase print speed significantly over the defaults. Recommend printing one at a time, to…
This model is an add-on to use tent pegs to add stability to the Wolf River coils TIA antenna tripod with short legs. (It may work with the longer legs, I don't have a set to try out.) I used the larger nail-style tent pegs purchased from…
Insert for coils with an inner diameter of 75 mm
Adapter für die neuen Jayo Filamentspulen mit 55 mm Kerndurchmesser um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa MK4 Spulenhalter ruhiger und leichter. Das…
The X-Coils 15" Concentric Coil Top Cover is a protective cover designed to prevent coil wear and scratches when recovering targets using a scoop. The stl file includes a brim and break-off gussets to stabilise the print while 3D…
Multiboard holder for the OilStick from Slant3D - https://www.oilstick.shop Recommended print settings: 3 walls / perimeters 15% infill supports from buildplate - model laying on its side 0.2 mm layer height 0.40 mm nozzle PLA Special…
Thank you, @georgmierau, for sharing your model. https://www.printables.com/model/1124769-essential-oils-rack-8-or-21-bottles This version of the tray will secure the bottles while refilling with the oils. It also provides storage and…
This elegant, space-saving Aromatherapy Display Stand is a stylish and practical solution for organizing your essential oils and creating a calming setup at home or work. Designed to hold 16 standard 5ml bottles , this all-in-one stand…
You can use any material ABS also ok. 2.5mm thickness and you have to use litmaz wieres(1.2mm) for round this. one coil use 8meters something for round it. no heat problems occur. normally 65KHz switching frequncy you can use. any problem…
This free Frankenstein Laboratory cookie cutter STL includes the Electric Coils cutter and a universal handle. It is a practical 3D print cookie cutter for Halloween treats, mad scientist themed baking, fondant decorations, and spooky…
For prospectors running a GPZ7000 with an 8" X-Coils coil, this skid plate adds extra material to the leading edge to allow greater wearability.
On July 15, 2026, all files were edited: - The screw holes and electrical cable entry holes were enlarged. - 3MF files now include the Fiberlogy PCTG printing profile (printer CORE One L). Overall dimensions: 174x120 mm Print in PETG or a…
Slips onto the end of the Dyson Ball crevice tool to provide suction at a right angle.
Universal spacer for large bore coils. Can print both PLA and PETG
I made a small storage container to hold my liquid for my vape. It fits 6 packs of 10ml liquid bottles as well as a open liquid bottle at the front and a pack of coils on the side. I designed it around my geekvape coils and elfliq bottles.
the coils have accumulated. I decided to make a storage of small parts out of them. I made a pen. I put it on a spool and covered it with a lid.For the handle, you can use a stud from the kit or use an M6 bolt with a length of at least…
Here is the COP ( coil on plug ) adapter that lets you securely bolt on the audi R8 COP's on your 1.6 miata BP engine. COP part number for your convenience NGK R 06 02 S 003 00 0012342424 Tested on a NB2 1.6 miata Printed it for a test…
For prospectors running a GPZ7000 with an 8" X-Coils coil, this skid plate adds extra material to the leading edge to allow greater wearability.
On July 15, 2026, all files were edited: - The screw holes and electrical cable entry holes were enlarged. - 3MF files now include the Fiberlogy PCTG printing profile (printer CORE One L). Overall dimensions: 174x120 mm Print in PETG or a…
I have an old Optima DELUXE PROFESSIONAL essential oil nebulizer / diffuser that is 30+ years old and the pump still works great. The old pump is rated at 5000 cc/min at 4.0 PSI The glass nebulizer however has seen better days and is very…
This is a box for 6 dōTerra 15ml oil bottles. My mother wanted a small box she could take with her on travels with her "emergency oils" 😉. The lid is held by 4 5x5mm round magnets, 2 on each side. You'll have to pause the print in order…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Dis Coils cosplay horns from Baldurs Gate 3. The supports required. Some…
3D pieces for the wonderful unofficial expansion; "Spoils of War" from user Maximillian Santiago to the game Scythe from Stonemaier Games by Jamey Stegmaier. You will need 9 scroll pieces and 7 treasure chests/crates. I put two different…
Creality Space Pi dryer cover for FDplast rolls. FDplast coil: diameter - 202 mm, center thickness - 78 mm, edge thickness - 81 mm. It rotates freely in the supports. A 2 mm acrylic sheet is cut out according to the template. The edges…
Mobil Motor Oils sign Wall Decoration Logo Poster. I have uploaded 2 designs, one for those that have a multi-color system (AMS, CFS, MMU) and another with which multi-color is not necessary, the color is changed by layer number. Ready to…
Here is the COP ( coil on plug ) adapter that lets you securely bolt on the audi R8 COP's on your 1.6 miata BP engine. COP part number for your convenience NGK R 06 02 S 003 00 0012342424 Tested on a NB2 1.6 miata Printed it for a test…
This is used for essential oils. put a few drops of essential oil on the cloth and put it in the dryer
I made this holder for some friends who are really into essential oils. I myself have never tried the oils but they seem to really like it. I made them a holder for their oil bottles/tubes. Their oil bottles/tubes had a diameter of…
Keep your essential oils organized with this essential oils storage tray. The tray holds 1 inch (25mm) square bottles. Looks great when printed with a silk PLA or multicolor PLA. Slicer Settings Used (Cura) Material - eSun Copper Silk PLA…
Essential oils bottle organizer made for a very shallow drawer. All three shown in image used together. mix and match whatever works.
A small and simple tray for oil and other liquids. The feet are printed in Filatech FilaFlex40 . The tray is printed with Prusament rPLA Algae Pigment . Print with brim to prevent warping.
