224 models
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
Tatooine Moisture Vaporator
Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant
This is a snap on handle for Home Decorators Collection cellular blinds. The blinds are quite nice, but it is difficult to pull the blinds all the way to the window sill since there is no handle to push down on. I designed a minimalist…
Print approx. €5.41–€6.61 excl. taxPreliminary estimate for PETGSource material: PET
Fuente de alimentación para laboratorios, realizada con un fuente de PC ATX. Medidas de la Fuente de alimentación. Alto: 85,50mm. Ancho: 150,50mm. Largo: 140,50mm. Hay un fichero stl. llamado CAJA_FUENTE_ATX_CON_3.EV.stl Este fichero…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Aperture Laboratories key ring. Use a layer height of 0.15mm Add a change of color in layers: 16, 18, 19, 20. Color goes in this order: -Black -White -Blue -Orange Printed on a Prusa mk3s+
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This is the replacement coupler for the Wilton Dessert Decorator Plus. The original breaks pretty quickly. There are no replacement parts that can be purchased so I created one. It works well but needs to be printed in very high quality…
Print approx. €1.90–€2.33 excl. taxPreliminary estimate for one variant
A S oapBox is a raised platform on which one stands to make an impromptu speech, often about a political subject. The term originates from the days when speakers would elevate themselves by standing on a wooden crate originally used for…
Print approx. €11.33–€13.85 excl. taxPreliminary estimate for PETGSource material: PET
I put the Aperture Laboratories Logo on the Topper. This is made in Fusion 360.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Print approx. €19.90–€24.33 excl. taxPreliminary estimate for PETGSource material: PET
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for PETGSource material: PET
-Imprimir todo por separado ya que es bastante grande y son muchas horas de impresión. -No requiere de mucho relleno, con un 10% es mas que suficiente para que sea resistente. -Las roscas es importante imprimirlas en vertical para que…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
It is a laboratory table made of 20x20x1.5 aluminum profiles made of www.aluhobby.cz and connectors printed on a 3D printer. The table is equipped with 2 shelves 1000x500x19 mm. The table is used for mounting a small distillation column…
Print approx. €5.44–€6.64 excl. taxPreliminary estimate for PETGSource material: PET
This is for anyone with this particular model that experienced the same issues I did. The freezer stopped working 3 months after I got it, and warranty repair or replacement was refused. I had no choice but to attempt to fix myself. The…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
Print Z=0,2 perimeter=5 infill=50
Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
Portal Aperture Laboratories Keycap printed with White and Black
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
A stencil of the Aperture logo from the Portal games designed to be used with fabric paint for my Chell cosplay
Remix to support large American decorator shaped switches and optional extended version to provide more connection studs. Print with supports.
Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…
I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…
This is a slightly adjusted version of @dietervdf's paper guide for an ordinary Leitz 5008 perforator. The adjustments in comparison to the original can be found in the git repository . Print Settings Printer Brand: Creality Printer:…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
This is a REMIX from a model originally extracted from a game, edited and shared by Matt Fritz @mfritz I wanted a smaller, easy to carry AKS74-U version, like the Pink Perforator from COD MW, I create a entire new short barrel and…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
Holder for 13 vacutainer vials, easy print, no support needed
A simple holder for 10 SDS or SDS Plus bits for a rotary hammer (impact drill/perforator) Features latches and guides so the bits go in the right way and stay in place No additional components required, no assembly, no supports. Prints on…
The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading
Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…
When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…
Dee Dee from Dexter's Laboratory
GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…
A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Dexter from Dexter's Laboratory
This "Hood"/Bracket allows you to evenly disperse foaming evaporator coil cleaner when replacing cabin air filters in the Tesla Model 3. Remix of https://www.thingiverse.com/thing:4861123 inspired by:…
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
Breadboard holder with laboratory plugs Breadboard:…
The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…
I had planned to submit it for last years Christmas competition, but it wasn't finished on time. Hope you enjoy! This is 100% designed by hand by me in fusion 360. No AI garbage I recommend you have two people for this, one to hold the…
Screwless (hidden screw) Decorator Wall Switch Plate. Hide the screws with these snap on cover plates for clean modern appearance. Multiple styles and sizes. Cover snaps onto the base to hide the screws (screws Not Included). Mix base and…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Aperture Laboratories Plate that covers the USB port on the Creality K1.
PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm
Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…
My simple version of a vaporator like the ones found at Lars homestead. Only parts that need supports are the out bits. There are 3 variations of section 3 that can be printed. Section 4 can only be used if option 1 was used for section…
HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos
Si tratta di un supporto per una perforatrice quadrata (quadrato da 6mm) acquistabile su aliexpress/amazon che vi permetterà di forare floppy disk 5 1/4 sul lato opposto per utilizzare anche la seconda faccia dello stesso (deve essere…
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…
Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
Just a normal chemical laboratory glass tube, but with the screw.
Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!
El archivo STL viene en una escala algo pequeña, pero se puede escalar en tu laminador preferido si así deseas.
I like the original lab scoop , but it was a little short, and I found the print layers lead to powder getting stuck more than is ideal. Made it longer and made two versions, the closed-head one should prevent stuff getting stuck as much…
Trichterhalter für 8 mm Laborstativ. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthe
laboratory/microscope glass box for storing glass with tissue sample
Printed on an FDM printer with 4 wallcounts and 50% infill.
This is a replacement cap for the old version of the pampered chef icing decorator. I designed it a bit sturdier than the original cap. The spherical indicator on the cap will line up with the rectangular indicator on the tube to make cap…
This for the ring that holds the cake decorator nozzle on for model 1775. This is for the model that has two tabs that lock in place and not the newer threaded 1776 design. This ring is known for cracking. I would suggest hand washing…
This is a useful laboratory clamp to connect 4 pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version this is a simpel parallel version you…
An easy to print and assemble to be used directly, be for school project or at home. Takes a small place when in storage. Laboratory Burette Holder, including an clamp for test tubes. One of the must have in the home laboratory, school…
A stand for small objects in your laboratory. I designed it for test tubes, but it can be used for almost anything small and cylindrical. If you have more than one, you can easily link them together for a tidier bench. You will need some…
This is a lab drying rack with a metal backplate. Aimed to be sleek, made of stainless steel with plastic pegs. Inspired from systems for sale online from lab supply stores that sell for thousands of dollars. Print the pegs with 100%…
Design Concept The model features a playful concept where a beloved character is enthusiastically decorating a Christmas tree. It's designed to bring a festive touch and a sense of joy during the holiday season. Purpose This model serves…
Это подставка для пробирок!
Convierte tu fuente de PC ATX a una de laboratorio variable Salidas de energia: 3.3 v 5.0 v 12 v Regulable 1.5 - 12v Se incluye diagrama para regulador de voltaje LM317 PARAMETROS DE IMPRESION Relleno: 40% Soportes: Si Material: PLA,…
Perforator Mount for Leitz 5008 on Ikea Skadis Pegboard
In memory to the animals that contributed to science
I use those brown 500ml glas lab bottles to store my tea. The original caps are made of black bakelite which breaks quite easily. So I made this cap which also takes the sealing insert of the original cap. I printed from PLA with 2 walls…
This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab. The construction is a single compact piece…
Replica of a rotary evaporator used in a chemical laboratory. It needs support to be printed and I would suggest using at least 0.12 mm layer height for a more detailed result.
Сontainer for laboratory glasses. They use magnets 5Х2.
Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed…
Geekvape Wenax S3 Stand - Magic Laboratory A Stand for Geekvape Wenax S3 e cigarette. Stylish, handy and exaclty your thing! It holdes your Geekvape Wenax S3 nice, but has some space for tollerances or possible sleeves you may put over…
Heyho :) I use perforated plastic bags to make my own tempeh. You can also buy these bags, but they are quite expensive. With this simple help you can evenly punch holes in your bags yourself. Depending on how many holes you want, you can…
Premise Sometimes glass is not the best material in laboratory. Specifically if you work with resins or materials which could destroy the glassware. For this reason polypropylene (PP) equipment can be used. This beaker serves mainly as a…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
There are 3 pieces, 2 of them are the covers for Park or Slick Honey grease tubs. The other is of the Radar Laboratories grease syringe. You can also use it for other grease gusn. Glue the Grease Syringe Fitting onto the tops with super…
