Counting matching models…
News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…
If you need to secure your precious belongings in a safe place, you found what you were looking for. This safe is secured by a 3 digit combination to prevent anyone from opening it (unless they have a hammer or a heat gun, I mean it's…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
Working butterfly comb, print 2 handles and one comb. It's quite tight to clip it together, but you don't want it to fly apart mid swipe. It works really well. Printed in both PLA an PETG pretty good results for both. Print Settings…
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows creation of custom grid sizes and irregular shapes. About OpenSCAD OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with…
Update (7/14/2023) - no glue version! I've re-worked a few things so that everything presses or snaps together, making it a great project to put together with kids. This (mostly-flat) kit card is a bit of a challenge to make but will…
A simple shelf bracket with a honeycomb pattern! Here you can find two more designs I made from this shelf bracket. 240 by 200mm. Take the long or short side up. You can also simply scale the shelf bracket. The holes have a diameter of…
A highly detailed Zombie hand coming out of the ground. Model designed by my brother, Mateus Kurzhals, and printed on the Original Prusa I3 MK3S. The model was post processed and painted afterwards. Just Print your own, half bury it on…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
Honeycomb storage wall with borders for mk3/4 size.
Organize your workspace like a pro! This upgraded Honeycomb Edition of the Stackable Crate Plus combines structural strength with a modern aesthetic, optimized specifically for 3D printing. Key Features: Perfectly Stackable: Designed for…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Fun toy to play with. Hexagon columns jointed together can slide up and down. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on photos was printed with Bambu Lab…
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
¿Quieres un soporte para teléfono móvil simple y fácil de imprimir? Presentamos: el soporte plegable para teléfono en forma de nido de abeja. Este soporte de impresión in situ también se puede imprimir en piezas separadas para una…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
A remix of the honeycomb lamp shade ( https://www.thingiverse.com/thing:3175389 ) resized to a 120mm base diameter. It has an additional surface at the bottom for easier mounting to a wooden base with a lightbulb socket. Alternatively you…
Combs are in the original "click" system. Randomly tested sizes: 1mm, 2.5mm, 4mm, 5.5mm, 7mm, and 8mm – each one fit my razor. I don't recommend printing multiple at once. Print one first and check if it fits. Printed on a problematic…
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…
Honeycomb shaped organizer Outer dimensions: width: 169mm depth: 152.5mm height: 102mm Max object size: Round: up to 47mm diameter flat: up to 52mm width (spatula…) Wall thickness: 2.5mm Featured in Prusa's Weekly Prints #54
Sometimes it is faster to print a comb than to find it in the bathroom
This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…
This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size. The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
This is a shelf and shelf support and for the Honeycomb Storage Wall (HSW). The shelf is a the standard wall-honeycomb-part.stl with side walls added. Please note that some of the honeycombs that may look complete on the shelf supports…
Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…
A Pencil Holder with a honeycomb texture. Print time:5 - 7 hours at 100% scale (depending on settings) Dimensions: 7 x 9 cm (diameter x height) Weight: 42 grams Tip: try to calibrate your retraction settings before printing for the best…
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded. UPDATE 16/02/2024: added folder with other filler size, in case you are…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Border pieces for the fantastic Honeycomb storage wall to give a “crisp” look to the edges. The pieces were designed with the mk3s base file ( wall-honeycomb-224x190sizemk3s.stl ). The models needed depend on the number of panels you're…
A more detailed version of my previous model. I tried to incorporate as many details as possible in this one, which however makes it less suitable for printing sadly. This model includes: Detailed AMS system Exaust Fan Buildplate See…
The source marked this model as adult content.
simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…
An easy to paint 3d model of Goomba from Super Mario. He will balance himself, however since he is in a running pose, if you plan on moving him around, a base may be a good idea
New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. https://www.printables.com/model/544779-screw-wall Works great, use it for tools or a shelf. No support is needed. Check out all my other Honeycomb Wall designs…
Modular Honeycomb Storage Container with space for label This Container is a customizable storage solution designed for makers, hobbyists, and organizers. The modular container features: Screw-On Lid : Secure threaded lid for easy access…
*** Newer version added - Version5. *** Can find under remixes. Cable Comb used to organize wires (i.e. ethernet cables) so that you can zip tie. Print instructions Recommend printing with 20-30% infil to add durability/rigidity.
BOM: Printed with ROSA3D High Speed PLA Gray This is a modern, functional door wedge designed with a structural honeycomb lattice. Unlike solid door stoppers, this design utilizes the natural flexibility of the hexagonal geometry. When…
Storage boxes for the Honeycomb storage wall. 3 different sizes: 30mm 50mm 60mm You will also need: 2X M4 printed inserts from the original Honeycomb storage wall design 2X M4 nuts 2X M4 12mm screw
EDIT 2/25/24: Added a few options with finer teeth spacing and different teeth thicknesses. I was inspired by a few combs here (i.e. Rudy87 & moreconfusion ) and wanted to take a shot at one myself. Designed from scratch to be robust and…
This Honeycomb Desk Organizer is a smaller version of the Honeycomb tool organizer by Guillaume Gendron. I preferred a smaller version with less 'honeycombs' to store my stuff, since I didn't need the same amount of space. The organizer…
Three different size holders for the honeycomb wall system. 40mm x 80mm, 55mm x 105mm and 80mm x 80mm. All sides are 50mm high. Inserts are already attached. The sides are HWS walls, so you can add hooks or other HWS things. I printed…
WARNING: Contains small parts. Not intended for children below 7 years old. Santa Hat now available! Download it here! A base/diorama builder is available for download for this mini figure model! _____________ IMPORTANT NOTE ON COMMERCIAL…
Simple honeycomb end pieces I made for a monitor stand. Dimensioned for 1.5 cm thick plywood or similar. About 17.5 cm deep. I uploaded a version without and two versions with brackets. I also made a middle brace that can be put in the…
Simple holder for snips/pliers. Attaches to the wall with the M4 insert from the Honeycomb wall.
A cable comb to help organize your AIO radiator tubes. For use with 11mm OD tubes. Comes in varying hose spacings of 5mm, 10mm, 15mm, and 20mm.
Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…
Hey everyone! I designed this IPad stand for my IPad pro 12.9 with 60° viewing angle. As it got more popular, I added more versions to fit different IPad sizes. I would recommend 60° for horizontal, and 70° for vertical IPad orientation…
Trying to speed up printing a HSW, Stacked 14 inverted HSW to get near 24H print time. With AMS on X1C each "layer" of HSW is printed with PLA or PETG, that permit each layer to not be glued to each other (So 1st HSW in PLA, 2nd in PETG,…
A general purpose box I made for my version of the excellent Honeycomb storage wall by RostaP | Download free STL model | Printables.com I designed it for 2 containers of super glue but obviously it would work for whatever. In the second…
Beard comb with loop Printable .gcode (.4mm nozzle and 0.1 layer height) as well as .3mf and .stl files available
DESIGN INTENTS Fun trophy for our annual Superbowl night with friends This is a 50% sized Lombardi trophy. Not an exact replica, some parts were redesigned Designed for 3D Printing = no support needed All details are in the PDF uploaded:…
V2 16.03.2024 Changes: Thicker walls, as a few people require. Few more sizes added (only for V2 version): [mm] 130x80x42, 130x42x42, 100x42x42, 100x80x42, 90,80,42, 80x80x42, 70x80x42, 60x80x42x50x80x42. If you want the same depth and…
This a model of the Atomic Bomb, Fat Man, which was dropped on Nagasaki, a city in Japan, on August 9, 1945, and ended War World II. This was made for a WW2 project for school. If you would like to support me, please consider downloading…
A simple bookend with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is 120mm square. I printed in CF PC blend…
Honeycomb/Hex mesh pattern made by me in TinkerCad. This pattern can easily be copied to add more together for a larger size if needed. Supports = No Brim = No Filament = I used PLA but anything would work
Who wouldn’t want to own a car as legendary as the Škoda Octavia? Its appeal is reflected in the more than 7 million units it has sold, and the fourth generation is no exception. Its success is built on a clean, timeless design,…
Put simply - So easy to remove they fall out. UNTIL you put something into them, then so tight they might even hold tighter than the original design. How? Magic of course. The inserts for attaching to the wall also have the same cuts to…
These are printed in flexible TPU and are designed to be as safe and as harmless as possible while still being effective. Drop them from 200 feet or higher to allow them to reach terminal velocity and produce sound. The body has a hollow…
a basic shelf for the honeycomb wall in various variants. 13,5 x 7 cm 8 x 7 cm 8 x 6 cm 8 x 5 cm Just look for my other useful stuff for the Honeycomb Storage Wall.
Gridfinity base plates with adapters to lock to honeycomb wall. Be aware of weight of load of lager baseplates. This project is based on https://gridfinity.xyz/ If you want to support me, please buy me some filament .
I always wanted to design a nice looking stackable crate primarily for testing my 3D printer. This crate is designed to be printed without supports by relying on bridging capabilities of filament and printer. Best print settings are 0.2mm…
UPDATE 05/03/22: I got the filenames confused. Now they are all right added 1x2; 5x2; 6x2 ________________________________________________________________________________________________________________ I wanted to make my own Cable…
Hi, The print crimp the honeycomb (see on picture). This system is very stable on a Sculpfun honeycomb. Printed in PETG ----- Salut, le Système pince la doublure du nid d'abeille (voir sur l'image). Ce système est très stable sur un nid…
Plant supports in different sizes and shapes. Scale the models according to the size of your print bed or the size of your plants. The plant supports can also be cut from MDF or other materials with a laser cutter. (pdf for laser cutter)
Created by myself mounts/holders for useful tools which can be use during preparing your honeycomb storage wall. List of custom mounts; Wire Striper for LAOA LA322024 ( https://www.aliexpress.com/item/1005005968272291.html ) Metal burr…
This is my wariation to honeycomb wall key holder. Honeycomb as key holder is not my idea but I was not satisfied with any version I found on internet. Honeycomb is attached to wall by 2 small screws but you can use both side tape if you…
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
2 pieces simple hexa-comb drip tray. I used PLA for both parts, but you can use PETG or ABS for better durability. Dimensions: 150 x 230 mm Ideal for V60-02 dripper and 600ml kettle ;)
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
177x190 honeycomb section, fits on Ender 3/5 beds. Should still tesselate properly.
Braaaaaiiiinss! Board up your windows and doors, stock up on tinned tomatoes and toilet paper, because tonight the streets belong to the living dead! Wishing I'd come up with this a little earlier in the month, but this year's Hallowe'en…
This is a new HiveBox version, modular, simple, and customizable: Bring a touch of geometric style and perfect organization to your workspace with this honeycomb-inspired drawer unit! It is the perfect solution for organizing small…
There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.
This is an easy to print, cheap, and if I may say so, attractive way to ensure that you never again have to burrow through piles of PLA offcuts to get to a pen or pencil. With 3 different sizes of module available, you can create a desk…
Made a Comb version of the Butterfly Knife by Night Raid The knife is replaced with a comb The handles are a little different, so the comb can fit inside. I made the connecting pins a bit smaller for an easier installation. Enjoy!
Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…
WARNING: PLEASE READ BEFORE DOWNLOADING This model is not for beginners. There are many interlocking pieces and minor tolerance issues can quickly multiply to create a non-functioning door and/or lock. If you decide to build this, please…
👻About Enjoy the Spooky season with a zombie ghost friend. Scare your family away with your little ghost keychain. This little ghost will always be looking for some brain so be on the watch! Check out all the other spooky 3D designs I…
New, NEW Screw Wall! Check it out, its much stronger than the Honeycomb wall. https://www.printables.com/model/544779-screw-wall no support is needed, also I have one that holds TWO! Please check my other downloads for more great…
As the original design, it's made to fit in most printers, with at least 220mm bed.
Update: for a new version of this model, including other sizes, gridfinity top and bottom and solid walls, please visit https://makerworld.com/en/models/1234733 Introduction A remix of the gridfinity 5x3x5 (3 drawers) case ( Hugo ' s…
All the credit for this one goes to the original designer mjmedien on Thingiverse. All I did was to add a comb to it in order to make it stay on someone's head a little easier for my daughter's school skit. The comb prints flat on the bed…
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Please give it a 💖 if you like it 🥰 🪧 My 8 colors Splitter for Kobra 3 👉 https://www.printables.com/model/1019258-8-colors-on-anycubic-kobra-3-combo-splitter-for-8 Please leave a comment if you have any possible improvements to make to…
When I became interested in the honeycomb storage wall, I thought that the hooks that I had designed for the IKEA Skådis board could be used on the honeycomb wall as well, so with some redesigning of the hooks and a customised inserts, I…
Watch the full video here to see how we created this: https://youtu.be/TwzH-t81MFw It's finally time to add Chomper to my list of Plants Vs Zombies characters on my shelf. I modeled Chomper in ZBrush. I mostly used Booleans for the head.…
Custom honeycomb storage wall sized to fit the build plate of a flashforge adventurer 3
Print straight, with the base of the hexagon where the hook comes out resting on the print bed. Does not require supports.
Bombardiro Crocodilo created in blender
UPDATE V1.1 I added fit testers. Modular drawers with infinite combinations make what you want like pixel art! So be creative and enjoy :D
Whistling bomb for rc planes drones.
![[HSW] Honeycomb Storage Wall](https://media.printables.com/media/prints/549195/images/4415987_066a37db-d65c-4a6e-b7a2-c28834eb0b59/flashforge.png)
