Counting matching models…
A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away. This model is an easy print that requires no supports, and three…
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Für SD-Karte, Stifte, Taschenrechner, usw.
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…
V2 : increase of the mecanical play of the axis to avoid that the two parts are welded during printing. Improved closure. Just change the dimension in fusion 360 to resize it.
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
This is an UPDATED/redesigned 2.0 version of my insert and organizer for the board game “Wondrous Creatures". It will help organize the game and facilitate quick setup, teardown, and gameplay. It can hold everything from all the…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
All variations of the Gridfinity cell that I have made include a label tab and part scoop for easy access.
This is a reverse engeneered design of the Azeron Cyborg II. There are 30 programmable switches and one analog joystick. It runs on an Adafruit KB2040 board with an Adafruit MCP23017 GPIO expander for more pins to connect switches to. The…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
This is a set of sorting trays I made for my maker space. I found myself needing small containers often and decided to design a few small trays. Exported from Fusion360 CAD in high resolution(smooth curves). Internal curve is for smooth…
This is a modified version for the very common light bar used on Flashforge AD5M and AD5X printers. Includes a secondary cut-out so that desoldering will not be necessary. Also lengthened the ends to allow the 230mm long light bar to fit.…
An organizer for 7 EDC pocket items such as typical sized pocket knives and mulitools. Deep finger notches are provided for easy access. A 30mm tall bottom / basement bin is included to raise the height of the bin to be suitable for ~90mm…
This is my re-imagination of S3D's Modern Desk Organizer . I was looking for a little Tray for my Everyday Carry like my Mini Wallet, Airpods, Keys and Coins. I saw the Originzer from S3D and i liked the Retro Charme but it didn't work…
Hello, I have made a documents organizers for HSW system. I have some instructions in A5 or smaller format, so I decidecded to creathe this project. I have used hexagonal pattern to limit filament consumption. Also looks cool with HSW…
Alternative Dry Box Plug (Easy-Print PLA Design) This plug is designed for the FlashForge dry box as a simpler, more print-friendly alternative to the original TPU plug . The geometry has been intentionally simplified to reduce overhangs…
Ein offenes System samt Toolbox und Sprühdosenhalter für den Flashforge Adventurer 5M Pro. Es sind sowohl Halter (Haken) für die Seiten (kurze Version), wie auch für die Rückwand (lange Version) enthalten. Wie immer ist das Projekt offen…
I designed these organizers and boxes specifically to fill the narrow gap between the wall and my workbench (30 mm wide). They are perfect for storing screws, nuts, small tools, and other workshop essentials. Each box is designed to fit…
I love the OpenForge Watchtower, and immediately thought how cool it would be as a dice tower. So I created this as one piece to print at once. Scaled to 200mm height. The steps and column of my added interior are smooth, but maybe one…
i finally got sick enough of needing a flashlight to see printed material behind where the toolhead happened to be that i decided to do something about it. none of the other models i found suited my needs, so i made my own using parts…
Ce projet est né d’un souvenir plus que d’un besoin. Dans les années 70–80, les bureaux d’école et les ateliers créatifs étaient des terrains de jeu. Les feutres traînaient dans des pots improvisés, des boîtes en plastique ajourées, des…
1-4 Mastercraft socket organizer for gridfinity All text is 4mm size and 1mm height above the rest, seems to be the sweet spot for my lil' Ender 3 V2 Metric v2 holds shallow sockets of sizes; 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm,…
Organizer for drill bits, screw bits, or other cylindrical items, based on Gridfinity. I made the dividers in two different depths for each length. 5mm and 9mm deep, where the 9mm matches the Dymo Omega Embosser (9mm). Printed i PLA on a…
Bring authentic medieval craftsmanship to your tabletop with this detailed blacksmith forge scene. Featuring a large stone furnace with chimney stack, working firebox, lower storage compartment, and tiled stone base, this terrain piece…
5 Battery Holder Models that each fit in a 4x2 Gridfinity space. Has Magnet holes on bottom. All of the models are 4 “gridfinity” units tall except the D battery model which is 5. The capacity of each of the models are: 8 D batteries 8 C…
Modified the AD5M mount to have access to place a switch to turn on the filter. Also removed the left side cutout for a cleaner look since I was only going to use the right cutout. Dimensions of the switch cutout: 19mm x 12.7mm Printed in…
Lower/white part's height is 1 mm, rims/black parts are also 1 mm (i.e. 2 mm total). Setting layer height to 0.20 or 0.25 mm is preferable for convenience of color change. Infill - 100%. Using ironing is advisable for all top surfaces to…
Organizers for tools, pens, SD cards, micro SD cards, and USB drives.
About These 2, 3, and 4 compartment dividers sit inside the drawers of a commercially available organiser. The organiser I purchased from Amazon UK is called "simpa 60 Multi Drawers Plastic DIY Tool Bit Storage Organiser Cabinet", but the…
Organizer for cables on testbench.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White for the rest.
Update: Created V3 that combines the 2 parts for the threaded shaft into a single part - I actually had printed it that way originally just joined the 2 parts in the slicer but no reason to have them separated. Update: Created V2 that…
A small organizer for perfume samples. Size 146 x 148.5 mm. Contains 10 cells of 28.9 mm, 12 cells of 23 mm and 16 round cells of 17 mm diameter.
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. The Model is 194.76x194.76mm in…
This is a webcam holder designed for the Flashforge AD5X 3D printer. It is primarily made for the Logitech C270 , but can also be adapted for other similar webcams. The mount can be used together with the original Logitech C270 mounting…
These PEI organizers work with the Gridifinity system. They will fit a 1 x 4 or 4 x 1 section of Gridfinity. These organizers are perfect for standard size printer PEI sheets (approx. 250mm x 250mm) or smaller. They are perfect for…
Flashforge mod for ERCF v2 featuring an entry sensor Pneumatic valve connector ensures filament doesn't pop-out during filament changes Entry sensor gives Happy Hare an additional sensor to work with during filament changes. Installation…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) TRAVELLER SCREW CAP BOX –…
Holds 5 perfume samples (1, 1.2, 2 ml).
I've been doing electronics for the past 2 years, and one problem I constantly run into is generating a mess of parts all over my desk! My hope is with this print, myself and those who print it will be able to stay organizer while…
.3mf files were sliced in Prusa Slicer for a MK4S, so you may have to adjust settings as needed. .25mm Structural standard settings Gyroid infill pattern at 15% HF 0.4 Nozzle 230/225 Nozzle temp 60 Bed temp There is a color change for the…
Deutsch Dieser Baadezimmer Organizer bietet Platz für… 2x Glas/Becher mit einem Bodendurchmesser von 67mm Ladestation von Oral-B IO 10 2x Bürstenaufsätze von Oral-B IO10 Ablagefach Das Fach der Ladebuchse ist so eingerichtet das diese…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x181.9mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Here is a small document organizer for your desk Added a reinforced version
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #19 (1.6mm) swap to White for the rest.
Tea pack organizer Modern and elegant tea pack organizer for you kitchen. When you have your friends over for tea party you can use it as a decoration for table. Tea organizer with 20 compartments for tea packs. Size of the organizer…
These are some test prints I made to help level my bed while it's printing. They are currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D, etc. It helps to see…
This is a 2x1 Gridfinity bin with cutouts to hold two Flashforge AD5X nozzles - and two lid options. Thanks to Chir and Jimoreno for the original designs.
Organizers for Graco paint sprayer nozzles. Includes organizer for 5 and 3 nozzles, smaller one includes holes for zip ties
Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
Keep all your small baking packets neatly organized! This 3D-printable storage box is designed to hold standard small sachets such as baking powder , yeast , vanilla sugar , thickening agents , and similar packets that tend to get lost in…
A simple organizer for small-sized pliers. size 97*90*60 mm section width 17 mm
UDPDATE ADD VER Engine Bracket AXIS V2.1 Engine Bracket AXIS V1 Model The X bracket differs from the original one. It does not hang in the air. The length of the guides has been increased ----What do you need----- 1.Insert nut M3*4*4.5…
Have you ever had cable all around? with this parametrizable cable organizer you can print whatever size you need. It is also possible to print it in a non symmetic way so that it could be stackable
Design in fusion 360 using the gridfinity design to make a simple labeled bin to hold needle files. Letters are raised for single color printers to add a pause for color change. Pocket dimensions are in the photos. Please like and share…
Organizer for tool box Qbrick sustem PRO 600 Basic
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 or joining my club here: https://www.printables.com/@Sortirus_659392#join.@Sortirus_659392.1094 Hello, for…
Printable 3D model. Vinyl tools organizer
-layer 0.20 -first layer height 0.14 -Filaments Used: PLA+ Basic-PLA+ Basic Black PLA+ Basic-PLA+ Basic blue PLA+ Basic-PLA+ Basic Orange PLA+ Basic-PLA+ Basic White *240mmX240mm but you can play whit colours
For all the nostalgic people (like me), I created a copy of the Metal Gear Solid 3 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
Hello, friends. I created a design organizer for usb/memory cards.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to rojo At layer #13 (1.12mm) swap to amarillo for the rest.
A simple bathroom organiser, to help me, organise my shavers ant their accessories. Dimensions (WxLxH): 96x170x50 mm Settings: Supports: No Resolution: 0.2mm Infill: 15% PLA, PETG Filament brand: any Filament color: any
Cherry Blossom Hueforge. I did this for my daughter and used silk Rose from CC3D, silk white, silk black from Ammoybaby, and silk silver from Hobby Lobby.
A simple Divided Desk Organizer
An organiser for your resistors. I wanted a way to keep resistors tidy, to hand, and easy know what resistor value you were grabbing. I did consider making it larger and spacing them out more, so that they were kept more separated, but…
Minimalist tape dispenser: Two types of diameter for the tapes: Big – 76.5mm Small – 32.0 mm No Support needed Infill – 5% or 10% Nozzle - 0.4mm Happy print =) ** Please contact me if you need to change the size.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual…
A simple model to organize and hold your MicroSD Cards!
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
(Note: The original file name "Masaüstü Kağıt Tutucu" translates to "Desktop Paper Holder" in Turkish.) I designed this practical desktop organizer to keep your workspace tidy and your note papers easily accessible. The staggered…
Double triangle desktop organizer
These are models of scalable trays, bases, or organizers for screws, bolts, and other small parts that are easy to lose. They are particularly useful for people working with models or electronics, where good organization is essential.
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
My city has started requiring that each household deposit organic waste from our home into the yard waste bin. In my kitchen I have a garbage and recycle bin but now needed a small organic waste bin. I bought a small leftover container…
Holds 4 bottles of enzyme additives. Text can be hidden or updated to fit needs (cylinders can be adjusted as well if needed). Text is raised and filament color change pause added to manually print text in a different color. Printed in…
You can ad designs ore other stuff if you want. I designed it in "fusion 360" and send the project to in ressources.
This is a gridfinity organizer for a Starrett Dial Indicator.
100% remplissage 2 parois, 1ère couche 0.2 puis 0.16 3 couleurs. Commencez par le noir 0.00 - 0.84 noir, 0.84 - 1.32 gris-bleu, 1.32 - 2.04 blanc neige-pur
This magnetic desk organizer is a clean and practical way to keep your workspace tidy. It’s perfect for holding small metal items like paper clips, screws, bits, needles, keys, or other magnetic accessories. With built-in magnets,…
Tray organizer for small items of no particular size. As you can see, originally designed to herd USB dongles. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2mm Linear Advance Infill: 20% Notes:…
needed a riser for the lid to the enclosure as I grew tired of comsntantlty taking it off and putting it back on. this minimises drafts whilst maximising air flow. even with the wobble it doesnt fall off and you can move it side to side…
Style meets functionality with Hexo Pod desk organizers. Intended to keep your desk space clutter-free and organized to decrease annoyances and increase productivity! All of the parts fit together so that you can customize the size and…
-layer 0.20 -first layer height 0.14 -Filaments Used: PLA+ Basic-PLA+ Basic Black PLA+ Basic-PLA+ Basic blue PLA+ Basic-PLA+ Basic Orange PLA+ Basic-PLA+ Basic White *240mmX240mm but you can play whit colours
Hold all cards sleeved. Has room for upgraded player order markers, and the scenario boards. The major stock and revenue markers can be hard to get out in the middle row, but I couldn't come up with a more elegant design that fit. You can…
Deutsch: Es handelt sich hier um einen Schlüsselorganisierer im Schweizer Taschenmesser Stil. Ich war es leid, meine Schlüssel auf herkömmlichen Wege lose in der Tasche baumelnd zu tragen, da mir andere Modelle in dieser Form jedoch nicht…
ORGANIZZATORE GT295 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
Screw Tray / Organizer A set of 6 screw trays/organizers for your screws. Ideal for printer repair, iphone repair, furniture assembly and other assembly needs. Feel free to remix this design to suit your needs. If you have any questions…
It's a small tray for computer screws and similar screws
Screw Tray / Organizer (different pocket sizes) Screw trays/organizers for your screws. Ideal for printer repair, iphone repair, furniture assembly and other assembly needs. This model has a selection of pocket sizes Feel free to remix…
