Search results: oms

Sort order

676 models

P
PrintablesTreasurousTrey

Cute 3D Nightlight Lighthouse For Nurseries and Childrens's Rooms

I was inspired by the song “My Lighthouse” by the band Rend Collective and wanted to work on my 3d modeling skills. So I designed a lighthouse and then added a base that would make it function as a nightlight for a more creative light…

Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
29
Rating
5
P
PrintablesJohan

Doorlatch for Thomson microwave oven

Door latch for microwave oven Thomson Microwave Oven COMBIMAT 25. But I would not be surprised if it fits other models and brands as well since they all look alike. These door latches break off easily. Mine did as well and after numerous…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
58
Likes
1
Rating
0
P
PrintablesJakub Věžník

Smooth pocket box/case for condoms (durex), tampons, etc.

The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…

Downloads
2,399
Likes
496
Rating
4.56
P
PrintablesUniversalMaker

Magic Mushrooms - a lighted decoration | Mushroom Lamp

If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D This is a cool DIY lamp project. The Magic Mushrooms, were intended to be…

Downloads
2,185
Likes
1,526
Rating
4.91
P
PrintablesSTARK MOD

Mario Mushrooms [multi print] no ams needed!

Mario Mushrooms [multi print] no ams needed!

Downloads
1,919
Likes
681
Rating
5
P
PrintablesNachum Twersky

Mario Mushrooms

These mushrooms can be printed with a single extruder or be configured to print with a dual extruder for a cleaner effect. I also included the Poison Mushrooms body which has the 'Evil Eyes" if you want to try and make as many Mushroom…

Downloads
1,899
Likes
498
Rating
4.64

Gnoms

These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…

Downloads
1,887
Likes
481
Rating
4.91
P
Printableshervingarciaa

Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures

Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures Sarah Fortune, captain of Aguasturbias famous for her looks but feared for her brutality, is a stern figure among the port city's hardened…

Downloads
1,745
Likes
301
Rating
4
P
Printablesannarama

Crochet Basket Bottoms

I made some simple thin crochet basket bottoms in openSCAD. The wood ones are nice to look at, but if something gets spilled or you want to make a basket for the bathroom, it is nice to have something water resistent. Let me know if you…

Downloads
1,663
Likes
766
Rating
4.89
P
PrintablesmoWerk

Broom Handle Bracket / Broomstick Mount (4 sizes)

Remix of SD-3Ds broom bracket with added screw holes. Please also check the original posting which has been recently updated. This remix here also received the stabilization add in V2. Which SD-3D implemented when touching the original…

Downloads
1,219
Likes
580
Rating
5
P
PrintablesInaniaEtVana

Parametric Gridfinity Bottoms (Gridfinity model base)

Always wanted to make a 30x30 Gridfinity monstrosity? Well now you can. Or make something small. You know, whatever. There is a model that includes a wall and stacking lip, just a wall, or only the base Gridfinity elements. They all abide…

Downloads
1,126
Likes
119
Rating
0

Mushroom Mage - Shooms Collection!

He's 3 inches tall but he ain't small! The magic flows like a mighty river through this one. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Downloads
1,122
Likes
338
Rating
5
P
PrintablesBishBoiii

Mushrooms by Artec

Created from a Decorative Garden Mushroom using an Artec 3D Scanner. The model has been checked for holes and given a flat base for printing. This STL was pulled from their gallery of models located at…

Downloads
1,087
Likes
201
Rating
5
P
Printablespcwzrd13

Hold Down Clamp for Atomstack Laser Cutter / Engraver Honeycomb Bed

A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…

Downloads
1,079
Likes
132
Rating
5

Toadstool Adventurer - Shooms Collection!

He's 3 inches tall but he ain't small! Watch your ankles around this fierce fighter. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Downloads
1,029
Likes
367
Rating
5
P
PrintablesJakub Věžník

Smooth pocket case for condoms (durex) that fits perfectly

I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…

Downloads
940
Likes
131
Rating
4.8
P
PrintablesTuna

Broomstick Spear Head

Should fit most broom threads, maybe plungers as well. Test file included. Print upright no supports. Bed slingers might want a brim.

Downloads
912
Likes
72
Rating
5
P
Printablescommandqueue

1913 Broomstick Grips

Vertical foregrips for 1913 rails modeled after the KAC VFG. No bolts needed, just align the grip body on the rail and tighten the grip screw. Print 1 standard or stubby grip body, and 1 respective screw. Print Orientation The STLs are…

Downloads
895
Likes
46
Rating
5
P
Printables3DPmom

Squishy Mushrooms (2 Sizes)

These Squishy Mushrooms came to life while I was designing my Fidget Garden. After some brief research and consulting with my family, it was decided mushrooms were not a traditional garden vegetable so they were voted out of the planter…

Downloads
890
Likes
180
Rating
5
P
PrintablesShiaic3D

Ruins - Two Rooms

This is a kitbash. All of the parts can be found separately on Thingverse. Category: Buildings & Structures

Downloads
881
Likes
114
Rating
5
P
PrintablesBrave 3D

marshmello DJ (Christopher Comstock)

Behold the ultimate mashup of music and miniatures – a Funko-style Marshmello model that’s ready to drop beats on your shelf! This quirky 3D print captures Marshmello’s signature look with an oversized head, minimalist mask, and a playful…

Downloads
788
Likes
150
Rating
0
P
PrintablesStigern

Death Blooms – Ornamental Skull with Roses

🌹 Death Blooms – Ornamental Skull with Roses Bring a touch of gothic elegance to your 3D printing collection with Death Blooms , a hauntingly beautiful skull design entwined with blooming roses. This striking piece blends organic detail…

Downloads
785
Likes
205
Rating
5
P
PrintablesDeMamba Prints

Fairy Sitting on Mushrooms

Used Poly.cam to scan a sculpture of a Fairy Sitting on Mushrooms. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…

Downloads
762
Likes
114
Rating
4.75
P
PrintablesCurious Mint

Lego Compatible Broomstick - Harry Potter

Lego compatible broomstick accessory for Lego Minifigures

Downloads
704
Likes
142
Rating
5
P
Printablespavel benes

Mushrooms Wall Art

Mushrooms Wall Art

Downloads
679
Likes
188
Rating
5

Mushroom Bard - Shooms Collection!

3D model of a mushroom adventurer bard holding a lute, ready to wander and perform songs from the forest floor. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from…

Downloads
671
Likes
239
Rating
5
P
PrintablesMartinCrow

Halloween Decoration - Witch on a broomstick

Halloween Decoration - Witch on a broomstick

Downloads
668
Likes
136
Rating
5
P
PrintablesGuyonacouch

Bic Ligher Case 'Shrooms

I printed this using an orange/green/blue tri-color filament. It's trippy, man.

Downloads
656
Likes
123
Rating
5
P
PrintablesArjunPrints

Complete Atom Set - 1,2,3,4,5, and 6 Bond Atoms! (Compatible with most retail sets)

This set is meant to be printed with PLA, with the exception of the long bonds, which should be printed with TPU to ensure the flexibility required to make certain molecules. The colors I used is as follows: Oxygen (Red): 2 bonds Hydrogen…

Downloads
652
Likes
388
Rating
5
P
PrintablesAnarkyArt

Backrooms

If you have a smaller 3D printer, Print 1 File at a time (2 prints total)

Downloads
527
Likes
78
Rating
5
P
Printableslosscutmajin

heart and cherry blossoms cookie cutter

I was able to successfully cut out the cookie dough by chilling it sufficiently, lowering the room temperature, and dusting it with flour.

Downloads
502
Likes
88
Rating
5
P
Printables3Demon

Doom The Dark Ages Doomslayer Helmet

This is a digital 3D printable model of Doom Slayer Dark Ages Helmet from DOOM: The Dark Ages . 📦 Included Files STL (cut for 200mm printer beds) Assembled OBJ file (for easy scaling) 3MF pre-colored file All cut parts are placed on the…

Downloads
489
Likes
172
Rating
0

Elder Fungus - Shooms Collection!

He's 3 inches tall but he ain't small! This fungus is the funniest and maybe the oldest. Collect them all! Shooms! Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…

Downloads
488
Likes
164
Rating
5
P
PrintablesGesh

Mushrooms

Every mushroom umbrella has its own "insert" with corresponding number. Every "insert" with an umbrella fits to every "stem" to make different combinations and more realistic forest. The fit between the parts is pretty loose, so you can…

Downloads
465
Likes
178
Rating
5
P
PrintablesCrazy3D

Easter Card with different blossoms

Easter Card with different blossoms If you like it --> press like it :-) Easter card in different sizes and with different blossoms. You can merge the gras with the stems by your own with your slicer. Just load the gras and the stems,…

Downloads
451
Likes
102
Rating
5
P
PrintablesPrusament

Prusament Mushrooms

This model was used as a sample model for Prusament PETG Ultraglow, the brightest glow-in-the-dark filament on the market. Read more about this material in our announcement article:…

Downloads
438
Likes
125
Rating
5
P
PrintablesHodges

Mushrooms

The mound is basic because it was designed to have moss hot-glued on top. The mound and stems are hollow to facilitate adding lights.

Downloads
415
Likes
102
Rating
5

Jury-rigged Boomstick 40mm airsoft grenade launcher

I did this over the weekend because I was bored. It's exactly the same as the Libra 40mm grenade launcher, just significantly more rock and stone than the original. It's not a perfect replica of the one in the game, but I did my best to…

Downloads
404
Likes
107
Rating
0
P
PrintablesYetti

Broomstick mount with thread/ Besenstielhalterung mit Gewinde

This is for Peggy Perfect threaded broom Easy to print, I use NoBuFil PCTG Alu Gray with 0.4 nozzles, 0.2 layers and variable heights 6 perimeters and only 25% filling gyroid Happy printing and a happy wife Dies ist für Peggy Perfect…

Downloads
378
Likes
26
Rating
4.5
P
PrintablesNoktur

ATOMSTACK A5 Laser Engraver air assist sideplate

I recently bought a Atomstack A5 diode laser and wanted to add airassist to it without removing the shielding around. So I desinged a replacement sideplate with a 1mm nozzle that fits a 4mm inner diameter silicone tubing. Print…

Downloads
367
Likes
12
Rating
3
P
PrintablesErikBF

Wallhook for brooms or other stuff

Made a wall mountable for my outdoor brushes, although I think this model can be used to hang other stuff inside/outside. made two holes for centering the screws for mounting in v1 Made two bigger holes for v2 material i used was petg…

Downloads
363
Likes
117
Rating
0
P
Printableshervingarciaa

Bust Lion-O from Thundercats by CG Pyro stl for 3d printing customs fanarts

Bust Lion-O from Thundercats by CG Pyro stl for 3d printing customs fanarts Lion-O is the son of Claudus, and is the leader and Lord of the ThunderCats. The series depicts his adventures from childhood to teenage/adulthood on the Third…

Downloads
360
Likes
59
Rating
0
P
PrintablesCollinsb

ATOMSTACK Cable Chain

Open, easy-to-install cable, less flimsy links, snappier clips, and less stiff and more flexible cable chain. I used m3x15 hex screws, locknuts, and washers for attaching to the laser, although the laser hole diameter was 4mm. See…

Downloads
356
Likes
39
Rating
0
P
Printablestoy4x4

FAST Print In-Spool Desiccant (Silica Gel) Container - Bottoms with threads cropped

I removed the top 2mm of the bottom so the lid would slip down just a bit so starting the threads is a little easier. Thanks PsychProd for the original!!

Downloads
356
Likes
52
Rating
5
P
Printableswedgeworks

Phone Storage Box Case Thing for Classrooms, Game Time and any other time you want them to put it away!

Sometimes one simply needs to have a way to store a LOT of phones. Maybe it's a classroom environment. Maybe it's game night at your house and you don't want your friends distracted (or cheating). Maybe it's a family gathering and you…

Downloads
346
Likes
17
Rating
0
P
PrintablesFLAM3S

Feet Atomstack X7 Pro

Printed it on my MK3S with PLA.

Downloads
324
Likes
31
Rating
5
P
PrintablesSzwalkiewicz

JMac Customs Cheek Riser

I'm in hopes some skilled cad chads can remix and upload new designs

Downloads
322
Likes
12
Rating
0
P
PrintablesLHB

Cookie Cutter - Ausstecher - Mushrooms

Collection of cookie cutter in form of mushrooms. Size can be modified +- 20% in the slicer. N joy

Downloads
316
Likes
46
Rating
5
P
PrintablesRegal_Prop-Shop

Regal - A24: Official Backrooms Collectible Popcorn Container

Regal has partnered with A24, to provide fans the ability to print their own Backrooms collectible popcorn container in celebration this unique film opening at Regal theatres May 29th. FREE POPCORN!!! If you print this out at full scale…

Downloads
305
Likes
27
Rating
0
P
PrintablesMarc

Atomstack Laser Feets

Füsse bzw. Halterungen für einen Atomstack-Laser zur Befestigung einer Grundplatte.

Downloads
298
Likes
27
Rating
0
P
PrintablesJohanTess

Atomstack X20 PRO raiser feet

Raiser feet for the Atomstack X20 PRO series. Raises the laser frame by 25mm. Included step and obj files for your own remix. The screen foot has to be placed first without the frame. Depending if you want the mounting screws in or out…

Downloads
297
Likes
25
Rating
0
P
PrintablesMiguelM

Broom Bracket for threaded broomsticks

The thread is set to fit 3/4" ACME (see pictures), wich is a standard broomstick thread at least in europe. The thread has been carefully set though a LOT of dimension iterations. A simple version is uploaded to edit. A 120º full bracket…

Downloads
290
Likes
91
Rating
0
P
Printableschal

Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets

The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…

Downloads
290
Likes
20
Rating
0
P
PrintablesHlaja

Positioning guide for Atomstack S10 Pro and Sculpfun honeycomb cutting mat (400x400)

Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…

Downloads
283
Likes
25
Rating
5
P
PrintablesFlorian Becker

Air Assist Atomstack M40

Air assist to get an accurate pointed airflow to the laser spot. This is for the Atomstack Laser Modul M40 (AST40W50S; 21K23) It replaces the laser shield and metal cone. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…

Downloads
281
Likes
18
Rating
5

Hermiona naughty on Broomstick

I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…

Downloads
280
Likes
40
Rating
0
P
PrintablesHedo3D

Atomstack A5 Laser air assist, tube support, tool holder

Note: You still have to clean the lens regularly before the laser. There is definitely smoke building up there! Update Feb 2021 V 2.2 better Airflow ------------------------------------------------------------------- Hier habe ich für…

Downloads
280
Likes
23
Rating
4
P
Printablespakkko

Universal Broomstick Coat hanger hook, Kleiderstangen Stangen Halter

Universal Broomstick Hanger Inner Diameter: 20mm Outer Diameter: 50mm Scale to your needs. If you like it, so give it a like here on thingiverse. And watch out for my other Designs: https://www.thingiverse.com/pakkko/designs Universal…

Downloads
271
Likes
12
Rating
5
P
PrintablesPawel

Baba Yaga Silhouette on a Broomstick

This model depicts Baba Yaga , the mythical Slavic witch, soaring through the air on her broomstick. It’s designed for 3D printing and can be used as a Halloween decoration, tabletop miniature, or fantasy collectible . You can print it…

Downloads
267
Likes
46
Rating
5
P
PrintablesMvTile

Atomstack A5/A5Pro limit switch mounts.

This is a set of bolt-on mounts for limit swotches for the Atomstack A5 and A5 Pro laser engraver series. The mounts are adjustable and they allow the usage of the hard endstops, therefore protecting the endstop switches form damage. The…

Downloads
267
Likes
20
Rating
0
P
PrintablesBrian

Ratchet for Kromski Harp Rigid Heddle Loom

The plastic ratchets that came with the original Kromski Harp Rigid Heddle Loom are prone to tooth slip and deformation under load. This design replaces the original pawl and gears with slightly thicker equivalents for better alignment…

Downloads
267
Likes
47
Rating
0
P
PrintablesKing Magmor

Spa from Spirited Away (with rooms inside)

3D modelled spa from the anime Spirited Away with all the rooms inside!!! This whole model is in "Voxel" style so it is cubed. Inside the model there are real rooms like in the movie.

Downloads
257
Likes
74
Rating
0
P
Printablesoceanprinter

Vertical Phone Box, suitable for classrooms

There are two versions: 30 phones (81.6x19mm slots, 250 x 207 x 70mm) Some phones with thick cases might not fit in this version. 16 phones (86x19mm slots, 176 x 166 x 70mm) This version has a lot of space for many phones.

Downloads
250
Likes
18
Rating
0
P
Printableshandyrandyrc

Stake with 3/4" ACME female thread - spear head for a broomstick

We needed to stake a broomstick handle into the ground for a signpost we were making. For best results, print it ON ITS SIDE with some support. It will want to break apart if printed "pointy side up". For more about the signpost:…

Downloads
245
Likes
24
Rating
0
P
PrintablesJeryoart

Rabbit Among Spring Blossoms – Easter Bunny Relief

Design Concept The sculpture features a charming Easter bunny seated amongst beautifully crafted spring blossoms, symbolizing new beginnings and festive joy. Purpose This relief is perfect for adding a touch of Easter spirit to your home…

Downloads
243
Likes
64
Rating
4.5
P
PrintablesSidious 01

Drehvorrichtung für Atomstack s10 pro

Vorrichtung oben und unten aus PLA gedruckt Adapter M12-M6 + Achse/Axis aus 1.4301 Kugellager/Ball-Bearing : https://www.ebay.de/itm/222526238773 Schrittmotor / StepperMotor: https://www.ebay.de/itm/392557822271 Antrieb / Drive:…

Downloads
242
Likes
39
Rating
5
P
Printablespoiqwe29

Glowing Mushrooms

Reupload from DasMia on Culta (current Printables user: https://www.printables.com/social/9303-dasmia/about).

Downloads
237
Likes
96
Rating
0
P
PrintablesBooks

Cartoon Mushrooms

Public domain mushroom model by squibblejack . Originally uploaded to Blend Swap .

Downloads
234
Likes
45
Rating
0
P
PrintablesMoxL

Universal Broomstick Coat hanger hook

Broomstick Coathanger Broomstick is 25mm Google: 25 millimeters = 0.984251969 inches Scale according your needs. I didnt have conical screws, but I made a chamfer for it for a more universal mount. V2 created on receiving feedback from…

Downloads
232
Likes
91
Rating
5
P
PrintablesOwny
18+

The source marked this model as adult content.

Downloads
232
Likes
47
Rating
0
P
PrintablesLenka Grácová

Knitted mini mushrooms

~ adorable mushrooms to decorate your house ~ 🍂🍁 Autumn is almost here and this quick cute print will help to happen it sooner. Easy, only two color and knitted. Marvelous combo! UPDATE! To print these in two colors without automatic…

Downloads
229
Likes
68
Rating
5
P
PrintablesJon Lê

The DoomScroller, a smartphone tripod for the COVID-19 pandemic

Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…

Downloads
222
Likes
45
Rating
4.75
P
PrintablesBodo Runde

OpenLock HeroQuest Rooms

dranac73 did an awesome job to design the floor pieces for heroquest. As I decided to use OpenLock for RPGs terrain I adopted this beautiful work to OpenLock. I startd with the 4 most iconic rooms. They printed well, they should print…

Downloads
214
Likes
28
Rating
0
P
Printablesfuferman

swiffer broomstick (paint pole) adapter

This will allow you to use a standard broomstick or paint pole on a normal swiffer. the normal handle is super flimsy and I use the swiffer wet pads that can sometimes need some down pressure to scrub off a mess. using a normal broomstick…

Downloads
211
Likes
28
Rating
5
P
PrintablesHackjaz

Hextraction Backrooms Tiles Remix

This remix of Zack Freedman’s Hextraction Backrooms Tiles & Cards was done primarily to correct/update the rules text on the Backrooms Entrance Card & to remove the built-in sacrificial supports on both tiles as most printers should be…

Downloads
211
Likes
35
Rating
4.5
P
PrintablesOliver3Deeg

3d Drums: 6" + 8" Concert-Toms

6" + 8" Concert-Toms My first REAL usable great sounding drums... Easy to print… Change the colour of your Filament after about 5mm printing hight, so you get a cool-looking ring… The mounting-system needs this special drumlug with a…

Downloads
202
Likes
52
Rating
0
P
PrintablesL1arParadox

Slipknot Mick Thomson mask

This is mick Thomson mask. I did not design this. I got it from makerworld and reuploaded it onto printables.

Downloads
199
Likes
19
Rating
0
P
PrintablesOliver3Deeg

3d Drums: Camouflage Concert-Toms 6" 8" 10" - Multicolour Print

Camouflage Concert-Toms 6" 8" 10" - Multicolour Print Great sounding Concert-Toms in 6" 8" and 10" printable at once with my Multicolor Printer - Bambulab X1 + AMS 4 Colors I have been working on this design for several years now… and…

Downloads
188
Likes
22
Rating
0
P
Printablesvhdirk

Simple broomstick filament shelf

A remix for broom sticks of 23mm diameter. Includes fusion360 file to adjust to your broomsticks

Downloads
187
Likes
24
Rating
5
P
PrintablesRedStar3DP

Broomstick Spearhead [Kenteclaat Remix] (Modified threads)

Printed in ABS at like 20% gyroid infill with 2 or 3 perimeters and it feels pretty strong

Downloads
187
Likes
31
Rating
0
P
PrintablesMyst1c

Knit & Knot Mushrooms

Bring a cozy, modern touch to your space with this set of mushrooms! Designed with a stylish contrast between smooth curves and a rich, woven rope-like texture, these mushrooms are perfect as desk decor, shelf accents, or seasonal indoor…

Downloads
186
Likes
96
Rating
5
P
PrintablesAlchemic Matter

Bioluminescent Mushrooms - Mycenia Singeri

Bioluminescent is a natural phenomenon that never ceases to amaze, especially in fungi. This is a model inpired by the bioluminescent mushroom Mycenia Singeri and uses a glow in the dark filament. Keep your pot plants company with a…

Downloads
182
Likes
47
Rating
0
P

Broomstick screw

if the screw breaks you have to change the whole stick, or use this spare part. The screw is tapered, so it should fit all brands.

Downloads
181
Likes
23
Rating
5
P
Printables3dgeprintnl

Scholar Gnome – Wisdom Among the Mushrooms

The Scholar Gnome is a true lover of books and peace. Sitting comfortably on a mushroom, he’s completely absorbed in his latest read, radiating calm and charm. This beautifully detailed model adds a touch of magic and serenity to any…

Downloads
180
Likes
37
Rating
5

Doomspire Roblox

The towers from Doomspire Roblox game

Downloads
179
Likes
9
Rating
0
P
PrintablesFlorian

Shallow Drawer Organizer Trays (with thicker bottoms)

These trays are a sturdier version of the original with more sizes and larger grid options.

Downloads
174
Likes
49
Rating
0
P
PrintablesSimonS

Modular Hex Planter Stand Using Standard Broomsticks

It's a modular planter stand that is made only from 3D printed parts and standard broomsticks. This stand can be adjusted and designed as you wish by simply printing more parts or adjusting the height. For easy assembly I suggest to first…

Downloads
173
Likes
194
Rating
0
P
PrintablesBrave 3D

Judy Álvarez Cyberpunk 2077 Funko Chooms

All right, chooms, time to spool up your printer and bring a slice of Night City straight to your shelf. Feast your optics on this 3D blueprint of our favorite braindance techie, Judy Alvarez—done up Funko Pop style for maximum…

Downloads
171
Likes
40
Rating
3
P
PrintablesEx0Byte

Doomslayer mark 120mm PC case fan grill

Layer height can be a bit higher (I did .25mm) since detail in the Z direction doesn't really matter. I didn't get any rubbing against the fan blades, but if that is an issue for you I included an STL for a 1mm spacer you can add to your…

Downloads
169
Likes
29
Rating
0
P
PrintablesCollecti Craft

DOMS - Desk Organizer Modular System

DOMS (Desk Organizer Modular System) is a modular desk organizer created to bring order and flexibility to your workspace. The system is based on three different component sizes that can be stacked, slid, and rearranged in countless ways…

Downloads
168
Likes
84
Rating
0
P
Printableshurzhurz

Atomstack A5 Z-Axis

Motorized Z-Axis for Atomstack A5. (with mount for 3D touch sensor like BLTouch) Effective Z-axis travel is between 100 to 110mm. Additional weight on X-axis carriage is about 300 grams (690 -> 990). Y-axis travel is reduced by about…

Downloads
167
Likes
33
Rating
0
P
PrintablesDaniel Scott

Two Rooms and a Boom Party Game

This is a 3D printable version of the party game Two Rooms and a Boom! This set can be played with up to 38 players, and includes a hand picked selection of some of the best cards in the game. See more about the game here -…

Downloads
167
Likes
19
Rating
0
P
PrintablesKnighthash

Gravity Broom Holder TPU Ring for Slippery Brooms

I decided to print a TPU ring for the Gravity Broom Holder because my Broom was slick and it wouldn't catch. The orginal designer mentioned using a rubber band but I thought using TPU may last longer. I did try printing the gear in just…

Downloads
166
Likes
24
Rating
5
P
PrintablesSpicyLimes

The Backrooms - Logos, Badges, Emblems, and Plaques

'The Backrooms' is one of my favorite video curiosities, and as such, I decided to find, design, and print logos, door plaques, and badges. I uploaded a few photos of the designs that I ended up printing as of post, but some of them I…

Downloads
165
Likes
12
Rating
0
P
PrintablesCoat

Atomstack A5 Pro PSU-mount

A PSU-mount for the Atomstack A5 Pro laser engraver. I assume it also fits on the non pro. Makes it a little easier to put it aside. PSU-dimensions are ca. 113x50x33. Mount it with some short M4-bolts and T-nuts. Check if it fits before…

Downloads
164
Likes
23
Rating
5
P
PrintablesblueMage

Mushroom Lamp with Fiberoptic Little Mushrooms

This particular mushroom lamp has small fiberoptic accent mushrooms in the base and is best with different cap and accent mushrooms colors for variety and contrast. A 7-LED Neopixel jewel with fiberoptic adapter is installed in the base…

Downloads
162
Likes
67
Rating
0
P
PrintablesShionS

Initial Washrooms triangular key

A small key for opening Initial-branded air fresheners/seat sanitiser dispensers etc.

Downloads
156
Likes
4
Rating
0
P
PrintablesbOBERmASTER

Atomstack A20/S20/X20 mount with adjustment

mount with adjustment for Atomstack A20/S20/X20 model fill >= 50% for assembly with laser you need: mount x3 mount2 x1 m5 screw 12-15mm x4 m5 nut x4 5mm washer x8 (optional)

Downloads
156
Likes
17
Rating
5
P
PrintablesHlaja

Positioning guide for Atomstack S10 Pro engraver/cutter

This simple sheet slides onto the left front foot of the engraver. Easy positioning of materials fitting their left lower corner onto the origo. No need for any modifications, just snap it onto the left front foot. Printed 0.2, PLA on…

Downloads
155
Likes
18
Rating
0
P
PrintablesReddaux

Mushrooms for Giant LEGO Wreath

A couple of autumnal mushroom cluster studs for @MagnumDanger's giant LEGO holiday wreath. I printed these with supports and finished with a little acrylic paint. Thank you @BishBoiii for the original mushroom model. Wreath can be found…

Downloads
154
Likes
84
Rating
0